summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-1000.c
Commit message (Collapse)AuthorAgeFilesLines
* iwlwifi: set sm_ps_mode as part of cfg parametersWey-Yi Guy2009-11-231-0/+1
| | | | | | | | | | | | | Setting "Spatial multiplexing Power Save" as part of per device configuration parameter. Report to uCode based on priv->conf setting, so driver can have more control of how different devices should operate in power save mode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: fix iwl1000 "RTS/CTS for HT" merge damageJohn W. Linville2009-11-111-0/+1
| | | | | | | I may have botched my merge conflict resolution instructions for Dave... Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* iwlagn: invoke L0S workaround for 6000/1000 seriesBen Cahill2009-11-021-2/+2
| | | | | | | | | | | | Invoke workaround to avoid instability in L0->L0S->L1 transition on PCIe bus. Workaround disables L0S state so device moves directly from L0->L1. Workaround needed on all devices since and including 4965; add to 6000/1000. Describe bug and workaround better in comments. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: issue ct_kill host command based on device configWey-Yi Guy2009-10-271-0/+2
| | | | | | | | | Using device configuration structure to decide how to configure ct_kill host command. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: consolidate apm_init() functionsBen Cahill2009-10-271-3/+7
| | | | | | | | | | | | | | | | | | | | Consolidate most iwlXXXX_apm_init() functions into single iwl_apm_init(). Keep iwl3945_apm_init(), but leverage iwl_apm_init() for most functionality. Update 4965 init sequence to follow most recent factory recommendations. Add following members to struct iwl_cfg to guide the init sequence: pll_cfg_val (replaces needs_pll_cfg), set_l0s, use_bsm Move L0S enable/disable from nic_config() functions to iwl_apm_init(). This satisifies the "FIXME: put here L1A -L0S w/a" notice, and complies with factory-recommended sequence. Add debug info message in iwl_apm_init(), and symmetrical message in iwl_apm_stop(). Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: dynamic allocate tx queue structureWey-Yi Guy2009-10-271-0/+4
| | | | | | | | | | | Instead of always allocate the max number of tx queue structure, use dynamic allocation based on the number of queues in device configuration. With these changes, device does not have to allocate more memory than the h/w can support. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn, iwl3945: remove apm_reset() functionsBen Cahill2009-10-271-1/+0
| | | | | | | | | Clean up device-specific apm_reset() functions and library infrastructure, now that these reset() functions are no longer being used. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi/iwl3945 : unify apm stop operationAbhijeet Kolekar2009-10-071-1/+1
| | | | | | | | | Unify the usage of apm_stop_master and apm_stop across all hardwares. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: LED cleanupJohannes Berg2009-10-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | The iwlwifi drivers have LED blinking requirements that mac80211 cannot fulfill due to the use of just a single LED instead of different ones for TX, RX, radio etc. Instead, the single LED blinks according to transfers and is solid on the rest of the time. As such, having LED class devices registered that mac80211 triggers are connected to is pointless as we don't use the triggers anyway. Remove all the useless code and add hooks into the driver itself. At the same time, make the LED code abstracted so the core code that determines blink rate etc. can be shared between 3945 and agn in iwlcore. At the same time, the fact that we removed the use of the mac80211 LED triggers means we can also remove the IWLWIFI_LEDS Kconfig symbol since the LED support is now self-contained. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: add module firmware info for 1000 seriesHuaxu Wan2009-10-071-0/+1
| | | | | | | | The module firmware information of 1000 series is missing from iwlagn. Signed-off-by: Huaxu Wan <huaxu.wan@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: Chain Noise Calibration for 6000 seriesWey-Yi Guy2009-10-071-0/+2
| | | | | | | | Adding support of Chain Noise Calibration for 6000 series NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: update PCI Subsystem ID for 1000 seriesWey-Yi Guy2009-10-071-0/+20
| | | | | | | | | Update PCI Subsystem ID for 1000 series based on HW SKU. Adding new SKU for "BG" only devices. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: EEPROM version for 1000 and 6000 seriesWey-Yi Guy2009-10-071-1/+1
| | | | | | | | | Update EEPROM version requirement for 1000 and 6000 series of NIC for EEPROM version verification. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: Adjust blink rate to compensate Clock differenceWey-Yi Guy2009-10-071-0/+1
| | | | | | | | | | | | | | | | Adjust led blink rate to compensate on a MAC Clock difference on every HW. Led blink rate analysis showed an average deviation of 0% on 3945, 5% on 4965 HW and 20% on 5000 series and up. Need to compensate on the led on/off time per HW according to the deviation to achieve the desired led frequency The calculation is: (100-averageDeviation)/100 * blinkTime For code efficiency the calculation will be: compensation = (100 - averageDeviation) * 64 / 100 NewBlinkTime = (compensation * BlinkTime) / 64 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: separate nic_config for different NICWey-Yi Guy2009-10-071-1/+4
| | | | | | | | | | | | | | | | | | | | | | | Different NIC has different requirements for configuration. Currently all 5000 series hardware and later share the same configuration function even though they do not need the same configurations. Fix this by separating the needed configuration actions for each hardware model. .5000 series: L1-ASPM H/W bug work-around configure radio write CSR_HW_IF_CONFIG_REG for uCode use work-around for NIC get stuck after early PCIe power off .1000 series: write CSR_HW_IF_CONFIG_REG for uCode use setting digital SVR for 1000 card to 1.32V .6000 series: configure radio write CSR_HW_IF_CONFIG_REG for uCode use write CSR_GP_DRIVER_REG to indicate radio sku Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: fix 3945 ucode info retrieval after failureReinette Chatre2009-09-281-0/+2
| | | | | | | | | | | | | | | | | When hardware or uCode problem occurs driver captures significant information from device to enable debugging. The format of this information is different between 3945 and 4965 and later devices, yet currently the 3945 uses the 4965 and later format. Fix this by adding a new library call that is initialized to the correct formatting routine based on device. This moves the iwlagn event and error log handling back to iwl-agn.c to make it part of iwlagn module. Also remove the 3945 sysfs file that triggers dump of event log - there is already a debugfs file that can do it for all drivers. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: use station HT capabilities and BSS operating mode for Green-fieldDaniel C Halperin2009-08-201-0/+1
| | | | | | | | | | | | | | Green-field mode should be configured in the HT station table. This patch uses both the per-station GF support flag as well as the current BSS HT operation mode (non-GF stations present flag). Added the "ht_greenfield_support" field to struct iwl_cfg to replace the device-specific check in rs_use_green(). That check has been moved to iwlcore_init_ht_hw_capab(). Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: traverse linklist to find the valid OTP blockWey-Yi Guy2009-08-201-1/+3
| | | | | | | | | | | | | | | | | | For devices using OTP memory, EEPROM image can start from any one of the OTP blocks. If shadow RAM is disabled, we need to traverse link list to find the last valid block, then start the EEPROM image reading. If OTP is not full, the valid block is the block _before_ the last block on the link list; the last block on the link list is the empty block ready for next OTP refresh/update. If OTP is full, then the last block is the valid block to be used for configure the device. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: name changed from "fat" to "ht40"Wey-Yi Guy2009-08-141-2/+2
| | | | | | | | | Rename "fat" to "ht40" The term "fat channel" is deprecated in favor of "HT40" Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: Distinguish power amplifier for 6000 seriesWey-Yi Guy2009-08-041-1/+13
| | | | | | | | | | | | | | | | For 6x00 2x2 NIC, two types of Power Amplifier are available. In order for uCode to apply correct tx power, driver needs to program the CSR_GP_DRIVER_REG register and let uCode know the type of PA. If driver do not program CSR_GP_DRIVER_REG register (default to 0), then it is uCode's decision for tx power 2x2 Hybrid card: use both internal and external PA 2x2 IPA(Internal Power Amplifier) card: internal PA only Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: fix null pointer access during ucode load on 1000Reinette Chatre2009-07-291-0/+1
| | | | | | | | | | | | Commit "iwlwifi: Handle new firmware file with ucode build number in header" introduced new ucode header parsing routines, but neglected to initialize these routines for 1000. The system thus goes into infinite loop trying to load ucode, failing every time with a null pointer exception as it tries to parse the header. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: critical temperature enter/exit conditionWey-Yi Guy2009-07-271-1/+75
| | | | | | | | | | | | | | | | If advance thermal throttling is used the driver need to pass both "enter" and "exit" temperature to uCode. Using different critical temperature threshold for legacy and advance thermal throttling management based on the type of thermal throttling method is used except 1000. For 1000, it use advance thermal throttling critical temperature threshold, but with legacy thermal management implementation until ucode has the necessary implementations in place. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: update 1000 series API version to match firmwareJay Sternberg2009-07-241-1/+1
| | | | | | | | firmware file now contains build number so API needs to be updated. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: correct device name for 1000 seriesJay Sternberg2009-03-161-0/+73
device name was changed from 100 to 1000 Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud