summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
Commit message (Collapse)AuthorAgeFilesLines
* bnx2: Correctly receive full sized 802.1ad fragmesVlad Yasevich2014-10-011-2/+3
| | | | | | | | | | | | | | This driver, similar to tg3, has a check that will cause full sized 802.1ad frames to be dropped. The frame will be larger then the standard mtu due to the presense of vlan header that has not been stripped. The driver should not drop this frame and should process it just like it does for 802.1q. CC: Sony Chacko <sony.chacko@qlogic.com> CC: Dept-HSGLinuxNICDev@qlogic.com Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Allow for recieve of full-size 8021AD framesVlad Yasevich2014-10-011-1/+2
| | | | | | | | | | | | | | | | | | When receiving a vlan-tagged frame that still contains a vlan header, the length of the packet will be greater then MTU+ETH_HLEN since it will account of the extra vlan header. TG3 checks this for the case for 802.1Q, but not for 802.1ad. As a result, full sized 802.1ad frames get dropped by the card. Add a check for 802.1ad protocol when receving full sized frames. Suggested-by: Prashant Sreedharan <prashant@broadcom.com> CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: Fix bug in Tx completion path.Manish Chopra2014-09-301-2/+2
| | | | | | | | | o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Due to this interface down path gets stuck forever waiting for NAPI to complete. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: Fix BUG "sleeping function called from invalid context"Manish Chopra2014-09-302-2/+2
| | | | | | | | | | o __netxen_nic_down() function might sleep while holding spinlock_t(tx_clean_lock). Acquire this lock for only releasing TX buffers instead of taking it for whole down path. Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: fix stmmac_pci_probe failed when CONFIG_HAVE_CLK is selectedKweh, Hock Leong2014-09-291-2/+9
| | | | | | | | | | | | | | | | | | | | When the CONFIG_HAVE_CLK is selected for the system, the stmmac_pci_probe will fail with dmesg: [ 2.167225] stmmaceth 0000:00:14.6: enabling device (0000 -> 0002) [ 2.178267] stmmaceth 0000:00:14.6: enabling bus mastering [ 2.178436] stmmaceth 0000:00:14.6: irq 24 for MSI/MSI-X [ 2.178703] stmmaceth 0000:00:14.6: stmmac_dvr_probe: warning: cannot get CSR clock [ 2.186503] stmmac_pci_probe: main driver probe failed [ 2.194003] stmmaceth 0000:00:14.6: disabling bus mastering [ 2.196473] stmmaceth: probe of 0000:00:14.6 failed with error -2 This patch fix the issue by breaking the dependency to devm_clk_get() as the CSR clock can be obtained at priv->plat->clk_csr from pci driver. Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Allow not to specify probe_vf in SRIOV IB modeMatan Barak2014-09-261-2/+2
| | | | | | | | | | | | | | | | | | | When the HCA is configured in SRIOV IB mode (that is, at least one of the ports is IB) and the probe_vf module param isn't specified, mlx4_init_one() failed because of the following condition: if (ib_ports && (num_vfs_argc > 1 || probe_vfs_argc > 1)) { ..... } The root cause for that is a mistake in the initialization of num_vfs_argc and probe_vfs_argc. When num_vfs / probe_vf aren't given, their argument count counterpart should be 0, fix that. Fixes: dd41cc3bb90e ('net/mlx4: Adapt num_vfs/probed_vf params for single port VF') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net/macb: add pinctrl consumer support"Soren Brinkmann2014-09-261-11/+0
| | | | | | | | | | This reverts commit 8ef29f8aae524bd51298fb10ac6a5ce6c4c5a3d8. The driver core already calls pinctrl_get() and claims the default state. There is no need to replicate this in the driver. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: Fix ordering of stats in stats buffer.Manish Chopra2014-09-261-0/+2
| | | | | | | | | | | | | o When TX queues are not allocated, driver does not fill TX queues stats in the buffer. However, it is also not advancing data pointer by TX queue stats length, which would misplace all successive stats data in the buffer and will result in mismatch between stats strings and it's values. o Fix this by advancing data pointer by TX queue stats length when queues are not allocated. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: Remove __QLCNIC_DEV_UP bit check to read TX queues statistics.Manish Chopra2014-09-261-1/+1
| | | | | | | | o TX queues stats must be read when queues are allocated regardless of interface is up or not. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: Fix memory corruption while reading stats using ethtool.Manish Chopra2014-09-261-4/+2
| | | | | | | | | | | o Driver is doing memset with zero for total number of stats bytes when it has already filled some data in the stats buffer, which can overwrite memory area beyond the length of stats buffer. o Fix this by initializing stats buffer with zero before filling any data in it. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: Use qlcnic_83xx_flash_read32() API instead of lockless version of ↵Sony Chacko2014-09-261-3/+2
| | | | | | | | | | | | the API. In qlcnic_83xx_setup_idc_parameters() routine use qlcnic_83xx_flash_read32() API which takes flash lock internally instead of the lockless version qlcnic_83xx_lockless_flash_read32(). Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'rdma-for-linus' of ↵Linus Torvalds2014-09-232-15/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: "Last late set of InfiniBand/RDMA fixes for 3.17: - fixes for the new memory region re-registration support - iSER initiator error path fixes - grab bag of small fixes for the qib and ocrdma hardware drivers - larger set of fixes for mlx4, especially in RoCE mode" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits) IB/mlx4: Fix VF mac handling in RoCE IB/mlx4: Do not allow APM under RoCE IB/mlx4: Don't update QP1 in native mode IB/mlx4: Avoid accessing netdevice when building RoCE qp1 header mlx4: Fix mlx4 reg/unreg mac to work properly with 0-mac addresses IB/core: When marshaling uverbs path, clear unused fields IB/mlx4: Avoid executing gid task when device is being removed IB/mlx4: Fix lockdep splat for the iboe lock IB/mlx4: Get upper dev addresses as RoCE GIDs when port comes up IB/mlx4: Reorder steps in RoCE GID table initialization IB/mlx4: Don't duplicate the default RoCE GID IB/mlx4: Avoid null pointer dereference in mlx4_ib_scan_netdevs() IB/iser: Bump version to 1.4.1 IB/iser: Allow bind only when connection state is UP IB/iser: Fix RX/TX CQ resource leak on error flow RDMA/ocrdma: Use right macro in query AH RDMA/ocrdma: Resolve L2 address when creating user AH mlx4: Correct error flows in rereg_mr IB/qib: Correct reference counting in debugfs qp_stats IPoIB: Remove unnecessary port query ...
| * mlx4: Fix mlx4 reg/unreg mac to work properly with 0-mac addressesJack Morgenstein2014-09-221-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a chance that the VF mlx4 RoCE driver (mlx4_ib) may see a 0-mac as the current default MAC address when a RoCE interface first comes up. In this case, the RoCE driver registers the 0-mac to get its MAC index -- used in the INIT2RTR transition when it creates its proxy Q1 qp's. If we do not allow QP1 to be created, the RoCE driver will not come up. If we do not register the 0-mac, but simply use a random mac-index, QP1 will attempt to send packets with an someone's else source MAC which will get the system into more troubled. Since a 0-mac was previously used to indicate a free slot, this leads to errors, both when the 0-mac is registered and when it is unregistered. The required fix is to check in addition that the slot containing the 0-mac has a reference count of zero. Additionally, when comparing MAC addresses, need to mask out the 2 MSBs of the u64 mac on both sides of the comparison. Note that when the EN driver (mlx4_en) comes up, it set itself a proper mac --> the RoCE driver gets to be notified on that and further handing is done with the update qp command, as was added by commit 9433c188915c ("IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes"). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| * mlx4: Correct error flows in rereg_mrMatan Barak2014-09-221-11/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses feedback from Sagi Grimberg on the rereg_mr implementation of mlx4. The following are fixed: 1. Set the correct pd_flags 2. Make sure we change the iova and size MR fields only after successful write and allocation of the MTTs. 3. Make the error checking more robust Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dmaFlorian Fainelli2014-09-221-53/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should not be manipulaging the DMA_CTRL registers directly by writing 0 to them to disable DMA. This is an operation that needs to be timed to make sure the DMA engines have been properly stopped since their state machine stops on a packet boundary, not immediately. Make sure that tha bcmgenet_fini_dma() calls bcmgenet_dma_teardown() to ensure a proper DMA engine state. As a result, we need to reorder the function bodies to resolve the use dependency. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: fix TX reclaim accounting for fragmentsFlorian Fainelli2014-09-221-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GENET driver supports SKB fragments, and succeeds in transmitting them properly, but when reclaiming these transmitted fragments, we will only update the count of free buffer descriptors by 1, even for SKBs with fragments. This leads to the networking stack thinking it has more room than the hardware has when pushing new SKBs, and backing off consequently because we return NETDEV_TX_BUSY. Fix this by accounting for the SKB nr_frags plus one (itself) and update ring->free_bds accordingly with that value for each iteration loop in __bcmgenet_tx_reclaim(). Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt()Tobias Klauser2014-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In one error condition dm9000_parse_dt() returns NULL, however the return value is checked using IS_ERR() in dm9000_probe(), leading to the error not being properly propagated if CONFIG_OF is not enabled or the device tree data is not available. Fix this by also returning an ERR_PTR() in this case. Fixes: 0b8bf1baabe5 (net: dm9000: Allow instantiation using device tree) Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: fix an if conditionDan Carpenter2014-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | There is an extra semi-colon so __rtl8169_set_features() is called every time. Fixes: 929a031dfd62 ('r8169: adjust __rtl8169_set_features') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hayes Wang <hayeswang@realtek.com>-- Signed-off-by: David S. Miller <davem@davemloft.net>
* | tg3: Work around HW/FW limitations with vlan encapsulated framesVlad Yasevich2014-09-221-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | TG3 appears to have an issue performing TSO and checksum offloading correclty when the frame has been vlan encapsulated (non-accelrated). In these cases, tcp checksum is not correctly updated. This patch attempts to work around this issue. After the patch, 802.1ad vlans start working correctly over tg3 devices. CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | pch_gbe: 'select' NET_PTP_CLASSIFY.David S. Miller2014-09-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following randconfig build failure: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c: In function > ‘pch_ptp_match’: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c:130:2: error: > implicit declaration of function ‘ptp_classify_raw’ > [-Werror=implicit-function-declaration] > if (ptp_classify_raw(skb) == PTP_CLASS_NONE) > ^ > cc1: some warnings being treated as errors > make[5]: *** [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.o] Error 1 Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 3c59x: Fix bad offset spec in skb_frag_dma_mapNeil Horman2014-09-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently aded the use of skb_frag_dma_map to 3c59x, but didn't realize it automatically included the frag_offset internally, as well as provided an option to specify an extra offset in the parameter list. We need to specify an offset of 0 in the parameter list to avoid skb corruption that results in lost connections. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Linux Kernel list <linux-kernel@vger.kernel.org> CC: "David S. Miller" <davem@davemloft.net> CC: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee>
* | 3c59x: Add dma error checking and recoveryNeil Horman2014-09-191-9/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Noted that 3c59x has no checks on transmit for failed DMA mappings, and no ability to unmap fragments when a single map fails in the middle of a transmit. This patch provides error checking to ensure that dma mappings work properly, and unrolls an skb mapping if a fragmented skb transmission has a mapping failure to prevent leaks. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Linux Kernel list <linux-kernel@vger.kernel.org> CC: "David S. Miller" <davem@davemloft.net> CC: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee>
* | sfc: fix addr_list_lock spinlock use before initEdward Cree2014-09-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported by Nikolay Aleksandrov. In efx_init_port() we call efx_mac_reconfigure() to work around a Falcon/A1 limitation, and this calls efx_{arch}_filter_sync_rx_mode(), which takes the addr_list_lock; but this lock is uninitialised, because we haven't called register_netdevice() yet. So, in efx_farch_filter_sync_rx_mode(), check efx_dev_registered() before doing anything else. The EF10 equivalent, efx_ef10_filter_sync_rx_mode(), already has the corresponding check. Signed-off-by: Edward Cree <ecree@solarflare.com> Tested-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: adjust __rtl8169_set_featureshayeswang2014-09-161-40/+34
| | | | | | | | | | | | | | | | | | | | | | | | Remove the "changed" test in __rtl8169_set_features(). Instead, do simple test in rtl8169_set_features(). Set the RxChkSum and RxVlan through __rtl8169_set_features() in rtl_open(). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: Don't allocate adapter structure for all PF'sHariprasad Shenai2014-09-151-22/+27
| | | | | | | | | | | | | | | | | | | | | | | | commit 35b1de557970 ("rdma/cxgb4: Fixes cxgb4 probe failure in VM when PF is exposed through PCI Passthrough") moved the code to check for SR-IOV PF[0..3] much further down in init_one() past the point where we allocate a (struct adapter) for PF[0..3]. As a result, we left four of these on ever module remove. Fix: Allocate adapter structure only for PF4 Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: fix setting rx vlanhayeswang2014-09-131-1/+1
| | | | | | | | | | | | | | The setting should depend on the new features not the current one. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: fix the default setting of rx vlanhayeswang2014-09-131-1/+6
| | | | | | | | | | | | | | | | | | If the parameter "features" of __rtl8169_set_features() is equal to dev->features, the variable "changed" is alwayes 0, and nothing would be changed. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: cpsw: dual_emac: in suspend/resume bring down/up all the netdevMugunthan V N2014-09-131-5/+24
| | | | | | | | | | | | | | | | | | | | During suspend and resume in Dual EMAC, second port is not working as in suspend/resume only the first slave netdev is closed and opened. So bring down and up all the interfaces that are up during suspend/resume. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: b44: Fix typo in returning multicast statsMark Einon2014-09-121-1/+1
| | | | | | | | | | | | | | | | | | nstat->multicast refers to received packets, not transmitted as is returned here. Change it so that received packet stats are given. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: arc_emac: prevent reuse of unreclaimed tx descriptorsBeniamino Galvani2014-09-121-11/+32
| | | | | | | | | | | | | | | | | | This patch changes the logic in tx path to ensure that tx descriptors are reused for transmission only after they have been reclaimed by arc_emac_tx_clean(). Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: arc_emac: enable tx interruptsBeniamino Galvani2014-09-121-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the current implementation the cleaning of tx ring is done by the NAPI poll handler, which is scheduled after rx interrupts. Thus, in absence of received packets the reclaim of used tx buffers is never executed, blocking further transmission. This can be easily reproduced starting the transmission of a UDP flow with iperf, which blocks almost immediately because skbs are not returned to the stack and the socket send buffer becomes full. The patch enables tx interrupts so that the tx reclaim is scheduled after completed transmissions. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4: Set vlan stripping policy by the right commandMatan Barak2014-09-102-4/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | Changing the vlan stripping policy of the QP isn't supported by older firmware versions for the INIT2RTR command. Nevertheless, we've used it. Fix that by doing this policy change using INIT2RTR only if the firmware supports it, otherwise, we call UPDATE_QP command to do the task. Fixes: 7677fc9 ('net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4: Avoid dealing with MAC index in UPDATE_QP wrapper if not neededMatan Barak2014-09-101-7/+11
| | | | | | | | | | | | | | | | | | | | | | The current wrapper implementation of the UPDATE_QP command tries to get the MAC index, even if MAC wasn't set by the VF. Fix it up to only handle the MAC field if it's valid. Fixes: ce8d9e0 ('net/mlx4_core: Add UPDATE_QP SRIOV wrapper support') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4: Use the correct VSD mask in UPDATE_QPMatan Barak2014-09-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | When doing VGT->VST->VGT state changes, we used an incorrect mask for the vlan-stripping-disable (VSD) flag, hence the vlan related policy for user-space Raw Ethernet QPs open by VFs wasn't really applied. Fix that, by using the correct mask. Fixes: f0f829b ('net/mlx4_core: Add immediate activate for VGT->VST->VGT') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4: Correctly configure single ported VFs from the hostMatan Barak2014-09-101-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Single port VFs are seen PCI wise on both ports of the PF (we don't have single port PFs with ConnectX). With this in mind, it's possible for virtualization tools to try and configure a single ported VF through the "wrong" PF port. To handle that, we use the PF driver mapping of single port VFs to NIC ports and adjust the port value before calling into the low level code that does the actual VF configuration Fixes: 449fc48 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: cpsw: dual_emac: fix reducing of rx descriptor during ifdownMugunthan V N2014-09-101-0/+23
| | | | | | | | | | | | | | | | | | In Dual EMAC, when both interface are up and while doing ifdown with heavy traffic then skbs already processed by DMA from that slave emac has to be requeued as still the other interface is up and running. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: check harder for out of memory conditionsFlorian Fainelli2014-09-081-14/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a potential case where we might be failing to refill a control block, leaving it with both a NULL skb pointer *and* a NULL dma_unmap_addr. The way we process incoming packets, by first calling dma_unmap_single(), and then only checking for a potential NULL skb can lead to situations where do pass a NULL dma_unmap_addr() to dma_unmap_single(), resulting in an oops. Fix this my moving the NULL skb check earlier, since no backing skb also means no corresponding DMA mapping for this packet. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: systemport: check harder for out of memory conditionsFlorian Fainelli2014-09-081-12/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a potential case where we might be failing to refill a control block, leaving it with both a NULL skb pointer *and* a NULL dma_unmap_addr. The way we process incoming packets, by first calling dma_unmap_single(), and then only checking for a potential NULL skb can lead to situations where do pass a NULL dma_unmap_addr() to dma_unmap_single(), resulting in an oops. Fix this my moving the NULL skb check earlier, since no backing skb also means no corresponding DMA mapping for this packet. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_en: do not ignore autoneg in mlx4_en_set_pauseparam()Ivan Vecera2014-09-081-0/+3
| | | | | | | | | | | | | | | | | | The driver does not support pause autonegotiation so it should return -EINVAL when the function is called with non-zero autoneg. Cc: Amir Vadai <amirv@mellanox.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: ethernet: octeon_mgmt: fix a compiler warningAaro Koskinen2014-09-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following compiler warning: drivers/net/ethernet/octeon/octeon_mgmt.c: In function 'octeon_mgmt_clean_tx_buffers': drivers/net/ethernet/octeon/octeon_mgmt.c:295:4: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] u64 ns = cvmx_read_csr(CVMX_MIXX_TSTAMP(p->port)); ^ Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sunvnet - add missing rmb() for sunvnet driverDavid L Stevens2014-09-081-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sunvnet driver does not have an rmb() in the ring consumer corresponding to the wmb() in the producer. According to Documentation/memory-barriers.txt: "When dealing with CPU-CPU interactions, certain types of memory barrier should always be paired. A lack of appropriate pairing is almost certainly an error." In cases where an rmb() is not a no-op and a consumer is removing data from the ring while a producer is adding new entries, a load reorder would allow CPU1 CPU2 ---- ---- LOAD desc.size [e.g] STORE desc.size <wmb> set desc.hdr.state = VIO_DESC_READY LOAD desc.hdr.state [because VIO_DESC_READY, use old desc.size, already loaded out of order] [CPU2 has reordered apparently unrelated LOADs] To ensure other desc fields are not loaded before checking VIO_DESC_READY, we need an rmb() between the check and desc data accesses. I've also moved the viodbg() call to after the rmb() so that it, too, has current descriptor data even with reordering, which has the side effect that it won't print anything for descriptors that are not VIO_DESC_READY as before. That's a) probably a good thing, since the fields are not necessarily set and, b) better than adding another rmb() just for viodbg(). This would not be possible if strict-ordering is enforced, but then the memory barriers should be no-ops in that case. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Enable interrupts for all management countersLendacky, Thomas2014-09-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | As the management counters reach a threshold they will generate an interrupt so the value can be saved and the counter reset. The current code does not enable this interrupt on all counters. This can result in inaccurate statistics. Update the code to enable all the counters to generate an interrupt when its threshold is exceeded. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Treat certain counter registers as 64 bitLendacky, Thomas2014-09-051-82/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even if the management counters are configured to be 32 bit register values, the [rt]xoctetcount_gb and [rt]xoctetcount_g counters are always 64 bit counter registers. Since they are not being treated as 64 bit values, these statistics are being reported incorrectly (ifconfig, ethtool, etc.). Update the routines used to read the registers to access the "hi" register (an offset of 4 from the "lo" register) to create a 64 bit value for these 64 bit counters. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | greth: moved TX ring cleaning to NAPI rx poll funcDaniel Hellstrom2014-09-052-39/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does not affect the 10/100 GRETH MAC. Before all GBit GRETH TX descriptor ring cleaning was done in start_xmit(), when descriptor list became full it activated TX interrupt to start the NAPI rx poll function to do TX ring cleaning. With this patch the TX descriptor ring is always cleaned from the NAPI rx poll function, triggered via TX or RX interrupt. Otherwise we could end up in TX frames being sent but not reported to the stack being sent. On the 10/100 GRETH this is not an issue since the SKB is copied&aligned into private buffers so that the SKB can be freed directly on start_xmit() Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cnic : Cleanup CONFIG_IPV6 & VLAN checkAnish Bhatt2014-09-052-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | The cnic module needs to ensure that if ipv6 support is compiled as a module, then the cnic module cannot be compiled as built-in as it depends on ipv6. Made this check cleaner via Kconfig Use simpler IS_ENABLED for CONFIG_VLAN_8021Q check Signed-off-by: Anish Bhatt <anish@chelsio.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Fix link problems for 1G SFP RJ45 moduleYaniv Rosner2014-09-053-36/+50
| | | | | | | | | | | | | | | | | | | | When 1G SFP RJ45 module is detected, driver must reset the Tx laser in order to prevent link issues. As part of change, the link_attr_sync was relocated from vars to params. Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 3c59x: avoid panic in boomerang_start_xmit when finding page address:Neil Horman2014-09-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bug was reported on a very old kernel (RHEL6, 2.6.32-491.el6): BUG: unable to handle kernel paging request at 00800000 IP: [<c04107b5>] nommu_map_page+0x15/0x110 *pdpt = 000000003454f001 *pde = 000000003f03d067 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/online Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs p4_clockmod ipv6 ppdev parport_pc parport microcode iTCO_wdt iTCO_vendor_support 3c59x mii dcdbas serio_raw snd_intel8x0 snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 sg lpc_ich mfd_core ext4 jbd2 mbcache sr_mod cdrom sd_mod crc_t10dif pata_acpi ata_generic ata_piix radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mperf] Pid: 4219, comm: nfsd Not tainted 2.6.32-491.el6.i686 #1 Dell Computer Corporation OptiPlex GX240 /OptiPlex GX240 EIP: 0060:[<c04107b5>] EFLAGS: 00010246 CPU: 0 EIP is at nommu_map_page+0x15/0x110 EAX: 00000000 EBX: c0a83480 ECX: 00000000 EDX: 00800000 ESI: 00000000 EDI: f70e7860 EBP: e2d09b54 ESP: e2d09b24 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process nfsd (pid: 4219, ti=e2d08000 task=e2ceaaa0 task.ti=e2d08000) Stack: 00000056 00000000 0000000e c65efd38 00000020 00000296 00000206 00000206 <0> c050c850 c0a83480 e2cef154 00000001 e2d09ba8 f8fcd585 00000510 00000001 <0> 00000000 00000000 f5172200 f8fdac00 0039ef8c f5277020 f70e7860 00000510 Call Trace: [<c050c850>] ? page_address+0xd0/0xe0 [<f8fcd585>] ? boomerang_start_xmit+0x3b5/0x520 [3c59x] [<c07b2975>] ? dev_hard_start_xmit+0xe5/0x400 [<f9182b00>] ? ip6_output_finish+0x0/0xf0 [ipv6] [<c07ca053>] ? sch_direct_xmit+0x113/0x180 [<c07d5588>] ? nf_hook_slow+0x68/0x120 [<c07b2ea5>] ? dev_queue_xmit+0x1b5/0x290 [<f9182b6d>] ? ip6_output_finish+0x6d/0xf0 [ipv6] [<f9184cb8>] ? ip6_xmit+0x3e8/0x490 [ipv6] [<f91ab9f9>] ? inet6_csk_xmit+0x289/0x2f0 [ipv6] [<c07f6451>] ? tcp_transmit_skb+0x431/0x7f0 [<c07a403f>] ? __alloc_skb+0x4f/0x140 [<c07f85a2>] ? tcp_write_xmit+0x1c2/0xa50 [<c07f90b1>] ? __tcp_push_pending_frames+0x31/0xe0 [<c07ea47a>] ? tcp_sendpage+0x44a/0x4b0 [<c07ea030>] ? tcp_sendpage+0x0/0x4b0 [<c079be1e>] ? kernel_sendpage+0x4e/0x90 [<f8457bb9>] ? svc_send_common+0xc9/0x120 [sunrpc] [<f8457c85>] ? svc_sendto+0x75/0x1f0 [sunrpc] [<c060d0d9>] ? _atomic_dec_and_lock+0x59/0x90 [<f87d55d0>] ? nfs3svc_encode_readres+0x0/0xc0 [nfsd] [<f845876d>] ? svc_authorise+0x2d/0x40 [sunrpc] [<f87d4410>] ? nfs3svc_release_fhandle+0x0/0x10 [nfsd] [<f8455721>] ? svc_process_common+0xf1/0x5a0 [sunrpc] [<f8457e86>] ? svc_tcp_sendto+0x36/0xa0 [sunrpc] [<f8461778>] ? svc_send+0x98/0xd0 [sunrpc] [<f87c698c>] ? nfsd+0xac/0x140 [nfsd] [<c04470e0>] ? complete+0x40/0x60 [<f87c68e0>] ? nfsd+0x0/0x140 [nfsd] [<c04802ac>] ? kthread+0x7c/0xa0 [<c0480230>] ? kthread+0x0/0xa0 [<c0409f9f>] ? kernel_thread_helper+0x7/0x10 Code: 8d b6 00 00 00 00 eb f8 8d b4 26 00 00 00 00 8d bc 27 00 00 00 00 55 89 e5 83 ec 30 89 75 f8 31 f6 89 7d fc 89 c7 89 c8 89 5d f4 <8b> 1a 8b 4d 08 c1 eb 19 c1 e3 04 8b 9b c0 29 c7 c0 83 e3 fc 29 But the problem seems to still exist upstream. It seems on 32 bit kernels page_address() can reutrn a NULL value in some circumstances, and the pci_map_single api isn't prepared to handle that (on this system it results in a bogus pointer deference in nommu_map_page. The fix is pretty easy, if we convert the 3c59x driver to use the more convieient skb_frag_dma_map api we don't need to find the virtual address of the page at all, and page gets mapped to the hardware properly. Verified to fix the problem as described by the reporter. Applies to the net tree Change Notes: v2) Converted PCI_DMA_TODEVICE to DMA_TO_DEVICE. Thanks Dave! v3) Actually Run git commit after making changes to v2 :) Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: klassert@mathematik.tu-chemnitz.de CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Fix initialization of the wrong spin lockLendacky, Thomas2014-09-021-1/+1
| | | | | | | | | | | | | | | | | | During allocation and initialization of the network driver structures, the wrong pointer is used to initialize a spin lock. Fix the spin lock initialization by using the proper pointer. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Configure device endianity on driver load and reset endianity on removal.Manish Chopra2014-09-021-18/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some hosts can be both little and big endian. In certain scenarios a big endian kernel can kexec a little endian kernel. This patch fixes this case from both ends: 1) Return endianity to original values on shutdown (in case little endian kernel boots after we shutdown). 2) Do not rely on HW reset values when loading driver in little endian kernel but configure them explicitly (in case previous kernel was big endian and did not reset the HW). Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: calxedaxgmac: fix driver dependenciesBartlomiej Zolnierkiewicz2014-09-021-0/+1
| | | | | | | | | | | | | | | | | | | | Calxeda 1G/10G XGMAC Ethernet support should be available only on Calxeda ECX-1000/2000 (Highbank/Midway) platforms. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud