summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ti/davinci_mdio.c
Commit message (Collapse)AuthorAgeFilesLines
* drivers: net: davinci_mdio: enable pm runtime auto for ti cpsw-mdioGrygorii Strashko2016-06-281-11/+34
| | | | | | | | Use "ti,cpsw-mdio" to enable PM runtime auto-suspend on supported platforms, where MDIO is implemented as part of TI CPSW. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: davinci_mdio: implement pm runtime auto modeGrygorii Strashko2016-06-281-9/+39
| | | | | | | | | | | | | | | | | | | | | | | | Davinci MDIO is always used as slave device which services read/write requests from MDIO/PHY core. It doesn't use IRQ also. As result, It's possible to relax PM runtime constraints for Davinci MDIO and enable it on demand, instead of powering it during probe and powering off during removal. Hence, implement PM runtime autosuspend for Davinci MDIO, but keep it disabled by default, because Davinci MDIO is integrated in big set of TI devices and not all of them expected to work corectly with RPM autosuspend enabled: - expected to work on SoCs where MDIO is part of TI CPSW (cpsw.c DRA7/am57x, am437x, am335x, dm814x) - not verified on Keystone 2 and other SoCs where MDIO is used with TI EMAC IP (davinci_emac.c: dm6467-emac, am3517-emac, dm816-emac). Davinci MDIO RPM autosuspend can be enabled through sysfs: echo 100 > /sys/devices/../48484000.ethernet/48485000.mdio/power/autosuspend_delay_ms Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: davinci_mdio: add pm runtime callbacksGrygorii Strashko2016-06-281-4/+27
| | | | | | | | | | | Add PM runtime .runtime_suspend()/.runtime_resume() callbacks and perform Davinci MDIO enabling/disabling from these callbacks. This allows to reuse pm_runtime_force_suspend/resume() APIs during System suspend and required for further implementation of PM runtime autosuspend. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: davinci_mdio: split reset function on init_clk and enableGrygorii Strashko2016-06-281-7/+14
| | | | | | | | | | The Davinci MDIO MDIO_CONTROL.CLKDIV can be calculated only once during probe, hence split __davinci_mdio_reset() on davinci_mdio_init_clk() and davinci_mdio_enable(). Initialize and save CLKDIV in .probe(). Then just use saved value. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: davinci_mdio: drop suspended and lock fields from mdio_dataGrygorii Strashko2016-06-281-30/+0
| | | | | | | | | | | | | | It's not expected Davinci MDIO to be accessible after its suspend callbacks have been called: - all consumers of Davinci MDIO will stop/disconnect phys at Device suspend stage; - all phys are expected to be suspned already by PHY/MDIO core; - MDIO locking is done by MDIO Bus code. Hence, it's safe to drop "suspended" and "lock" fields from mdio_data. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: davinci_mdio: remove pm runtime calls from suspend callbacksGrygorii Strashko2016-06-281-3/+0
| | | | | | | | | PM runtime is disabled when Davinci MDIO .suspend_late() and .resume_early() callbacks are called. As result, any PM runtime calls here will be just a nop and can be removed. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: davinci_mdio: do pm runtime initialization later in probeGrygorii Strashko2016-06-281-9/+6
| | | | | | | | Do PM runtime initialization later in probe - this allows to simplify error handling a bit. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn2016-01-071-1/+1
| | | | | | | | | | Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add an mdio_device structureAndrew Lunn2016-01-071-1/+1
| | | | | | | | | Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: add phydev_name() wrapperAndrew Lunn2016-01-071-1/+1
| | | | | | | | Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: davinci_mdio: add hibernation callbacksGrygorii Strashko2015-03-011-2/+3
| | | | | | | | | | | | Setting a dev_pm_ops suspend_late/resume_early pair but not a set of hibernation functions means those pm functions will not be called upon hibernation. Fix this by using SET_LATE_SYSTEM_SLEEP_PM_OPS, which appropriately assigns the suspend and hibernation handlers and move davinci_mdio_x callbacks under CONFIG_PM_SLEEP to avoid build warnings. Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet: ti: remove unwanted THIS_MODULE macroVarka Bhadram2014-09-091-1/+0
| | | | | | | | It removes the owner field updation of driver structure. It will be automatically updated by module_platform_driver() Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: davinci_mdio: allow to create phys from dtGrygorii Strashko2014-07-161-2/+19
| | | | | | | | | | | | | | | | This patch allows to create PHYs from DT in case if they are explicitly defined. The of_mdiobus_register() is used for such purposes. For backward compatibility, call of_mdiobus_register() only in case if at least one PHY's child is defined in DT, otherwise rollback to mdiobus_register(). Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: davinci_mdio: Convert pr_err() to dev_err() callGeorge Cherian2014-05-151-1/+1
| | | | | | | | Convert the lone pr_err() to dev_err() call. Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: davinci_mdio: simplify IO memory mappingGrygorii Strashko2014-05-021-18/+3
| | | | | | | | | Simplify IO memory mapping by using devm_ioremap_resource() which will do all errors handling and reporting for us. Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: davinci_mdio: drop pinctrl_pm_select_default_state from probeGrygorii Strashko2014-05-021-3/+0
| | | | | | | | | | | | | The "default" pinctrl state is set by Drivers core now before calling the driver's probe. Hence, it's safe to drop pinctrl_pm_select_default_state() call from Davinci mdio driver probe. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: davinci_mdio: use devm_* apiGrygorii Strashko2014-05-021-19/+5
| | | | | | | | | | | Use devm_* API for memory allocation and to get device's clock to simplify driver's code. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: davinci_mdio: Fix sparse warningLad, Prabhakar2014-01-161-1/+1
| | | | | | | | | | This patch fixes following sparse warning davinci_mdio.c:85:27: warning: symbol 'default_pdata' was not declared. Should it be static? Also makes the default_pdata as a constant. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: davinci_mdio: use dev_get_platdata()Jingoo Han2013-08-301-1/+1
| | | | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: davinci_mdio: remove unnecessary dev_set_drvdata()Libo Chen2013-08-211-2/+0
| | | | | | | | Unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: davinci_mdio: use platform_{get,set}_drvdata()Libo Chen2013-08-201-2/+1
| | | | | | | | | | | Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Libo Chen <libo.chen@huawei.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2013-07-091-1/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
| * net: davinci_mdio: gaurd the DT code with IS_ENABLED(CONFIG_OF)Lad, Prabhakar2013-06-251-1/+4
| | | | | | | | | | | | | | | | guard the davinci_mdio_of_mtable table and davinci_mdio_probe_dt() with CONFIG_OF. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'pinctrl-for-v3.11-1' of ↵Linus Torvalds2013-07-031-0/+10
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile
| * drivers: net: davinci_mdio: use pinctrl PM helpersMugunthan V N2013-06-161-0/+10
| | | | | | | | | | | | | | | | | | This utilize the new pinctrl core PM helpers to transition the driver to "default" and "sleep" states. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | drivers: net: davinci_mdio: restore mdio clk divider in mdio resumeMugunthan V N2013-06-131-4/+1
| | | | | | | | | | | | | | | | | | During suspend resume cycle all the register data is lost, so MDIO clock divier value gets reset. This patch restores the clock divider value. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: davinci_mdio: moving mdio resume earlier than cpsw ethernet driverMugunthan V N2013-06-131-2/+2
| | | | | | | | | | | | | | | | | | MDIO driver should resume before CPSW ethernet driver so that CPSW connect to the phy and start tx/rx ethernet packets, changing the suspend/resume apis with suspend_late/resume_early. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/ti davinci_mdio: don't hold a spin lock while calling pm_runtimeSebastian Siewior2013-06-111-3/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | was playing with suspend and run into this: |BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:891 |in_atomic(): 1, irqs_disabled(): 0, pid: 1963, name: bash |6 locks held by bash/1963: |CPU: 0 PID: 1963 Comm: bash Not tainted 3.10.0-rc4+ #50 |[<c0014fdc>] (unwind_backtrace+0x0/0xf8) from [<c0011da4>] (show_stack+0x10/0x14) |[<c0011da4>] (show_stack+0x10/0x14) from [<c02e8680>] (__pm_runtime_idle+0xa4/0xac) |[<c02e8680>] (__pm_runtime_idle+0xa4/0xac) from [<c0341158>] (davinci_mdio_suspend+0x6c/0x9c) |[<c0341158>] (davinci_mdio_suspend+0x6c/0x9c) from [<c02e0628>] (platform_pm_suspend+0x2c/0x54) |[<c02e0628>] (platform_pm_suspend+0x2c/0x54) from [<c02e52bc>] (dpm_run_callback.isra.3+0x2c/0x64) |[<c02e52bc>] (dpm_run_callback.isra.3+0x2c/0x64) from [<c02e57e4>] (__device_suspend+0x100/0x22c) |[<c02e57e4>] (__device_suspend+0x100/0x22c) from [<c02e67e8>] (dpm_suspend+0x68/0x230) |[<c02e67e8>] (dpm_suspend+0x68/0x230) from [<c0072a20>] (suspend_devices_and_enter+0x68/0x350) |[<c0072a20>] (suspend_devices_and_enter+0x68/0x350) from [<c0072f18>] (pm_suspend+0x210/0x24c) |[<c0072f18>] (pm_suspend+0x210/0x24c) from [<c0071c74>] (state_store+0x6c/0xbc) |[<c0071c74>] (state_store+0x6c/0xbc) from [<c02714dc>] (kobj_attr_store+0x14/0x20) |[<c02714dc>] (kobj_attr_store+0x14/0x20) from [<c01341a0>] (sysfs_write_file+0x16c/0x19c) |[<c01341a0>] (sysfs_write_file+0x16c/0x19c) from [<c00ddfe4>] (vfs_write+0xb4/0x190) |[<c00ddfe4>] (vfs_write+0xb4/0x190) from [<c00de3a4>] (SyS_write+0x3c/0x70) |[<c00de3a4>] (SyS_write+0x3c/0x70) from [<c000e2c0>] (ret_fast_syscall+0x0/0x48) I don't see a reason why the pm_runtime call must be under the lock. Further I don't understand why this is a spinlock and not mutex. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ti: add MODULE_DEVICE_TABLE + MODULE_LICENSESebastian Siewior2013-04-251-0/+1
| | | | | | | | | | If compiled as modules each one of these modules is missing something. With this patch the modules are loaded on demand and don't taint the kernel due to license issues. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet: Remove unnecessary alloc/OOM messages, alloc cleanupsJoe Perches2013-02-041-3/+1
| | | | | | | | | | | | | | | | alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/davinci_emac: remove __dev* attributesBill Pemberton2012-12-031-3/+3
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: davinci_mdio: Fix typo mistake in calling runtime-pm apiVaibhav Hiremath2012-11-141-1/+1
| | | | | | | | | | | | | | | | | | By mistake (most likely a copy-paste), instead of pm_runtime_get_sync() api, driver is calling pm_runtime_put_sync() api in resume callback function. The bug was introduced by commit id (ae2c07aaf74: davinci_mdio: runtime PM support). Now, the reason why it didn't impact functionality is, the patch has been tested on AM335x-EVM and BeagleBone platform while submitting; and in case of AM335x the MDIO driver doesn't control the module enable/disable part, which is handled by CPSW driver. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-09-151-1/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: net/netfilter/nfnetlink_log.c net/netfilter/xt_LOG.c Rather easy conflict resolution, the 'net' tree had bug fixes to make sure we checked if a socket is a time-wait one or not and elide the logging code if so. Whereas on the 'net-next' side we are calculating the UID and GID from the creds using different interfaces due to the user namespace changes from Eric Biederman. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ethernet: fix kernel OOPS when remove davinci_mdio moduleBin Liu2012-08-311-1/+3
| | | | | | | | | | | | | | | | | | | | davinci mdio device is not unregistered from mdiobus when removing the module, which causes BUG_ON() when free the device from mdiobus. Calling mdiobus_unregister() before mdiobus_free() fixes the issue. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: ethernet: davince_mdio: device tree implementationMugunthan V N2012-08-071-4/+37
|/ | | | | | | device tree implementation for davinci mdio driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* driver: net: ethernet: davinci_mdio: runtime PM supportMugunthan V N2012-07-181-13/+12
| | | | | | | Enabling runtime PM support for davinci mdio driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* davinci_mdio: Fix MDIO timeout checkChristian Riesch2012-04-171-0/+5
| | | | | | | | | | | | | | | | | Under heavy load (flood ping) it is possible for the MDIO timeout to expire before the loop checks the GO bit again. This patch adds an additional check whether the operation was done before actually returning -ETIMEDOUT. To reproduce this bug, flood ping the device, e.g., ping -f -l 1000 After some time, a "timed out waiting for user access" warning may appear. And even worse, link may go down since the PHY reported a timeout. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: <stable@vger.kernel.org> Cc: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* davinci_mdio: Correct bitmask for clock divider valueChristian Riesch2012-02-241-1/+1
| | | | | | | | The CLKDIV bitfield in the MDIO Control Register is a 16 bit field, therefore the CLKDIV value may range from 0 to 0xffff. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/ethernet/ti: Move call to PTR_ERR after reassignmentJulia Lawall2012-02-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | PTR_ERR should be called before its argument is cleared. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1; constant c; @@ *e = c ... when != e = e1 when != &e when != true IS_ERR(e) *PTR_ERR(e) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reported-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* davinci_emac: use an unique MDIO bus name.Florian Fainelli2012-01-101-1/+2
| | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* davinci*/tlan/cpmac: Move the Texas Instruments (TI) driversJeff Kirsher2011-08-121-0/+475
Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and make the necessary Kconfig and Makefile changes. CC: Sriram <srk@ti.com> CC: Vinay Hegde <vinay.hegde@ti.com> CC: Cyril Chemparathy <cyril@ti.com> CC: Samuel Chessman <chessman@tux.org> CC: <torben.mathiasen@compaq.com> CC: Eugene Konev <ejka@imfi.kspu.ru> CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud