summaryrefslogtreecommitdiffstats
path: root/drivers/net/hamradio/6pack.c
Commit message (Collapse)AuthorAgeFilesLines
* 6pack: fix free memory scribblesOne Thousand Gnomes2016-01-061-0/+6
| | | | | | | | | | | | | | | commit acf673a3187edf72068ee2f92f4dc47d66baed47 fixed a user triggerable free memory scribble but in doing so replaced it with a different one that allows the user to control the data and scribble even more. sixpack_close is called by the tty layer in tty context. The tty context is protected by sp_get() and sp_put(). However network layer activity via sp_xmit() is not protected this way. We must therefore stop the queue otherwise the user gets to dump a buffer mostly of their choice into freed kernel pages. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 6pack: Fix use after free in sixpack_close().David Miller2015-12-181-4/+4
| | | | | | | | | | Need to do the unregister_device() after all references to the driver private have been done. Also we need to use del_timer_sync() for the timers so that we don't have any asynchronous references after the unregister. Signed-off-by: David S. Miller <davem@davemloft.net>
* ax25: Stop using magic neighbour cache operations.Eric W. Biederman2015-03-031-2/+3
| | | | | | | | | | | | | | | | | | | | | | | Before the ax25 stack calls dev_queue_xmit it always calls ax25_type_trans which sets skb->protocol to ETH_P_AX25. Which means that by looking at the protocol type it is possible to detect IP packets that have not been munged by the ax25 stack in ndo_start_xmit and call a function to munge them. Rename ax25_neigh_xmit to ax25_ip_xmit and tweak the return type and value to be appropriate for an ndo_start_xmit function. Update all of the ax25 devices to test the protocol type for ETH_P_IP and return ax25_ip_xmit as the first thing they do. This preserves the existing semantics of IP packet processing, but the timing will be a little different as the IP packets now pass through the qdisc layer before reaching the ax25 ip packet processing. Remove the now unnecessary ax25 neighbour table operations. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ax25: Refactor to use private neighbour operations.Eric W. Biederman2015-03-021-0/+2
| | | | | | | | | | | | | AX25 already has it's own private arp cache operations to isolate it's abuse of dev_rebuild_header to transmit packets. Add a function ax25_neigh_construct that will allow all of the ax25 devices to force using these operations, so that the generic arp code does not need to. Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-hams@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ax25/6pack: Replace sp_header_ops with ax25_header_opsEric W. Biederman2015-03-021-27/+1
| | | | | | | | | | The two sets of header operations are functionally identical remove the duplicate definition. Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-hams@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hamradio: 6pack: remove unnecessary checkSudip Mukherjee2014-11-031-2/+1
| | | | | | | | | this is check for dev is unnecessary, as we are already checking dev after allocating it via alloc_netdev, and jumping to label: out if it is NULL. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: set name_assign_type in alloc_netdev()Tom Gundersen2014-07-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hamradio: 6pack: fix error return codeJulia Lawall2014-01-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* sections: fix section conflicts in drivers/net/hamradioAndi Kleen2012-10-061-1/+1
| | | | | | | Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sections: fix section conflicts in drivers/netAndi Kleen2012-10-061-2/+2
| | | | | | | Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Remove all #inclusions of asm/system.hDavid Howells2012-03-281-1/+0
| | | | | | | | | Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
* atomic: use <linux/atomic.h>Arun Sharma2011-07-261-1/+1
| | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 6pack,mkiss: fix lock inconsistencyArnd Bergmann2011-07-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Lockdep found a locking inconsistency in the mkiss_close function: > kernel: [ INFO: inconsistent lock state ] > kernel: 2.6.39.1 #3 > kernel: --------------------------------- > kernel: inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. > kernel: ax25ipd/2813 [HC0[0]:SC0[0]:HE1:SE1] takes: > kernel: (disc_data_lock){+++?.-}, at: [<ffffffffa018552b>] mkiss_close+0x1b/0x90 [mkiss] > kernel: {IN-SOFTIRQ-R} state was registered at: The message hints that disc_data_lock is aquired with softirqs disabled, but does not itself disable softirqs, which can in rare circumstances lead to a deadlock. The same problem is present in the 6pack driver, this patch fixes both by using write_lock_bh instead of write_lock. Reported-by: Bernard F6BVP <f6bvp@free.fr> Tested-by: Bernard F6BVP <f6bvp@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ralf Baechle<ralf@linux-mips.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "tty: make receive_buf() return the amout of bytes received"Linus Torvalds2011-06-041-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit b1c43f82c5aa265442f82dba31ce985ebb7aa71c. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41af6a: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41af6a. Milton Miller pointed out the 'unsigned int' issue. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Milton Miller <miltonm@bga.com> Cc: Stefan Bigler <stefan.bigler@keymile.com> Cc: Toby Gray <toby.gray@realvnc.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tty: make receive_buf() return the amout of bytes receivedFelipe Balbi2011-04-221-3/+5
| | | | | | | | | | | | | it makes it simpler to keep track of the amount of bytes received and simplifies how flush_to_ldisc counts the remaining bytes. It also fixes a bug of lost bytes on n_tty when flushing too many bytes via the USB serial gadget driver. Tested-by: Stefan Bigler <stefan.bigler@keymile.com> Tested-by: Toby Gray <toby.gray@realvnc.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hamradio: 6pack: semaphore cleanupThomas Gleixner2010-10-121-1/+1
| | | | | | | | | | | Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: David Miller <davem@davemloft.net> LKML-Reference: <20100907125055.269142443@linutronix.de>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* net, compat_ioctl: handle socket ioctl abuses in tty driversArnd Bergmann2009-11-061-0/+21
| | | | | | | | | | | | | | | | | | Slip and a few other drivers use the same ioctl numbers on tty devices that are normally meant for sockets. This causes problems with our compat_ioctl handling that tries to convert the data structures in a different format. Fortunately, these five drivers all use 32 bit compatible data structures in the ioctl numbers, so we can just add a trivial compat_ioctl conversion function to each of them. SIOCSIFENCAP and SIOCGIFENCAP do not need to live in fs/compat_ioctl.c after this any more, and they are not used on any sockets. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* convert hamradio drivers to netdev_txreturnt_tStephen Hemminger2009-09-011-1/+1
| | | | | Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-07-231-1/+1
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwmc3200wifi/netdev.c net/wireless/scan.c
| * Update Andreas Koensgen's email addressRalf Baechle2009-07-171-1/+1
| | | | | | | | | | | | | | The kernel has used a stale email address of Andreas for a few years. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Revert "NET: Fix locking issues in PPP, 6pack, mkiss and strip line ↵David S. Miller2009-07-141-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | disciplines." This reverts commit adeab1afb7de89555c69aab5ca21300c14af6369. As Alan Cox explained, the TTY layer changes that went recently to get rid of the tty->low_latency stuff fixes this already, and even for -stable it's the ->low_latency changes that should go in to fix this, rather than this patch. Signed-off-by: David S. Miller <davem@davemloft.net>
| * NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines.Ralf Baechle2009-07-121-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Guido Trentalancia reports: I am trying to use the kiss driver in the Linux kernel that is being shipped with Fedora 10 but unfortunately I get the following oops: mkiss: AX.25 Multikiss, Hans Albas PE1AYX mkiss: ax0: crc mode is auto. ADDRCONF(NETDEV_CHANGE): ax0: link becomes ready ------------[ cut here ]------------ WARNING: at kernel/softirq.c:77 __local_bh_disable+0x2f/0x83() (Not tainted) [...] unloaded: microcode] Pid: 0, comm: swapper Not tainted 2.6.27.25-170.2.72.fc10.i686 #1 [<c042ddfb>] warn_on_slowpath+0x65/0x8b [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c04228b4>] ? __enqueue_entity+0xe3/0xeb [<c042431e>] ? enqueue_entity+0x203/0x20b [<c0424361>] ? enqueue_task_fair+0x3b/0x3f [<c041f88c>] ? resched_task+0x3a/0x6e [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c06ab4e2>] ? _spin_lock_bh+0xb/0x16 [<c043255b>] __local_bh_disable+0x2f/0x83 [<c04325ba>] local_bh_disable+0xb/0xd [<c06ab4e2>] _spin_lock_bh+0xb/0x16 [<f8b6f600>] mkiss_receive_buf+0x2fb/0x3a6 [mkiss] [<c0572a30>] flush_to_ldisc+0xf7/0x198 [<c0572b12>] tty_flip_buffer_push+0x41/0x51 [<f89477f2>] ftdi_process_read+0x375/0x4ad [ftdi_sio] [<f8947a5a>] ftdi_read_bulk_callback+0x130/0x138 [ftdi_sio] [<c05d4bec>] usb_hcd_giveback_urb+0x63/0x93 [<c05ea290>] uhci_giveback_urb+0xe5/0x15f [<c05eaabf>] uhci_scan_schedule+0x52e/0x767 [<c05f6288>] ? psmouse_handle_byte+0xc/0xe5 [<c054df78>] ? acpi_ev_gpe_detect+0xd6/0xe1 [<c05ec5b0>] uhci_irq+0x110/0x125 [<c05d4834>] usb_hcd_irq+0x40/0xa3 [<c0465313>] handle_IRQ_event+0x2f/0x64 [<c046642b>] handle_level_irq+0x74/0xbe [<c04663b7>] ? handle_level_irq+0x0/0xbe [<c0406e6e>] do_IRQ+0xc7/0xfe [<c0405668>] common_interrupt+0x28/0x30 [<c056821a>] ? acpi_idle_enter_simple+0x162/0x19d [<c0617f52>] cpuidle_idle_call+0x60/0x92 [<c0403c61>] cpu_idle+0x101/0x134 [<c069b1ba>] rest_init+0x4e/0x50 ======================= ---[ end trace b7cc8076093467ad ]--- ------------[ cut here ]------------ WARNING: at kernel/softirq.c:136 _local_bh_enable_ip+0x3d/0xc4() [...] Pid: 0, comm: swapper Tainted: G W 2.6.27.25-170.2.72.fc10.i686 [<c042ddfb>] warn_on_slowpath+0x65/0x8b [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c04228b4>] ? __enqueue_entity+0xe3/0xeb [<c042431e>] ? enqueue_entity+0x203/0x20b [<c0424361>] ? enqueue_task_fair+0x3b/0x3f [<c041f88c>] ? resched_task+0x3a/0x6e [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c06ab4e2>] ? _spin_lock_bh+0xb/0x16 [<f8b6f642>] ? mkiss_receive_buf+0x33d/0x3a6 [mkiss] [<c04325f9>] _local_bh_enable_ip+0x3d/0xc4 [<c0432688>] local_bh_enable_ip+0x8/0xa [<c06ab54d>] _spin_unlock_bh+0x11/0x13 [<f8b6f642>] mkiss_receive_buf+0x33d/0x3a6 [mkiss] [<c0572a30>] flush_to_ldisc+0xf7/0x198 [<c0572b12>] tty_flip_buffer_push+0x41/0x51 [<f89477f2>] ftdi_process_read+0x375/0x4ad [ftdi_sio] [<f8947a5a>] ftdi_read_bulk_callback+0x130/0x138 [ftdi_sio] [<c05d4bec>] usb_hcd_giveback_urb+0x63/0x93 [<c05ea290>] uhci_giveback_urb+0xe5/0x15f [<c05eaabf>] uhci_scan_schedule+0x52e/0x767 [<c05f6288>] ? psmouse_handle_byte+0xc/0xe5 [<c054df78>] ? acpi_ev_gpe_detect+0xd6/0xe1 [<c05ec5b0>] uhci_irq+0x110/0x125 [<c05d4834>] usb_hcd_irq+0x40/0xa3 [<c0465313>] handle_IRQ_event+0x2f/0x64 [<c046642b>] handle_level_irq+0x74/0xbe [<c04663b7>] ? handle_level_irq+0x0/0xbe [<c0406e6e>] do_IRQ+0xc7/0xfe [<c0405668>] common_interrupt+0x28/0x30 [<c056821a>] ? acpi_idle_enter_simple+0x162/0x19d [<c0617f52>] cpuidle_idle_call+0x60/0x92 [<c0403c61>] cpu_idle+0x101/0x134 [<c069b1ba>] rest_init+0x4e/0x50 ======================= ---[ end trace b7cc8076093467ad ]--- mkiss: ax0: Trying crc-smack mkiss: ax0: Trying crc-flexnet The issue was, that the locking code in mkiss was assuming it was only ever being called in process or bh context. Fixed by converting the involved locking code to use irq-safe locks. Review of other networking line disciplines shows that 6pack, both sync and async PPP and STRIP have similar issues. The ppp_async one is the most interesting one as it sorts out half of the issue as far back as 2004 in commit http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commitdiff;h=2996d8deaeddd01820691a872550dc0cfba0c37d Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Guido Trentalancia <guido@trentalancia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy2009-07-051-1/+1
|/ | | | | | | | | | | This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/hamradio: fix warning: format not a string literal and no ...Hannes Eder2009-02-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | Impact: Use 'static const char[]' instead of 'static char[]' and while being at it fix an issue in 'mkiss_init_driver', where in case of an error the status code was not passed to printk. Fix this warnings: drivers/net/hamradio/6pack.c: In function 'sixpack_init_driver': drivers/net/hamradio/6pack.c:802: warning: format not a string literal and no format arguments drivers/net/hamradio/bpqether.c: In function 'bpq_init_driver': drivers/net/hamradio/bpqether.c:609: warning: format not a string literal and no format arguments drivers/net/hamradio/mkiss.c: In function 'mkiss_init_driver': drivers/net/hamradio/mkiss.c:988: warning: format not a string literal and no format arguments drivers/net/hamradio/mkiss.c:991: warning: format not a string literal and no format arguments drivers/net/hamradio/scc.c: In function 'scc_init_driver': drivers/net/hamradio/scc.c:2109: warning: format not a string literal and no format arguments drivers/net/hamradio/yam.c: In function 'yam_init_driver': drivers/net/hamradio/yam.c:1094: warning: format not a string literal and no format arguments Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* 6pack: convert to net_device_opsStephen Hemminger2009-01-211-7/+9
| | | | | Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/hamradio/6pack.c: move a dereference below a NULL testJulia Lawall2009-01-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: Kill now superfluous ->last_rx stores.David S. Miller2008-11-031-1/+0
| | | | | | | | | | | | | The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-07-201-17/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits) iucv: Fix bad merging. net_sched: Add size table for qdiscs net_sched: Add accessor function for packet length for qdiscs net_sched: Add qdisc_enqueue wrapper highmem: Export totalhigh_pages. ipv6 mcast: Omit redundant address family checks in ip6_mc_source(). net: Use standard structures for generic socket address structures. ipv6 netns: Make several "global" sysctl variables namespace aware. netns: Use net_eq() to compare net-namespaces for optimization. ipv6: remove unused macros from net/ipv6.h ipv6: remove unused parameter from ip6_ra_control tcp: fix kernel panic with listening_get_next tcp: Remove redundant checks when setting eff_sacks tcp: options clean up tcp: Fix MD5 signatures for non-linear skbs sctp: Update sctp global memory limit allocations. sctp: remove unnecessary byteshifting, calculate directly in big-endian sctp: Allow only 1 listening socket with SO_REUSEADDR sctp: Do not leak memory on multiple listen() calls sctp: Support ipv6only AF_INET6 sockets. ...
| * netdev: Add netdev->addr_list_lock protection.David S. Miller2008-07-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Add netif_addr_{lock,unlock}{,_bh}() helpers. Use them to protect operations that operate on or read the network device unicast and multicast address lists. Also use them in cases where the code simply wants to block calls into the driver's ->set_rx_mode() and ->set_multicast_list() methods. Signed-off-by: David S. Miller <davem@davemloft.net>
| * 6pack: use netstats in net_device structurePaulius Zaleckas2008-05-131-17/+7
| | | | | | | | | | | | | | | | | | Use net_device_stats from net_device structure instead of local. Kill sp_get_stats function, because by default it is used identical internal_stats function from net/core/dev.c Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | tty: Ldisc revampAlan Cox2008-07-201-1/+1
|/ | | | | | | | | | | | Move the line disciplines towards a conventional ->ops arrangement. For the moment the actual 'tty_ldisc' struct in the tty is kept as part of the tty struct but this can then be changed if it turns out that when it all settles down we want to refcount ldiscs separately to the tty. Pull the ldisc code out of /proc and put it with our ldisc code. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tty: add throttle/unthrottle helpersAlan Cox2008-04-301-3/+1
| | | | | | | | | Something Arjan suggested which allows us to clean up the code nicely Signed-off-by: Alan Cox <alan@redhat.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tty: The big operations reworkAlan Cox2008-04-301-17/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Operations are now a shared const function block as with most other Linux objects - Introduce wrappers for some optional functions to get consistent behaviour - Wrap put_char which used to be patched by the tty layer - Document which functions are needed/optional - Make put_char report success/fail - Cache the driver->ops pointer in the tty as tty->ops - Remove various surplus lock calls we no longer need - Remove proc_write method as noted by Alexey Dobriyan - Introduce some missing sanity checks where certain driver/ldisc combinations would oops as they didn't check needed methods were present [akpm@linux-foundation.org: fix fs/compat_ioctl.c build] [akpm@linux-foundation.org: fix isicom] [akpm@linux-foundation.org: fix arch/ia64/hp/sim/simserial.c build] [akpm@linux-foundation.org: fix kgdb] Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Convert asm/semaphore.h users to linux/semaphore.hMatthew Wilcox2008-04-181-1/+1
| | | | Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
* NULL noise in drivers/netAl Viro2008-01-281-1/+1
| | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TTY]: Use tty_mode_ioctl() in network drivers.Alan Cox2007-11-071-16/+10
| | | | | | | | | | We conciously make a change here - we permit mode and speed setting to be done in things like SLIP mode. There isn't actually a technical reason to disallow this. It's usually a silly thing to do but we can do it and soemone might wish to do so. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Convert files to UTF-8 and some cleanupsJan Engelhardt2007-10-191-1/+1
| | | | | | | | | | | | | | | | | | * Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* hamradio: ->hard_header() takes packet type in host-endianAl Viro2007-10-141-1/+1
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [NET]: Move hardware header operations out of netdevice.Stephen Hemminger2007-10-101-3/+10
| | | | | | | | | Since hardware header operations are part of the protocol class not the device instance, make them into a separate object and save memory. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle2007-10-101-2/+0
| | | | | | | | | | | | It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX.25]: Fix default address and broadcast address initialization.Ralf Baechle2006-12-081-7/+2
| | | | | | | | | | | | Only the callsign but not the SSID part of an AX.25 address is ASCII based but Linux by initializes the SSID which should be just a 4-bit number from ASCII anyway. Fix that and convert the code to use a shared constant for both default addresses. While at it, use the same style for null_ax25_address also. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [6PACK]: Masking bug in 6pack driver.Jean Delvare2006-11-251-1/+1
| | | | | | | | | Looks like a broken masking to me, binary not is used where bitwise not was intended. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [NET]: Add netif_tx_lockHerbert Xu2006-06-171-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] TTY layer buffering revampAlan Cox2006-01-101-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [AX.25]: Rename ax25_encapsulate to ax25_hard_headerRalf Baechle2005-09-121-1/+1
| | | | | | | | Rename ax25_encapsulate to ax25_hard_header which these days more accurately describes what the function is supposed to do. Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] Fix 6pack setting of MAC addressRalf Baechle2005-08-271-6/+0
| | | | | | | | | | | | | | Don't check type of sax25_family; dev_set_mac_address has already done that before and anyway, the type to check against would have been ARPHRD_AX25. We only got away because AF_AX25 and ARPHRD_AX25 both happen to be defined to the same value. Don't check sax25_ndigis either; it's value is insignificant for the purpose of setting the MAC address and the check has shown to break some application software for no good reason. Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] 6pack Timer initializationRalf Baechle2005-08-271-0/+3
| | | | | | | | | I dropped the timer initialization bits by accident when sending the p-persistence fix. This patch gets the driver to work again on halfduplex links. Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] 6pack persistence fixRalf Baechle DL5RB2005-08-101-16/+4
| | | | | | | | | | | Fix the p-persistence CSMA algorithm which in simplex mode was starting with a slottime delay before doing anything else as if there was carrier collision resulting in bad performance on simplex links. Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud