summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
Commit message (Collapse)AuthorAgeFilesLines
* mtd: rawnand: denali_dt: set clk_x_rate to 200 MHz unconditionallyMasahiro Yamada2018-06-221-1/+5
| | | | | | | | | | | | | | | | | | | | | | Since commit 1bb88666775e ("mtd: nand: denali: handle timing parameters by setup_data_interface()"), denali_dt.c gets the clock rate from the clock driver. The driver expects the frequency of the bus interface clock, whereas the clock driver of SOCFPGA provides the core clock. Thus, the setup_data_interface() hook calculates timing parameters based on a wrong frequency. To make it work without relying on the clock driver, hard-code the clock frequency, 200MHz. This is fine for existing DT of UniPhier, and also fixes the issue of SOCFPGA because both platforms use 200 MHz for the bus interface clock. Fixes: 1bb88666775e ("mtd: nand: denali: handle timing parameters by setup_data_interface()") Cc: linux-stable <stable@vger.kernel.org> #4.14+ Reported-by: Philipp Rosenberger <p.rosenberger@linutronix.de> Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: dataflash: Use ULL suffix for 64-bit constantsGeert Uytterhoeven2018-06-221-2/+2
| | | | | | | | | | | | | | With gcc 4.1.2 when compiling for 32-bit: drivers/mtd/devices/mtd_dataflash.c:736: warning: integer constant is too large for ‘long’ type drivers/mtd/devices/mtd_dataflash.c:737: warning: integer constant is too large for ‘long’ type Add the missing "ULL" suffixes to fix this. Fixes: 67e4145ebf2c161d ("mtd: dataflash: Add flash_info for AT45DB641E") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: cfi_cmdset_0002: Avoid walking all chips when unlocking.Joakim Tjernlund2018-06-221-0/+2
| | | | | | | | | | cfi_ppb_unlock() walks all flash chips when unlocking sectors, avoid walking chips unaffected by the unlock operation. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: cfi_cmdset_0002: Fix unlocking requests crossing a chip boudaryJoakim Tjernlund2018-06-221-1/+1
| | | | | | | | | | | | | The "sector is in requested range" test used to determine whether sectors should be re-locked or not is done on a variable that is reset everytime we cross a chip boundary, which can lead to some blocks being re-locked while the caller expect them to be unlocked. Fix the check to make sure this cannot happen. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: cfi_cmdset_0002: fix SEGV unlocking multiple chipsJoakim Tjernlund2018-06-221-3/+3
| | | | | | | | | | | | | cfi_ppb_unlock() tries to relock all sectors that were locked before unlocking the whole chip. This locking used the chip start address + the FULL offset from the first flash chip, thereby forming an illegal address. Fix that by using the chip offset(adr). Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: cfi_cmdset_0002: Use right chip in do_ppb_xxlock()Joakim Tjernlund2018-06-221-4/+5
| | | | | | | | | | | | do_ppb_xxlock() fails to add chip->start when querying for lock status (and chip_ready test), which caused false status reports. Fix that by adding adr += chip->start and adjust call sites accordingly. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: All AC chips have a broken GET_FEATURES(TIMINGS).Mason Yang2018-06-221-12/+36
| | | | | | | | | | | Make sure we flag all broken chips as not supporting this feature. Also move this logic to a new function to keep things readable. Fixes: 34c5c01e0c8c ("mtd: rawnand: macronix: nack the support of changing timings for one chip") Cc: <stable@vger.kernel.org> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: fix return value check for bad block statusAbhishek Sahu2018-06-221-1/+1
| | | | | | | | | | | | | | Positive return value from read_oob() is making false BAD blocks. For some of the NAND controllers, OOB bytes will be protected with ECC and read_oob() will return number of bitflips. If there is any bitflip in ECC protected OOB bytes for BAD block status page, then that block is getting treated as BAD. Fixes: c120e75e0e7d ("mtd: nand: use read_oob() instead of cmdfunc() for bad block check") Cc: <stable@vger.kernel.org> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: mxc: set spare area size register explicitlyMartin Kaiser2018-06-191-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The v21 version of the NAND flash controller contains a Spare Area Size Register (SPAS) at offset 0x10. Its setting defaults to the maximum spare area size of 218 bytes. The size that is set in this register is used by the controller when it calculates the ECC bytes internally in hardware. Usually, this register is updated from settings in the IIM fuses when the system is booting from NAND flash. For other boot media, however, the SPAS register remains at the default setting, which may not work for the particular flash chip on the board. The same goes for flash chips whose configuration cannot be set in the IIM fuses (e.g. chips with 2k sector size and 128 bytes spare area size can't be configured in the IIM fuses on imx25 systems). Set the SPAS register explicitly during the preset operation. Derive the register value from mtd->oobsize that was detected during probe by decoding the flash chip's ID bytes. While at it, rename the define for the spare area register's offset to NFC_V21_RSLTSPARE_AREA. The register at offset 0x10 on v1 controllers is different from the register on v21 controllers. Fixes: d484018 ("mtd: mxc_nand: set NFC registers after reset") Cc: stable@vger.kernel.org Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: micron: add ONFI_FEATURE_ON_DIE_ECC to supported featuresChris Packham2018-06-191-0/+2
| | | | | | | | | | | Add ONFI_FEATURE_ON_DIE_ECC to the set/get features list for Micron NAND flash. Fixes: 789157e41a06 ("mtd: rawnand: allow vendors to declare (un)supported features") Cc: <stable@vger.kernel.org> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds2018-06-1230-66/+88
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
| * treewide: Use array_size() in vzalloc()Kees Cook2018-06-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
| * treewide: Use array_size() in vmalloc()Kees Cook2018-06-125-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
| * treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook2018-06-123-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
| * treewide: kzalloc() -> kcalloc()Kees Cook2018-06-1213-19/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
| * treewide: kmalloc() -> kmalloc_array()Kees Cook2018-06-1215-34/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* | Merge tag 'armsoc-soc' of ↵Linus Torvalds2018-06-111-3/+3
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Here are the main updates for SoC support (besides DT additions) for ARM 32- and 64-bit platforms. The branch also contains defconfig updates to turn on drivers and options as needed on the various platforms. The largest parts of the delta are from cleanups moving platform data and board file setup of TI platforms to ti-sysc bus drivers. There are also some sweeping changes of eeprom and nand setup on Davinci, i.MX and other platforms. Samsung is removing support for Exynos5440, which was an oddball SoC that hasn't been seen much use in designs. Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D). Linus Walleij is also removing support for ux500 (Sony Ericsson) U8540/9540 SoCs that never made it to significant mass production and products" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) MAINTAINERS: add NXP linux team maillist as i.MX reviewer ARM: stm32: Don't select DMA unconditionally on STM32MP157C arm64: defconfig: Enable PCIe on msm8996 and db820c ARM: pxa3xx: enable external wakeup pins ARM: pxa: stargate2: use device properties for at24 eeprom arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 ARM: berlin: switch to SPDX license identifier arm: berlin: remove non-necessary flush_cache_all() ARM: berlin: extend BG2CD Kconfig entry OMAP: CLK: CLKSRC: Add suspend resume hooks ARM: AM43XX: Add functions to save/restore am43xx control registers ASoC: ams_delta: use GPIO lookup table ARM: OMAP1: ams-delta: add GPIO lookup tables bus: ti-sysc: Fix optional clocks array access ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore ...
| * Merge tag 'davinci-for-v4.18/soc' of ↵Olof Johansson2018-05-251-3/+3
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc DaVinci SoC support updates for v4.18 Mainly contains patches to move NAND chipselect to platform data (currently platform device id is being used). These patches have been acked by NAND maintainer and because of the driver dependency an immutable branch has been provided to Boris. The other patch is to remove an unnecessary postcore_initcall() on DM644x which is needed for common clock framework conversion. * tag 'davinci-for-v4.18/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: dm644x: remove unnecessary postcore_initcall() ARM: davinci: aemif: stop using pdev->id as nand chipselect mtd: rawnand: davinci: stop using pdev->id as chipselect ARM: davinci: neuros-osd2: specify the chipselect in davinci_nand_pdata ARM: davinci: dm646x-evm: specify the chipselect in davinci_nand_pdata ARM: davinci: mityomapl138: specify the chipselect in davinci_nand_pdata ARM: davinci: dm644x-evm: specify the chipselect in davinci_nand_pdata ARM: davinci: dm365-evm: specify the chipselect in davinci_nand_pdata ARM: davinci: dm355-leopard: specify the chipselect in davinci_nand_pdata ARM: davinci: dm355-evm: specify the chipselect in davinci_nand_pdata ARM: davinci: da850-evm: specify the chipselect in davinci_nand_pdata ARM: davinci: da830-evm: specify the chipselect in davinci_nand_pdata mtd: rawnand: davinci: store the core chipselect number in platform data Signed-off-by: Olof Johansson <olof@lixom.net>
| | * mtd: rawnand: davinci: stop using pdev->id as chipselectBartosz Golaszewski2018-05-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | All platform now use the core_chipsel field in platform data. Stop using pdev->id in the driver. Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* | | Merge tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds2018-06-108-24/+165
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull UBI and UBIFS updates from Richard Weinberger: - the UBI on-disk format header file is now dual licensed - new way to detect Fastmap problems during runtime - bugfix for Fastmap - minor updates for UBIFS (spelling, comments, vm_fault_t, ...) * tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifs: mtd: ubi: Update ubi-media.h to dual license ubi: fastmap: Detect EBA mismatches on-the-fly ubi: fastmap: Check each mapping only once ubi: fastmap: Correctly handle interrupted erasures in EBA ubi: fastmap: Cancel work upon detach ubifs: lpt: Fix wrong pnode number range in comment ubifs: gc: Fix typo ubifs: log: Some spelling fixes ubifs: Spelling fix someting -> something ubifs: journal: Remove wrong comment ubifs: remove set but never used variable ubifs, xattr: remove misguided quota flags fs: ubifs: Adding new return type vm_fault_t
| * | | mtd: ubi: Update ubi-media.h to dual licenseLionel Debieve2018-06-071-19/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update license template using SPDX. Move the global layout of UBI headers to dual license helping UBI to be the standard solution for raw NAND management. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | | ubi: fastmap: Detect EBA mismatches on-the-flyRichard Weinberger2018-06-071-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now we have the machinery to detect EBA mismatches on-the-fly by comparing the in-memory volume ID and LEB number with the found VID header. This helps to detect malfunction of Fastmap. Signed-off-by: Richard Weinberger <richard@nod.at>
| * | | ubi: fastmap: Check each mapping only onceRichard Weinberger2018-06-076-1/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a bitmap to keep track of which LEB->PEB mapping was checked already. That way we have to read back VID headers only once. Signed-off-by: Richard Weinberger <richard@nod.at>
| * | | ubi: fastmap: Correctly handle interrupted erasures in EBARichard Weinberger2018-06-071-1/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fastmap cannot track the LEB unmap operation, therefore it can happen that after an interrupted erasure the mapping still looks good from Fastmap's point of view, while reading from the PEB will cause an ECC error and confuses the upper layer. Instead of teaching users of UBI how to deal with that, we read back the VID header and check for errors. If the PEB is empty or shows ECC errors we fixup the mapping and schedule the PEB for erasure. Fixes: dbb7d2a88d2a ("UBI: Add fastmap core") Cc: <stable@vger.kernel.org> Reported-by: martin bayern <Martinbayern@outlook.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | | ubi: fastmap: Cancel work upon detachRichard Weinberger2018-06-072-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ben Hutchings pointed out that 29b7a6fa1ec0 ("ubi: fastmap: Don't flush fastmap work on detach") does not really fix the problem, it just reduces the risk to hit the race window where fastmap work races against free()'ing ubi->volumes[]. The correct approach is making sure that no more fastmap work is in progress before we free ubi data structures. So we cancel fastmap work right after the ubi background thread is stopped. By setting ubi->thread_enabled to zero we make sure that no further work tries to wake the thread. Fixes: 29b7a6fa1ec0 ("ubi: fastmap: Don't flush fastmap work on detach") Fixes: 74cdaf24004a ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Martin Townsend <mtownsend1973@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* | | | Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtdLinus Torvalds2018-06-0836-519/+659
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Boris Brezillon: "Core changes: - Add a sysfs attribute to expose available OOB size Driver changes: - Remove HAS_DMA dependency on various drivers - Use dev_get_drvdata() instead of platform_get_drvdata() in docg3 - Replace msleep by usleep_range() in the dataflash driver - Avoid VLA usage in nftl layers - Remove useless .owner assignment in pismo - Fix various issues in the CFI driver - Improve TRX partition handling expose a DT compat for this part parser - Clarify OFFSET_CONTINUOUS meaning NAND core changes: - Add Miquel as a NAND maintainer - Add access mode to the nand_page_io_req struct - Fix kernel-doc in rawnand.h - Support bit-wise majority to recover from corrupted ONFI parameter pages - Stop checking FAIL bit after a SET_FEATURES, as documented in the ONFI spec Raw NAND Driver changes: - Fix and cleanup the error path of many NAND controller drivers - GPMI: + Cleanup/simplification of a few aspects in the driver + Take ECC setup specified in the DT into account - sunxi: remove support for GPIO-based R/B polling - MTK: + Use of_device_get_match_data() instead of of_match_device() + Add an entry in MAINTAINERS for this driver + Fix nand-ecc-step-size and nand-ecc-strength description in the DT bindings doc - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page OneNAND driver changes: - samsung: use dev_get_drvdata() instead of platform_get_drvdata() SPI NOR core changes: - Add support for a bunch of SPI NOR chips - Clear EAR reg when switching to 3-byte addressing mode on Winbond chips SPI NOR controller driver changes: - cadence: Add DMA support for direct mode reads - hisi: Prefix a few functions with hisi_ - intel: + Mark the driver as "dangerous" in Kconfig + Fix atomic sequence handling + Pass a 40us delay (instead of 0us) to readl_poll_timeout() - fsl: + fix a typo in a function name + add support for IP variants embedded in the ls2080a and ls1080a SoCs - stm32: request exclusive control of the reset line" * tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits) mtd: nand: Pass mode information to nand_page_io_req mtd: cfi_cmdset_0002: Change erase one block to enable XIP once mtd: cfi_cmdset_0002: Change erase functions to check chip good only mtd: cfi_cmdset_0002: Change erase functions to retry for error mtd: cfi_cmdset_0002: Change definition naming to retry write operation mtd: cfi_cmdset_0002: Change write buffer to check correct value mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS mtd: bcm47xxpart: add of_match_table with a new DT binding dt-bindings: mtd: document Broadcom's BCM47xx partitions mtd: spi-nor: Add support for EN25QH32 mtd: spi-nor: Add support for is25wp series chips mtd: spi-nor: Add Winbond w25q32jv support mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control mtd: spi-nor: intel: provide a range for poll_timout mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig mtd: spi-nor: intel-spi: Fix atomic sequence handling mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op mtd: rawnand: use bit-wise majority to recover the ONFI param page ...
| * \ \ \ Merge tag 'spi-nor/for-4.18' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon2018-06-077-24/+218
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Core changes: - Add support for a bunch of SPI NOR chips - Clear EAR reg when switching to 3-byte addressing mode on Winbond chips SPI NOR controller driver changes: - cadence: Add DMA support for direct mode reads - hisi: Prefix a few functions with hisi_ - intel: * Mark the driver as "dangerous" in Kconfig * Fix atomic sequence handling * Pass a 40us delay (instead of 0us) to readl_poll_timeout() - fsl: * fix a typo in a function name * add support for IP variants embedded in the ls2080a and ls1080a SoCs - stm32: request exclusive control of the reset line
| | * | | | mtd: spi-nor: Add support for EN25QH32YuheiOKAWA2018-05-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Eon en25qh32 spi nor flash. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: Add support for is25wp series chipsKimmo Rautkoski2018-05-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added support for is25wp032, is25wp064 and is25wp128. Signed-off-by: Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: Add Winbond w25q32jv supportStephen Douthit2018-05-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Datasheet: https://www.winbond.com/resource-files/w25q32jv%20dtr%20revf%2002242017.pdf Minimal testing done with fw_printenv/fw_setenv, test board did not support dual or quad access. Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Tested-by: Stephen Douthit <stephend@silicom-usa.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080aYogesh Gaur2018-05-181-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS2080a/LS1088a supports Freescale Quad SPI controller. Add fsl-quadspi driver support for ls2080a and ls1088a chip. Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset controlPhilipp Zabel2018-05-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Richard Weinberger <richard@nod.at> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: intel: provide a range for poll_timoutNicholas Mc Guire2018-05-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The overall poll time here is INTEL_SPI_TIMEOUT * 1000 which is 5000 * 1000 - so 5seconds and it is coded as a tight loop here delay_us to readl_poll_timeout() is set to 0. As this is never called in an atomic context sleeping should be no issue and there is no reasons for the tight-loop here. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_readYogesh Gaur2018-05-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix api naming typo _init_ahb_read fsl_qspi_init_abh_read --> fsl_qspi_init_ahb_read Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in KconfigMika Westerberg2018-05-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver is not meant for normal users at all but instead such users who really know what they are doing and are able to build their own kernel to enable it. Mark both driver Kconfig entries as dangerous to make sure the driver is not accidentally enabled without understanding possible consequences in doing so. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: intel-spi: Fix atomic sequence handlingMika Westerberg2018-05-181-9/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On many older systems using SW sequencer the PREOP_OPTYPE register contains two preopcodes as following: PREOP_OPTYPE=0xf2785006 The last two bytes are the opcodes decoded to: 0x50 - Write enable for volatile status register 0x06 - Write enable The former is used to modify volatile bits in the status register. For non-volatile bits the latter is needed. Preopcodes are used in SW sequencer to send one command "atomically" without anything else interfering the transfer. The sequence that gets executed is: - Send preopcode (write enable) from PREOP_OPTYPE register - Send the actual SPI command - Poll busy bit in the status register (0x05, RDSR) Commit 8c473dd61bb5 ("spi-nor: intel-spi: Don't assume OPMENU0/1 to be programmed by BIOS") enabled atomic sequence handling but because both preopcodes are programmed, the following happens: if (preop >> 8) val |= SSFSTS_CTL_SPOP; Since on these systems preop >> 8 == 0x50 we end up picking volatile write enable instead. Because of this the actual write command is pretty much NOP unless there is a WREN latched in the chip already. Furthermore we should not really just assume that WREN was issued in previous call to intel_spi_write_reg() because that might not be the case. This updates driver to first check that the opcode is actually available in PREOP_OPTYPE register and if not return error back to the spi-nor core (if the controller is not locked we program it now). In addition we save the opcode to ispi->atomic_preopcode field which is checked in next call to intel_spi_sw_cycle() to actually enable atomic sequence using the requested preopcode. Fixes: 8c473dd61bb5 ("spi-nor: intel-spi: Don't assume OPMENU0/1 to be programmed by BIOS") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: clear Winbond Extended Address Reg on switch to 3-byte addressing.NeilBrown2018-04-211-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Winbond spi-nor flash 32MB and larger have an 'Extended Address Register' as one option for addressing beyond 16MB (Macronix has the same concept, Spansion has EXTADD bits in the Bank Address Register). According to section 8.2.7 Write Extended Address Register (C5h) of the Winbond W25Q256FV data sheet (256M-BIT SPI flash) The Extended Address Register is only effective when the device is in the 3-Byte Address Mode. When the device operates in the 4-Byte Address Mode (ADS=1), any command with address input of A31-A24 will replace the Extended Address Register values. It is recommended to check and update the Extended Address Register if necessary when the device is switched from 4-Byte to 3-Byte Address Mode. So the documentation suggests clearing the EAR after switching to 3-byte mode. Experimentation shows that the EAR is *always* one after the switch to 3-byte mode, so clearing the EAR is mandatory at shutdown for a subsequent 3-byte-addressed reboot to work. Note that some SOCs (e.g. MT7621) do not assert a reset line at normal reboot, so we cannot rely on hardware reset. The MT7621 does assert a reset line at watchdog-reset. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: Add support for XM25QH64A and XM25QH128AHauke Mehrtens2018-04-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These devices are produced by Wuhan Xinxin Semiconductor Manufacturing Corp. (XMC) and found on some routers from Chinese manufactures. The data sheets can be found here: http://www.xmcwh.com/Uploads/2018-03-01/5a9799e4cb355.pdf http://www.xmcwh.com/Uploads/2018-02-05/5a77e6dbe968b.pdf Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: hisi: Avoid generic function namesEzequiel Garcia2018-04-201-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using generic names such as get_if_type() is frowned upon: it suggests a core function (which is not), and then it makes code navigation harder. Given drivers are often used as starting point to write other drivers, generic names tend to spread like the flu. Cure the problem. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: cadence-quadspi: Add DMA support for direct mode readsVignesh R2018-04-201-2/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support to use DMA over memory mapped reads in direct mode. This helps in reducing CPU usage from ~100% to ~10% when reading data from flash. For non-DMA'able/vmalloc'd buffers, driver just falls back to CPU based memcpy. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: add support for ISSI is25lp256Marek Vasut2018-04-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for ISSI is25lp256 spi nor flash. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angelo Dureghello <angelo@sysam.it> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: spi-nor: Add Micron MT25QU02 supportThor Thayer2018-04-201-0/+1
| | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for a new Micron 2Gb Flash memory part. Datasheet is available: mt25q_qlkt_l_02g_cbb_0.pdf Testing was done on a Stratix10 SoCFPGA Development Kit. Reported-by: Sujith Chidurala <sujith.chakra.chidurala@intel.com> Tested-by: Paul Kim <paul.kim@intel.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| * | | | Merge tag 'nand/for-4.18' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon2018-06-0716-400/+267
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Core changes: - Add Miquel as a NAND maintainer - Add access mode to the nand_page_io_req struct - Fix kernel-doc in rawnand.h - Support bit-wise majority to recover from corrupted ONFI parameter pages - Stop checking FAIL bit after a SET_FEATURES, as documented in the ONFI spec Raw NAND Driver changes: - Fix and cleanup the error path of many NAND controller drivers - GPMI: * Cleanup/simplification of a few aspects in the driver * Take ECC setup specified in the DT into account - sunxi: remove support for GPIO-based R/B polling - MTK: * Use of_device_get_match_data() instead of of_match_device() * Add an entry in MAINTAINERS for this driver * Fix nand-ecc-step-size and nand-ecc-strength description in the DT bindings doc - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page OneNAND driver changes: - samsung: use dev_get_drvdata() instead of platform_get_drvdata()
| | * | | | mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES opBoris Brezillon2018-05-151-18/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ONFI spec clearly says that FAIL bit is only valid for PROGRAM, ERASE and READ-with-on-die-ECC operations, and should be ignored otherwise. It seems that checking it after sending a SET_FEATURES is a bad idea because a previous READ, PROGRAM or ERASE op may have failed, and depending on the implementation, the FAIL bit is not cleared until a new READ, PROGRAM or ERASE is started. This leads to ->set_features() returning -EIO while it actually worked, which can sometimes stop a batch of READ/PROGRAM ops. Note that we only fix the ->exec_op() path here, because some drivers are abusing the NAND_STATUS_FAIL flag in their ->waitfunc() implementation to propagate other kind of errors, like wait-ready-timeout or controller-related errors. Let's not try to fix those drivers since they worked fine so far. Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation") Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
| | * | | | mtd: rawnand: use bit-wise majority to recover the ONFI param pageWan, Jane (Nokia - US/Sunnyvale)2018-05-131-5/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per ONFI specification (Rev. 4.0), if all parameter pages have invalid CRC values, the bit-wise majority may be used to recover the contents of the parameter page from the parameter page copies present. Signed-off-by: Jane Wan <Jane.Wan@nokia.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pagesJane Wan2018-05-091-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page read is not valid, the host should read redundant parameter page copies. Fix FSL NAND driver to read the two redundant copies which are mandatory in the specification. Signed-off-by: Jane Wan <Jane.Wan@nokia.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: rawnand: gpmi: remove unnecessary variablesSascha Hauer2018-04-291-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use this->auxiliary_virt and this->auxiliary_phys directly rather than creating extra local variables for them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: rawnand: gpmi: return valid value from bch_set_geometry()Sascha Hauer2018-04-291-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The caller of bch_set_geometry() expects the return value to be an error code, so !0 is not valid. return the error from the just called function instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: rawnand: gpmi: remove direct_dma_map_ok from driver data structSascha Hauer2018-04-293-14/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of putting direct_dma_map_ok into driver struct pass it around between functions to make the code more readable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| | * | | | mtd: rawnand: gpmi: put only once used functions inlineSascha Hauer2018-04-291-66/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | read_page_prepare(), read_page_end() and read_page_swap_end() are trivial functions that are used only once and take 8 arguments each. De-obfuscate the code by open coding these functions in gpmi_ecc_read_page() Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
OpenPOWER on IntegriCloud