summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
Commit message (Collapse)AuthorAgeFilesLines
* bnx2x: remove some bloatEric Dumazet2012-04-301-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before doing skb->head_frag work on bnx2x driver, I found too much stuff was inlined in bnx2x/bnx2x_cmn.h for no good reason and made my work not very easy. Move some big functions out of this include file to the respective .c file. A lot of inline keywords are not needed at all in this huge driver. text data bss dec hex filename 490083 1270 56 491409 77f91 bnx2x/bnx2x.ko.before 484206 1270 56 485532 7689c bnx2x/bnx2x.ko Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Maciej Żenczykowski <maze@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: add afex supportBarak Witkowski2012-04-231-2/+2
| | | | | | | | | | | | | | | | | | | Following patch adds afex multifunction support to the driver (afex multifunction is based on vntag header) and updates FW version used to 7.2.51. Support includes the following: 1. Configure vif parameters in firmware (default vlan, vif id, default priority, allowed priorities) according to values received from NIC. 2. Configure FW to strip/add default vlan according to afex vlan mode. 3. Notify link up to OS only after vif is fully initialized. 4. Support vif list set/get requests and configure FW accordingly. 5. Supply afex statistics upon request from NIC. 6. Special handling to L2 interface in case of FCoE vif. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: change to the rss engineDmitry Kravkov2012-04-041-5/+2
| | | | | | | | | | This patch revises the way by which rss are configured, removing an unnecessary module paramater and unrequired modes. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: remove unnecessary .h dependenciesYuval Mintz2012-04-041-3/+0
| | | | | | Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: reduced sparse warningsYuval Mintz2012-03-191-1/+1
| | | | | | | | | | This patch reduces sparse warnings in the bnx2x code, mostly by changing functions into static and changing initialization of structures. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: revised driver printsMerav Sicron2012-03-191-73/+116
| | | | | | | | | | | | | We've revised driver prints, changing the mask of existing prints to allow better control over the debug messages, added prints to error scenarios, removed unnecessary prints and corrected some spelling. Please note that this patch contains lines with over 80 characters, as string messages were kept in a single line. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: ethtool returns req. AN even when AN failsYuval Mintz2012-03-121-1/+1
| | | | | | | | | | Previously, if autoneg failed, ethtool would return the achieved autoneg. This patch corrects this, causing ethtool to return the requested autoneg capabilities even if autoneg fails. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: ethtool now returns unknown speed/duplexYuval Mintz2012-03-121-11/+18
| | | | | | | | | | | Previously, unless both interface and link were up, ethtool returned the requested speed/duplex when asked for the interface's settings. This change will now enable the driver to answer correctly (i.e., return unknown as its answer). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* use FW 7.2.16Dmitry Kravkov2012-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch integrates FW 7.2.16 HSI and implements driver part of GRO flow. FW 7.2.16 adds the ability to aggregate packets for GRO (and not just LRO) and also fixes some bugs. 1. Added new aggregation mode: GRO. In this mode packets are aggregated such that the original packets can be reconstructed by the OS. 2. 57712 HW bug workaround - initialized all CAM TM registers to 0x32. 3. Adding the FCoE statistics structures to the BNX2X HSI. 4. Wrong configuration of TX HW input buffer size may cause theoretical performance effect. Performed configuration fix. 5. FCOE - Arrival of packets beyond task IO size can lead to crash. Fix firmware data-in flow. 6. iSCSI - In rare cases of on-chip termination the graceful termination timer hangs, and the termination doesn't complete. Firmware fix to MSL timer tolerance. 7. iSCSI - Chip hangs when target sends FIN out-of-order or with isles open at the initiator side. Firmware implementation corrected to drop FIN received out-of-order or with isles still open. 8. iSCSI - Chip hangs when in case of retransmission not aligned to 4-bytes from the beginning of iSCSI PDU. Firmware implementation corrected to support arbitrary aligned retransmissions. 9. iSCSI - Arrival of target-initiated NOP-IN during intense ISCSI traffic might lead to crash. Firmware fix to relevant flow. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: allow all functions to display the phy FW versionMintz Yuval2012-02-151-8/+2
| | | | | | | | | The phy FW version is stored in regular memory, no MDC-MDIO access or any special locks are required to read it in the current implementation. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: allocate memory dynamically in ethtool self-test.Mintz Yuval2012-02-151-2/+11
| | | | | | | | | | | From: Merav Sicron <meravs@broadcom.com> Current ethtool self tests usesa large buffer on stack. This patch replaces that array by dynamically allocated memory Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: ethtool publishes link partners speed and FCMintz Yuval2012-02-151-2/+37
| | | | | | | | | | | Following the changes in the ethtool source code, this patch enables the bnx2x driver to publish the Link partner's capabilities s, when ethtool is used on an interface which completed autoneg. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Update version to 1.72.0 and copyrightsAriel Elior2012-01-261-1/+1
| | | | | | Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Recoverable and unrecoverable error statisticsAriel Elior2012-01-261-3/+9
| | | | | | | | | Add statistics for tracking parity errors from which we successfully recovered and those which were deemed unrecoverable. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Lock PF-common resourcesAriel Elior2012-01-261-2/+20
| | | | | | | | | | | | | Use hardware locks to protect resources common to several Physical Functions. In a virtualized environment the RTNL lock only protects a PF's driver against the PFs sharing it's VMs with regard to device resources. Other PFs may reside in other VMs under other OSs, and are not subject to the lock. Such resources which were previously protected implicitly by the RTNL lock must now be protected explicitly with dedicated HW locks. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fix Big-Endianess in ethtool -tDmitry Kravkov2012-01-231-3/+2
| | | | | | Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fixed ethtool statistics for MF modesYuval Mintz2012-01-231-65/+41
| | | | | | | | | Previosuly, in MF modes `ethtool -S' lacked some of the statistics which appeared in non-MF modes. This has been fixed. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Remove 100Mb force speed for BCM84833Yaniv Rosner2012-01-171-1/+6
| | | | | | | | | Remove unsupported speed of 100Mb force for BCM84833 due to hardware limitation. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: Centralise validation of ETHTOOL_{G, S}RXFHINDIR parametersBen Hutchings2011-12-161-25/+14
| | | | | | | | | | | | | Add a new ethtool operation (get_rxfh_indir_size) to get the indirectional table size. Use this to validate the user buffer size before calling get_rxfh_indir or set_rxfh_indir. Use get_rxnfc to get the number of RX rings, and validate the contents of the new indirection table before calling set_rxfh_indir. Remove this validation from drivers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fix crash while ethtool -tDmitry Kravkov2011-12-061-0/+3
| | | | | | | | | | | | | commit 2df1a70aaf70e8dff11b89b938a5f317556ee640 "bnx2x: Support for byte queue limits" has introduced an asymmetry in usage of netdev_tx_completed_queue and netdev_tx_sent_queue. Missing call to netdev_tx_sent_queue causes the crash during ethtool -t. The patch adds the missing call. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: add PFC statisticsBarak Witkowski2011-12-061-0/+4
| | | | | | | | | Add Priority flow control counters for ethtool -S. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Cosmetic changesYaniv Rosner2011-11-281-1/+1
| | | | | | | | Fix spelling, alignment, empty lines, relocate the is_4_port_mode function, and split bnx2x_link_status_update function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Fix self test of BCM57800Yaniv Rosner2011-11-281-2/+12
| | | | | | | | Fix the MAC test of the 1G port of the BCM57800 to use the UMAC instead of the XMAC. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: uses build_skb() in receive pathEric Dumazet2011-11-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bnx2x uses following formula to compute its rx_buf_sz : dev->mtu + 2*L1_CACHE_BYTES + 14 + 8 + 8 + 2 Then core network adds NET_SKB_PAD and SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) Final allocated size for skb head on x86_64 (L1_CACHE_BYTES = 64, MTU=1500) : 2112 bytes : SLUB/SLAB round this to 4096 bytes. Since skb truesize is then bigger than SK_MEM_QUANTUM, we have lot of false sharing because of mem_reclaim in UDP stack. One possible way to half truesize is to reduce the need by 64 bytes (2112 -> 2048 bytes) Instead of allocating a full cache line at the end of packet for alignment, we can use the fact that skb_shared_info sits at the end of skb->head, and we can use this room, if we convert bnx2x to new build_skb() infrastructure. skb_shared_info will be initialized after hardware finished its transfert, so we can eventually overwrite the final padding. Using build_skb() also reduces cache line misses in the driver, since we use cache hot skb instead of cold ones. Number of in-flight sk_buff structures is lower, they are recycled while still hot. Performance results : (820.000 pps on a rx UDP monothread benchmark, instead of 720.000 pps) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Eilon Greenstein <eilong@broadcom.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Tom Herbert <therbert@google.com> CC: Jamal Hadi Salim <hadi@mojatatu.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Thomas Graf <tgraf@infradead.org> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sweep the floors and convert some .get_drvinfo routines to strlcpyRick Jones2011-11-081-4/+4
| | | | | | | | | | Per the mention made by Ben Hutchings that strlcpy is now the preferred string copy routine for a .get_drvinfo routine, do a bit of floor sweeping and convert some of the as-yet unconverted ethernet drivers to it. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Enable changing speed when port type is PORT_DAYaniv Rosner2011-10-271-0/+1
| | | | | | Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove unnecessary driver assignments of ethtool_ringparam fields to zeroRick Jones2011-10-071-5/+0
| | | | | | | | | | Per comments from Ben Hutchings on a previous patch, sweep the floors a little removing unnecessary assignments of zero to fields of struct ethtool_ringparam in driver code supporting ethtool -g. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of github.com:davem330/netDavid S. Miller2011-09-221-7/+41
| | | | | | | | | | | | Conflicts: MAINTAINERS drivers/net/Kconfig drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c drivers/net/ethernet/broadcom/tg3.c drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
* ethtool: Clean up definitions of rule location arrays in RX NFCBen Hutchings2011-09-161-1/+1
| | | | | | | | | | | | | Correct the description of ethtool_rxnfc::rule_locs; it is an array of currently used locations, not all possible valid locations. Add note that drivers must not use ethtool_rxnfc::rule_locs. The rule_locs argument to ethtool_ops::get_rxnfc is either NULL or a pointer to an array of u32, so change the parameter type accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Use pr_fmt and message logging cleanupsJoe Perches2011-08-171-10/+13
| | | | | | | | | | | | Add pr_fmt(fmt) KBUILD_MODNAME ": " to prefix messages with "bnx2x: ". Remove #define DP_LEVEL and use pr_notice. Repeating KERN_<LEVEL> isn't necessary in multi-line printks. printk macro neatening, use fmt and ##__VA_ARGS__. Coalesce long formats. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* broadcom: Move the Broadcom driversJeff Kirsher2011-08-101-0/+2355
Moves the drivers for Broadcom devices into drivers/net/ethernet/broadcom/ and the necessary Kconfig and Makefile changes. CC: Eilon Greenstein <eilong@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Gary Zambrano <zambrano@broadcom.com> CC: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud