summaryrefslogtreecommitdiffstats
path: root/drivers/net/can
Commit message (Collapse)AuthorAgeFilesLines
* can: flexcan: handle state passive -> warning transitionSebastian Andrzej Siewior2014-08-211-0/+7
| | | | | | | | | | | | Once the CAN-bus is open and a packet is sent, the controller switches into the PASSIVE state. Once the BUS is closed again it goes the back err-warning. The TX error counter goes 0 -> 0x80 -> 0x7f. This patch makes sure that the user learns about this state chang (CAN_STATE_ERROR_WARNING => CAN_STATE_ERROR_PASSIVE) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Matthias Klein <matthias.klein@optimeas.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: flexcan: Disable error interrupt when bus error reporting is disabledAlexander Stein2014-08-211-0/+2
| | | | | | | | | | In case we don't have FLEXCAN_HAS_BROKEN_ERR_STATE and the user set CAN_CTRLMODE_BERR_REPORTING once it can not be unset again until reboot. So in case neither hardware nor user wants the error interrupt disable the bit. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: c_can: checking IS_ERR() instead of NULLDan Carpenter2014-08-211-1/+1
| | | | | | | | | | devm_ioremap() returns NULL on error, not an ERR_PTR(). Fixes: 33cf75656923 ('can: c_can_platform: Fix raminit, use devm_ioremap() instead of devm_ioremap_resource()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: sja1000: Validate initialization state in start methodMirza Krak2014-08-211-29/+33
| | | | | | | | | | | | | When sja1000 is not compiled as module the SJA1000 chip is only initialized during device registration on kernel boot. Should the chip get a hardware reset there is no way to reinitialize it without re- booting the Linux kernel. This patch adds a check in sja1000_start if the chip is initialized, if not we initialize it. Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine2014-08-126-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-07-301-1/+2
|\ | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * can: c_can_platform: Fix raminit, use devm_ioremap() instead of ↵George Cherian2014-07-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_ioremap_resource() The raminit register is shared register for both can0 and can1. Since commit: 32766ff net: can: Convert to use devm_ioremap_resource devm_ioremap_resource() is used to map raminit register. When using both interfaces the mapping for the can1 interface fails, leading to a non functional can interface. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | Merge tag 'linux-can-next-for-3.17-20140715' of ↵David S. Miller2014-07-152-41/+29
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://gitorious.org/linux-can/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2014-07-15 this is a pull request of 4 patches for net-next/master. Prabhakar Lad contributes a patch that converts the c_can driver to use the devm api. The remaining four patches by Nikita Edward Baruzdin improve the SJA1000 driver with loopback testing support and introduce a new testing mode presume ack, for successful transmission even if no ACK is received. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | can: sja1000: Add support for CAN_CTRLMODE_PRESUME_ACKNikita Edward Baruzdin2014-07-151-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SJA1000 has a self test mode (STM) which does not require acknowledgement for the successful message transmission. In this mode a node test is possible without any other active node on the bus. This patch adds a possibility to set STM for SJA1000 controller through specifying the corresponding CAN_CTRLMODE_PRESUME_ACK netlink flag. Signed-off-by: Nikita Edward Baruzdin <nebaruzdin@gmail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * | can: sja1000: Add support for CAN_CTRLMODE_LOOPBACKNikita Edward Baruzdin2014-07-151-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for hardware loopback in SJA1000 by utilising its self reception request (SRR) feature. Upon SRR the message is transmitted and received simultaneously, meaning you can't have hardware loopback without actually sending a message to the CAN bus in case of SJA1000. Signed-off-by: Nikita Edward Baruzdin <nebaruzdin@gmail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * | can: c_can: convert to use devm * apiLad, Prabhakar2014-07-151-33/+10
| |/ | | | | | | | | | | | | This patch uses devm_* APIs as they are device managed and make code simpler. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | net: set name_assign_type in alloc_netdev()Tom Gundersen2014-07-152-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* slcan: Port write_wakeup deadlock fix from slipTyler Hall2014-06-161-10/+27
| | | | | | | | | | | | | The commit "slip: Fix deadlock in write_wakeup" fixes a deadlock caused by a change made in both slcan and slip. This is a direct port of that fix. Signed-off-by: Tyler Hall <tylerwhall@gmail.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-06-031-0/+3
|\ | | | | | | | | | | | | | | | | | | Conflicts: include/net/inetpeer.h net/ipv6/output_core.c Changes in net were fixing bugs in code removed in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * can: only rename enabled led triggers when changing the netdev nameOliver Hartkopp2014-05-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a1ef7bd9fce8 ("can: rename LED trigger name on netdev renames") renames the led trigger names according to the changed netdevice name. As not every CAN driver supports and initializes the led triggers, checking for the CAN private datastructure with safe_candev_priv() in the notifier chain is not enough. This patch adds a check when CONFIG_CAN_LEDS is enabled and the driver does not support led triggers. For stable 3.9+ Cc: Fabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: xilinx CAN controller supportKedareswara rao Appana2014-05-263-0/+1217
| | | | | | | | | | | | | | | | This patch adds xilinx CAN controller support. This driver supports both ZYNQ CANPS and Soft IP AXI CAN controller. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-05-243-48/+9
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * can: peak_pci: prevent use after free at netdev removalStephane Grosjean2014-05-211-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As remarked by Christopher R. Baker in his post at http://marc.info/?l=linux-can&m=139707295706465&w=2 there's a possibility for an use after free condition at device removal. This simplified patch introduces an additional variable to prevent the issue. Thanks for catching this. Cc: linux-stable <stable@vger.kernel.org> Reported-by: Christopher R. Baker <cbaker@rec.ri.cmu.edu> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig optionOliver Hartkopp2014-05-192-43/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 2b9aecdce2 ("can: c_can: Disable rx split as workaround") a new Kconfig option was introduced as a workaround. The tests performed by Alexander Stein confirmed this option to be obsolete with all the other cleanups and fixes that had been discussed that time: http://marc.info/?l=linux-can&m=139746476821294&w=2 Both (author and tester) agreed to remove this Kconfig option again: http://marc.info/?l=linux-can&m=139883820714229&w=2 As some more cleanups took place since then a simple revert is not possible. This patch removes the entire option as it would behave when disabled. Further beautification’s can be done later. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: gs_usb: gs_destroy_candev(): fix use after freeMarc Kleine-Budde2014-05-211-1/+1
| | | | | | | | | | | | | | This patch fixes a use after free of "dev" in gs_destroy_candev(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: gs_usb: Added support for the GS_USB CAN devicesMaximilian Schneider2014-05-193-0/+980
| | | | | | | | | | | | | | | | | | | | The Geschwister Schneider Family of devices are galvanically isolated USB2.0 to CAN2.0A/B adapters. Currently two form factors are available, a tethered dongle in a rugged enclosure, and mini-pci-e card. Signed-off-by: Maximilian Schneider <max@schneidersoft.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: add Renesas R-Car CAN driverSergei Shtylyov2014-05-193-0/+887
| | | | | | | | | | | | | | Add support for the CAN controller found in Renesas R-Car SoCs. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: c_can: add hwinit support for non-TI devicesPavel Machek2014-05-192-4/+38
| | | | | | | | | | | | | | | | | | | | Non-TI chips (including socfpga) needs different raminit sequence. Implement it. Tested-by: Thor Thayer <tthayer@altera.com> Signed-off-by: Thor Thayer <tthayer@altera.com> Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: c_can: Add and make use of 32-bit accesses functionsPavel Machek2014-05-194-10/+60
| | | | | | | | | | | | | | | | | | | | | | Add helpers for 32-bit accesses and replace open-coded 32-bit access with calls to helpers. Minimum changes are done to the pci case, as I don't have access to that hardware. Tested-by: Thor Thayer <tthayer@altera.com> Signed-off-by: Thor Thayer <tthayer@altera.com> Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: c_can: make {read,write}_reg functions constPavel Machek2014-05-193-13/+13
| | | | | | | | | | | | | | | | | | This patch makes the {read,write}_reg functions const, this is a preparation to make use of {read,write}_reg in the hwinit callback. Signed-off-by: Thor Thayer <tthayer@altera.com> Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: pch_can: Fix Kconfig dependenciesJean Delvare2014-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The pch_can driver is for a companion chip to the Intel Atom E600 series processors. These are 32-bit x86 processors so the driver is only needed on X86_32. Add COMPILE_TEST as an alternative, so that the driver can still be build-tested elsewhere. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: mscan: Fix Kconfig dependenciesJean Delvare2014-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | The only driver based on MSCAN at the moment is for PPC machines, so it makes no sense to present the menu on M68K. The menu will always be empty there. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: at91_can: Fix Kconfig dependenciesJean Delvare2014-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | The at91_can driver is AT91-specific so it should depend on ARCH_AT91 rather than just ARM. Add COMPILE_TEST as an alternative, so that the driver can still be build-tested elsewhere. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: mcp251x: fix coccinelle warningsDan Carpenter2014-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/net/can/spi/mcp251x.c:953:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Make sure threaded IRQs without a primary handler are always request with IRQF_ONESHOT Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci CC: Stefano Babic <sbabic@denx.de> CC: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-05-128-382/+343
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * can: slcan: Fix spinlock variantAlexander Stein2014-04-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | slc_xmit is called within softirq context and locks sl->lock, but slcan_write_wakeup is not softirq context, so we need to use spin_[un]lock_bh! Detected using kernel lock debugging mechanism. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: fix return value from can_get_bittiming()Oliver Hartkopp2014-04-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When trying to set a data bitrate on non CAN FD devices the 'ip' tool answers with: RTNETLINK answers: Unknown error 524 Rename '-ENOTSUPP' to '-EOPNOTSUPP' so that 'ip' answers correctly: RTNETLINK answers: Operation not supported Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: sja1000_isa: add locking for indirect register access modeOliver Hartkopp2014-04-241-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When accessing the SJA1000 controller registers in the indirect access mode, writing the register number and reading/writing the data has to be an atomic attempt. As the sja1000_isa driver is an old style driver with a fixed number of instances the locking variable depends on the same index like all the other configuration elements given on the module command line. As a positive side effect dev->dev_id is populated by the instance index, which was missing in 3e66d0138c05d9 ("can: populate netdev::dev_id for udev discrimination"). Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can_pci: enable PCI bus master only for MSIWolfgang Grandegger2014-04-241-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Coverity complains that c_can_pci_probe() calls pci_enable_msi() without checking the result: CID 712278 (#1 of 1): Unchecked return value (CHECKED_RETURN) 3. check_return: Calling pci_enable_msi_block without checking return value (as is done elsewhere 88 out of 105 times). 88 pci_enable_msi(pdev); This is CID 712278. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Reported-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: use proper type for 'instance'Wolfram Sang2014-04-242-2/+2
| | | | | | | | | | | | | | | | | | | | Commit 6439fbce1075 (can: c_can: fix error checking of priv->instance in probe()) found the warning but applied a suboptimal solution. Since, both pdev->id and of_alias_get_id() return integers, it makes sense to convert the variable to an integer and avoid the cast. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Speed up tx buffer invalidationThomas Gleixner2014-04-242-15/+40
| | | | | | | | | | | | | | | | | | | | | | It's suffcient to kill the TXIE bit in the message control register even if the documentation of C and D CAN says that it's not allowed to do that while MSGVAL is set. Reality tells a different story and this change gives us another 2% of CPU back for not waiting on I/O. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Remove tx lockingThomas Gleixner2014-04-242-92/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark suggested to use one IF for the softirq and the other for the xmit function to avoid the xmit lock. That requires to write the frame into the interface first, then handle the echo skb and store the dlc before committing the TX request to the message ram. We use an atomic to handle the active buffers instead of reading the MSGVAL register as thats way faster especially on PCH/x86. Suggested-by: Mark <mark5@del-llc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Use proper u32 variables in c_can_write_msg_object()Thomas Gleixner2014-04-241-9/+9
| | | | | | | | | | | | | | | | | | | | Instead of obfuscating the code by artificial 16 bit splits use the proper 32 bit assignments and split the result when writing to the interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Cleanup c_can_write_msg_object()Thomas Gleixner2014-04-242-33/+24
| | | | | | | | | | | | | | | | | | | | | | Remove the MASK from the TX transfer side. Make the code readable and get rid of the annoying IFX_WRITE_XXX_16BIT macros which are just obfuscating the code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Cleanup c_can_msg_obj_put/get()Thomas Gleixner2014-04-241-44/+16
| | | | | | | | | | | | | | | | Sigh! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Cleanup c_can_inval_msg_object()Thomas Gleixner2014-04-241-5/+5
| | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Cleanup setup of receive buffersThomas Gleixner2014-04-241-21/+17
| | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Cleanup c_can_read_msg_object()Thomas Gleixner2014-04-241-17/+15
| | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Cleanup irq enable/disableThomas Gleixner2014-04-241-25/+12
| | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Work around C_CAN RX wreckageThomas Gleixner2014-04-242-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alexander reported that the new optimized handling of the RX fifo causes random packet loss on Intel PCH C_CAN hardware. After a few fruitless debugging sessions I got hold of a PCH (eg20t) afflicted system. That machine does not have the CAN interface wired up, but it was possible to reproduce the issue with the HW loopback mode. As Alexander observed correctly, clearing the NewDat flag along with reading out the message buffer causes that issue on C_CAN, while D_CAN handles that correctly. Instead of restoring the original message buffer handling horror the following workaround solves the issue: transfer buffer to IF without clearing the NewDat handle the message clear NewDat bit That's similar to the original code but conditional for C_CAN. I really wonder why all user manuals (C_CAN, Intel PCH and some more) recommend to clear the NewDat bit right away. The knows it all Oracle operated by Gurgle does not unearth any useful information either. I simply cannot believe that we are the first to uncover that HW issue. Reported-and-tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Disable rx split as workaroundThomas Gleixner2014-04-242-14/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RX buffer split causes packet loss in the hardware: What happens is: RX Packet 1 --> message buffer 1 (newdat bit is not cleared) RX Packet 2 --> message buffer 2 (newdat bit is not cleared) RX Packet 3 --> message buffer 3 (newdat bit is not cleared) RX Packet 4 --> message buffer 4 (newdat bit is not cleared) RX Packet 5 --> message buffer 5 (newdat bit is not cleared) RX Packet 6 --> message buffer 6 (newdat bit is not cleared) RX Packet 7 --> message buffer 7 (newdat bit is not cleared) RX Packet 8 --> message buffer 8 (newdat bit is not cleared) Clear newdat bit in message buffer 1 Clear newdat bit in message buffer 2 Clear newdat bit in message buffer 3 Clear newdat bit in message buffer 4 Clear newdat bit in message buffer 5 Clear newdat bit in message buffer 6 Clear newdat bit in message buffer 7 Clear newdat bit in message buffer 8 Now if during that clearing of newdat bits, a new message comes in, the HW gets confused and drops it. It does not matter how many of them you clear. I put a delay between clear of buffer 1 and buffer 2 which was long enough that the message should have been queued either in buffer 1 or buffer 9. But it did not show up anywhere. The next message ended up in buffer 1. So the hardware lost a packet of course without telling it via one of the error handlers. That does not happen on all clear newdat bit events. I see one of 10k packets dropped in the scenario which allows us to reproduce. But the trace looks always the same. Not splitting the RX Buffer avoids the packet loss but can cause reordering. It's hard to trigger, but it CAN happen. With that mode we use the HW as it was probably designed for. We read from the buffer 1 upwards and clear the buffer as we get the message. That's how all microcontrollers use it. So I assume that the way we handle the buffers was never really tested. According to the public documentation it should just work :) Let the user decide which evil is the lesser one. [ Oliver Hartkopp: Provided a sane config option and help text and made me switch to favour potential and unlikely reordering over packet loss ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Get rid of pointless interruptsThomas Gleixner2014-04-242-77/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver handles pointlessly TWO interrupts per packet. The reason is that it enables the status interrupt which fires for each rx and tx packet and it enables the per message object interrupts as well. The status interrupt merily acks or in case of D_CAN ignores the TX/RX state and then the message object interrupt fires. The message objects interrupts are only useful if all message objects have hardware filters activated. But we don't have that and its not simple to implement in that driver without rewriting it completely. So we can ditch the message object interrupts and handle the RX/TX right away from the status interrupt. Instead of TWO we handle ONE. Note: We must keep the TXIE/RXIE bits in the message buffers because the status interrupt alone is not reliable enough in corner cases. If we ever have the need for HW filtering, then this code needs a complete overhaul and we can think about it then. For now we prefer a lower interrupt load. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Avoid status register update for D_CANThomas Gleixner2014-04-241-3/+6
| | | | | | | | | | | | | | | | | | On D_CAN the RXOK, TXOK and LEC bits are cleared/set on read of the status register. No need to update them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Simplify buffer reenablingThomas Gleixner2014-04-241-10/+6
| | | | | | | | | | | | | | | | | | Instead of writing to the message object we can simply clear the NewDat bit with the get method. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: c_can: Always update error statsThomas Gleixner2014-04-241-6/+7
| | | | | | | | | | | | | | | | | | If the allocation of the error skb fails, we still want to see the error statistics. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
OpenPOWER on IntegriCloud