summaryrefslogtreecommitdiffstats
path: root/drivers/net/s2io.c
Commit message (Collapse)AuthorAgeFilesLines
* drivers/net/s2io.c: fix sparse warning: symbol shadows an earlier oneHannes Eder2009-02-171-1/+0
| | | | | | | | | | | Impact: Remove redundant inner scope variable. Fix this sparse warning: drivers/net/s2io.c:7223:21: warning: symbol 'i' shadows an earlier one drivers/net/s2io.c:7184:13: originally declared here Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io: Formatting log messageBreno Leitao2009-02-031-3/+2
| | | | | | | | | | | | | S2IO driver is printing dev->name before the name being allocated, which display eth%d instead of eth0, eth1, etc. Example: eth%d: Enabling MSIX failed eth%d: MSI-X requested but failed to enable This patch just change eth%d to s2io. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add skb_record_rx_queue() calls to multiqueue capable drivers.David S. Miller2009-01-271-0/+1
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove redundant NAPI functionsBen Hutchings2009-01-211-4/+4
| | | | | | | | | | | Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix warning fallout from recent NAPI interface changes.David S. Miller2008-12-261-2/+0
| | | | | | | | | | | When we removed the network device argument from several NAPI interfaces in 908a7a16b852ffd618a9127be8d62432182d81b4 ("net: Remove unused netdev arg from some NAPI interfaces.") several drivers now started getting unused variable warnings. This fixes those up. Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: fix sparse warnings: make symbols staticHannes Eder2008-12-251-1/+1
| | | | | | | | | | | | | | Fix this sparse warnings: drivers/net/3c523.c:350:6: warning: symbol 'alloc586' was not declared. Should it be static? drivers/net/cs89x0.c:1029:14: warning: symbol 'reset_chip' was not declared. Should it be static? drivers/net/eepro.c:1399:1: warning: symbol 'read_eeprom' was not declared. Should it be static? drivers/net/plip.c:1020:5: warning: symbol 'plip_hard_header_cache' was not declared. Should it be static? drivers/net/s2io.c:5116:6: warning: symbol 'do_s2io_store_unicast_mc' was not declared. Should it be static? drivers/net/smc9194.c:767:12: warning: symbol 'smc_findirq' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove unused netdev arg from some NAPI interfaces.Neil Horman2008-12-221-4/+4
| | | | | | | | | | When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io: fix warning in drivers/net/s2io.cIngo Molnar2008-11-251-1/+1
| | | | | | | | | | | | | | | | | this warning: drivers/net/s2io.c: In function ‘rx_intr_handler’: drivers/net/s2io.c:7369: warning: ‘lro’ may be used uninitialized in this function triggers because GCC does not recognize the (correct) error flow between: - s2io_club_tcp_session()and 'lro' Annotate it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io: convert to net_device_opsStephen Hemminger2008-11-211-21/+22
| | | | | | | Convert this driver to network device ops. Compile teseted only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdevice: safe convert to netdev_priv() #part-2Wang Chen2008-11-121-39/+39
| | | | | | | | | | | | | | | | | | We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: Kill now superfluous ->last_rx stores.David S. Miller2008-11-031-1/+0
| | | | | | | | | | | | | The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
* pci: use pci_ioremap_bar() in drivers/netArjan van de Ven2008-10-311-4/+2
| | | | | | | | | | Use the newly introduced pci_ioremap_bar() function in drivers/net. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* net: convert print_mac to %pMJohannes Berg2008-10-271-3/+1
| | | | | | | | | | | | This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: replace __FUNCTION__ with __func__Harvey Harrison2008-09-241-20/+20
| | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* s2io: Fix enabling VLAN tag stripping at driver initializationBreno Leitao2008-09-241-8/+10
| | | | | | | | | | | | | VLAN doesn't work except if you'd opened the interface in promiscuous mode before. This happens because VLAN tag stripping is not correctly marked as enabled at device startup Also, the vlan_strip_flag field was moved to the private network structure. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* s2io: reindented misleading for loopIlpo Järvinen2008-09-031-2/+2
| | | | | Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* S2io: fix statistics flush after a MTU changeBreno Leitao2008-07-291-6/+23
| | | | | | | | | | | | | | | | | On s2io driver, when you change the interface MTU, it invokes a card reset, which flush some statistics. This patch solves this problem, and also set the net_device->stats as the default statistics structure, instead of s2io_nic->stats. To do that, s2io_nic->stats turned into a staging area, where is saved statistics of the last hardware statistics query. So, the difference between the current hardware statistics and s2io_nic->stats, is the value that should be summed up, in order to get the correct statistics value, even after a reset. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* dma-mapping: add the device argument to dma_mapping_error()FUJITA Tomonori2008-07-261-21/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* net: Use queue aware tests throughout.David S. Miller2008-07-171-29/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This effectively "flips the switch" by making the core networking and multiqueue-aware drivers use the new TX multiqueue structures. Non-multiqueue drivers need no changes. The interfaces they use such as netif_stop_queue() degenerate into an operation on TX queue zero. So everything "just works" for them. Code that really wants to do "X" to all TX queues now invokes a routine that does so, such as netif_tx_wake_all_queues(), netif_tx_stop_all_queues(), etc. pktgen and netpoll required a little bit more surgery than the others. In particular the pktgen changes, whilst functional, could be largely improved. The initial check in pktgen_xmit() will sometimes check the wrong queue, which is mostly harmless. The thing to do is probably to invoke fill_packet() earlier. The bulk of the netpoll changes is to make the code operate solely on the TX queue indicated by by the SKB queue mapping. Setting of the SKB queue mapping is entirely confined inside of net/core/dev.c:dev_pick_tx(). If we end up needing any kind of special semantics (drops, for example) it will be implemented here. Finally, we now have a "real_num_tx_queues" which is where the driver indicates how many TX queues are actually active. With IGB changes from Jeff Kirsher. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Kill NETIF_F_MULTI_QUEUE.David S. Miller2008-07-171-2/+0
| | | | | | | There is no need for a feature bit for something that can be tested by simply checking the TX queue count. Signed-off-by: David S. Miller <davem@davemloft.net>
* S2io: Version update for IOMMU overflow checking and enable msi-x link ↵Sreenivasa Honnur2008-07-111-1/+1
| | | | | | | | | | interrupts patches. - Updated version number Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* S2io: Enable msi-x link interrupts.Sreenivasa Honnur2008-07-111-17/+30
| | | | | | | | | | | | | - Enable msi-x link interrupts because the timer based scheduler was getting cancelled causing the link state to be lost with repetitive card up/downs when changing the mtu. - Unmask mac_rmac_link interrupts only for Xframe I and prevent a spurious link interrupt in Xframe II. - Stop the tx queue and indicate link down when card is down Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* S2io: Fix IOMMU overflow checking.Sreenivasa Honnur2008-07-111-19/+22
| | | | | | | | | - Fix IOMMU overflow checking. As reported by Andi Kleen <ak@linux.intel.com> removed check for zero dma address. Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* net: Delete NETDEVICES_MULTIQUEUE kconfig option.David S. Miller2008-07-081-39/+8
| | | | | | Multiple TX queue support is a core networking feature. Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2008-06-281-23/+12
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl4965-base.c
| * [netdrvr] Fix IOMMU overflow checking in s2io.cAndi Kleen2008-06-271-23/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | s2io has IOMMU overflow checking, but unfortunately it is wrong. It didn't use the standard macros, which meant that it only worked on POWER and SPARC because only those define DMA_ERROR_CODE. Convert it to use the standard macros instead. I also commented two more bugs in the IOMMU handling. It assumes that 0 DMA addresses cannot happen, but that's not true in all IOMMU setups. The information if a buffer has been already mapped needs to be stored elsewhere. Didn't fix those because it needs careful checking of the buffer handling by the maintainers. Cc: ram.vepa@neterion.com Cc: santosh.rastapur@neterion.com Cc: sivakumar.subramani@neterion.com Cc: sreenivasa.honnur@neterion.com Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | Merge branch 'master' of ↵David S. Miller2008-06-131-4/+6
|\ \ | |/ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/smc911x.c
| * s2io iomem annotationsAl Viro2008-06-041-4/+6
| | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | net/s2io: set_rxd_buffer_pointer returns -ENOMEM, not ENOMEMMarcin Slusarz2008-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ramkrishna Vepa <ram.vepa@neterion.com> Cc: Rastapur Santosh <santosh.rastapur@neterion.com> Cc: Sivakumar Subramani <sivakumar.subramani@neterion.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | Merge branch 'master' of ↵David S. Miller2008-05-251-201/+293
|\ \ | |/ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/cpmac.c net/mac80211/mlme.c
| * S2io: Version update for napi and MSI-X patchesSreenivasa Honnur2008-05-221-1/+1
| | | | | | | | | | | | | | | | - Updated version number Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * S2io: Added napi support when MSIX is enabled.Sreenivasa Honnur2008-05-221-135/+192
| | | | | | | | | | | | | | | | | | - Added napi support when MSIX is enabled. - Moved test_msi function from s2io_open to probe function. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * S2io: Move all the transmit completions to a single msi-x (alarm) vectorSreenivasa Honnur2008-05-221-68/+102
| | | | | | | | | | | | | | | | | | - Move all the transmit completions to a single msi-x (alarm) vector. - Enable the continuous timer interrupt for only one transmit fifo. Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * s2io: add missing block braces to multistatement if statementIlpo Järvinen2008-05-221-1/+2
| | | | | | | | | | | | | | | | | | Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Ramkrishna Vepa <ram.vepa@neterion.com> Cc: Rastapur Santosh <santosh.rastapur@neterion.com> Cc: Sivakumar Subramani <sivakumar.subramani@neterion.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | [netdrvr] Trim trailing whitespace for several driversJeff Garzik2008-05-131-2/+2
|/ | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* S2io: Version update for multi ring patchesSreenivasa Honnur2008-04-291-1/+1
| | | | | | | | | - Updated version number. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* S2io: Enable multi ring supportSreenivasa Honnur2008-04-291-162/+173
| | | | | | | | | | | | | | | | - Seperate ring specific data - Initialize all configured rings with equal priority. - Updated boundary check for number of Rings. - Updated per ring statistics of rx_bytes and rx_packets. - Moved lro struct from struct s2io_nic to struct ring_info. - Access respective rx ring directly in fill_rx_buffers. - Moved rx_bufs_left struct s2io_nic to struct ring_info. - Added per ring variables - rxd_mode, rxd_count, dev, pdev. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* S2io: Removed rx_lock and put_lockSreenivasa Honnur2008-04-251-29/+2
| | | | | | | | | | - Removed rx_lock and put_lock as the buffer replenishment and receive completion is handled serially. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* S2io: Removed receive buffer replenishment taskletSreenivasa Honnur2008-04-251-89/+4
| | | | | | | | | | | - Removed receive buffer replenishment tasklet s2io_tasklet and instead allocating the receive buffers in either the interrupt handler (no napi) or the napi handler (napi enabled). Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* S2io: Version update for memory leak fix during free_tx_buffersSreenivasa Honnur2008-04-251-1/+1
| | | | | | | | - Updated version number. Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* S2io: Fix memory leak during free_tx_buffersSreenivasa Honnur2008-04-251-1/+1
| | | | | | | | - Fix the memory leak during free_tx_buffers. Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Merge branch 'master' of ↵David S. Miller2008-04-021-1/+1
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/s2io.c
| * S2io: Version update for Tx completion patchSreenivasa Honnur2008-03-281-1/+1
| | | | | | | | | | | | | | | | | | | | - Updated version number. - Resubmitting with correct version update. - this patch to be applied for upstream-davem branch Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Merge branch 'master' of ↵David S. Miller2008-03-271-0/+3
|\ \ | |/ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/usb/rndis_host.c drivers/net/wireless/b43/dma.c net/ipv6/ndisc.c
| * S2io: Handle TX completions on the same CPU as the sender for MIS-X interruptsSreenivasa Honnur2008-03-251-0/+3
| | | | | | | | | | | | | | - Handling TX completions on the same cpu as the sender. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | s2io annotationsAl Viro2008-03-261-8/+9
| | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | S2io: Version update for multiqueue and vlan patchesSreenivasa Honnur2008-03-171-1/+1
| | | | | | | | | | | | | | | | - Updated version number. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | S2io: Support for vlan_rx_kill_vid entry pointSreenivasa Honnur2008-03-171-48/+67
| | | | | | | | | | | | | | | | | | | | | | - Resubmit #3 - Added s2io_vlan_rx_kill_vid entry point function for unregistering vlan. - Fix to aggregate vlan packets. IP offset is incremented by 4 bytes if the packet contains vlan header. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | S2io: Multiqueue network device support - FIFO selection based on L4 portsSreenivasa Honnur2008-03-171-18/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | - Resubmit #2 - Transmit fifo selection based on TCP/UDP ports. - Added tx_steering_type loadable parameter for transmit fifo selection. 0x0 NO_STEERING: Default FIFO is selected. 0x1 TX_PRIORITY_STEERING: FIFO is selected based on skb->priority. 0x2 TX_DEFAULT_STEERING: FIFO is selected based on L4 Ports. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | S2io: Multiqueue network device support implementationSreenivasa Honnur2008-03-171-30/+176
|/ | | | | | | | | | | | | | | | | | | | | | | - Resubmit #3 Multiqueue netwrok device support implementation. - Added a loadable parameter "multiq" to enable/disable multiqueue support, by default it is disabled. - skb->queue_mapping is not used for queue/fifo selection. FIFO selection is based on skb->priority. - Added per FIFO flags FIFO_QUEUE_START and FIFO_QUEUE_STOP. Check this flag for starting and stopping netif queue and update the flags accordingly. - In tx_intr_handler added a check to ensure that we have free TXDs before wak- ing up the queue. - Added helper functions for queue manipulation(start/stop/wakeup) to invoke appropriate netif_ functions. - Calling netif_start/stop for link up/down case respectively. - As per Andi kleen's review comments, using skb->priority field for FIFO selection. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
OpenPOWER on IntegriCloud