summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/freescale
Commit message (Collapse)AuthorAgeFilesLines
...
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-08-134-343/+8
|\ \ | |/ | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/cavium/Kconfig The cavium conflict was overlapping dependency changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * gianfar: remove faulty filer optimizerJakub Kicinski2015-08-121-337/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current filer rule optimization is broken in several ways: (1) Can perform reads/writes beyond end of allocated tables. (gianfar_ethtool.c:1326). (2) It breaks badly for rules with more than 2 specifiers (e.g. matching ip, port, tos). Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 tos 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 tos 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 tos 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: TOS == 00000003 AND Q:00 ctrl:0000008a prop:00000003 05: DIA == 0a000003 AND Q:11 ctrl:0000448c prop:0a000003 06: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 07: TOS == 00000002 AND Q:00 ctrl:0000008a prop:00000002 08: DIA == 0a000002 AND Q:09 ctrl:0000248c prop:0a000002 09: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 0a: DPT == 00000001 AND Q:00 ctrl:0000008e prop:00000001 0b: TOS == 00000001 CLE Q:01 ctrl:0000060a prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 (Entire cluster gets AND-ed together). (3) We observed that the masking rules it generates do not play well with clustering on P2020. Only first rule of the cluster would ever fire. Given that optimizer relies heavily on masking this is very hard to fix. Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: DIA == 0a000003 Q:11 ctrl:0000440c prop:0a000003 05: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 06: DIA == 0a000002 Q:09 ctrl:0000240c prop:0a000002 07: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 08: DPT == 00000001 CLE Q:01 ctrl:0000060e prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 Which looks correct according to the spec but only the first (eth id 252)/last added rule for 10.0.0.3 will ever trigger. As if filer did not treat the AND CLE as cluster start but also kept AND-ing the rules. We found no errata covering this. The fact that nobody noticed (2) or (3) makes me think that this feature is not very widely used and we should just remove it. Reported-by: Aleksander Dutkowski <adutkowski@gmail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gianfar: correct list membership accountingJakub Kicinski2015-08-121-1/+2
| | | | | | | | | | | | | | | | At a cost of one line let's make sure .count is correct when calling gfar_process_filer_changes(). Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gianfar: correct filer table writingJakub Kicinski2015-08-121-3/+2
| | | | | | | | | | | | | | | | | | MAX_FILER_IDX is the last usable index. Using less-than will already guarantee that one entry for catch-all rule will be left, no need to subtract 1 here. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fs_enet: mask interrupts for TX partial frames.LEROY Christophe2015-08-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | We are not interested in interrupts for partially transmitted frames. Unlike SCC and FCC, the FEC doesn't handle the I bit in buffer descriptors, instead it defines two interrupt bits, TXB and TXF. We have to mask TXB in order to only get interrupts once the frame is fully transmitted. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fs_enet: explicitly remove I flag on TX partial framesLEROY Christophe2015-08-111-1/+2
| | | | | | | | | | | | | | | | | | We are not interested in interrupts for partially transmitted frames, we have to clear BD_ENET_TX_INTR explicitly otherwise it may remain from a previously used descriptor. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fec: fix initial runtime PM refcountLucas Stach2015-08-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clocks are initially active and thus the device is marked active. This still keeps the PM refcount at 0, the pm_runtime_put_autosuspend() call at the end of probe then leaves us with an invalid refcount of -1, which in turn leads to the device staying in suspended state even though netdev open had been called. Fix this by initializing the refcount to be coherent with the initial device status. Fixes: 8fff755e9f8 (net: fec: Ensure clocks are enabled while using mdio bus) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: fec: Remove unneeded use of IS_ERR_VALUE() macroFabio Estevam2015-08-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to use the IS_ERR_VALUE() macro for checking the return value from pm_runtime_* functions. Just do a simple negative test instead. The semantic patch that makes this change is available in scripts/coccinelle/api/pm_runtime.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: fec: fix the race between xmit and bdp reclaiming pathKevin Hao2015-08-101-15/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we transmit a fragmented skb, we may run into a race like the following scenario (assume txq->cur_tx is next to txq->dirty_tx): cpu 0 cpu 1 fec_enet_txq_submit_skb reserve a bdp for the first fragment fec_enet_txq_submit_frag_skb update the bdp for the other fragment update txq->cur_tx fec_enet_tx_queue bdp = fec_enet_get_nextdesc(txq->dirty_tx, fep, queue_id); This bdp is the bdp reserved for the first segment. Given that this bdp BD_ENET_TX_READY bit is not set and txq->cur_tx is already pointed to a bdp beyond this one. We think this is a completed bdp and try to reclaim it. update the bdp for the first segment update txq->cur_tx So we shouldn't update the txq->cur_tx until all the update to the bdps used for fragments are performed. Also add the corresponding memory barrier to guarantee that the update to the bdps, dirty_tx and cur_tx performed in the proper order. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-07-316-97/+124
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/s390/net/bpf_jit_comp.c drivers/net/ethernet/ti/netcp_ethss.c net/bridge/br_multicast.c net/ipv4/ip_fragment.c All four conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * gianfar: Enable device wakeup when appropriateClaudiu Manoil2015-07-313-13/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The wol_en flag is 0 by default anyway, and we have the following inconsistency: a MAGIC packet wol capable eth interface is registered as a wake-up source but unable to wake-up the system as wol_en is 0 (wake-on flag set to 'd'). Calling set_wakeup_enable() at netdev open is just redundant because wol_en is 0 by default. Let only ethtool call set_wakeup_enable() for now. The bflock is obviously obsoleted, its utility has been corroded over time. The bitfield flags used today in gianfar are accessed only on the init/ config path, with no real possibility of concurrency - nothing that would justify smth. like bflock. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gianfar: Fix suspend/resume for wol magic packetClaudiu Manoil2015-07-311-68/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we disable NAPI in the first place we can mask the device's interrupts (and halt it) without fearing that imask may be concurrently accessed from interrupt context, so there's no need to do local_irq_save() around gfar_halt_nodisable(). lock_rx_qs()/unlock_tx_qs() are just obsoleted and potentially buggy routines. The txlock is currently used in the driver only to manage TX congestion, it has nothing to do with halting the device. With these changes, the TX processing is stopped before gfar_halt(). Compact gfar_halt() is used instead of gfar_halt_nodisable(), as it disables Rx/TX DMA h/w blocks and the Rx/TX h/w queues. gfar_start() re-enables all these blocks on resume. Enabling the magic-packet mode remains the same, note that the RX block is re-enabled just before entering sleep mode. Add IRQF_NO_SUSPEND flag for the error interrupt line, to signal that the interrupt line must remain active during sleep in order to wake the system by magic packet (MAG) reception interrupt. (On some systems the MAG interrupt did trigger w/o this flag as well, but on others it didn't.) Without these fixes, when suspended during fair Tx traffic the interface occasionally failed to be woken up by magic packet. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gianfar: Fix warning when CONFIG_PM offClaudiu Manoil2015-07-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC drivers/net/ethernet/freescale/gianfar.o drivers/net/ethernet/freescale/gianfar.c:568:13: warning: 'lock_tx_qs' defined but not used [-Wunused-function] static void lock_tx_qs(struct gfar_private *priv) ^ drivers/net/ethernet/freescale/gianfar.c:576:13: warning: 'unlock_tx_qs' defined but not used [-Wunused-function] static void unlock_tx_qs(struct gfar_private *priv) ^ Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fec: Ensure clocks are enabled while using mdio busAndrew Lunn2015-07-271-13/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a switch is attached to the mdio bus, the mdio bus can be used while the interface is not open. If the IPG clock is not enabled, MDIO reads/writes will simply time out. Add support for runtime PM to control this clock. Enable/disable this clock using runtime PM, with open()/close() and mdio read()/write() function triggering runtime PM operations. Since PM is optional, the IPG clock is enabled at probe and is no longer modified by fec_enet_clk_enable(), thus if PM is not enabled in the kernel, it is guaranteed the clock is running when MDIO operations are performed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Cc: tyler.baker@linaro.org Cc: fabio.estevam@freescale.com Cc: shawn.guo@linaro.org Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fec: introduce fec_ptp_stop and use in probe fail pathLucas Stach2015-07-263-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | This function frees resources and cancels delayed work item that have been initialized in fec_ptp_init(). Use this to do proper error handling if something goes wrong in probe function after fec_ptp_init has been called. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fec: use managed DMA API functions to allocate BD ringLucas Stach2015-07-261-2/+2
| | | | | | | | | | | | | | | | | | So it gets freed when the device is going away. This fixes a DMA memory leak on driver probe() fail and driver remove(). Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Fix warnings when built on 64-bitScott Wood2015-07-292-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of defconfig consolidation using fragments, we'd like to be able to have the same drivers enabled on 32-bit and 64-bit. Gianfar happens to only exist on 32-bit systems, and when building the resulting 64-bit kernel warnings were produced. A couple of the warnings are trivial, but the rfbptr code has deeper issues. It uses the virtual address as the DMA address, which again, happens to work in the environments where this driver is currently used, but is not the right thing to do. Fixes: 45b679c9a3cc ("gianfar: Implement PAUSE frame generation support") Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-07-231-75/+13
|\ \ | |/ | | | | | | | | | | | | | | | | Conflicts: net/bridge/br_mdb.c br_mdb.c conflict was a function call being removed to fix a bug in 'net' but whose signature was changed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Revert "net: fec: Ensure clocks are enabled while using mdio bus"Fabio Estevam2015-07-151-75/+13
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 6c3e921b18edca290099adfddde8a50236bf2d80. commit 6c3e921b18ed ("net: fec: Ensure clocks are enabled while using mdio bus") prevents the kernel to boot on mx6 boards, so let's revert it. Reported-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | freescale: remove incorrect copied commentJacob Keller2015-07-171-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The comment in question is word-for-word copied from ixgbe, and clearly has no meaning in freescale's driver. (it even says 'return an error' when the code clearly does not). Remove the comment as it is obviously incorrect and not applicable to the code as it is today. CC: Pantelis Antoniou <pantelis.antoniou@gmail.com> CC: Vitaly Bordug <vbordug@ru.mvista.com> CC: <linuxppc-dev@lists.ozlabs.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | gianfar: Add paged allocation and Rx S/GClaudiu Manoil2015-07-153-144/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The eTSEC h/w is capable of scatter/gather on the receive side too if MAXFRM > MRBLR, when the allowed maximum Rx frame size is set to be greater than the maximum Rx buffer size (MRBLR). It's about time the driver makes use of this h/w capability, by supporting fixed buffer sizes and Rx S/G. The buffer size given to eTSEC for reception is fixed to 1536B (must be multiple of 64), which is the same default buffer size as before, used to accommodate standard MTU (1500B) size frames. As before, eTSEC can receive frames of up to 9600B. Individual Rx buffers are mapped to page halves (page size for eTSEC systems is 4KB). The skb is built around the first buffer of a frame (using build_skb()). In case the frame spans multiple buffers, the trailing buffers are added as Rx fragments to the skb. The last buffer in frame is marked by the L status flag. A mechanism is in place to reuse the pages owned by the driver (for Rx) for subsequent receptions. Supporting fixed size buffers allows the implementation of Rx S/G, which in turn removes the memory pressure issues the driver had before when MTU was set for jumbo frame reception. Also, in most cases, the Rx path becomes faster due to Rx page reusal, since the overhead of allocating new rx buffers is removed from the fast path. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Use ndev, more Rx path cleanupClaudiu Manoil2015-07-152-32/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | Use "ndev" instead of "dev", as the rx queue back pointer to a net_device struct, to avoid name clashing with a "struct device" reference. This prepares the addition of a "struct device" back pointer to the rx queue structure. Remove duplicated rxq registration in the process. Move napi_gro_receive() outside gfar_process_frame(). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Fix and cleanup rxbd status handlingClaudiu Manoil2015-07-151-16/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several (long standing) problems about how the status field of the rx buffer descriptor (rxbd) is currently handled on the error path: - too many unnecessary 16bit reads of the two halves of the rxbd status field (32bit), also resulting in overuse of endianness convesion macros; - "bdp->status = RXBD_LARGE" makes no sense, since the "large" flag is read only (only eTSEC can write it), and trying to clear the other status bits is also error prone in this context (most of the rx status bits are read only anyway). This is fixed with a single 32bit read of the "status" field, and then the appropriate 16bit shifting is applied to access the various status bits or the rx frame length. Also corrected the use of the RXBD_LARGE flag. Additional fix: "rx_over_errors" stat is incremented instead of "rx_crc_errors" in case of RXBD_OVERRUN occurrence. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Bundle Rx allocation, cleanupClaudiu Manoil2015-07-153-107/+136
|/ | | | | | | | | | | | | | | | Use a more common consumer/ producer index design to improve rx buffer allocation. Instead of allocating a single new buffer (skb) on each iteration, bundle the allocation of several rx buffers at a time. This also opens the path for further memory optimizations. Remove useless check of rxq->rfbptr, since this patch touches rx pause frame handling code as well. rxq->rfbptr is always initialized as part of Rx BD ring init. Remove redundant (and misleading) 'amount_pull' parameter. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fec: Ensure clocks are enabled while using mdio busAndrew Lunn2015-07-081-13/+75
| | | | | | | | | | | | | | | | | When a switch is attached to the mdio bus, the mdio bus can be used while the interface is not open. If the IPG clock is not enabled, MDIO reads/writes will simply time out. Add support for runtime PM to control this clock. Enable/disable this clock using runtime PM, with open()/close() and mdio read()/write() function triggering runtime PM operations. Since PM is optional, the IPG clock is enabled at probe and is no longer modified by fec_enet_clk_enable(), thus if PM is not enabled in the kernel, it is guaranteed the clock is running when MDIO operations are performed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fec: don't access RACC register when not availableGreg Ungerer2015-06-282-13/+19
| | | | | | | | | | | | | | | | | | Not all silicon implementations of the Freescale FEC hardware module have the RACC (Receive Accelerator Function) register, so we should not be trying to access it on those that don't. Currently none of the ColdFire based parts with a FEC have it. Support for RACC was introduced by commit 4c09eed9 ("net: fec: Enable imx6 enet checksum acceleration"). A fix was introduced in commit d1391930 ("net: fec: Fix build for MCF5272") that disables its use on the ColdFire M5272 part, but it doesn't fix the general case of other ColdFire parts. To fix we create a quirk flag, FEC_QUIRK_HAS_RACC, and check it before working with the RACC register. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/fsl: remove dependency FSL_SOC for GianfarAlison Wang2015-06-251-2/+2
| | | | | | | | CONFIG_GIANFAR is not depended on FSL_SOC, it can be built on non-PPC platforms. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-06-241-3/+23
|\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/mellanox/mlx4/main.c net/packet/af_packet.c Both conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fs_enet: Fix NETIF_F_SG feature for Freescale MPC5121Alexander Popov2015-06-231-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4fc9b87bae25 ("net: fs_enet: Implement NETIF_F_SG feature") brings a trouble to Freescale MPC512x: a kernel oops happens during sending non-linear sk_buff with .data not aligned by 4. Log quotation: Unable to handle kernel paging request for data at address 0xe467c000 Faulting instruction address: 0xc000cd44 Oops: Kernel access of bad area, sig: 11 [#1] MPC512x generic Modules linked in: CPU: 0 PID: 984 Comm: kworker/0:1H Not tainted 4.1.0-rc8-00024-gbb16140 #2 Workqueue: rpciod rpc_async_schedule task: cf364a50 ti: cf362000 task.ti: cf362000 NIP: c000cd44 LR: c000c720 CTR: 00000206 REGS: cf363ac0 TRAP: 0300 Not tainted (4.1.0-rc8-00024-gbb16140) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 42004082 XER: 00000000 DAR: e467c000 DSISR: 20000000 GPR00: c0279e24 cf363b70 cf364a50 e467c000 00000206 0000001f 00000001 00000001 GPR08: 00000000 e467c000 e46800be 000139a6 82002082 00000000 c002e46c cf3c3680 GPR16: c044cb30 c04b0000 cf363c48 00000000 00000001 fde0315c 00000000 0000000b GPR24: 0000002c 000040be cf339aa0 0000000b 00000001 cf873210 00282f85 00000000 NIP [c000cd44] clean_dcache_range+0x1c/0x30 LR [c000c720] dma_direct_map_page+0x40/0x94 Call Trace: [cf363b70] [cf339b60] 0xcf339b60 (unreliable) [cf363b90] [c0279e24] fs_enet_start_xmit+0x1c8/0x42c [cf363bd0] [c02ff710] dev_hard_start_xmit+0x2dc/0x3d4 [cf363c40] [c0319c60] sch_direct_xmit+0xcc/0x1cc [cf363c70] [c02ff9c0] __dev_queue_xmit+0x1b8/0x47c [cf363ca0] [c032a3e8] ip_finish_output+0x1fc/0x9a8 [cf363ce0] [c032c31c] ip_send_skb+0x1c/0xa4 [cf363cf0] [c035112c] udp_send_skb+0xe4/0x2e8 [cf363d10] [c0351368] udp_push_pending_frames+0x38/0x84 [cf363d20] [c03537b8] udp_sendpage+0x134/0x174 [cf363d70] [c0384fd4] xs_sendpages+0x21c/0x250 [cf363db0] [c03852bc] xs_udp_send_request+0x50/0xf8 [cf363de0] [c0382f08] xprt_transmit+0x64/0x280 [cf363e20] [c038017c] call_transmit+0x168/0x234 [cf363e40] [c0387918] __rpc_execute+0x88/0x2b0 [cf363e80] [c00296f8] process_one_work+0x124/0x2fc [cf363ea0] [c0029a00] worker_thread+0x130/0x480 [cf363ef0] [c002e528] kthread+0xbc/0xd0 [cf363f40] [c000e4a8] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 7c70faa6 60630800 7c70fba6 4c00012c 4e800020 38a0001f 7c632878 7c832050 7c842a14 5484d97f 4d820020 7c8903a6 <7c00186c> 38630020 4200fff8 7c0004ac ---[ end trace c846c1eceb513c85 ]--- The reason: MPC5121 FEC requires 4-byte alignment for TX data buffer and calls tx_skb_align_workaround() for copying sk_buff with not aligned .data to a new sk_buff with aligned one. But tx_skb_align_workaround() uses skb_copy_from_linear_data() which doesn't work for non-linear sk_buff: a new sk_buff has non-zero nr_frags and zero .data_len. So improve the condition of calling tx_skb_align_workaround() and use skb_linearize() in it. Signed-off-by: Alexander Popov <alex.popov@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: fec: init MAC prior to mii bus probeNimrod Andy2015-06-231-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Below case causes mii bus probe failed: ifconfig eth0 down -> suspend/resume with Mega/fax mix off -> ifconfig eth0 up In i.MX6SX/i.MX7D chip, Mega/fast mix off feature is supported that means most of SOC power will be off including ENET MAC for power saving. Once ENET MAC power off, all initialized MAC registers reset to default, so in the case, it must init MAC prior to mii bus probe. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker2015-06-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: fs_enet: use swap() in fs_enet_rx_napi()Fabian Frederick2015-06-111-5/+2
| | | | | | | | | | | | | | | | | | Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: fec: ptp: correct the ENET_ATCOR valueFugang Duan2015-06-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current driver adjust freq formula is: fe * diff = ppb * pc Note: fe: ENET ref clock frequency in Hz diff = inc_corr - inc: difference between default increment and correction increment ppb: parts per billion adjustment from base pc: correction period (in number of fe clock cycles) The correction increment will be used after N cycles of regular increments, not every N cycles (with N being the correction period). For example, set ENET_ATCOR=4, INC=8, INC_CORR=9, there will be 4 increments of 8 (ENET_ATINC[INC]) , followed by 1 increment of 9 (ENET_ATINC[INC_CORR]). So, the correct formula is: fe * diff = ppb * (pc + 1) For ENET_ATCOR, a value 0 disables the correction counter and no corrections occur. So base on the origin formula, set pc = pc > 1 ? pc - 1 : pc. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: fec: add support of ethtool get_regsPhilippe Reynes2015-05-111-0/+78
| | | | | | | | | | | | | | | | This enables the ethtool's "-d" and "--register-dump" options for fec devices. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Enable changing mac addr when if upClaudiu Manoil2015-05-091-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Use device flag IFF_LIVE_ADDR_CHANGE to signal that the device supports changing the hardware address when the device is running. This allows eth_mac_addr() to change the mac address also when the network device's interface is open. This capability is required by certain applications, like bonding mode 6 (Adaptive Load Balancing). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Move TxFIFO underrun handling to reset pathClaudiu Manoil2015-05-091-30/+10
|/ | | | | | | | | | | | | | | | | | | | | | Handle TxFIFO underrun exceptions outside the fast path. A controller reset is more reliable in this exceptional case, as opposed to re-enabling on-the-fly the Tx DMA. As the controller reset is handled outside the fast path by the reset_gfar() workqueue handler, the locking scheme on the Tx path is significantly simplified. Because the Tx processing (xmit queues and tx napi) is disabled during controller reset, tstat access from xmit does not require locking. So the scope of the txlock on the processing path is now reduced to num_txbdfree, which is shared only between process context (xmit) and softirq (clean_tx_ring). As a result, the txlock must not guard against interrupt context, and the spin_lock_irqsave() from xmit can be replaced by spin_lock_bh(). Likewise, the locking has been downgraded for clean_tx_ring(). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fec: Fix RGMII-ID modeMarkus Pargmann2015-04-301-1/+4
| | | | | | | | | | | RGMII-ID uses an internal delay within the transmitter or receiver. This feature is phy specific. The rest of the communication is normal RGMII. So the fec driver has to check for all RGMII modes, not only 'PHY_INTERFACE_MODE_RGMII'. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-04-022-3/+30
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fec: setup right value for mdio hold timeUwe Kleine-König2015-03-291-3/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | The FEC modules used on i.MX28 and newer have a register to tune the MDIO output hold time that should be at least 10 ns. Up to now this value was not explicitly set and so resulted in less hold time if the fec clock was faster than 100 MHz. This was noticed on an i.MX28 machine that uses an input clock of ~150 Mhz which resulted in unreliable communication with a Marvell switch. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ucc_geth: Intialize link state to down before register_netdevCliff Clark2015-03-241-0/+3
| | | | | | | | | | | | | | | | | | ucc_geth was indicating link up after a port is administratively enabled even when nothing is plugged in. This causes user-space tools to see a spurious link up the first time after boot. Signed-off-by: Cliff Clark <cliff_clark@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ptp: fec: use helpers for converting ns to timespec.Richard Cochran2015-03-311-5/+2
| | | | | | | | | | | | | | | | | | | | This patch changes the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ptp: gianfar: use helpers for converting ns to timespec.Richard Cochran2015-03-311-5/+3
| | | | | | | | | | | | | | | | This patch changes the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ptp: gianfar: convert to the 64 bit get/set time methods.Richard Cochran2015-03-311-6/+7
| | | | | | | | | | | | | | | | The device features a 64 bit nanoseconds register, and so with this patch the driver is ready for the year 2038. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ptp: fec: convert to the 64 bit get/set time methods.Richard Cochran2015-03-311-4/+4
| | | | | | | | | | | | | | | | | | | | This driver's clock is implemented using a timecounter, and so with this patch the driver is ready for the year 2038. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-201-25/+12
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Revert "net: fec: fix the warning found by dma debug"Fabio Estevam2015-03-131-23/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 2b995f63987013bacde99168218f9c7b252bdcf1. Панов Андрей reported the following regression: "Commit 2b995f63987013bacde99168218f9c7b252bdcf1 in 4.0.0-rc3 introduces a nasty bug in transmit, corrupting packets. To reproduce: $ dd if=/dev/zero of=zeros bs=1M count=20 $ md5sum -b zeros 8f4e33f3dc3e414ff94e5fb6905cba8c *zeros This checksum is correct. Copy file "zeros" to another host with NFS, and it gets corrupted, checksum is changed. File should be big, small amounts of transmit isn't affected. I use an i.MX6 Quad board. If this commit is reverted, all works fine." Reported-by: Панов Андрей <rockford@yandex.ru> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fec: fix receive VLAN CTAG HW acceleration issueNimrod Andy2015-03-101-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current driver support receive VLAN CTAG HW acceleration feature (NETIF_F_HW_VLAN_CTAG_RX) through software simulation. There calls the api .skb_copy_to_linear_data_offset() to skip the VLAN tag, but there have overlap between the two memory data point range. The patch just fix the issue. V2: Michael Grzeschik suggest to use memmove() instead of skb_copy_to_linear_data_offset(). Reported-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Fixes: 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance") Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/fsl: constify of_device_id arrayFabian Frederick2015-03-1710-12/+12
| | | | | | | | | | | | | | | | of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/fsl: modify xgmac_mdio for little endian SoCsShaohui Xie2015-03-161-28/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | MDIO controller on little endian Socs, e.g. ls2085a is similar to the controller on big endian Socs, but the MDIO access is little endian, we use I/O accessor function to handle endianness, so the driver can run on little endian Socs. A property "little-endian" is used in DTS to indicate the MDIO is little endian, if driver probes the property, driver will access MDIO in little endian, otherwise, driver works in big endian by default. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/fsl: fix a bug in xgmac_mdioShaohui Xie2015-03-161-1/+1
| | | | | | | | | | | | | | | | There is a bug in xgmac_wait_until_done() which mdio_stat should be used instead of mdio_data when checking if busy bit is cleared. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud