summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ti
Commit message (Collapse)AuthorAgeFilesLines
...
* | net: ethernet: ti: cpsw: move skb timestamp to packet_submitIvan Khoronzhuk2017-06-291-2/+1
| | | | | | | | | | | | | | Move sw timestamp function close to channel submit function. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: Make phy_ethtool_ksettings_get return voidyuval.shaia@oracle.com2017-06-132-9/+7
| | | | | | | | | | | | | | | | Make return value void since function never return meaningfull value Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpdma: do not enable host error misc irqGrygorii Strashko2017-06-101-4/+1
| | | | | | | | | | | | | | | | CPSW driver does not handle this interrupt, so there are no reasons to enable it in hardware. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: enable HWTSTAMP_FILTER_PTP_V1_L4_EVENT filterGrygorii Strashko2017-06-101-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPSW driver supports PTP v1 messages, but for unknown reasons this filter is not advertised. As result, ./tools/testing/selftests/networking/timestamping/timestamping utility can't be used for testing of CPSW RX timestamping with option SOF_TIMESTAMPING_RX_HARDWARE, because it uses HWTSTAMP_FILTER_PTP_V1_L4_SYNC filter. Hence, fix it by advertising HWTSTAMP_FILTER_PTP_V1_L4_XXX filters in CPSW driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: propagate tc filter chain index down the ndo_setup_tc callJiri Pirko2017-06-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | We need to push the chain index down to the drivers, so they have the information to which chain the rule belongs. For now, no driver supports multichain offload, so only chain 0 is supported. This is needed to prevent chain squashes during offload for now. Later this will be used to implement multichain offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: update drivers to handle HWTSTAMP_FILTER_NTP_ALLMiroslav Lichvar2017-05-211-0/+1
|/ | | | | | | | | | | | Include HWTSTAMP_FILTER_NTP_ALL in net_hwtstamp_validate() as a valid filter and update drivers which can timestamp all packets, or which explicitly list unsupported filters instead of using a default case, to handle the filter. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: netcp: fix check of requested timestamping filterMiroslav Lichvar2017-05-151-1/+0
| | | | | | | | | | | | The driver doesn't support timestamping of all received packets and should return error when trying to enable the HWTSTAMP_FILTER_ALL filter. Cc: WingMan Kwok <w-kwok2@ti.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: netcp_core: return error while dma channel open issueIvan Khoronzhuk2017-05-111-2/+4
| | | | | | | | Fix error path while dma open channel issue. Also, no need to check output on NULL if it's never returned. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow controlGrygorii Strashko2017-05-081-0/+16
| | | | | | | | | | | | | | | | | | When users set flow control using ethtool the bits are set properly in the CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size reset value. When receive flow control is enabled on a port, the port's associated FIFO block allocation must be adjusted. The port RX allocation must increase to accommodate the flow control runout. The TRM recommends numbers of 5 or 6. Hence, apply required Port FIFO configuration to Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during interface initialization. Cc: Schuyler Patton <spatton@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2017-05-022-10/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Millar: "Here are some highlights from the 2065 networking commits that happened this development cycle: 1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri) 2) Add a generic XDP driver, so that anyone can test XDP even if they lack a networking device whose driver has explicit XDP support (me). 3) Sparc64 now has an eBPF JIT too (me) 4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei Starovoitov) 5) Make netfitler network namespace teardown less expensive (Florian Westphal) 6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana) 7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger) 8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky) 9) Multiqueue support in stmmac driver (Joao Pinto) 10) Remove TCP timewait recycling, it never really could possibly work well in the real world and timestamp randomization really zaps any hint of usability this feature had (Soheil Hassas Yeganeh) 11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay Aleksandrov) 12) Add socket busy poll support to epoll (Sridhar Samudrala) 13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso, and several others) 14) IPSEC hw offload infrastructure (Steffen Klassert)" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits) tipc: refactor function tipc_sk_recv_stream() tipc: refactor function tipc_sk_recvmsg() net: thunderx: Optimize page recycling for XDP net: thunderx: Support for XDP header adjustment net: thunderx: Add support for XDP_TX net: thunderx: Add support for XDP_DROP net: thunderx: Add basic XDP support net: thunderx: Cleanup receive buffer allocation net: thunderx: Optimize CQE_TX handling net: thunderx: Optimize RBDR descriptor handling net: thunderx: Support for page recycling ipx: call ipxitf_put() in ioctl error path net: sched: add helpers to handle extended actions qed*: Fix issues in the ptp filter config implementation. qede: Fix concurrency issue in PTP Tx path processing. stmmac: Add support for SIMATIC IOT2000 platform net: hns: fix ethtool_get_strings overflow in hns driver tcp: fix wraparound issue in tcp_lp bpf, arm64: fix jit branch offset related to ldimm64 bpf, arm64: implement jiting of BPF_XADD ...
| * net: ethernet: ti: netcp_core: remove unused compl queue mappingIvan Khoronzhuk2017-04-251-4/+0
| | | | | | | | | | | | | | | | This code is unused and probably was unintentionally left while moving completion queue mapping in submit function. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: netcp: fix spelling mistake: "memomry" -> "memory"Colin Ian King2017-04-241-2/+1
| | | | | | | | | | | | | | | | Trivial fix to spelling mistake in dev_err message and rejoin line. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-04-061-6/+10
| |\ | | | | | | | | | | | | | | | | | | Mostly simple cases of overlapping changes (adding code nearby, a function whose name changes, for example). Signed-off-by: David S. Miller <davem@davemloft.net>
| * \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-03-232-3/+9
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/broadcom/genet/bcmmii.c drivers/net/hyperv/netvsc.c kernel/bpf/hashtab.c Almost entirely overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | mqprio: Modify mqprio to pass user parameters via ndo_setup_tc.Amritha Nambiar2017-03-151-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The configurable priority to traffic class mapping and the user specified queue ranges are used to configure the traffic class, overriding the hardware defaults when the 'hw' option is set to 0. However, when the 'hw' option is non-zero, the hardware QOS defaults are used. This patch makes it so that we can pass the data the user provided to ndo_setup_tc. This allows us to pull in the queue configuration if the user requested it as well as any additional hardware offload type requested by using a value other than 1 for the hw value. Finally it also provides a means for the device driver to return the level supported for the offload type via the qopt->hw value. Previously we were just always assuming the value to be 1, in the future values beyond just 1 may be supported. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | cpsw/netcp: refine cpts dependencyArnd Bergmann2017-04-281-1/+3
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tony Lindgren reports a kernel oops that resulted from my compile-time fix on the default config. This shows two problems: a) configurations that did not already enable PTP_1588_CLOCK will now miss the cpts driver b) when cpts support is disabled, the driver crashes. This is a preexisting problem that we did not notice before my patch. While the second problem is still being investigated, this modifies the dependencies again, getting us back to the original state, with another 'select NET_PTP_CLASSIFY' added in to avoid the original link error we got, and the 'depends on POSIX_TIMERS' to hide the CPTS support when turning it on would be useless. Cc: stable@vger.kernel.org # 4.11 needs this Fixes: 07fef3623407 ("cpsw/netcp: cpts depends on posix_timers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: ethernet: ti: cpsw: fix race condition during open()Sekhar Nori2017-04-041-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TI's cpsw driver handles both OF and non-OF case for phy connect. Unfortunately of_phy_connect() returns NULL on error while phy_connect() returns ERR_PTR(). To handle this, cpsw_slave_open() overrides the return value from phy_connect() to make it NULL or error. This leaves a small window, where cpsw_adjust_link() may be invoked for a slave while slave->phy pointer is temporarily set to -ENODEV (or some other error) before it is finally set to NULL. _cpsw_adjust_link() only handles the NULL case, and an oops results when ERR_PTR() is seen by it. Note that cpsw_adjust_link() checks PHY status for each slave whenever it is invoked. It can so happen that even though phy_connect() for a given slave returns error, _cpsw_adjust_link() is still called for that slave because the link status of another slave changed. Fix this by using a temporary pointer to store return value of {of_}phy_connect() and do a one-time write to slave->phy. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reported-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeoutGrygorii Strashko2017-04-021-0/+2
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | In case, if TX watchdog is fired some or all netdev TX queues will be stopped and as part of recovery it is required not only to drain and reinitailize CPSW TX channeles, but also wake up stoppted TX queues what doesn't happen now and netdevice will stop transmiting data until reopenned. Hence, add netif_tx_wake_all_queues() call in .ndo_tx_timeout() to complete recovery and restore TX path. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cpsw/netcp: cpts depends on posix_timersArnd Bergmann2017-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With posix timers having become optional, we get a build error with the cpts time sync option of the CPSW driver: drivers/net/ethernet/ti/cpts.c: In function 'cpts_find_ts': drivers/net/ethernet/ti/cpts.c:291:23: error: implicit declaration of function 'ptp_classify_raw';did you mean 'ptp_classifier_init'? [-Werror=implicit-function-declaration] This adds a hard dependency on PTP_CLOCK to avoid the problem, as building it without PTP support makes no sense anyway. Fixes: baa73d9e478f ("posix-timers: Make them configurable") Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cpsw/netcp: work around reverse cpts dependencyArnd Bergmann2017-03-222-2/+8
|/ | | | | | | | | | | | | | | | | | | | | | | The dependency is reversed: cpsw and netcp call into cpts, but cpts depends on the other two in Kconfig. This can lead to cpts being a loadable module and its callers built-in: drivers/net/ethernet/ti/cpsw.o: In function `cpsw_remove': cpsw.c:(.text.cpsw_remove+0xd0): undefined reference to `cpts_release' drivers/net/ethernet/ti/cpsw.o: In function `cpsw_rx_handler': cpsw.c:(.text.cpsw_rx_handler+0x2dc): undefined reference to `cpts_rx_timestamp' drivers/net/ethernet/ti/cpsw.o: In function `cpsw_tx_handler': cpsw.c:(.text.cpsw_tx_handler+0x7c): undefined reference to `cpts_tx_timestamp' drivers/net/ethernet/ti/cpsw.o: In function `cpsw_ndo_stop': As a workaround, I'm introducing another Kconfig symbol to control the compilation of cpts, while making the actual module controlled by a silent symbol that is =y when necessary. Fixes: 6246168b4a38 ("net: ethernet: ti: netcp: add support of cpts") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: cpsw: correct ale dev to cpswIvan Khoronzhuk2017-02-171-1/+1
| | | | | | | | The ale is a property of cpsw, so change dev to cpsw->dev, aka pdev->dev, to be consistent. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-02-161-1/+1
|\
| * net: ethernet: ti: cpsw: fix cpsw assignment in resumeIvan Khoronzhuk2017-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | There is a copy-paste error, which hides breaking of resume for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev) in suspend, but left it unchanged in resume. Fixes: 606f39939595a4d4540406bfc11f265b2036af6d (ti: cpsw: move platform data and slaves info to cpsw_common) Reported-by: Alexey Starikovskiy <AStarikovskiy@topcon.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: use var instead of func for usage countIvan Khoronzhuk2017-02-141-30/+12
| | | | | | | | | | | | | | | | | | | | | | | | The usage count function is based on ndev_running flag that is updated before calling ndo_open/close, but if ndo is called in another place, as with suspend/resume, the counter is not changed, that breaks sus/resume. For common resource no difference which device is using it, does matter only device count. So, replace usage count function on var and inc and dec it in ndo_open/close. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: return NET_XMIT_DROP if skb_padto failedIvan Khoronzhuk2017-02-111-1/+1
| | | | | | | | | | | | | | | | | | If skb_padto failed the skb has been dropped already, so it was consumed, but it doesn't mean it was sent, thus no need to update queue tx time, etc. So, return NET_XMIT_DROP as more appropriate. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: netcp_core: remove netif_trans_updateIvan Khoronzhuk2017-02-101-2/+0
| | | | | | | | | | | | | | | | No need to update jiffies in txq->trans_start twice and only for tx 0, it's supposed to be done in netdev_start_xmit() and per tx queue. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: Do not clobber PHY link outside of state machineFlorian Fainelli2017-02-071-2/+0
| | | | | | | | | | | | | | | | | | | | | | Calling phy_read_status() means that we may call into genphy_read_status() which in turn will use genphy_update_link() which can make changes to phydev->link outside of the state machine's state transitions. This is an invalid behavior that is now caught as off 811a919135b9 ("phy state machine: failsafe leave invalid RUNNING state") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: remove netif_trans_updateIvan Khoronzhuk2017-02-071-2/+0
| | | | | | | | | | | | | | | | | | No need to update jiffies in txq->trans_start twice, it's supposed to be done in netdev_start_xmit() and anyway is re-written. Also, no reason to update trans time in case of an error. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: fix NULL pointer dereference in switch modeGrygorii Strashko2017-02-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In switch mode on struct cpsw_slave->ndev field will be initialized with proper value only for the one cpsw slave port, as result cpsw_get_usage_count() will generate "Unable to handle kernel NULL pointer dereference" exception when first ethernet interface is opening cpsw_ndo_open(). This issue causes boot regression on AM335x EVM and reproducible on am57xx-evm (switch mode). Fix it by adding additional check for !cpsw->slaves[i].ndev in cpsw_get_usage_count(). Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Fixes: 03fd01ad0eea ("net: ethernet: ti: cpsw: don't duplicate ndev_running") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: generalize napi_complete_done()Eric Dumazet2017-01-303-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: clarify ethtool ops changing num of descsIvan Khoronzhuk2017-01-201-73/+59
| | | | | | | | | | | | | | | | | | After adding cpsw_set_ringparam ethtool op, better to carry out common parts of similar ops splitting descriptors in runtime. It allows to reuse these parts and shows what the ops actually do. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: don't duplicate common res in rx handlerIvan Khoronzhuk2017-01-201-24/+16
| | | | | | | | | | | | | | | | No need to duplicate the same function in rx handler to get info if any interface is running. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: don't duplicate ndev_runningIvan Khoronzhuk2017-01-201-14/+17
| | | | | | | | | | | | | | | | | | No need to create additional vars to identify if interface is running. So simplify code by removing redundant var and checking usage counter instead. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: don't disable interrupts in ndo_openIvan Khoronzhuk2017-01-201-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | No need to disable interrupts if no open devices, they are disabled anyway. Even no need to disable interrupts if some ndev is opened, In this case shared resources are not touched, only parameters of ndev shell, so no reason to disable them also. Removed lines have proved it. So, no need in redundant check and interrupt disable. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: remove dual check from common res usage functionIvan Khoronzhuk2017-01-201-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | Common res usage is possible only in case an interface is running. In case of not dual emac here can be only one interface, so while ndo_open and switch mode, only one interface can be opened, thus if open is called no any interface is running ... and no common res are used. So remove check on dual emac, it will simplify code/understanding and will match the name it's called. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: davinci_cpdma: correct check on NULL in set rateIvan Khoronzhuk2017-01-181-1/+2
| | | | | | | | | | | | | | Check "ch" on NULL first, then get ctlr. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-01-171-1/+1
|\ \ | |/
| * cpmac: remove hopeless #warningArnd Bergmann2017-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: correct netcp_get_stats function signatureKeerthy2017-01-111-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit: bc1f44709cf2 - net: make ndo_get_stats64 a void function and Commit: 6a8162e99ef3 - net: netcp: store network statistics in 64 bits. The commit 6a8162e99ef3 adds ndo_get_stats64 function as per old signature which causes compilation error: drivers/net/ethernet/ti/netcp_core.c:1951:28: error: initialization from incompatible pointer type .ndo_get_stats64 = netcp_get_stats, Hence correct netcp_get_stats function signature as per the latest definition. Signed-off-by: Keerthy <j-keerthy@ti.com> Fixes: 6a8162e99ef344fc ("net: netcp: store network statistics in 64 bits") Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: extend limits for cpsw_get/set_ringparamIvan Khoronzhuk2017-01-091-4/+3
| | | | | | | | | | | | | | | | | | | | Allow to set number of descs close to possible values. In case of minimum limit it's equal to number of channels to be able to set at least one desc per channel. For maximum limit leave enough descs number for tx channels. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: ale: add proper ale entry mask bits for netcp switch ALEKaricheri, Muralidharan2017-01-072-19/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For NetCP NU Switch ALE, some of the mask bits are different than defaults used in the driver. Add a new macro DEFINE_ALE_FIELD1 that use a configurable mask bits and use it in the driver. These bits are set to correct values by using the new variables added to cpsw_ale structure and re-used in the macros. The parameter nu_switch_ale is configured by the caller driver to indicate the ALE is for that switch and is used in the ALE driver to do customization as needed. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: ale: use ale_status to size the ale tableKaricheri, Muralidharan2017-01-072-4/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ALE h/w on newer version of NetCP (K2E/L/G) does provide a ALE_STATUS register for the size of the ALE Table implemented in h/w. Currently for example we set ALE Table size to 1024 for NetCP ALE on K2E even though the ALE Status/Documentation shows it has 8192 entries. So take advantage of this register to read the size of ALE table supported and use that value in the driver for the newer version of NetCP ALE. For NetCP lite, ALE Table size is much less (64) and indicated by a size of zero in ALE_STATUS. So use that as a default for now. While at it, also fix the ale table size on 10G switch to 2048 per User guide http://www.ti.com/lit/ug/spruhj5/spruhj5.pdf Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: ale: update to support unknown vlan controls for NU switchKaricheri, Muralidharan2017-01-073-7/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In NU Ethernet switch used on some of the Keystone SoCs, there is separate UNKNOWNVLAN register for membership, unreg mcast flood, reg mcast flood and force untag egress bits in ALE. So control for these fields require different address offset, shift and size of field. As this ALE has the same version number as ALE in CPSW found on other SoCs, customization based on version number is not possible. So use a configuration parameter, nu_switch_ale, to identify the ALE ALE found in NU Switch. Different treatment is needed for NU Switch ALE due to difference in the ale table bits, separate unknown vlan registers etc. The register information available in ale_controls, needs to be updated to support the netcp NU switch h/w. So it is not constant array any more since it needs to be updated based on ALE type. The header of the file is also updated to indicate it supports N port switch ALE, not just 3 port. The version mask is 3 bits in NU Switch ALE vs 8 bits on other ALE types. While at it, change the debug print to info print so that ALE version gets displayed in boot log. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: use hw capability to remove FCS word from rx packetsKaricheri, Muralidharan2017-01-073-4/+16
| | | | | | | | | | | | | | | | | | | | Some of the newer Ethernet switch hw (such as that on k2e/l/g) can strip the Etherenet FCS from packet at the port 0 egress of the switch. So use this capability instead of doing it in software. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: ethss: get phy-handle only if link interface is MAC-to-PHYKaricheri, Muralidharan2017-01-071-1/+3
| | | | | | | | | | | | | | | | | | | | Currently to parse phy-handle, driver doesn't check if the interface is MAC to PHY. This patch add this check for all MAC to PHY interface types supported by the driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: store network statistics in 64 bitsMichael Scherban2017-01-072-12/+74
| | | | | | | | | | | | | | | | | | | | | | | | Previously the network statistics were stored in 32 bit variable which can cause some stats to roll over after several minutes of high traffic. This implements 64 bit storage so larger numbers can be stored. Signed-off-by: Michael Scherban <m-scherban@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: remove the redundant memmov()Karicheri, Muralidharan2017-01-071-3/+3
| | | | | | | | | | | | | | | | | | | | The psdata is populated with command data by netcp modules to the tail of the buffer and set_words() copy the same to the front of the psdata. So remove the redundant memmov function call. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: extract eflag from desc for rx_hook handlingKaricheri, Muralidharan2017-01-072-3/+18
| | | | | | | | | | | | | | | | | | | | | | Extract the eflag bits from the received desc and pass it down the rx_hook chain to be available for netcp modules. Also the psdata and epib data has to be inspected by the netcp modules. So the desc can be freed only after returning from the rx_hook. So move knav_pool_desc_put() after the rx_hook processing. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: add support for ringparam configurationGrygorii Strashko2017-01-073-8/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CPDMA uses one pool of descriptors for both RX and TX which by default split between all channels proportionally depending on total number of CPDMA channels and number of TX and RX channels. As result, more descriptors will be consumed by TX path if there are more TX channels and there is no way now to dedicate more descriptors for RX path. So, add the ability to re-split CPDMA pool of descriptors between RX and TX path via ethtool '-G' command wich will allow to configure and fix number of descriptors used by RX and TX path, which, then, will be split between RX/TX channels proportionally depending on RX/TX channels number and weight. ethtool '-G' command will accept only number of RX entries and rest of descriptors will be arranged for TX automatically. Command: ethtool -G <devname> rx <number of descriptors> defaults and limitations: - minimum number of rx descriptors is 10% of total number of descriptors in CPDMA pool - maximum number of rx descriptors is 90% of total number of descriptors in CPDMA pool - by default, descriptors will be split equally between RX/TX path - any values passed in "tx" parameter will be ignored Usage: # ethtool -g eth0 Pre-set maximums: RX: 7372 RX Mini: 0 RX Jumbo: 0 TX: 0 Current hardware settings: RX: 4096 RX Mini: 0 RX Jumbo: 0 TX: 4096 # ethtool -G eth0 rx 7372 # ethtool -g eth0 Ring parameters for eth0: Pre-set maximums: RX: 7372 RX Mini: 0 RX Jumbo: 0 TX: 0 Current hardware settings: RX: 7372 RX Mini: 0 RX Jumbo: 0 TX: 820 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: ti: cpsw: add support for descs pool size configurationGrygorii Strashko2017-01-073-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CPSW CPDMA can process buffer descriptors placed as in internal CPPI RAM as in DDR. This patch adds support in CPSW and CPDMA for descs_pool_size mudule parameter, which defines total number of CPDMA CPPI descriptors to be used for both ingress/egress packets processing: - memory size, required for CPDMA descriptor pool, is calculated basing on number of descriptors specified by user in descs_pool_size and CPDMA descriptor size and allocated from coherent memory (CMA area); - CPDMA descriptor pool will be allocated in DDR if pool memory size > internal CPPI RAM or use internal CPPI RAM otherwise; - if descs_pool_size not specified in DT - the default value 256 will be used which will allow to place CPDMA descriptors pool into the internal CPPI RAM (current default behaviour); - CPDMA will ignore descs_pool_size if descs_pool_size = 0 for backward comaptiobility with davinci_emac. descs_pool_size is boot time setting and can't be changed once CPSW/CPDMA is initialized. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud