summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox
Commit message (Collapse)AuthorAgeFilesLines
* mlx4: Disable HA for SRIOV PF RoCE devicesOr Gerlitz2015-06-251-1/+7
| | | | | | | | | | | | When in HA mode, the driver exposes an IB (RoCE) device instance with only one port. Under SRIOV, the existing implementation doesn't go well with the PF RoCE driver's role of Special QPs Para-Virtualization, etc. As such, disable HA for the mlx4 PF RoCE device in SRIOV mode. Fixes: a57500903093 ('IB/mlx4: Add port aggregation support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Fix wrong csum complete report when rxvlan offload is disabledIdo Shamay2015-06-251-11/+6
| | | | | | | | | | | | | | The check_csum() function relied on hwtstamp_rx_filter to know if rxvlan offload is disabled. This is wrong since rxvlan offload can be switched on/off regardless of hwtstamp_rx_filter. Also moved check_csum to query CQE information to identify VLAN packets and removed the check of IP packets, since it has been validated before. Fixes: f8c6455bb04b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE') Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Wake TX queues only when there's enough roomIdo Shamay2015-06-252-8/+12
| | | | | | | | | | | | | | | | | | | | Indication of a single completed packet, marked by txbbs_skipped being bigger then zero, in not enough in order to wake up a stopped TX queue. The completed packet may contain a single TXBB, while next packet to be sent (after the wake up) may have multiple TXBBs (LSO/TSO packets for example), causing overflow in queue followed by WQE corruption and TX queue timeout. Instead, wake the stopped queue only when there's enough room for the worst case (maximum sized WQE) packet that we should need to handle after the queue is opened again. Also created an helper routine - mlx4_en_is_tx_ring_full, which checks if the current TX ring is full or not. It provides better code readability and removes code duplication. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Release TX QP when destroying TX ringEran Ben Elisha2015-06-253-5/+1
| | | | | | | | | | | TX ring QP wasn't released at mlx4_en_destroy_tx_ring. Instead, the code used the deprecated base_tx_qpn field. Move TX QP release to mlx4_en_destroy_tx_ring and remove the base_tx_qpn field. Fixes: ddae0349fdb7 ('net/mlx4: Change QP allocation scheme') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2015-06-2444-636/+8212
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-06-241-0/+8
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/mellanox/mlx4/main.c net/packet/af_packet.c Both conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlx4_core: Disable Granular QoS per VF under IB/Eth VPI configurationOr Gerlitz2015-06-151-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to firmware bug, under VPI configuration when port1 = IB and port2 = Eth, Granular QoS per VF isn't working properly. More over, the whole QP0/QP1 Para-Virtualization in the mlx4 IB driver is broken on that config. Hence, we must disable Granular QoS per VF under that configuration till a fix is introduced. Once that happens, a new device capability will be used to mark the feature support on that specific configuration. Reported-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Prefetch skb data on RXSaeed Mahameed2015-06-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Prefetch the 1st cache line used by the buffer pointed by the skb linear data. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Pop cq outside mlx5e_get_cqeAchiad Shochat2015-06-243-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate between mlx5e_get_cqe() and mlx5_cqwq_pop(), this helps for better code readability and better CQ buffer management. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Remove mlx5e_cq.sqrq back-pointerAchiad Shochat2015-06-245-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use container_of() instead. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Remove extra spacesAchiad Shochat2015-06-241-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Coding Style fix, remove extra spaces. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Avoid TX CQE generation if more xmit packets expectedAchiad Shochat2015-06-241-23/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to save PCI BW consumed by TX CQEs and to reduce the amount of CPU cache misses caused by TX CQE reading, we request TX CQE generation only when skb->xmit_more=0. As a consequence of the above, a single TX CQE may now indicate the transmission completion of multiple TX SKBs. This also handles a problem introduced in commit b1b8105ebf41 "net/mlx5e: Support NETIF_F_SG" where we didn't ask for NOP completions while the driver didn't have the proper code to handle this case. Fixes: b1b8105ebf41 ('net/mlx5e: Support NETIF_F_SG') Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completionAchiad Shochat2015-06-241-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | NOP completion SKBs are always NULL. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()Achiad Shochat2015-06-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | It is already assigned at mlx5e_build_rq_param() Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting themSaeed Mahameed2015-06-241-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of counting number of gso fragments, we can use skb_shinfo(skb)->gso_segs. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queuesSaeed Mahameed2015-06-243-33/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To save per-packet calculations, we use the following static mappings: 1) priv {channel, tc} to netdev txq (used @mlx5e_selec_queue()) 2) netdev txq to priv sq (used @mlx5e_xmit()) Thanks to these static mappings, no more need for a separate implementation of ndo_start_xmit when multiple TCs are configured. We believe the performance improvement of such separation would be negligible, if any. The previous way of dynamically calculating the above mappings required allocating more TX queues than actually used (@alloc_etherdev_mqs()), which is now no longer needed. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF deviceEran Ben Elisha2015-06-241-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under SRIOV, the port rx/tx bytes/packets statistics should by read from the HW instead of using the PF netdevice SW accounting. This is needed in order to get the full port statistics and not just the PF own ones Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_en: Fix off-by-four in ethtoolEran Ben Elisha2015-06-241-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NUM_ALL_STATS was not updated with the new four entries, instead NUM_FLOW_STATS was updated, fix it. that caused off-by-four for all counters below pf_*_*. Fixes: b42de4d01264 ('net/mlx4_en: Show PF own statistics via ethtool') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker2015-06-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_en: Support ndo_get_vf_statsEran Ben Elisha2015-06-154-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement the ndo to gather VF statistics through the PF. All counters related to this VF are stored in a per slave list, run over the slave's list and collect all statistics. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_en: Show PF own statistics via ethtoolEran Ben Elisha2015-06-155-3/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the user to observe the PF own statistics using ethtool with pf_ prefixed counter names. Those counters are the PF statistics out of the overall port statistics. Every PF QP is attached to a counter and the summary of those counters is the PF statistics. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_core: Add helper to query countersEran Ben Elisha2015-06-151-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an infrastructure step for querying VF and PF counters. This code was in the IB driver, move it to the mlx4 core driver so it will be accessible for more use cases. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_core: Allocate default counter per portEran Ben Elisha2015-06-155-4/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Default counter per port will be allocated at the mlx4 core driver load. Every QP opened by the Ethernet driver will be attached to the port's default counter. This is an infrastructure step to collect VF statistics from the PF. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_core: Add port attribute when tracking countersEran Ben Elisha2015-06-151-3/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Counter will get its port attribute within the resource tracker when the first QP attached to it is modified to RTR. If a QP is counter-less, an attempt to create a new counter with assigned port will be made. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_core: Adjust counter grant policy in the resource trackerEran Ben Elisha2015-06-151-4/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each physical function has a guarantee of two counters per port, one for a default counter and one for the IB driver. Each virtual function has a guarantee of one counter per port. All other counters are free and can be obtained on demand. This is a preparation step for supporting a get_vf_stats ndo call, so we can promise a counter for every VF in order to collect their statistics from the PF context. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_core: Remove counters table allocation from VF flowEran Ben Elisha2015-06-151-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since virtual functions get their counters indices allocation from the PF, allocate counters indices bitmap only in case the function isn't virtual. Also, check that the device has counters to allocate before creating the indices bitmap table. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_core: Add sink counterEran Ben Elisha2015-06-152-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reserve the last valid counter index for "sink" counter, when a new counter cannot be allocated, the driver will use this counter. In order to avoid allocating this counter on any other flow, fix the indices bitmap allocation range, and reserve the sink counter index. Add macro for the sink counter index and replace all appearences of the index with the macro. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_core: Reset counters data when freedEran Ben Elisha2015-06-152-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add resetting the counter data to the free counter flow, so the counter's data won't be accessible anymore if querying the counter. Also, on next counter allocation (to another VM for example), it will be fresh and clear. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_core: Check before cleaning counters bitmapEran Ben Elisha2015-06-151-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If counters are not supported by the device. The indices bitmap table is not allocated during initialization. Add the symmetrical check before cleaning the counters bitmap table or freeing a counter. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Add transport domain to the ethernet TIRs/TISsAchiad Shochat2015-06-112-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate and use transport domain by the Ethernet driver code. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Add transport domain alloc/dealloc supportAchiad Shochat2015-06-112-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each transport object, namely TIR and TIS, must have a transport domain number (TDN) identifier. The driver wrongly assumed that it is OK to use TDN=0 without explicit TDN allocation from the device. The TDN will also be used for isolating different processes once user mode Ethernet will be supported. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Support NETIF_F_SGSaeed Mahameed2015-06-113-24/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When NETIF_F_SG is set, each send WQE may have a different size since each skb can have different number of fragments as of LSO header etc. This implies that a given WQE may wrap around the send queue, i.e begin at its end and continue at its start. While it is legal by the device spec, we preferred a solution that avoids it - when building of current WQE is done, if the next WQE may wrap around the send queue, fill the send queue with NOPs WQEs till its end, so that the next WQE will begin at send queue start. NOP WQE for itself cannot wrap around the send queue since it is of minimal size - 64 bytes, and all send WQEs are a multiple of that size. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Enforce max flow-tables level >= 3Gal Pressman2015-06-111-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ethernet driver requires at least 3 flow table levels to operate, enforce that. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Disable client vlan TX accelerationSaeed Mahameed2015-06-112-22/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to resolve a HW configuration issue for enabling HW CVLAN insertion. Meanwhile, no need to implement the VLAN insertion in the driver, rather use the generic kernel VLAN insertion method. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Add HW cacheline start paddingSaeed Mahameed2015-06-112-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable HW cacheline start padding and align RX WQE size to cacheline while considering HW start padding. Also, fix dma_unmap call to use the correct SKB data buffer size. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5e: Fix HW MTU settingsSaeed Mahameed2015-06-113-50/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we configured HW MTU to be netdev->mtu, actually we need to configure netdev->mtu + (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN). Also, query MTU can not fail, hence make the relevant helper a void functionm, add mlx5e_set_dev_port_mtu, helper function to handle MTU setting. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: fix an error codeDan Carpenter2015-06-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We return success if mlx5e_alloc_sq_db() fails but we should return an error code. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4_core: use swap() in mlx4_make_profile()Fabian Frederick2015-06-111-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx4: use swap() in mlx4_init_qp_table()Fabian Frederick2015-06-111-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Fix static checker warnings around system guid query flowMajd Dibbiny2015-06-072-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix static checker warnings in the flow of system guid query. Fixes: 707c4602cda6 ('net/mlx5_core: Add new query HCA vport commands') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | mlx5: Enable mutual support for IB and EthernetHaggai Abramonvsky2015-06-042-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ethernet functionality is only available when working in ISSI > 0 mode. Previously, the IB driver wasn't ready to work on that mode, and hence building both the IB driver and the Ethernet functionality in the core driver were disallowed by Kconfigs. Now, once we have all the pre-steps in place, we can remove this limitation. The last steps in the IB driver for getting that setup to work are: create dummy SRQ for the driver's use (until now we could use XRC_SRQ as SRQ and XRC_SRQ, after moving to ISSI > 0, we separate XRC SRQs from basic SRQs) and adapt the create QP function to be compatible with ISSI > 0. Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Add more query port helpersMajd Dibbiny2015-06-041-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the following helpers: 1. mlx5_query_port_proto_oper -- queries the port speed port mask 2. mlx5_query_port_link_width_oper - queries the port link with bitmask 3. mlx5_query_port_vl_hw_cap - queries the Virtual Lanes supported on this port These helpers will be used from the IB driver when working in ISSI > 0 mode. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Use port number when querying port ptysMajd Dibbiny2015-06-042-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now, mlx5_query_port_ptys always queried port number one. Added new argument in the function's prototype so we can also query the second port. This will be needed when thr helper will be invoked from the IB driver on non FPP (Function-Per-Port) devices. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Use port number in the query port mtu helpersMajd Dibbiny2015-06-042-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the function prototypes for max and operational mtu to take the local port number. In the Ethernet driver is this hard coded to one, since ConnectX4 Ethernet devices are always function-per-port. The IB driver also serves older devices (ConnectIB) which isn't such, and hence the part can vary. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Get vendor-id using the query adapter commandMajd Dibbiny2015-06-043-18/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add two wrapper functions to the query adapter command: 1. mlx5_query_board_id -- replaces the old mlx5_cmd_query_adapter. 2. mlx5_core_query_vendor_id -- retrieves the vendor_id from the query_adapter command. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Add new query HCA vport commandsMajd Dibbiny2015-06-043-11/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the implementation for the following commands: 1. QUERY_HCA_VPORT_GID 2. QUERY_HCA_VPORT_PKEY 3. QUERY_HCA_VPORT_CONTEXT They will be needed when we move to work with ISSI > 0 in the IB driver too. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Make the vport helpers available for the IB driver tooMajd Dibbiny2015-06-044-45/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the vport header file to be under include/linux/mlx5, such that the mlx5 IB can use it as well. Also add nic_ prefix to the vport NIC commands to differeniate between HCA vport commands and NIC vport commands. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Check the return bitmask when querying ISSIHaggai Abramonvsky2015-06-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The determination of the supported ISSI versions should be conditioned on the returned mask, and not only on the return status of the query ISSI command, fix that. Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Enable XRCs and SRQs when using ISSI > 0Haggai Abramonvsky2015-06-044-65/+548
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When working in ISSI > 0 mode, the model exposed by the device for XRCs and SRQs is different. XRCs use XRC SRQs and plain SRQs are based on RPM (Receive Memory Pool). Add helper functions to create, modify, query, and arm XRC SRQs and RMPs. Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5_core: Apply proper name convention to helpersHaggai Abramonvsky2015-06-043-30/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some core helper functions were named with mlx5_ only prefix, fix that to mlx5_core_ so we're aligned with the overall scheme used for core services. Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud