summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/realtek/8139too.c
Commit message (Collapse)AuthorAgeFilesLines
* 8139too: Add netif_napi_del in the driverJia-Ju Bai2014-12-221-0/+2
| | | | | | | | | | For linux-3.18.0 The driver lacks netif_napi_del in the normal path and error path to match the call of netif_napi_add in rtl8139_init_one. This patch fixes this problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: Fix the lack of pci_disable_deviceJia-Ju Bai2014-12-221-1/+1
| | | | | | | | | | | For linux-3.18.0 When pci_request_regions is failed in rtl8139_init_board, pci_disable_device is not called to disable the device which are enabled by pci_enable_device, because of disable_dev_on_err is not assigned 1. This patch fix this problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet/realtek: use napi_alloc_skb instead of netdev_alloc_skb_ip_alignAlexander Duyck2014-12-101-1/+1
| | | | | | | | | | | This replaces most of the calls to netdev_alloc_skb_ip_align in the Realtek drivers. The one instance I didn't replace in 8139cp.c is because it was called as a part of init and as such is not always accessed from the softirq context. Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: The maximum MTU should allow for VLAN headersAlban Bedel2014-11-241-3/+4
| | | | | | | | As pointed out by Ben Hutchings drivers that allow using VLAN have to provide enough headroom for the VLAN tags. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: Allow using the largest possible MTUAlban Bedel2014-11-101-1/+1
| | | | | | | | | | This driver allows MTU up to 1518 bytes which is not enought to run batman-adv. Simply raise the maximum packet size up to the maximum allowed by the transmit descriptor, 1792 bytes, giving a maximum MTU of 1774 bytes. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: Allow setting MTU larger than 1500Alban Bedel2014-11-101-1/+12
| | | | | | | | Replace the default ndo_change_mtu callback with one that allow setting MTU that the driver can handle. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine2014-08-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman2014-03-141-4/+4
| | | | | | | | | | | | | | | Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: Call dev_kfree_skby_any instead of dev_kfree_skb.Eric W. Biederman2014-03-121-2/+2
| | | | | | | | Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'core-locking-for-linus' of ↵Linus Torvalds2013-11-141-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "The biggest changes: - add lockdep support for seqcount/seqlocks structures, this unearthed both bugs and required extra annotation. - move the various kernel locking primitives to the new kernel/locking/ directory" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) block: Use u64_stats_init() to initialize seqcounts locking/lockdep: Mark __lockdep_count_forward_deps() as static lockdep/proc: Fix lock-time avg computation locking/doc: Update references to kernel/mutex.c ipv6: Fix possible ipv6 seqlock deadlock cpuset: Fix potential deadlock w/ set_mems_allowed seqcount: Add lockdep functionality to seqcount/seqlock structures net: Explicitly initialize u64_stats_sync structures for lockdep locking: Move the percpu-rwsem code to kernel/locking/ locking: Move the lglocks code to kernel/locking/ locking: Move the rwsem code to kernel/locking/ locking: Move the rtmutex code to kernel/locking/ locking: Move the semaphore core to kernel/locking/ locking: Move the spinlock code to kernel/locking/ locking: Move the lockdep code to kernel/locking/ locking: Move the mutex code to kernel/locking/ hung_task debugging: Add tracepoint to report the hang x86/locking/kconfig: Update paravirt spinlock Kconfig description lockstat: Report avg wait and hold times lockdep, x86/alternatives: Drop ancient lockdep fixup message ...
| * net: Explicitly initialize u64_stats_sync structures for lockdepJohn Stultz2013-11-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to enable lockdep on seqcount/seqlock structures, we must explicitly initialize any locks. The u64_stats_sync structure, uses a seqcount, and thus we need to introduce a u64_stats_init() function and use it to initialize the structure. This unfortunately adds a lot of fairly trivial initialization code to a number of drivers. But the benefit of ensuring correctness makes this worth while. Because these changes are required for lockdep to be enabled, and the changes are quite trivial, I've not yet split this patch out into 30-some separate patches, as I figured it would be better to get the various maintainers thoughts on how to best merge this change along with the seqcount lockdep enablement. Feedback would be appreciated! Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Roger Luethi <rl@hellgate.ch> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Horman <horms@verge.net.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Wensong Zhang <wensong@linux-vs.org> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | net: 8139too: remove unnecessary pci_set_drvdata()Jingoo Han2013-10-221-1/+0
|/ | | | | | | | | The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers:net: Remove unnecessary OOM messages after netdev_alloc_skbJoe Perches2013-03-091-2/+0
| | | | | | | | | | | | | | | | Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* remove init of dev->perm_addr in driversJiri Pirko2013-01-081-1/+0
| | | | | | | | perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: remove __dev* attributesBill Pemberton2012-12-031-7/+7
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sections: fix section conflicts in drivers/netAndi Kleen2012-10-061-1/+1
| | | | | | | Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 8139cp/8139too: terminate the eeprom access with the right opmodeJason Wang2012-06-011-1/+1
| | | | | | | | | | | | | | Currently, we terminate the eeprom access through clearing the CS by: RTL_W8 (Cfg9346, ~EE_CS); or writeb (~EE_CS, ee_addr); This would left the eeprom into "Config. Register Write Enable:" state which is not expcted as the highest two bits were set to 0x11 ( expected is the "Normal" mode (0x00)). Solving this by write 0x0 instead of ~EE_CS when terminating the eeprom access. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: dev->{base_addr, irq} removal.Francois Romieu2012-04-071-80/+56
| | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
* 8139too: Add 64bit statisticsJunchang Wang2012-03-061-8/+38
| | | | | | | | Switch to use ndo_get_stats64 to get 64bit statistics. Two sync entries are used (one for Rx and one for Tx). Signed-off-by: Junchang Wang <junchangwang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: Support RX-FCS flag.Ben Greear2012-02-241-1/+5
| | | | | | | This allows the NIC to pass the Ethernet FCS on up the stack, and is useful when sniffing networks. Signed-off-by: Ben Greear <greearb@candelatech.com>
* 8139too: Support RX-ALL logic.Ben Greear2012-02-241-0/+52
| | | | | | | | | This allows the NIC to receive Runts and frames with bad Ethernet Frame Checksums (FCS). Useful to sniffing & diagnosing bad networks. Signed-off-by: Ben Greear <greearb@candelatech.com>
* drivers/net: Remove alloc_etherdev error messagesJoe Perches2012-01-311-3/+2
| | | | | | | | alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139cp/8139too: do not read into reserved registersJason Wang2012-01-031-1/+1
| | | | | | | | delay_eeprom() use long read for Cfg9346 register(offset 0x50) which may read into the area of reserved register(offset 0x53). Use byte read instead. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sweep the floors and convert some .get_drvinfo routines to strlcpyRick Jones2011-11-081-3/+3
| | | | | | | | | | Per the mention made by Ben Hutchings that strlcpy is now the preferred string copy routine for a .get_drvinfo routine, do a bit of floor sweeping and convert some of the as-yet unconverted ethernet drivers to it. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: remove use of ndo_set_multicast_list in driversJiri Pirko2011-08-171-1/+1
| | | | | | | replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139*/atp/r8169/sc92031: Move the Realtek driversJeff Kirsher2011-08-111-0/+2622
Move the Realtek drivers into drivers/net/ethernet/realtek/ and make the necessary Kconfig and Makefile changes. CC: Realtek linux nic maintainers <nic_swsd@realtek.com> CC: Francois Romieu <romieu@fr.zoreil.com> CC: Jeff Garzik <jgarzik@pobox.com> CC: Donald Becker <becker@scyld.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud