summaryrefslogtreecommitdiffstats
path: root/drivers/net/sfc/nic.c
Commit message (Collapse)AuthorAgeFilesLines
* sfc: Remove configurable FIFO thresholds for pause frame generationBen Hutchings2011-02-281-20/+0
| | | | | | | | | | | | | | | | In Falcon we can configure the fill levels of the RX data FIFO which trigger the generation of pause frames (if enabled), and we have module parameters for this. Siena does not allow the levels to be configured (or, if it does, this is done by the MC firmware and is not configurable by drivers). So far as I can tell, the module parameters are not used by our internal scripts and have not been documented (with the exception of the short parameter descriptions). Therefore, remove them and always initialise Falcon with the default values. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
* sfc: Update copyright datesBen Hutchings2011-02-281-1/+1
| | | | Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
* sfc: Add TX queues for high-priority trafficBen Hutchings2011-02-151-13/+38
| | | | | | | | | | | | | | | | | | | | | | Implement the ndo_setup_tc() operation with 2 traffic classes. Current Solarstorm controllers do not implement TX queue priority, but they do allow queues to be 'paced' with an enforced delay between packets. Paced and unpaced queues are scheduled in round-robin within two separate hardware bins (paced queues with a large delay may be placed into a third bin temporarily, but we won't use that). If there are queues in both bins, the TX scheduler will alternate between them. If we make high-priority queues unpaced and best-effort queues paced, and high-priority queues are mostly empty, a single high-priority queue can then instantly take 50% of the packet rate regardless of how many of the best-effort queues have descriptors outstanding. We do not actually want an enforced delay between packets on best- effort queues, so we set the pace value to a reserved value that actually results in a delay of 0. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
* Merge branch 'for-davem' of ↵David S. Miller2010-12-101-2/+40
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
| * sfc: Use TX push whenever adding descriptors to an empty queueBen Hutchings2010-12-061-2/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Whenever we add DMA descriptors to a TX ring and update the ring pointer, the TX DMA engine must first read the new DMA descriptors and then start reading packet data. However, all released Solarflare 10G controllers have a 'TX push' feature that allows us to reduce latency by writing the first new DMA descriptor along with the pointer update. This is only useful when the queue is empty. The hardware should ignore the pushed descriptor if the queue is not empty, but this check is buggy, so we must do it in software. In order to tell whether a TX queue is empty, we need to compare the previous transmission count (write_count) and completion count (read_count). However, if we do that every time we update the ring pointer then read_count may ping-pong between the caches of two CPUs running the transmission and completion paths for the queue. Therefore, we split the check for an empty queue between the completion path and the transmission path: - Add an empty_read_count field representing a point at which the completion path saw the TX queue as empty. - Add an old_write_count field for use on the completion path. - On the completion path, whenever read_count reaches or passes old_write_count the TX queue may be empty. We then read write_count, set empty_read_count if read_count == write_count, and update old_write_count. - On the transmission path, we read empty_read_count. If it's set, we compare it with the value of write_count before the current set of descriptors was added. If they match, the queue really is empty and we can use TX push. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
* | Merge branch 'master' of ↵David S. Miller2010-12-081-0/+6
|\ \ | |/ |/| | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c net/llc/af_llc.c
| * sfc: Fix crash in legacy onterrupt handler during ring reallocationBen Hutchings2010-12-071-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we are using a legacy interrupt, our IRQ may be shared and our interrupt handler may be called even though interrupts are disabled on the NIC. When we change ring sizes, we reallocate the event queue and the interrupt handler may use an invalid pointer when called for another device's interrupt. Maintain a legacy_irq_enabled flag and test that at the top of the interrupt handler. Note that this problem results from the need to work around broken INT_ISR0 reads, and does not affect the legacy interrupt handler for Falcon A1. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
* | sfc: Move Falcon global event handling to falcon.cBen Hutchings2010-12-031-43/+5
|/ | | | | Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: make functions staticstephen hemminger2010-10-211-1/+1
| | | | | | | | | Make local functions and variable static. Do some rearrangement of the string table stuff to put it where it gets used. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: return operator cleanupEric Dumazet2010-09-261-5/+5
| | | | | | | | | Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Include RX IP filter table in register dumpBen Hutchings2010-09-211-3/+2
| | | | | | | For backward compatibility, add it at the end. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Allow changing the DMA ring sizes dynamically via ethtoolBen Hutchings2010-09-101-4/+5
| | | | | | | | | | This requires some reorganisation of channel setup and teardown to ensure that we can always roll-back a failed change. Based on work by Steve Hodgson <shodgson@solarflare.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Make the dmaq size a run-time setting (rather than compile-time)Steve Hodgson2010-09-101-24/+29
| | | | | | | | | | - Allow the ring size to be specified in non power-of-two sizes (for instance to limit the amount of receive buffers). - Automatically size the event queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Refactor channel and queue lookup and iterationBen Hutchings2010-09-101-36/+49
| | | | | | | | | | | | | | | | | | In preparation for changes to the way channels and queue structures are allocated, revise the macros and functions used to look up and iterator over them. - Replace efx_for_each_tx_queue() with iteration over channels then TX queues - Replace efx_for_each_rx_queue() with iteration over channels then RX queues (with one exception, shortly to be removed) - Introduce efx_get_{channel,rx_queue,tx_queue}() functions to look up channels and queues by index - Introduce efx_channel_get_{rx,tx}_queue() functions to look up a channel's queues Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Abstract channel and index lookup for RX queuesBen Hutchings2010-09-101-14/+17
| | | | | Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Allocate DMA and event rings using GFP_KERNELBen Hutchings2010-09-101-4/+4
| | | | | | | | | | | | | Currently we allocate DMA descriptor rings and event rings using pci_alloc_consistent() which selects non-blocking behaviour from the page allocator (GFP_ATOMIC). This is unnecessary, and since we currently allocate a single contiguous block for each ring (up to 32 pages!) these allocations are likely to fail if there is any significant memory pressure. Use dma_alloc_coherent() and GFP_KERNEL instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Add support for RX flow hash controlBen Hutchings2010-06-301-10/+9
| | | | | | | | | | Allow ethtool to query the number of RX rings, the fields used in RX flow hashing and the hash indirection table. Allow ethtool to update the RX flow hash indirection table. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Implement message level controlBen Hutchings2010-06-241-95/+124
| | | | | | | | | | | | | | | Replace EFX_ERR() with netif_err(), EFX_INFO() with netif_info(), EFX_LOG() with netif_dbg() and EFX_TRACE() and EFX_REGDUMP() with netif_vdbg(). Replace EFX_ERR_RL(), EFX_INFO_RL() and EFX_LOG_RL() using explicit calls to net_ratelimit(). Implement the ethtool operations to get and set message level flags, and add a 'debug' module parameter for the initial value. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Implement ethtool register dump operationBen Hutchings2010-06-241-0/+266
| | | | | | Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Remove efx_rx_queue::add_lockSteve Hodgson2010-06-021-10/+39
| | | | | | | | | | | | | | | | | Ensure that efx_fast_push_rx_descriptors() must only run from efx_process_channel() [NAPI], or when napi_disable() has been executed. Reimplement the slow fill by sending an event to the channel, so that NAPI runs, and hanging the subsequent fast fill off the event handler. Replace the sfc_refill workqueue and delayed work items with a timer. We do not need to stop this timer in efx_flush_all() because it's safe to send the event always; receiving it will be delayed until NAPI is restarted. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Allow DRV_GEN events to be used outside of selftestsSteve Hodgson2010-06-021-7/+10
| | | | | | | | | | | Formerly, efx_test_eventq_irq() assumed it was the only user of driver generated events. Allow it to interoperate with other users. We can create more than 16 channels, so align event codes with a multiple of 256 not 16. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Workaround flush failures on Falcon B0Steve Hodgson2010-06-021-3/+0
| | | | | | | | | | | | | | | | | | | Under certain conditions a PHY may backpressure Falcon B0 in such a way that flushes timeout. In normal circumstances the phy poller would fix the PHY, and the flush could complete. But efx_nic_flush_queues() is always called after efx_stop_all(), so the poller has been stopped. Even if this weren't the case, how long would we have to wait for the poller to fix this? And several callers of efx_nic_flush_queues() are about to reset the device anyway - so we don't need to do anything. Work around this bug by scheduling a reset. Ensure that the MAC is never rewired back into the datapath before the reset runs (we already ignore all rx events anyway). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Create multiple TX queuesBen Hutchings2010-04-281-6/+6
| | | | | | | | | | | | Create a core TX queue and 2 hardware TX queues for each channel. If separate_tx_channels is set, create equal numbers of RX and TX channels instead. Rewrite the channel and queue iteration macros accordingly. Eliminate efx_channel::used_flags as redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Break NAPI processing after one ring-full of TX completionsBen Hutchings2010-04-281-15/+24
| | | | | | | | | | | Currently TX completions do not count towards the NAPI budget. This means a continuous stream of TX completions can cause the polling function to loop indefinitely with scheduling disabled. To avoid this, follow the common practice of reporting the budget spent after processing one ring-full of TX completions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Read MEM_STAT for SRM_PERR as well as MEM_PERR errorsSteve Hodgson2010-04-281-1/+2
| | | | | | | | Parity errors in different blocks of SRAM may set one of two different interrupt flags. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Extend the legacy interrupt workaroundsSteve Hodgson2010-04-281-14/+9
| | | | | | | | | | | | | | | | | Siena has two problems with legacy interrupts: 1. There is no synchronisation between the ISR read completion, and the interrupt deassert message. 2. A downstream read at the "wrong" moment can return 0, and suppress generating the next interrupt. Falcon should suffer from both of these, and it appears it does. Enable EFX_WORKAROUND_15783 on Falcon as well. Also, when we see queues == 0, ensure we always schedule or rearm every event queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Handle serious errors in exactly one interrupt handlerSteve Hodgson2010-04-281-16/+19
| | | | | | | | | | | | | 'Fatal' errors set an interrupt flag associated with a specific event queue; only read the syndrome vector if we see that queue's flag set (legacy interrupts) or in the interrupt handler for that queue (MSI). Do not ignore an interrupt if the fatal error flag is set but specific error flags are all zero. Even if we don't schedule a reset, we must respect the queue mask and rearm the appropriate event queues. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Ignore parity errors in the other port's SRAMSteve Hodgson2010-04-281-0/+2
| | | | | | | | | | Siena has a separate SRAM bank for each port. On single-port boards these can be merged together, so each port has an interrupt flag for parity errors in the other port's SRAM. Currently we do not enable such merging and should mask this interrupt source. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Fix some incorrect or redundant commentsBen Hutchings2010-02-031-4/+0
| | | | | | | | | In particular, the comment about EVQ_RPTR_REG is based on inconsistent preliminary hardware documentation, though the following code was fixed long before release. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Survive ISR0=0 bug in the shared IRQ caseGuido Barzini2010-02-031-0/+9
| | | | | Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Disable TX descriptor prefetch watchdogBen Hutchings2009-12-231-0/+2
| | | | | | | This hardware watchdog can misfire, so it does more harm than good. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Update version, copyright dates, authorsBen Hutchings2009-11-291-1/+1
| | | | | | | | This driver has been mostly rewritten since Michael Brown's initial work, so swap the order of the authors. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Add support for SFC9000 family (2)Ben Hutchings2009-11-291-14/+49
| | | | | | | | | | | | | | | | | This integrates support for the SFC9000 family of 10G Ethernet controllers and LAN-on-motherboard chips, starting with the SFL9021 'Siena' and SFC9020 'Bethpage'. Credit for this code is largely due to my colleagues at Solarflare: Guido Barzini Steve Hodgson Kieran Mansley Matthew Slattery Neil Turton Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Move shared NIC code from falcon.c to new source file nic.cBen Hutchings2009-11-291-0/+1548
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud