summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cavium/liquidio
Commit message (Collapse)AuthorAgeFilesLines
* liquidio: Simplified napi pollIntiyaz Basha2018-03-163-66/+35
| | | | | | | | | | | | 1) Moved interrupt enable related code from octeon_process_droq_poll_cmd() to separate function octeon_enable_irq(). 2) Removed wrapper function octeon_process_droq_poll_cmd(), and directlyi using octeon_droq_process_poll_pkts(). 3) Removed unused macros POLL_EVENT_XXX. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* liquidio: Add support for liquidio 10GBase-T NICVeerasenareddy Burru2018-03-142-8/+28
| | | | | | | | | | Added ethtool changes to show port type as TP (Twisted Pair) for 10GBASE-T ports. Same driver and firmware works for liquidio NIC with SFP+ ports or TP ports. Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* liquidio: fix ndo_change_mtu to always return correct status to the callerVeerasenareddy Burru2018-03-125-113/+141
| | | | | | | | | | | | | | In a scenario where the command queued to firmware get dropped or times out, MTU change from host will not propagate to firmware. So, it is required for host driver to wait for response from firmware or timeout and then return correct status to caller of ndo_change_mtu. Also moved the common code for MTU change from PF and VF driver files to common file lio_core.c Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* liquidio: avoid doing useless workPrasad Kanneganti2018-03-082-2/+9
| | | | | | | | | Avoid doing useless work by making sure that the response_list is not empty before scheduling work to process it. Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* liquidio: Resolved mbox read issue while reading more than one 64bit dataIntiyaz Basha2018-03-081-2/+3
| | | | | | | | | Corrected length check when data received in the mbox is more than one 64 bit data value Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* liquidio: Corrected Rx bytes countingIntiyaz Basha2018-03-051-1/+2
| | | | | | | | | Corrected stats mismatch between Host Tx and its peer Rx stats Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* liquidio: Use zeroing memory allocator than allocator/memsetHimanshu Jha2018-01-021-5/+2
| | | | | | | | | | | | | Use vzalloc for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* liquidio: fix incorrect indentation of assignment statementColin Ian King2017-12-031-1/+1
| | | | | | | Remove one extraneous level of indentation on assignment statement. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'akpm' (patches from Andrew)Linus Torvalds2017-11-151-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge updates from Andrew Morton: - a few misc bits - ocfs2 updates - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits) memory hotplug: fix comments when adding section mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP mm: simplify nodemask printing mm,oom_reaper: remove pointless kthread_run() error check mm/page_ext.c: check if page_ext is not prepared writeback: remove unused function parameter mm: do not rely on preempt_count in print_vma_addr mm, sparse: do not swamp log with huge vmemmap allocation failures mm/hmm: remove redundant variable align_end mm/list_lru.c: mark expected switch fall-through mm/shmem.c: mark expected switch fall-through mm/page_alloc.c: broken deferred calculation mm: don't warn about allocations which stall for too long fs: fuse: account fuse_inode slab memory as reclaimable mm, page_alloc: fix potential false positive in __zone_watermark_ok mm: mlock: remove lru_add_drain_all() mm, sysctl: make NUMA stats configurable shmem: convert shmem_init_inodecache() to void Unify migrate_pages and move_pages access checks mm, pagevec: rename pagevec drained field ...
| * mm: remove __GFP_COLDMel Gorman2017-11-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | liquidio: Missing error code in liquidio_init_nic_module()Dan Carpenter2017-11-141-1/+2
| | | | | | | | | | | | | | | | | | We accidentally return success if lio_vf_rep_modinit() fails instead of propogating the error code. Fixes: e20f469660ad ("liquidio: synchronize VF representor names with NIC firmware") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: do not consider packets dropped by network stack as driver Rx droppedIntiyaz Basha2017-11-051-12/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | netdev->rx_dropped was including packets dropped by napi_gro_receive. If a packet is dropped by network stack, it should not be counted under driver Rx dropped. Made necessary changes to not include network stack drops under netdev->rx_dropped. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-11-041-0/+1
|\ \ | |/ | | | | | | | | | | Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | liquidio: Fix an issue with multiple switchdev enable disablesVijaya Mohan Guvva2017-11-043-2/+9
| | | | | | | | | | | | | | | | | | | | | | Return success if the same dispatch function is being registered for a given opcode and subcode, there by allow multiple switchdev enable and disables. Signed-off-by: Vijaya Mohan Guvva <vijaya.guvva@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: bump up driver version to 1.7.0 to match newer NIC firmwareFelix Manlunas2017-11-031-2/+2
| | | | | | | | | | | | Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: synchronize VF representor names with NIC firmwareVijaya Mohan Guvva2017-11-024-1/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | LiquidIO firmware supports a vswitch that needs to know the names of the VF representors in the host to maintain compatibility for direct programming using external Openflow agents. So, for each VF representor, send its name to the firmware when it gets registered and when its name changes. Signed-off-by: Vijaya Mohan Guvva <vijaya.guvva@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: remove redundant setting of inst_processed to zeroColin Ian King2017-11-021-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The zero value assigned to inst_processed at the end of each iteration of the do-while loop is overwritten on the next iteration and hence it is a redundant assignment and can be removed. Cleans up clang warning: drivers/net/ethernet/cavium/liquidio/request_manager.c:480:3: warning: Value stored to 'inst_processed' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: Configure switchdev with devlinkVijaya Mohan Guvva2017-11-014-0/+107
| | | | | | | | | | | | | | | | | | | | | | | | Enable and disable switchdev on SRIOV capable LiquidIO NIC with devlink. Create representor netdev for each SRIOV VF function on SRIOV enable and and do the cleanup on SRIOV disable. Signed-off-by: Vijaya Mohan Guvva <vijaya.guvva@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: switchdev support for LiquidIO NICVijaya Mohan Guvva2017-11-016-1/+750
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable switchdev for SRIOV capable LiquidIO NIC. It registers a representor netdev (with switchdev_ops) for each SRIOV VF created. It also has changes to send representor interface configurations like admin state and MTU to LiquidIO firmware and to retrieve HW counted VF stats for VF representor. Signed-off-by: Vijaya Mohan Guvva <vijaya.guvva@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: get rid of false alarm "Unknown cmd 27" in dmesgFelix Manlunas2017-10-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Creating a macvtap interface with the liquidio VF driver as lower device causes this alarming message to show up in dmesg: liquidio_link_ctrl_cmd_completion Unknown cmd 27 That's actually a false alarm because cmd 27 is the value of the macro OCTNET_CMD_SET_UC_LIST which is known. It's a control command sent from host to NIC firmware to set the unicast MAC address list of the macvtap lower device. Make the false alarm go away by adding a case for OCTNET_CMD_SET_UC_LIST in liquidio_link_ctrl_cmd_completion(). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: fix kernel panic in VF driverFelix Manlunas2017-10-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Doing ifconfig down on VF driver in the middle of receiving line rate traffic causes a kernel panic: LiquidIO_VF 0000:02:00.3: should not come here should not get rx when poll mode = 0 for vf BUG: unable to handle kernel NULL pointer dereference at (null) . . . Call Trace: <IRQ> ? tasklet_action+0x102/0x120 __do_softirq+0x91/0x292 irq_exit+0xb6/0xc0 do_IRQ+0x4f/0xd0 common_interrupt+0x93/0x93 </IRQ> RIP: 0010:cpuidle_enter_state+0x142/0x2f0 RSP: 0018:ffffffffa6403e20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff59 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 000000000000001f RDX: 0000000000000000 RSI: 000000002ab7519f RDI: 0000000000000000 RBP: ffffffffa6403e58 R08: 0000000000000084 R09: 0000000000000018 R10: ffffffffa6403df0 R11: 00000000000003c7 R12: 0000000000000003 R13: ffffd27ebd806800 R14: ffffffffa64d40d8 R15: 0000007be072823f cpuidle_enter+0x17/0x20 call_cpuidle+0x23/0x40 do_idle+0x18c/0x1f0 cpu_startup_entry+0x64/0x70 rest_init+0xa5/0xb0 start_kernel+0x45e/0x46b x86_64_start_reservations+0x24/0x26 x86_64_start_kernel+0x6f/0x72 secondary_startup_64+0xa5/0xa5 Code: Bad RIP value. RIP: (null) RSP: ffff9246ed003f28 CR2: 0000000000000000 ---[ end trace 92731e80f31b7d7d ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x24000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt Reason is: in the function assigned to net_device_ops->ndo_stop, the steps for bringing down the interface are done in the wrong order. The step that notifies the NIC firmware to stop forwarding packets to host is done too late. Fix it by moving that step to the beginning. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: xmit_more supportIntiyaz Basha2017-10-289-19/+55
| | | | | | | | | | | | | | | | | | | | | | | | Defer ringing the Tx doorbell if skb->xmit_more is set unless the Tx queue is full or stopped. To keep latency low, use a deferral limit of 8 packets. We chose 8 because Octeon can fetch at most 8 packets in a single PCI read, and our tests show that 8 results in low latency. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: deprecate 1-bit flag indicating watchdog kernel thread is runningFelix Manlunas2017-10-271-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Deprecate the 1-bit flag (bit 2 in the SLI_SCRATCH_1 Octeon register) that indicates that the liquidio watchdog kernel thread is running for this NIC. Reason is: it is incompatible with the firmware's use for SLI_SCRATCH_1. In lieu of checking that now-deprecated flag, check the value of oct_dev->adapter_refcount to determine whether or not to create the watchdog kernel thread. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: pass date and time info to NIC firmwareVeerasenareddy Burru2017-10-244-3/+166
| | | | | | | | | | | | | | | | | | | | | | Pass date and time information to NIC at the time of loading firmware and periodically update the host time to NIC firmware. This is to make NIC firmware use the same time reference as Host, so that it is easy to correlate logs from firmware and host for debugging. Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-10-221-1/+1
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were quite a few overlapping sets of changes here. Daniel's bug fix for off-by-ones in the new BPF branch instructions, along with the added allowances for "data_end > ptr + x" forms collided with the metadata additions. Along with those three changes came veritifer test cases, which in their final form I tried to group together properly. If I had just trimmed GIT's conflict tags as-is, this would have split up the meta tests unnecessarily. In the socketmap code, a set of preemption disabling changes overlapped with the rename of bpf_compute_data_end() to bpf_compute_data_pointers(). Changes were made to the mv88e6060.c driver set addr method which got removed in net-next. The hyperv transport socket layer had a locking change in 'net' which overlapped with a change of socket state macro usage in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: fix timespec64_to_ns typoArnd Bergmann2017-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While experimenting with changes to the timekeeping code, I ran into a build error in the liquidio driver: drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'liquidio_ptp_settime': drivers/net/ethernet/cavium/liquidio/lio_main.c:1850:22: error: passing argument 1 of 'timespec_to_ns' from incompatible pointer type [-Werror=incompatible-pointer-types] The driver had a type mismatch since it was first merged, but this never caused problems because it is only built on 64-bit architectures that define timespec and timespec64 to the same type. If we ever want to compile-test the driver on 32-bit or change the way that 64-bit timespec64 is defined, we need to fix it, so let's just do it now. Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: mark expected switch fall-through in octeon_destroy_resourcesGustavo A. R. Silva2017-10-191-1/+1
| | | | | | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: remove unnecessary NULL check before kfree in delete_glistsGustavo A. R. Silva2017-10-191-2/+1
| | | | | | | | | | | | | | | | | | | | NULL check before freeing functions like kfree is not needed. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: update module parameter fw_type to reflect firmware type loadedRick Farrington2017-09-251-2/+4
| | | | | | | | | | | | Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: verify firmware version when auto-loaded from flash.Rick Farrington2017-09-251-1/+17
| | | | | | | | | | | | Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: allow override of firmware present in flashRick Farrington2017-09-254-26/+64
|/ | | | | | Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2017-09-0616-1430/+1576
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
| * liquidio: fix crash in presence of zeroed-out base address regsRick Farrington2017-08-301-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix crash in linux PF driver when BARs have been cleared/de-programmed; fail early init (prior to mapping BARs) if the BAR0 or BAR1 registers are zero. This situation can arise when the PF is added to a VM (PCI pass-through), then a PF FLR is issued (in the VM). After this occurs, the BAR registers will be zero. If we attempt to load the PF driver in the host (after VM has been shutdown), the host can reset. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: show NIC's U-Boot version in a dev_info() messageWeilin Chang2017-08-291-0/+78
| | | | | | | | | | | | Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: change manner of detecting whether or not NIC firmware is loadedFelix Manlunas2017-08-233-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the NIC firmware, the 1-bit flag indicating "firmware is loaded" moved from SLI_SCRATCH_1 to SLI_SCRATCH_2 (these are Octeon general-purpose scratch registers). Make the PF driver conform to this change. Remove code that sets the "firmware is loaded" flag because it's now the firmware's job to do that. In the code that detects whether or not the firmware is loaded, don't just rely on checking the "firmware is loaded" flag because that may cause a rare false negative. Add code that deduces whether or not the firmware is loaded; that will never give a false negative. Also bump up driver version to match newer NIC firmware. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: make VF driver notify NIC firmware of MTU changeVeerasenareddy Burru2017-08-221-5/+22
| | | | | | | | | | | | Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: move macro definition to a proper placeVeerasenareddy Burru2017-08-222-2/+2
| | | | | | | | | | | | | | | | | | | | The macro LIO_CMD_WAIT_TM is not specific to the PF driver; it can be used by the VF driver too, so move its definition from a PF-specific header file to one that's common to PF and VF. Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: fix use of pf in pass-through mode in a virtual machineRick Farrington2017-08-202-5/+44
| | | | | | | | | | | | | | | | | | | | | | Fix problem when PF is used in pass-through mode in a VM (w/embedded f/w). If host error reading PF num from CN23XX_PCIE_SRIOV_FDL reg, try to retrieve PF num from SLI_PKT(0)_INPUT_CONTROL (initialized by f/w). Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: remove support for deprecated f/w cmd OCTNET_CMD_RESET_PFRick Farrington2017-08-182-10/+0
| | | | | | | | | | | | Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: fix Smatch errorIntiyaz Basha2017-08-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix Smatch error by not dereferencing iq pointer if it's NULL. See http://marc.info/?l=kernel-janitors&m=150296723301129&w=2 Also, remove unnecessary parentheses. Fixes: d314ac222829 ("liquidio: moved liquidio_napi_poll to lio_core.c") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: with embedded f/w, issue droq credits before enablementRick Farrington2017-08-181-8/+12
| | | | | | | | | | | | | | | | 1. Issue credits BEFORE enabling DROQ's; this prevents PKTPF_ERR interrupt. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: with embedded f/w, don't reload f/w, issue pf flr at exitRick Farrington2017-08-181-24/+46
| | | | | | | | | | | | | | | | | | | | 1. Add support for PF FLR when exiting (enables CORE_DRV_ACTIVE upon next driver init) 2. Skip some initialization (don't try to load f/w, activate consoles). Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: fix spelling mistake: "interuupt" -> "interrupt"Colin Ian King2017-08-171-1/+1
| | | | | | | | | | | | | | Trivial fix to spelling mistake in dev_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: update VF's netdev->max_mtu if there's a change in PF's MTUVeerasenareddy Burru2017-08-162-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | A VF's MTU is capped at the parent PF's MTU. So if there's a change in the PF's MTU, then update the VF's netdev->max_mtu. Also remove duplicate log messages for MTU change. Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: added support for ethtool --set-channels featureIntiyaz Basha2017-08-156-50/+226
| | | | | | | | | | | | | | | | | | adding support for ethtool --set-channels feature Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: moved octeon_setup_interrupt to lio_core.cIntiyaz Basha2017-08-154-263/+202
| | | | | | | | | | | | | | | | | | Moving common octeon_setup_interrupt to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: moved liquidio_legacy_intr_handler to lio_core.cIntiyaz Basha2017-08-153-56/+57
| | | | | | | | | | | | | | | | | | Moving liquidio_legacy_intr_handler to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: moved liquidio_msix_intr_handler to lio_core.cIntiyaz Basha2017-08-155-88/+50
| | | | | | | | | | | | | | | | | | Moving common liquidio_msix_intr_handler to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * liquidio: fix issues with fw_type module parameterDerek Chickles2017-08-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | The fw_type module parameter isn't showing up in the /sys/module/liquidio/parameters directory. Fix it by setting the read permission bits for user, group, other in module_param_string(). Revise the description of fw_type. Initialize the fw_type static char array with the default value to conform to the module parameter description. Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud