summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath10k/txrx.c
Commit message (Collapse)AuthorAgeFilesLines
* ath10k: Add tx ack signal support for management framesVenkateswara Naralasetty2018-04-191-0/+8
| | | | | | | | | | | This patch add support to get RSSI from acknowledgment frames for transmitted management frames. hardware_used: QCA4019, QCA9984. firmware version: 10.4-3.5.3-00052. Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ath10k: make ath10k report discarded packets to mac80211Ignacio Nunez Hernanz2018-02-261-5/+7
| | | | | | | | | | | | | Whenever ath10k firmware discards a packet (HTT_TX_COMPL_STATE_DISCARD flag), the skb is freed and mac80211 does not get feedback through ieee80211_tx_status(). Instead, make sure that the IEEE80211_TX_STAT_ACK flag is disabled and let the packet go through, like ath9k does. Signed-off-by: Ignacio Nunez Hernanz <nacho.nunez@aoifes.com> [kvalo@codeaurora.org: rebase patch manually] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ath10k: update copyright yearKalle Valo2017-12-271-1/+1
| | | | | | Update year for Qualcomm Atheros, Inc. copyrights. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: fix block comments styleMarcin Rokicki2017-04-051-1/+2
| | | | | | | | Fix output from checkpatch.pl like: Block comments use a trailing */ on a separate lin Signed-off-by: Marcin Rokicki <marcin.rokicki@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: fix throughput regression in multi client modeRajkumar Manoharan2016-09-091-2/+0
| | | | | | | | | | | | | | | | | | | commit 7a0adc83f34d ("ath10k: improve tx scheduling") is causing severe throughput drop in multi client mode. This issue is originally reported in veriwave setup with 50 clients with TCP downlink traffic. While increasing number of clients, the average throughput drops gradually. With 50 clients, the combined peak throughput is decreased to 98 Mbps whereas reverting given commit restored it to 550 Mbps. Processing txqs for every tx completion is causing overhead. Ideally for management frame tx completion, pending txqs processing can be avoided. The change partly reverts the commit "ath10k: improve tx scheduling". Processing pending txqs after all skbs tx completion will yeild enough room to burst tx frames. Fixes: 7a0adc83f34d ("ath10k: improve tx scheduling") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: hide kernel addresses from logs using %pK format specifierMaharaja Kennadyrajan2016-09-021-1/+1
| | | | | | | | | | | With the %pK format specifier we hide the kernel addresses with the help of kptr_restrict sysctl. In this patch, %p is changed to %pK in the driver code. The sysctl is documented in Documentation/sysctl/kernel.txt. Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: Add WARN_ON if we over-write peer-map pointer.Ben Greear2016-07-081-0/+1
| | | | | | | | Not sure this can happen, but seems like a reasonable sanity check. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: fix potential null dereference bugsBob Copeland2016-06-301-2/+3
| | | | | | | | | | | | | | | | | | | | Smatch warns about a number of cases in ath10k where a pointer is null-checked after it has already been dereferenced, in code involving ath10k private virtual interface pointers. Fix these by making the dereference happen later. Addresses the following smatch warnings: drivers/net/wireless/ath/ath10k/mac.c:3651 ath10k_mac_txq_init() warn: variable dereferenced before check 'txq' (see line 3649) drivers/net/wireless/ath/ath10k/mac.c:3664 ath10k_mac_txq_unref() warn: variable dereferenced before check 'txq' (see line 3659) drivers/net/wireless/ath/ath10k/htt_tx.c:70 __ath10k_htt_tx_txq_recalc() warn: variable dereferenced before check 'txq->sta' (see line 52) drivers/net/wireless/ath/ath10k/htt_tx.c:740 ath10k_htt_tx_get_vdev_id() warn: variable dereferenced before check 'cb->vif' (see line 736) drivers/net/wireless/ath/ath10k/txrx.c:86 ath10k_txrx_tx_unref() warn: variable dereferenced before check 'txq' (see line 84) drivers/net/wireless/ath/ath10k/wmi.c:1837 ath10k_wmi_op_gen_mgmt_tx() warn: variable dereferenced before check 'cb->vif' (see line 1825) Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: improve tx schedulingMichal Kazior2016-05-241-0/+3
| | | | | | | | | | Recent changes revolving around implementing wake_tx_queue support introduced a significant performance regressions on some (slower, uni-proc) systems. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: add some sanity checks to peer_map_event() functionsDan Carpenter2016-04-191-0/+14
| | | | | | | | | | Smatch complains that since "ev->peer_id" comes from skb->data that means we can't trust it and have to do a bounds check on it to prevent an array overflow. Fixes: 6942726f7f7b ('ath10k: add fast peer_map lookup') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()Kalle Valo2016-04-141-1/+1
| | | | | | | | | | Fixes checkpatch warnings: drivers/net/wireless/ath/ath10k/mac.c:452: Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp() drivers/net/wireless/ath/ath10k/mac.c:455: Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp() drivers/net/wireless/ath/ath10k/txrx.c:133: Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp() Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: fix checkpatch warnings related to spacesKalle Valo2016-04-141-1/+1
| | | | | | | | | | Fix checkpatch warnings about use of spaces with operators: spaces preferred around that '*' (ctx:VxV) This has been recently added to checkpatch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: speedup htt rx descriptor processing for tx completionRajkumar Manoharan2016-04-041-6/+6
| | | | | | | | | | | To optimize CPU usage htt rx descriptors will be reused instead of refilling it for htt rx copy engine (CE5). To support that all htt rx indications should be processed at same context. FIFO queue is used to maintain tx completion status for each msdu. This helps to retain the order of tx completion. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: move mgmt descriptor limit handle under mgmt_txRajkumar Manoharan2016-03-181-11/+7
| | | | | | | | | | | | | | | | | Frames that are transmitted via MGMT_TX are using reserved descriptor slots in firmware. This limitation is for the htt_mgmt_tx path itself, not for mgmt frames per se. In 16 MBSSID scenario, these reserved slots will be easy exhausted due to frequent probe responses. So for 10.4 based solutions, probe responses are limited by a threshold (24). management tx path is separate for all except tlv based solutions. Since tlv solutions (qca6174 & qca9377) do not support 16 AP interfaces, it is safe to move management descriptor limitation check under mgmt_tx function. Though CPU improvement is negligible, unlikely conditions or never hit conditions in hot path can be avoided on data transmission. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: keep track of queue depth per txqMichal Kazior2016-03-061-0/+7
| | | | | | | This will be necessary for later. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: add fast peer_map lookupMichal Kazior2016-03-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | The pull-push functionality of 10.4 will be based on peer_id and tid. These will need to be mapped, eventually, to ieee80211_txq to be used with ieee80211_tx_dequeue(). Iterating over existing stations every time peer_id needs to be mapped to a station would be inefficient wrt CPU time. The new firmware, which will be the only user of the code flow-wise, will guarantee to use low peer_ids first so despite peer_map's apparent huge size d-cache thrashing should not be a problem. Older firmware hot paths will effectively not use peer_map. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: refactor tx pending managementMichal Kazior2016-03-061-1/+1
| | | | | | | | | | | | | | | | | | | Tx pending counter logic assumed that the sk_buff is already known and hence was performed in HTT functions themselves. However, for the sake of future wake_tx_queue() usage the driver must be able to tell whether it can submit more frames to firmware before it dequeues frame from ieee80211_txq (and thus long before HTT Tx functions are called) because once a frame is dequeued it cannot be requeud back to mac80211. This prepares the driver for future changes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: fix tx header parsingMichal Kazior2015-11-231-6/+2
| | | | | | | | | | | | | | | | | | | | Frames are not guaranteed to be 802.11 frames in ath10k_htt_tx() and the tx completion handler. In some cases, like TDLS, they can be Ethernet. Hence checking, e.g. frame_control could yield bogus results and behavior. Fortunately this wasn't a real problem so far because there's no FW/HW combination to encounter this problem. However it is good to fix this in advance. Fixes: 75d85fd9993c ("ath10k: introduce basic tdls functionality") Fixes: eebc67fef3ee ("ath10k: fix pmf for wmi-tlv on qca6174") Fixes: 7b7da0a02192 ("ath10k: drop probe responses when too many are queued") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: remove is_offchanMichal Kazior2015-11-231-1/+6
| | | | | | | It was wasteful to keep it in the struct. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: use pre-allocated DMA buffer in TxPeter Oh2015-10-061-5/+0
| | | | | | | | | | ath10k driver is using dma_pool_alloc per packet and dma_pool_free in coresponding at Tx completion. Use of pre-allocated DMA buffer in Tx will improve saving CPU resource by 5% while it consumes about 56KB memory more as trade off. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: drop probe responses when too many are queuedVivek Natarajan2015-09-091-2/+12
| | | | | | | | | | | | | In a noisy environment, when multiple interfaces are created, the management tx descriptors are fully occupied by the probe responses from all the interfaces. This prevents a new station from a successful association. Fix this by limiting the probe responses when the specified threshold limit is reached. Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: Improve performance by reducing tx_lock contentionQi Zhou2015-07-291-9/+8
| | | | | | | | | | | | | | | | During tx completion, tx_lock is held for longer than required, preventing efficient refill of htt->pending_tx. Refactor the code so that only MSDU related operations are protected by the lock. Improves downstream performance on a dual-core ARM Freescale LS1024A (f.k.a. Mindspeed Comcerto 2000) AP with a 3x3 client from 495 to 580 Mbps. Other CPU bound multicore systems may also benefit. Signed-off-by: Denton Gentry <dgentry@google.com> Signed-off-by: Avery Pennarun <apenwarr@google.com> [mfaltesek@google.com: removed conflicting code for tracking msdu_ids.] Signed-off-by: Marty Faltesek <mfaltesek@google.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: txrx: remove unreachable negative return check and fixup typeNicholas Mc Guire2015-06-161-3/+3
| | | | | | | | | | | wait_event_timeout(), introduced in 'commit 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")' never returns < 0 so the only failure condition to be checked is == 0 (timeout). Further the return type is long not int - an appropriately named variable is added and the assignments fixed up. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: fix no-ack frame statusSujith Manoharan2015-04-091-2/+7
| | | | | | | | | Use the new IEEE80211_TX_STAT_NOACK_TRANSMITTED flag to indicate successful transmission of no-ack frames. This fixes multicast frame accounting. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: use idr api for msdu_idsMichal Kazior2015-01-271-2/+7
| | | | | | | | | | | | | | | HTT Tx protocol uses arbitrary host assigned ids too associate with MSDUs when delivering completions. Instead of rolling out own id generation scheme use the tools provided in kernel. This should have little to no effect on performance. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: speed up hw recoveryMichal Kazior2014-10-311-1/+2
| | | | | | | | | | | | | | | | | | In some cases hw recovery was taking an absurdly long time due to ath10k waiting for things that would never really complete. Instead of waiting for inevitable timeouts poke all completions and wakequeues and check if it's still worth waiting. Reading/writing ar->state requires conf_mutex. Since waiters might be holding it introduce a new flag CRASH_FLUSH so it's possible to tell waiters to abort whatever they were waiting for. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: add tracing for tx infoRajkumar Manoharan2014-10-071-0/+1
| | | | | | | | | The tx info such as msdu_id, frame len, vdev id and tid are reported to user space by tracepoint. This is useful for collecting tx statistics. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: use ether_addr_copy()Kalle Valo2014-09-181-1/+1
| | | | | | | | | | | | | As suggeested by checkpatch: WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2) In wmi.c I had to change due to sparse warnings copying of struct wmi_mac_addr from form &cmd->peer_macaddr.addr to cmd->peer_macaddr.addr. In ath10k_wmi_set_ap_ps_param() I also added the missing ".addr" to the copy command. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: improve logging to include dev idMichal Kazior2014-08-261-8/+9
| | | | | | | | | This makes it a lot easier to log and debug messages if there's more than 1 ath10k device on a system. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: fix Rx aggregation reorderingMichal Kazior2014-07-251-2/+1
| | | | | | | | | | | | | | | Firmware doesn't perform Rx reordering so it is left to the host driver to do that. Use mac80211 to perform reordering instead of re-inventing the wheel. This fixes TCP throughput issues in some environments. Reported-by: Denton Gentry <denton.gentry@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: move rx related functions to htt_rx.cJanusz Dziedzic2014-03-251-183/+0
| | | | | | | No functional changes. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: reduce htt tx/rx spinlock overheadMichal Kazior2014-02-281-2/+2
| | | | | | | | | | | | It is inefficient to grab irqsave spinlocks for skb lists for each queue/dequeue action. Using rx_ring.lock and tx_lock allows to use less heavy bh spinlock functions and moving locking upwards allows to toggle spinlocks less often. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: bypass htc for htt tx pathMichal Kazior2014-02-281-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Going through full htc tx path for htt tx is a waste of resources. By skipping it it's possible to easily submit scatter-gather to the pci hif for reduced host cpu load and improved performance. The new approach uses dma pool to store the following metadata for each tx request: * msdu fragment list * htc header * htt tx command The htt tx command contains a msdu prefetch. Instead of copying it original mapped msdu address is used to submit a second scatter-gather item to hif to make a complete htt tx command. The htt tx command itself hands over dma mapped pointers to msdus and completion of the command itself doesn't mean the frame has been sent and can be unmapped/freed. This is why htc tx completion is skipped for htt tx as all tx related resources are freed upon htt tx completion indication event (which also implicitly means htt tx command itself was completed). Since now each htt tx request effectively consists of 2 copy engine items CE_HTT_H2T_MSG_SRC_NENTRIES is updated to allow maximum of TARGET_10X_NUM_MSDU_DESC msdus being queued. This keeps the tx path resource management simple. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: remove DMA mapping wrappersMichal Kazior2014-02-281-4/+1
| | | | | | | | | | | There's no real benefit from using them. DMA-API already provides debugging. Some skbuffs are already mapped directly with DMA-API since wrapper arguments were insufficient and extending them would be pointless. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: set the mactime of ieee80211_rx_statusChun-Yeow Yeoh2014-02-271-0/+6
| | | | | | | | | | | Retrieve the mactime of ieee80211_rx_status based on received data frame. The value is obtained from the htt_rx_indication_ppdu structure and only available in 32-bit. kvalo: white space fixes Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: add more details to some debug messagesBen Greear2014-02-261-1/+2
| | | | | | | | Makes it easier to determine why some failures happened. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* Merge branch 'for-linville' of git://github.com/kvalo/athJohn W. Linville2014-02-241-2/+2
|\
| * ath10k: add more debugging for receive errorsBen Greear2014-02-131-2/+2
| | | | | | | | | | Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* | mac80211: move VHT related RX_FLAG to another variableEmmanuel Grumbach2014-02-061-2/+2
|/ | | | | | | | | | ieee80211_rx_status.flags is full. Define a new vht_flag variable to be able to set more VHT related flags and make room in flags. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> [ath10k] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* ath10k: handle TKIP MIC error correctlyJanusz Dziedzic2013-12-161-1/+1
| | | | | | | | | We should check MIC error flag base on rx_attention, to have consistent status of MIC failure and FCS error. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: fix Tx status clearingMichal Kazior2013-11-271-1/+1
| | | | | | | | | | | | | Too much of tx info was being cleared. This caused issues in some setups with tx frame status reporting. This should fix some cases of stations not being able to associate to ath10k AP. Reported-By: Matti Laakso <malaakso@elisanet.fi> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: clear tx status before submitting to mac80211Michal Kazior2013-11-151-0/+1
| | | | | | | | | | | | Garbage was reported in ieee80211_tx_info. This led to a WARN_ON in cfg80211_calculate_bitrate(). This also fixes some random tx bitrate values reported through `iw` command. Reported-By: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: remove htt rx amsdu clear retry bit hackKalle Valo2013-11-151-0/+3
| | | | | | | | With commit 0cfcefef1 ("mac80211: support reporting A-MSDU subframes individually") there's no need to have the hack to clear the retry bit in ath10k_htt_rx_amsdu(), mac80211 can handle this properly now. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: fix NSS reporting in RXMichal Kazior2013-10-211-1/+1
| | | | | | | | | | | NSTS values reported in the VHT-SIG-A1 are 0 through 7 but they actually describe number of streams 1 through 8. 1SS frames were dropped. This patch fixes this. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: report A-MSDU subframes individuallyMichal Kazior2013-09-261-0/+2
| | | | | | | | | | | | | | HW reports each A-MSDU subframe as a separate sk_buff. It is impossible to configure it to behave differently. Until now ath10k was reconstructing A-MSDUs from subframes which involved a lot of memory operations. This proved to be a significant contributor to degraded RX performance. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: use msdu headroom to store txfragMichal Kazior2013-09-201-10/+6
| | | | | | | | | | | | | | | Instead of allocating sk_buff for a mere 16-byte tx fragment list buffer use headroom of the original msdu sk_buff. This decreases CPU cache pressure and improves performance. Measured improvement on AP135 is 560mbps -> 590mbps of UDP TX briding traffic. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: decouple HTT TX completionsMichal Kazior2013-09-201-36/+16
| | | | | | | | | | | | | | | | Until now the all MSDU transfer related structures were freed when all resources were unreferenced. Now HTC transfer is freed independently and HTT transfer is so too. This yields a way more simpler ath10k_skb_cb and should possibly enable parallel pipe processing (which is now serialized in ath10k_pci_process_ce routine). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: avoid needless memset on TX pathMichal Kazior2013-09-201-1/+0
| | | | | | | | | This reduces number of memory accesses and hopefully contributes to better performance in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: use num_pending_tx instead of msdu id bitmapMichal Kazior2013-09-201-1/+1
| | | | | | | | | It's more efficient to simply check num_pending_tx value instead of traversing whole bitmap of msdu ids. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devicesKalle Valo2013-06-121-0/+417
Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
OpenPOWER on IntegriCloud