summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro
Commit message (Collapse)AuthorAgeFilesLines
* net: stmmac: unify registers dumps methodsLABBE Corentin2017-02-249-121/+71
| | | | | | | | | | | | | | The stmmac driver have two methods for registers dumps: via ethtool and at init (if NETIF_MSG_HW is enabled). It is better to keep only one method, ethtool, since the other was ugly. This patch convert all dump_regs() function from "printing regs" to "fill the reg_space used by ethtool". Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: stmmac: dwmac-rk: Add RK3328 gmac supportdavid.wu2017-02-191-0/+117
| | | | | | | | | Add constants and callback functions for the dwmac on rk3328 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: david.wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: invert the logic for dumping regsLABBE Corentin2017-02-151-9/+9
| | | | | | | | | It is easier to follow the logic by removing the not operator Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: reduce indentation by adding a continueLABBE Corentin2017-02-151-42/+40
| | | | | | | | | | As suggested by Joe Perches, replacing the "if phydev" logic permit to reduce indentation in the for loop. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: split the stmmac_adjust_link 10/100 caseLABBE Corentin2017-02-151-5/+9
| | | | | | | | | | The 10/100 case have too many ifcase. This patch split it for removing an if. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: run stmmac_hw_fix_mac_speed when speed is validLABBE Corentin2017-02-151-3/+2
| | | | | | | | | | This patch mutualise a bit by running stmmac_hw_fix_mac_speed() after the switch in case of valid speed. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: set speed at SPEED_UNKNOWN in case of broken speedLABBE Corentin2017-02-151-0/+1
| | | | | | | | | | | | In case of invalid speed given, stmmac_adjust_link() still record it as current speed. This patch modify the default case to set speed as SPEED_UNKNOWN if not 10/100/1000. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: use SPEED_UNKNOWN/DUPLEX_UNKNOWNLABBE Corentin2017-02-151-6/+6
| | | | | | | | | | | It is better to use DUPLEX_UNKNOWN instead of just "-1". Using 0 for an invalid speed is bad since 0 is a valid value for speed. So this patch replace 0 by SPEED_UNKNOWN. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: likely is useless in occasional functionLABBE Corentin2017-02-151-4/+4
| | | | | | | | | | | The stmmac_adjust_link() function is called too rarely for having likely() macros being useful. Just remove likely annotation in it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: remove useless parenthesisLABBE Corentin2017-02-152-5/+5
| | | | | | | | | This patch remove some useless parenthesis. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: replace unsigned by u32LABBE Corentin2017-02-081-2/+2
| | | | | | | | | | checkpatch complains about two unsigned without type after. Since the value return is u32, it is simpler to replace it by u32 instead of "unsigned int" Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: remove unused variable in sysfs_display_ringLABBE Corentin2017-02-081-3/+0
| | | | | | | | | The u64 x variable in sysfs_display_ring is unused. This patch remove it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: remove dead code in stmmac_tx_cleanLABBE Corentin2017-02-081-7/+0
| | | | | | | | | | | Since commit cf32deec16e4 ("stmmac: add tx_skbuff_dma to save descriptors used by PTP"), the struct dma_desc *p in stmmac_tx_clean was not used at all. This patch remove this dead code. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: print phy informationLABBE Corentin2017-02-081-3/+1
| | | | | | | | | When a PHY is found, printing which one was found (and which type/model) is a good information to know. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: rename rx_crc to rx_crc_errorsLABBE Corentin2017-02-085-5/+5
| | | | | | | | | | | | | The ethtool stat counter rx_crc from stmmac is mis-named, the name seems to speak about the number of RX CRC done, but in fact it is about errors. This patch rename it to rx_crc_errors, just like the same ifconfig counter. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Rewrite two test against NULL valueLABBE Corentin2017-02-081-2/+2
| | | | | | | | This patch rewrite two test against NULL value with correct style. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Correct the error message about invalid speedLABBE Corentin2017-02-081-2/+1
| | | | | | | | | The message about invalid speed does not state 1000 as a valid speed. It is much simpler to said that the speed is invalid. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: replace ENOSYS by EINVALLABBE Corentin2017-02-081-1/+1
| | | | | | | | | | As said by checkpatch ENOSYS means 'invalid syscall nr' and nothing else. This patch replace ENOSYS by the more appropriate value EINVAL. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Use readl_poll_timeoutLABBE Corentin2017-02-081-8/+6
| | | | | | | | | The dwmac_dma_reset function use an open coded of readl_poll_timeout(). Replace the open coded handling with the proper function. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: replace stmmac_mdio_busy_wait by readl_poll_timeoutLABBE Corentin2017-02-081-22/+11
| | | | | | | | | | The stmmac_mdio_busy_wait() function do the same job than readl_poll_timeout(). So is is better to replace it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: fix some code style problemLABBE Corentin2017-02-081-3/+4
| | | | | | | | | Checkpatch complains about some code style problem on stmmac_mdio.c. This patch fix them. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: remplace asm/io.h by linux/io.hLABBE Corentin2017-02-081-3/+3
| | | | | | | | This patch fix the checkpatch warning about asm/io.h. Sorting all includes in the process. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: remove freesoftware addressLABBE Corentin2017-02-0826-104/+0
| | | | | | | | This patch fix the checkpatch warning about free software address. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: fix some typos in commentsLABBE Corentin2017-02-083-12/+12
| | | | | | | | This patch fix some typos in comments. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Remove the bus_setup function pointerLABBE Corentin2017-02-081-4/+0
| | | | | | | | The bus_setup function pointer is not used at all, this patch remove it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: fix the typo on MAC_RNABLE_RXLABBE Corentin2017-02-082-3/+3
| | | | | | | | the define MAC_RNABLE_RX have a typo, rename it to MAC_ENABLE_RX Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Fix wrong message in stmmac_probe_config_dtHeiner Kallweit2017-02-021-1/+1
| | | | | | | | | | Most likely a copy & paste error in referenced commit. Restore the debug message to what it was before. Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: add separate warning for PTP not being supported by HWHeiner Kallweit2017-02-021-2/+4
| | | | | | | | | Chips like Amlogic S905GXBB are supported by this driver but don't have support for PTP. Add a separate warning for missing HW support to differentiate it from other actual failures. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: don't set tx delay in RGMII_ID and RGMII_TXID modeHeiner Kallweit2017-02-021-7/+9
| | | | | | | | As documented in Documentation/devicetree/bindings/net/ethernet.txt, in RGMII_ID and RGMII_TXID mode the MAC should not add a tx delay. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-02-021-0/+4
|\ | | | | | | | | | | All merge conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * stmmac: Discard masked flags in interrupt status registerAlexey Brodkin2017-01-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DW GMAC databook says the following about bits in "Register 15 (Interrupt Mask Register)": --------------------------->8------------------------- When set, this bit __disables_the_assertion_of_the_interrupt_signal__ because of the setting of XXX bit in Register 14 (Interrupt Status Register). --------------------------->8------------------------- In fact even if we mask one bit in the mask register it doesn't prevent corresponding bit to appear in the status register, it only disables interrupt generation for corresponding event. But currently we expect a bit different behavior: status bits to be in sync with their masks, i.e. if mask for bit A is set in the mask register then bit A won't appear in the interrupt status register. This was proven to be incorrect assumption, see discussion here [1]. That misunderstanding causes unexpected behaviour of the GMAC, for example we were happy enough to just see bogus messages about link state changes. So from now on we'll be only checking bits that really may trigger an interrupt. [1] https://lkml.org/lkml/2016/11/3/413 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Phil Reid <preid@electromag.com.au> Cc: David Miller <davem@davemloft.net> Cc: Alexandre Torgue <alexandre.torgue@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: generalize napi_complete_done()Eric Dumazet2017-01-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: stmmac: dwmac-meson8b: make the RGMII TX delay configurableMartin Blumenstingl2017-01-241-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to this patch we were using a hardcoded RGMII TX clock delay of 2ns (= 1/4 cycle of the 125MHz RGMII TX clock). This value works for many boards, but unfortunately not for all (due to the way the actual circuit is designed, sometimes because the TX delay is enabled in the PHY, etc.). Making the TX delay on the MAC side configurable allows us to support all possible hardware combinations. This allows fixing a compatibility issue on some boards, where the RTL8211F PHY is configured to generate the TX delay. We can now turn off the TX delay in the MAC, because otherwise we would be applying the delay twice (which results in non-working TX traffic). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: stmicro: fix LS field mask in EEE configurationjpinto2017-01-221-1/+1
| | | | | | | | | | | | | | | | | | This patch fixes the LS mask when setting EEE timer. LS field is 10 bits long and not 11 as currently. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Reported-By: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | stmicro: add more information to Kconfigjpinto2017-01-182-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds more info to stmicro' Kconfig files in order to be clearer that the driver can be used by ethernet cards based on 10/100/1000/EQOS Synopsys IP Cores. EQOS was also added stmmac/Kconfig Kconfig, since dwmac4 is in fact EQoS, one of Synopsys Ethernet IPs. More info at: https://www.synopsys.com/dw/ipdir.php?ds=dwc_ether_qos Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-01-172-9/+11
|\ \ | |/
| * stmmac: add missing of_node_putJulia Lawall2017-01-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function stmmac_dt_phy provides several possibilities for initializing plat->mdio_node, all of which have the effect of increasing the reference count of the assigned value. This field is not updated elsewhere, so the value is live until the end of the lifetime of plat (devm_allocated), just after the end of stmmac_remove_config_dt. Thus, add an of_node_put on plat->mdio_node in stmmac_remove_config_dt. It is possible that the field mdio_node is never initialized, but of_node_put is NULL-safe, so it is also safe to call of_node_put in that case. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registeredHeiner Kallweit2017-01-161-9/+10
| | | | | | | | | | | | | | | | | | | | Don't use netdev_info and friends before the net_device is registered. This avoids ugly messages like "meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | stmmac: indent an if statementDan Carpenter2017-01-151-1/+1
| | | | | | | | | | | | | | The break statement should be indented one more tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-01-092-1/+15
|\ \ | |/
| * net: stmmac: fix maxmtu assignment to be within valid rangeKweh, Hock Leong2017-01-082-1/+15
| | | | | | | | | | | | | | | | | | | | There is no checking valid value of maxmtu when getting it from device tree. This resolution added the checking condition to ensure the assignment is made within a valid range. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | stmmac: adding new glue driver dwmac-dwc-qos-ethjpinto2017-01-094-3/+224
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new glue driver called dwmac-dwc-qos-eth which was based in the dwc_eth_qos as is. To assure retro-compatibility a slight tweak was also added to stmmac_platform. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Lars Persson <larper@axis.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structurejpinto2017-01-095-75/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to the plat_stmmacenet_data structure. It also moves these platform variables initialization to stmmac_platform. This was done for two reasons: a) If PCI is used, platform related code is being executed in stmmac_main resulting in warnings that have no sense and conceptually was not right b) stmmac as a synopsys reference ethernet driver stack will be hosting more and more drivers to its structure like synopsys/dwc_eth_qos.c. These drivers have their own DT bindings that are not compatible with stmmac's. One of the most important are the clock names, and so they need to be parsed in the glue logic and initialized there, and that is the main reason why the clocks were passed to the platform structure. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Lars Persson <larper@axis.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | stmmac: adding DT parameter for LPI tx clock gatingjpinto2017-01-096-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new parameter to the stmmac DT: snps,en-tx-lpi-clockgating. It was ported from synopsys/dwc_eth_qos.c and it is useful if lpi tx clock gating is needed by stmmac users also. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Lars Persson <larper@axis.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-01-052-66/+46
|\ \ | |/
| * net: stmmac: dwmac-oxnas: use generic pm implementationJohan Hovold2017-01-031-33/+5
| | | | | | | | | | | | | | | | Now that we have an exit callback in place, add init as well and get rid of the custom PM callbacks in favour of the generic ones. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: stmmac: dwmac-oxnas: fix fixed-link-phydev leaksJohan Hovold2017-01-031-15/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | Make sure to deregister and free any fixed-link phy registered during probe on probe errors and on driver unbind by calling the new glue helper function. For driver unbind, use the generic stmmac-platform remove implementation and add an exit callback to disable the clock. Fixes: 5ed7414062e7 ("net: stmmac: Add OXNAS Glue Driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: stmmac: dwmac-oxnas: fix of-node leakJohan Hovold2017-01-031-8/+2
| | | | | | | | | | | | | | | | | | Use the syscon lookup-by-phandle helper so that the reference taken by of_parse_phandle() is released when done with the node. Fixes: 5ed7414062e7 ("net: stmmac: Add OXNAS Glue Driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: stmmac: Fix error path after register_netdev moveFlorian Fainelli2016-12-291-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | Commit 5701659004d6 ("net: stmmac: Fix race between stmmac_drv_probe and stmmac_open") re-ordered how the MDIO bus registration and the network device are registered, but missed to unwind the MDIO bus registration in case we fail to register the network device. Fixes: 5701659004d6 ("net: stmmac: Fix race between stmmac_drv_probe and stmmac_open") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: stmmac: Fix race between stmmac_drv_probe and stmmac_openFlorian Fainelli2016-12-271-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is currently a small window during which the network device registered by stmmac can be made visible, yet all resources, including and clock and MDIO bus have not had a chance to be set up, this can lead to the following error to occur: [ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): stmmac_dvr_probe: warning: cannot get CSR clock [ 473.919382] stmmaceth 0000:01:00.0: no reset control found [ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42 [ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported [ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported [ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported [ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer [ 473.921395] libphy: PHY stmmac-1:00 not found [ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY [ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to PHY (error: -19) [ 473.959710] libphy: stmmac: probed [ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active [ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL (stmmac-1:01) [ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL (stmmac-1:02) [ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL (stmmac-1:03) Fix this by making sure that register_netdev() is the last thing being done, which guarantees that the clock and the MDIO bus are available. Fixes: 4bfcbd7abce2 ("stmmac: Move the mdio_register/_unregister in probe/remove") Reported-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud