summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/mac.h
Commit message (Collapse)AuthorAgeFilesLines
* ath9k: Remove some #defined constants to decrease verbosityBenjamin Berg2016-07-081-4/+0
| | | | | | | | | The removed ATH9K_SLOT_TIME_X constants simply map the value in microseconds to the same integer. These constants were not used consistently, so fix the inconsistency issue by replacing all occurances with the integer equivalent. Signed-off-by: Benjamin Berg <benjamin.berg@open-mesh.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath9k: fix phyerror codesZefir Kurtisi2015-10-281-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the ath9k_phyerr enums were wrong from the beginning (and even before). Most of the time the codes were used for counters to be displayed over debugfs, which made this a non-functional issue. Some (e.g. ATH9K_PHYERR_FALSE_RADAR_EXT) are used for radar detection and require the correct code to work as intended. This patch includes: a) fixes ATH9K_PHYERR_FALSE_RADAR_EXT: 24 => 36 ATH9K_PHYERR_CCK_LENGTH_ILLEGAL: 32 => 28 ATH9K_PHYERR_CCK_POWER_DROP: 33 => 29 ATH9K_PHYERR_HT_CRC_ERROR: 34 => 32 ATH9K_PHYERR_HT_LENGTH_ILLEGAL: 35 => 33 ATH9K_PHYERR_HT_RATE_ILLEGAL: 36 => 34 b) extensions ATH9K_PHYERR_CCK_BLOCKER = 24 ATH9K_PHYERR_HT_ZLF = 35 ATH9K_PHYERR_GREEN_FIELD = 37 Aside from the correction and completion made in the enum, the patch also extends the display of the related counters in the debugfs. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ath9k: add TPC capability to TX descriptor pathLorenzo Bianconi2014-11-251-1/+1
| | | | | | | | Add TPC capability to TX descriptor path. Cap per-packet TX power according to TX power per-rate tables. Currently TPC is supported just by AR9003 based chips Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix getting tx duration for dynackFelix Fietkau2014-09-301-1/+1
| | | | | | | | | | | | On AR9003, tx control and tx status are in separate descriptor rings. Tx duration is extracted from the tx control descriptor data, which ar9003_hw_proc_txdesc cannot access. Fix getting the duration by adding a separate callback for it. Acked-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: add duration field to ath_tx_statusLorenzo Bianconi2014-09-161-0/+1
| | | | | | | | | Add duration field to ath_tx_status in order to report frame duration for each entry in multi-retry chain. These fields will be used in ACK timeout estimation algorithm (dynack) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: set up tx power into the MRRLorenzo Bianconi2014-07-181-2/+8
| | | | | | | Set up tx power for each MRR segment in the tx descriptor Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Abort transmission for sleeping stationRajkumar Manoharan2014-05-191-0/+1
| | | | | | | | | | | | | | | | | | | | The data transmission to the power save station should be aborted immediately, whenever the station informs sleep state. Right now the frames queued into into hardware are being transmitted until the hardware detects the power save station based excessive retries of the data frames due to unacknowlegdement. Then remaining frames are returned with filetered status and might be retried later by driver or mac80211. Per WFA certification testing, AP should not send out more than two frames after processing nullfunc with PM bit set from associated station. To speed up tx filtering, the pending frames in hardware queues for given station will be aborted immediately via tx filter registers. This transmit filters can be ignored if the descriptor is having invalid destination index or clear destination mask set. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: use ath9k_cmn_process_rssiOleksij Rempel2014-02-121-6/+3
| | | | | Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: add support for reporting per-chain signal strengthFelix Fietkau2013-12-181-6/+2
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: remove sc->config.cabqReadyTimeFelix Fietkau2013-10-141-2/+0
| | | | | | | It is not exposed as a configuration option anyway Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Identify first subframe in an A-MPDUSujith Manoharan2013-08-151-0/+2
| | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: check for Rx-STBC flag and pass it to ieee80211Oleksij Rempel2013-05-301-1/+2
| | | | | | | | | | | This patch make use of STBC flag in DMA RX descriptor. Only devices after ar9280 can provide this information. If card support it we will set HAVE_STBC flag, to show clint programm thet STBC is supported but not received. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: remove useless flag conversation.Oleksij Rempel2013-05-301-0/+1
| | | | | | | | | some flags used only outside of ath9k - In this case we can use "enum mac80211_rx_flags" and pass it upstream without extra conversation. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: detect more kinds of invalid descriptorsFelix Fietkau2013-04-101-0/+1
| | | | | | | | | | | | | | | If AR_CRCErr, AR_PHYErr, AR_DecryptCRCErr or AR_MichaelErr is indicated in the rx status word, but AR_RxFrameOK is also set, the descriptor contents are typically invalid. This can show up as a warning about invalid MCS rates in a frame. Even with those checks in place, a descriptor with invalid MCS rates can still sometimes make it through to the driver (mostly on older hardware like AR91xx). Detect such errors in the last descriptor of a frame and discard the whole frame if present. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: add spectral scan featureSimon Wunderlich2013-01-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the spectral scan feature for ath9k. AR92xx and AR93xx chips are supported for now. The spectral scan is triggered by configuring a mode through a debugfs control file. Samples can be gathered via another relay debugfs file. Essentially, to try it out: echo chanscan > /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan_ctl iw dev wlan0 scan cat /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan0 > samples echo disable > /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan_ctl This feature is still experimental. The special "chanscan" mode is used to perform spectral scan while mac80211 is scanning for channels. To allow this, sw_scan_start/complete() ops have been added. The patch contains code snippets and information from Zefir Kurtisi and information provided by Adrian Chadd and Felix Fietkau. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix interrupt storms on queued hardware resetFelix Fietkau2012-08-101-0/+1
| | | | | | | | | | | | | | | | commit b74713d04effbacd3d126ce94cec18742187b6ce "ath9k: Handle fatal interrupts properly" introduced a race condition, where IRQs are being left enabled, however the irq handler returns IRQ_HANDLED while the reset is still queued without addressing the IRQ cause. This leads to an IRQ storm that prevents the system from even getting to the reset code. Fix this by disabling IRQs in the handler without touching intr_ref_cnt. Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: set 4ADDRESS bit in RX filter for AR9550Gabor Juhos2012-07-091-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove ath9k_hw_gettxintrtxqsFelix Fietkau2012-03-151-1/+0
| | | | | | | The driver can just check the mask directly Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: clean up tx completion interrupt handlingFelix Fietkau2012-03-151-2/+1
| | | | | | | | | TXQ_FLAG_TXOKINT_ENABLE and TXQ_FLAG_TXERRINT_ENABLE are always set and used together, and they share the same bitmask in enum ath9k_tx_queue_flags. Simplify the code that tests for these flags. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: fix a regression in key miss handlingFelix Fietkau2011-10-111-0/+1
| | | | | | | | | | | | | | | | | | | | The commit "ath9k_hw: Fix incorrect key_miss handling" changed the code to only report key miss errors if a MIC error wasn't reported. When checking the flags in that order in the MAC code, it might miss some real events, because the value of the MIC error flag is undefined under some conditions. The primary issue addressed by the previous commit is making sure that MIC errors are properly reported on the STA side. This can be fixed in a better way by adding a separate rx status flag for key miss and ignoring it for multicast frames. This fix slightly improves stability in AP mode on some older hardware, like AR9132. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: make ath9k_hw_set_interrupts use ah->imask by defaultFelix Fietkau2011-10-111-1/+1
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix retry counting / BAR handling during queue flushFelix Fietkau2011-10-111-1/+2
| | | | | | | | | When tx is suspended temporarily and the queue is flushed, do not increase the retry count or attempt to send out BAR frames. Instead simply retry the affected subframes normally after the reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: clean up hardware revision checksFelix Fietkau2011-09-191-4/+0
| | | | | | | | | - AR_SREV_5416_20_OR_LATER is always true, remove it - AR_SREV_9280_20_OR_LATER is always true within eeprom_4k.c and eeprom_9287.c - (AR_SREV_9271 || AR_SREV_9285) is always true in eeprom_4k.c Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove the old tx descriptor APIFelix Fietkau2011-09-161-1/+0
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: add a new API for setting tx descriptorsFelix Fietkau2011-09-161-1/+39
| | | | | | | | | | Instead of using lots of different functions with long argument lists, pull all the necessary information from one struct. This makes the code easier to read and eliminates the need for copying data between multiple linked descriptors. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Add initvals and register definitions for AR946/8x chipsets.Senthil Balasubramanian2011-09-161-0/+1
| | | | | | | Add initvals and register modifications required to support AR946/8x chipsets. Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: use u8 for the tx key indexFelix Fietkau2011-08-301-1/+1
| | | | | | | This saves some space in struct ath_frame_info Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add debugfs support for mac/baseband samplesRajkumar Manoharan2011-08-291-0/+1
| | | | | | | | | | | | | | This patch keep track of number of samples that includes DMA debugs registers, PCU observe, CR, channel noise, cycle conters, noisefloor history buffer and last N number of tx and rx descriptor status. These samples are grouped in table manner which dumping in debgufs. Debugfs file location: <debugfs_mnt>/ieee80211/phy#/ath9k/samples Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Remove unused argument tsf from ath9k_hw_rxprocdescRajkumar Manoharan2011-08-241-1/+1
| | | | | Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Drag the driver to the year 2011Sujith Manoharan2011-05-191-1/+1
| | | | | | | The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2011-04-261-1/+1
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * ath9k_hw: fix stopping rx DMA during resetsFelix Fietkau2011-04-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During PHY errors, the MAC can sometimes fail to enter an idle state on older hardware (before AR9380) after an rx stop has been requested. This typically shows up in the kernel log with messages like these: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/recv.c:504 ath_stoprecv+0xcc/0xf0 [ath9k]() Call Trace: [<8023f0e8>] dump_stack+0x8/0x34 [<80075050>] warn_slowpath_common+0x78/0xa4 [<80075094>] warn_slowpath_null+0x18/0x24 [<80d66d60>] ath_stoprecv+0xcc/0xf0 [ath9k] [<80d642cc>] ath_set_channel+0xbc/0x270 [ath9k] [<80d65254>] ath_radio_disable+0x4a4/0x7fc [ath9k] When this happens, the state that the MAC enters is easy to identify and does not result in bogus DMA traffic, however to ensure a working state after a channel change, the hardware should still be reset. This patch adds detection for this specific MAC state, after which the above warnings completely disappear in my tests. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Cc: Kyungwan Nam <Kyungwan.Nam@Atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: fix powersave frame filtering/buffering in AP modeFelix Fietkau2011-04-191-1/+0
|/ | | | | | | | | | | | | | | | | | This patch fixes a long standing issue of pending packets in the queue being sent (and retransmitted many times) to sleeping stations. This was made worse by aggregation through driver-internal retransmitting of A-MDPU subframes. Previously the hardware tx filter was cleared unconditionally for every single packet - with this patch it uses the IEEE80211_TX_CTL_CLEAR_PS_FILT for unaggregated frames. A sta_notify driver op is added to stop aggregation for stations when they enter powersave mode. Subframes stay buffered inside the driver, to ensure that the BlockAck window keeps a sane state. Since the driver uses software aggregation, the clearing of the tx filter needs to be handled by the driver instead of mac80211 for aggregated frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: improve reliability of beacon transmission and stuck beacon handlingFelix Fietkau2011-03-141-1/+1
| | | | | | | | | | | | | | | | | | ath9k calls ath9k_hw_stoptxdma every time it sends a beacon, however there is not much point in doing that if the previous beacon and mcast traffic went out properly. On AR9380, calling that function too often can result in an increase of stuck beacons due to differences in the handling of the queue enable/disable functionality. With this patch, the queue will only be explicitly stopped if the previous data frames were not sent successfully. With the beacon code being the only remaining user of ath9k_hw_stoptxdma, this function can be simplified in order to remove the now pointless attempts at waiting for transmission completion, which would never happen at this point due to the different method of tx scheduling of the beacon queue. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix stopping tx dma on resetFelix Fietkau2011-03-141-0/+1
| | | | | | | | | | | | | | | | | | | In some situations, stopping Tx DMA frequently fails, leading to messages like this: ath: Failed to stop TX DMA in 100 msec after killing last frame ath: Failed to stop TX DMA! This patch uses a few MAC features to abort DMA globally instead of iterating over all hardware queues and attempting to stop them individually. Not only is that faster and works with a shorter timeout, it also makes the process much more reliable. With this change, I can no longer trigger these messages on AR9380, and on AR9280 they become much more rare. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Add RX filtersSujith Manoharan2011-01-281-0/+2
| | | | | | | | The HW has separate filter masks for compressed/uncompressed BlockAcks and BlockAckRequests. Add them. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove ath9k_hw_stoppcurecvFelix Fietkau2010-11-241-1/+0
| | | | | | | It is no longer used anywhere Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: optimize all descriptor access functionsFelix Fietkau2010-11-091-2/+2
| | | | | | | | | | | | | Because all of the descriptor data structures are marked as __packed, GCC assumes the worst case wrt. alignment and generates unaligned load/store instructions on MIPS for access to all fields. Since descriptors always have to be 4-byte-aligned, we can just mark the data structures with __aligned(4), which allows GCC to generate much more efficient code. Verified through disassembly and OProfile comparisons. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: optimize tx status descriptor processingFelix Fietkau2010-11-091-3/+0
| | | | | | | | | | | | Disassembly shows, that at least on MIPS, the compiler generates a lot of memory accesses to the same location in the descriptor field parsing. Since it is operating on uncached memory, this can be quite expensive in this hot path. Change the code a bit to help the compiler optimize it properly, and get rid of some unused fields in the ath_tx_status struct. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: optimize interrupt mask changesFelix Fietkau2010-11-091-2/+4
| | | | | | | | | | | | | | | OProfile showed that ath9k was spending way too much time in ath9k_hw_set_interrupts. Since most of the interrupt mask changes only need to globally enable/disable interrupts, it makes sense to split this part into separate functions, replacing all calls to ath9k_hw_set_interrupts(ah, 0) with ath9k_hw_disable_interrupts(ah). ath9k_hw_set_interrupts(ah, ah->imask) only gets changed to ath9k_hw_enable_interrupts(ah), whenever ah->imask was not changed since the point where interrupts were disabled. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Use common ath key management functionsBruno Randolf2010-09-161-21/+0
| | | | | | | | Use key management functions which have been moved to ath/key.c and remove ath9k copies of these functions and other now unused definitions. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: report the TID in the tx status on AR5008-AR9002Felix Fietkau2010-07-121-0/+3
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: remove duplicate WMM AC definitionsFelix Fietkau2010-06-141-8/+3
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: inform ANI calibration when scanningLuis R. Rodriguez2010-06-141-1/+1
| | | | | | | | | | | The new ANI implementation will use this to skip ANI calibration upon a scan. This cannot be ported to the older ANI implementation unless default ANI values from the ANI are also used upon a scan. This is essentially what one of the things thenew ANI does. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: add support for Tx and Rx STBCFelix Fietkau2010-04-201-1/+7
| | | | | | | Supported only for single stream rates by the hardware Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Fix sparse endian warningsSujith2010-04-161-5/+5
| | | | | | | | | | | This patch fixes a bunch of endian issues that were exposed by sparse. It's a miracle that the driver worked at all till now. The Lord be praised. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Abort rx if hw is not coming out of full sleep in resetVasanthakumar Thiagarajan2010-04-161-0/+1
| | | | | Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: add LDPC support for AR9003Luis R. Rodriguez2010-04-161-0/+2
| | | | | Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Fill descriptor abstrations for AR9003Vasanthakumar Thiagarajan2010-04-161-2/+5
| | | | | | Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: move AR9002 mac ops to its own fileLuis R. Rodriguez2010-04-161-2/+0
| | | | | | Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud