summaryrefslogtreecommitdiffstats
path: root/drivers/net/8139too.c
Commit message (Collapse)AuthorAgeFilesLines
* 8139x: reduce message severity on driver overlapStephen Hemminger2008-10-221-3/+2
| | | | | | | | | | | | | | | The 8139 drivers are a source of error messages that confuse users. Since this device can not be disambiguated by normal PCI device id's two drivers match the same info. But the module utilities seem to correctly handle this overlap, they try one driver, then if that doesn't load try the other. Therefore there is no need for a message to be logged with error level severity, just using info level instead. Can't be completely silent because user might have configure one driver and forgot the other one. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: move wmb before TX DMA startAndreas Oberritter2008-10-081-1/+6
| | | | | | | | | The write barrier should be used before starting a DMA transfer. This fixes a problem, where almost all packets received on another machine had garbled content. Tested with an RTL8100C on a MIPS machine. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: [cosmetic] fix incorrect register for flash-romMats Erik Andersson2008-09-241-1/+2
| | | | | | | | | | | | | | | | | | | | I would like to submit a correction to the driver drivers/net/8139too.c, which in no way changes the compiled driver, but does change the value of a previously incorrect value for the configuration register address of Flash PROM on the network processor rtl8139C. This corrected value is in accordance with the datasheet for rtl8139C, and in addition this new value is indeed used in other functional drivers that use this adapter for programming a Flash memory chip in situ. But as said, the two new constants are never referenced in the driver maintained by you: they are only informational and correct! Mats Erik Andersson, meand@users.sourceforge.net Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: use netdev_alloc_skbKevin Lo2008-09-031-2/+2
| | | | | | | | This patch uses netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also cleanup the alignment code. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: Fall back to PIO when MMIO fails.Dave Jones2008-07-221-3/+5
| | | | | Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: Force usage of PIO on OQO2Dave Jones2008-07-221-0/+8
| | | | | | | | | | The OQO model 2 has an RTL8139 from Atheros that doesn't like MMIO. It fails on modprobe, with a 'PCI Bus error' message. Force it to always use polled IO. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: Make PIO/MMIO a runtime decision through a module parameter.Dave Jones2008-07-221-64/+64
| | | | | | | | | | This is needed to support devices that only work with PIO without penalising devices that work fine with MMIO in distro kernels. It also allows us to eventually use PIO as a fallback when setting up MMIO fails. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [netdrvr] kill sync_irq-before-freq_irq patternJeff Garzik2008-06-281-1/+0
| | | | | | | synchronize_irq() is superfluous when free_irq() call immediately follows it, because free_irq() also does a synchronize_irq() call of its own. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: some style cleanupsMárton Németh2008-06-281-6/+6
| | | | | | | | | | | | | | | | | | Clean up the following errors and warnings reported by checkpatch.pl: + ERROR: Macros with complex values should be enclosed in parenthesis + WARNING: __func__ should be used instead of gcc specific __FUNCTION__ + WARNING: plain inline is preferred over __inline__ + WARNING: Use #include <linux/io.h> instead of <asm/io.h> + WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> The changes were verified with by comparing the "objdump -d 8139too.ko" output which is exactly the same for the old and new version in case of config CONFIG_8139TOO=m, CONFIG_8139TOO_PIO=n, CONFIG_8139TOO_TUNE_TWISTER=n, CONFIG_8139TOO_8129=n, CONFIG_8139_OLD_RX_RESET=n. Software versions used: gcc 4.2.3, objdump 2.18.0.20080103, on elf32-i386. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 8139too: use netstats in net_device structurePaulius Zaleckas2008-05-131-27/+26
| | | | | | | Use net_device_stats from net_device structure instead of local. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* misc drivers/net annotationsAl Viro2008-03-261-5/+5
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* 8139too fix for DreamcastAdrian McMenamin2008-02-111-1/+1
| | | | | | | | | Updates the 8139too driver to work with recently added (a724605cb7a66d423a494a395f9a8ba871b8a1eb) declared coherent memory patch for the Dreamcast. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Convert files to UTF-8 and some cleanupsJan Engelhardt2007-10-191-1/+1
| | | | | | | | | | | | | | | | | | * Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* [netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_countJeff Garzik2007-10-101-3/+8
| | | | | | | These have been superceded by the new ->get_sset_count() hook. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches2007-10-101-5/+3
| | | | | | | This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle2007-10-101-1/+0
| | | | | | | | | | | | It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [8139too]: tab-align enums and structs; remove dead codeJeff Garzik2007-10-101-175/+169
| | | | | | | | | | * (main change) tab-align hardware register value enums, and hw struct * MMIO_FLUSH_AUDIT_COMPLETE has been defined to 1 for a while. Remove the code activated when it is set to zero. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [netdrvr] 8139cp, 8139too: convert to generic DMAJeff Garzik2007-10-101-10/+10
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NET]: Make NAPI polling independent of struct net_device objects.Stephen Hemminger2007-10-101-25/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: ethtool_perm_addr only has one implementationMatthew Wilcox2007-07-311-1/+0
| | | | | | | | | All drivers implement ethtool get_perm_addr the same way -- by calling the generic function. So we can inline the generic function into the caller and avoid going through the drivers. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2007-07-121-5/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
| * PCI: Change all drivers to use pci_device->revisionAuke Kok2007-07-111-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [NET]: Kill eth_copy_and_sum().David S. Miller2007-07-101-1/+1
|/ | | | | | | | It hasn't "summed" anything in over 7 years, and it's just a straight mempcy ala skb_copy_to_linear_data() so just get rid of it. Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo2007-04-251-3/+3
| | | | | | | To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
* [ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo2007-04-251-1/+0
| | | | | | | One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8139too: RTNL and flush_scheduled_work deadlockFrancois Romieu2007-02-201-23/+17
| | | | | | | | | | | Your usual dont-flush_scheduled_work-with-RTNL-held stuff. It is a bit different here since the thread runs permanently or is only occasionally kicked for recovery depending on the hardware revision. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] net, 8139too.c: fix netpoll deadlockIngo Molnar2006-12-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix deadlock in the 8139too driver: poll handlers should never forcibly enable local interrupts, because they might be used by netpoll/printk from IRQ context. ================================= [ INFO: inconsistent lock state ] 2.6.19 #11 --------------------------------- inconsistent {softirq-on-W} -> {in-softirq-W} usage. swapper/1 [HC0[0]:SC1[1]:HE1:SE0] takes: (&npinfo->poll_lock){-+..}, at: [<c0350a41>] net_rx_action+0x64/0x1de {softirq-on-W} state was registered at: [<c0134c86>] mark_lock+0x5b/0x39c [<c0135012>] mark_held_locks+0x4b/0x68 [<c01351e9>] trace_hardirqs_on+0x115/0x139 [<c02879e6>] rtl8139_poll+0x3d7/0x3f4 [<c035c85d>] netpoll_poll+0x82/0x32f [<c035c775>] netpoll_send_skb+0xc9/0x12f [<c035cdcc>] netpoll_send_udp+0x253/0x25b [<c0288463>] write_msg+0x40/0x65 [<c011cead>] __call_console_drivers+0x45/0x51 [<c011cf16>] _call_console_drivers+0x5d/0x61 [<c011d4fb>] release_console_sem+0x11f/0x1d8 [<c011d7d7>] register_console+0x1ac/0x1b3 [<c02883f8>] init_netconsole+0x55/0x67 [<c010040c>] init+0x9a/0x24e [<c01049cf>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff irq event stamp: 819992 hardirqs last enabled at (819992): [<c0350a16>] net_rx_action+0x39/0x1de hardirqs last disabled at (819991): [<c0350b1e>] net_rx_action+0x141/0x1de softirqs last enabled at (817552): [<c01214e4>] __do_softirq+0xa3/0xa8 softirqs last disabled at (819987): [<c0106051>] do_softirq+0x5b/0xc9 other info that might help us debug this: no locks held by swapper/1. stack backtrace: [<c0104d88>] dump_trace+0x63/0x1e8 [<c0104f26>] show_trace_log_lvl+0x19/0x2e [<c010532d>] show_trace+0x12/0x14 [<c0105343>] dump_stack+0x14/0x16 [<c0134980>] print_usage_bug+0x23c/0x246 [<c0134d33>] mark_lock+0x108/0x39c [<c01356a7>] __lock_acquire+0x361/0x9ed [<c0136018>] lock_acquire+0x56/0x72 [<c03aff1f>] _spin_lock+0x35/0x42 [<c0350a41>] net_rx_action+0x64/0x1de [<c0121493>] __do_softirq+0x52/0xa8 [<c0106051>] do_softirq+0x5b/0xc9 [<c0121338>] irq_exit+0x3c/0x48 [<c0106163>] do_IRQ+0xa4/0xbd [<c01047c6>] common_interrupt+0x2e/0x34 [<c011db92>] vprintk+0x2c0/0x309 [<c011dbf6>] printk+0x1b/0x1d [<c01003f2>] init+0x80/0x24e [<c01049cf>] kernel_thread_helper+0x7/0x10 ======================= Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* WorkStruct: make allyesconfigDavid Howells2006-11-221-12/+14
| | | | | | Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* drivers/net: const-ify ethtool_ops declarationsJeff Garzik2006-09-131-2/+2
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'tmp' into upstreamJeff Garzik2006-09-121-4/+1
|\
| * [PATCH] Remove more unnecessary driver printk'sAndy Gospodarek2006-09-121-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As I promised last week, here is the first pass at removing all unnecessary printk's that exist in network device drivers currently in promiscuous mode. The duplicate messages are not needed so they have been removed. Some of these drivers are quite old and might not need an update, but I did them all anyway. I am currently auditing the remaining conditional printk's and will send out a patch for those soon. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | drivers/net: Remove deprecated use of pci_module_init()Jeff Garzik2006-08-191-1/+1
|/ | | | | | | From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] 8139too deadlock fixArjan van de Ven2006-07-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | > stack backtrace: > [<f9099d31>] rtl8139_start_xmit+0xd9/0xff [8139too] > [<c11ad5ea>] netpoll_send_skb+0x98/0xea This seems to be a real deadlock... So netpoll_send_skb takes the _xmit_lock, which is all nitty gritty but then rtl8139_start_xmit comes around while that lock is taken, and does spin_unlock_irq(&tp->lock); which.. enables interrupts and softirqs; this is quite bad because the xmit lock is taken in softirq context for the watchdog like this: [<c1200376>] _spin_lock+0x23/0x32 [<c11af282>] dev_watchdog+0x14/0xb1 [<c101dab2>] run_timer_softirq+0xf2/0x14a [<c101a691>] __do_softirq+0x55/0xb0 [<c1004a8d>] do_softirq+0x58/0xbd Which would deadlock now that the spin_unlock_irq() has enabled irqs/softirqs while the _xmit_lock is still held. The patch below turns this into a irqsave/irqrestore pair so that interrupts don't get enabled unconditionally. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [netdrvr] use dev_xxx() printk helpers, rather than dev_printk(KERN_xxx, ...Jeff Garzik2006-07-051-17/+10
| | | | | | Suggested by Jiri Slaby. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [netdrvr] Use dev_printk() when ethernet interface isn't availableJeff Garzik2006-07-051-16/+25
| | | | | | | | | | For messages prior to register_netdev(), prefer dev_printk() because that prints out both our driver name and our [PCI | whatever] bus id. Updates: 8139{cp,too}, b44, bnx2, cassini, {eepro,epic}100, fealnx, hamachi, ne2k-pci, ns83820, pci-skeleton, r8169. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner2006-07-021-1/+1
| | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] 64bit resource: fix up printks for resources in networks driversGreg Kroah-Hartman2006-06-271-3/+3
| | | | | | | | | | This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [netdrvr] trim trailing whitespace: 8139*.c, epic100, forcedeth, tulip/*Jeff Garzik2006-05-261-7/+7
|
* [PATCH] Fix "value computed not used" warningsTakashi Iwai2006-03-241-1/+1
| | | | | | | | | | | Fixes for annoying gcc-4.1 compile warnings "value computed not used". Simply cast to void. (akpm: Linus will go ballistic...) Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [NET]: Convert RTNL to mutex.Stephen Hemminger2006-03-201-1/+1
| | | | | | | | This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Massive net driver const-ification.Arjan van de Ven2006-03-031-2/+2
|
* 8139too: fix a TX timeout watchdog thread against NAPI softirq raceFrancois Romieu2006-02-011-12/+26
| | | | | | | Ingo's stealth lock validator detected that both thread acquire dev->xmit_lock and tp->rx_lock in reverse order. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
* [PATCH] turn "const static" into "static const"Jesper Juhl2006-01-101-1/+1
| | | | | | | | | | | | | ICC likes to complain about storage class not being first, GCC doesn't care much (except for cases like "inline static"). have a hard time seeing how it could break anything. Thanks to Gabriel A. Devenyi for pointing out http://linuxicc.sourceforge.net/ which is what made me create this patch. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [netdrvr 8139too] fast poll for thread, if an unlikely race occursJeff Garzik2005-11-101-1/+7
| | | | | | | | | The rtl8139 thread is triggered only on rare 8139 hardware, the race itself is unlikely, and the impact of racing is low. We don't care enough to create a more-complex race-free solution. Rather, if the trylock fails, we now simply poll twice a second until we do get the lock.
* [netdrvr 8139too] use rtnl_shlock_nowait() rather than rtnl_lock_interruptible()Jeff Garzik2005-11-041-1/+1
|
* [netdrvr 8139too] use cancel_rearming_delayed_work() to cancel threadJeff Garzik2005-11-041-16/+9
| | | | Noted by Herbert Xu.
* [netdrvr 8139too] replace hand-crafted kernel thread with workqueueJeff Garzik2005-10-311-54/+33
| | | | | | Gone are the days when 8139too was a shining example of how to use kernel threads. Delayed workqueues are easier, and map precisely to our task: running code from a kernel thread, after a periodic sleep.
* [PATCH] 8139too: fix resume for Realtek 8100B/8139DJohn W. Linville2005-10-181-1/+2
| | | | | | | | Add "HasHltClk" flag for RTL-8100B/8139D hardware in order to fix problems resuming from suspend-to-RAM. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
OpenPOWER on IntegriCloud