summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'for-linus-20160415' of git://git.infradead.org/linux-mtdLinus Torvalds2016-04-151-9/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD fix from Brian Norris: "One MTD fix for v4.6-rc4: In the v4.4 cycle, we relaxed the requirement for assigning mtd->owner, but we didn't remove this error case. It's hit only by drivers that are both: (a) using nand_scan() directly and (b) built as modules We haven't seen explicit complaints about this (most use cases don't fit one or both of the above), but we should definitely not be BUG()'ing here" * tag 'for-linus-20160415' of git://git.infradead.org/linux-mtd: mtd: nand: Drop mtd.owner requirement in nand_scan
| * mtd: nand: Drop mtd.owner requirement in nand_scanEzequiel García2016-04-021-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 807f16d4db95 ("mtd: core: set some defaults when dev.parent is set"), it's now legal for drivers to call nand_scan and nand_scan_ident without setting mtd.owner. Drop the check and while at it remove the BUG() abuse. Fixes: 807f16d4db95 ("mtd: core: set some defaults when dev.parent is set") Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: editorial note - while commit 807f16d4db95 wasn't explicitly broken, some follow-up commits in the v4.4 release broke a few drivers, since they would hit this BUG() if they used nand_scan() and were built as modules] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov2016-04-042-6/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtdLinus Torvalds2016-03-2440-519/+3347
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Brian Norris: "NAND: - Add sunxi_nand randomizer support - begin refactoring NAND ecclayout structs - fix pxa3xx_nand dmaengine usage - brcmnand: fix support for v7.1 controller - add Qualcomm NAND controller driver SPI NOR: - add new ls1021a, ls2080a support to Freescale QuadSPI - add new flash ID entries - support bottom-block protection for Winbond flash - support Status Register Write Protect - remove broken QPI support for Micron SPI flash JFFS2: - improve post-mount CRC scan efficiency General: - refactor bcm63xxpart parser, to later extend for NAND - add writebuf size parameter to mtdram Other minor code quality improvements" * tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits) mtd: nand: remove kerneldoc for removed function parameter mtd: nand: Qualcomm NAND controller driver dt/bindings: qcom_nandc: Add DT bindings mtd: nand: don't select chip in nand_chip's block_bad op mtd: spi-nor: support lock/unlock for a few Winbond chips mtd: spi-nor: add TB (Top/Bottom) protect support mtd: spi-nor: add SPI_NOR_HAS_LOCK flag mtd: spi-nor: use BIT() for flash_info flags mtd: spi-nor: disallow further writes to SR if WP# is low mtd: spi-nor: make lock/unlock bounds checks more obvious and robust mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region mtd: spi-nor: wait for SR_WIP to clear on initial unlock mtd: nand: simplify nand_bch_init() usage mtd: mtdswap: remove useless if (!mtd->ecclayout) test mtd: create an mtd_oobavail() helper and make use of it mtd: kill the ecclayout->oobavail field mtd: nand: check status before reporting timeout mtd: bcm63xxpart: give width specifier an 'int', not 'size_t' mtd: mtdram: Add parameter for setting writebuf size mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd' ...
| * mtd: nand: remove kerneldoc for removed function parameterBrian Norris2016-03-111-1/+0
| | | | | | | | | | | | | | | | | | | | The 'getchip' parameter is gone as of commit 9f3e04297b08 ("mtd: nand: don't select chip in nand_chip's block_bad op"), so kill the doc with it. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
| * mtd: nand: Qualcomm NAND controller driverArchit Taneja2016-03-103-0/+2231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Qualcomm NAND controller is found in SoCs like IPQ806x, MSM7xx, MDM9x15 series. It exists as a sub block inside the IPs EBI2 (External Bus Interface 2) and QPIC (Qualcomm Parallel Interface Controller). These IPs provide a broader interface for external slow peripheral devices such as LCD and NAND/NOR flash memory or SRAM like interfaces. We add support for the NAND controller found within EBI2. For the SoCs of our interest, we only use the NAND controller within EBI2. Therefore, it's safe for us to assume that the NAND controller is a standalone block within the SoC. The controller supports 512B, 2kB, 4kB and 8kB page 8-bit and 16-bit NAND flash devices. It contains a HW ECC block that supports BCH ECC (4, 8 and 16 bit correction/step) and RS ECC(4 bit correction/step) that covers main and spare data. The controller contains an internal 512 byte page buffer to which we read/write via DMA. The EBI2 type NAND controller uses ADM DMA for register read/write and data transfers. The controller performs page reads and writes at a codeword/step level of 512 bytes. It can support up to 2 external chips of different configurations. The driver prepares register read and write configuration descriptors for each codeword, followed by data descriptors to read or write data from the controller's internal buffer. It uses a single ADM DMA channel that we get via dmaengine API. The controller requires 2 ADM CRCIs for command and data flow control. These are passed via DT. The ecc layout used by the controller is syndrome like, but we can't use the standard syndrome ecc ops because of several reasons. First, the amount of data bytes covered by ecc isn't same in each step. Second, writing to free oob space requires us writing to the entire step in which the oob lies. This forces us to create our own ecc ops. One more difference is how the controller accesses the bad block marker. The controller ignores reading the marker when ECC is enabled. ECC needs to be explicity disabled to read or write to the bad block marker. The nand_bbt helpers library hence can't access BBMs for the controller. For now, we skip the creation of BBT and populate chip->block_bad and chip->block_markbad helpers instead. Reviewed-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: don't select chip in nand_chip's block_bad opArchit Taneja2016-03-104-25/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the arguments passed to struct nand_chip's block_bad op is 'getchip', which, if true, is supposed to get and select the nand device, and later unselect and release the device. This op is intended to be replaceable by drivers. The drivers shouldn't be responsible for selecting/unselecting chip. Like other ops, the chip should already be selected before the block_bad op is called. Remove the getchip argument from the block_bad op and nand_block_checkbad. Move the chip selection to nand_block_isbad, since it is the only caller to nand_block_checkbad which requires chip selection. Modify nand_block_bad (the default function for the op) such that it doesn't select the chip. Remove the getchip argument from the bad_block funcs in cafe_nand, diskonchip and docg4 drivers. Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: spi-nor: support lock/unlock for a few Winbond chipsBrian Norris2016-03-071-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These are recent Winbond models that are known to have lock/unlock support via writing the Status Register, and that also support the TB (Top/Bottom) protection bit. Tested on w25q32dw. [Note on style: these entries are getting pretty long lines, so I picked a style that seems reasonable for splitting up the flags separate from the other mostly-similar fields.] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
| * mtd: spi-nor: add TB (Top/Bottom) protect supportBrian Norris2016-03-071-7/+63
| | | | | | | | | | | | | | | | | | | | | | | | Some flash support a bit in the status register that inverts protection so that it applies to the bottom of the flash, not the top. This yields additions to the protection range table, as noted in the comments. Because this feature is not universal to all flash that support lock/unlock, control it via a new flag. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
| * mtd: spi-nor: add SPI_NOR_HAS_LOCK flagBrian Norris2016-03-071-2/+5
| | | | | | | | | | | | | | | | | | | | | | We can't determine this purely by manufacturer type (see commit 67b9bcd36906 ("mtd: spi-nor: fix Spansion regressions (aliased with Winbond)")), and it's not autodetectable by anything like SFDP. So make a new flag for it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
| * mtd: spi-nor: use BIT() for flash_info flagsBrian Norris2016-03-071-8/+8
| | | | | | | | | | | | | | | | | | It's a little easier to read and make sure there are no collisions (IMO). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
| * mtd: spi-nor: disallow further writes to SR if WP# is lowBrian Norris2016-03-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Locking the flash is most useful if it provides real hardware security. Otherwise, it's little more than a software permission bit. A reasonable use case that provides real HW security might be like follows: (1) hardware WP# is deasserted (2) program flash (3) flash range is protected via status register (4) hardware WP# is asserted (5) flash protection range can no longer be changed, until WP# is deasserted In this way, flash protection is co-owned by hardware and software. Now, one would expect to be able to perform step (3) with ioctl(MEMLOCK), except that the spi-nor driver does not set the Status Register Protect bit (a.k.a. Status Register Write Disable (SRWD)), so even though the range is now locked, it does not satisfy step (5) -- it can still be changed by a call to ioctl(MEMUNLOCK). So, let's enable status register protection after the first lock command, and disable protection only when the flash is fully unlocked. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
| * mtd: spi-nor: make lock/unlock bounds checks more obvious and robustBrian Norris2016-03-071-18/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a few different corner cases to the current logic that seem undesirable: * mtd_lock() with offs==0 trips a bounds issue on ofs - mtd->erasesize < 0 * mtd_unlock() on the middle of a flash that is already unlocked will return -EINVAL * probably other corner cases So, let's stop doing "smart" checks like "check the block below us", let's just do the following: (a) pass only non-negative offsets/lengths to stm_is_locked_sr() (b) add a similar stm_is_unlocked_sr() function, so we can check if the *entire* range is unlocked (and not just whether some part of it is unlocked) Then armed with (b), we can make lock() and unlock() much more symmetric: (c) short-circuit the procedure if there is no work to be done, and (d) check the entire range above/below This also aligns well with the structure needed for proper TB (Top/Bottom) support. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
| * mtd: spi-nor: silently drop lock/unlock for already locked/unlocked regionBrian Norris2016-03-071-2/+10
| | | | | | | | | | | | | | | | | | | | If, for instance, the entire flash is already unlocked and I try to mtd_unlock() the entire device, I don't expect to see an EINVAL error. It should just silently succeed. Ditto for mtd_lock(). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
| * mtd: spi-nor: wait for SR_WIP to clear on initial unlockBrian Norris2016-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixup a piece leftover by commit 32321e950d8a ("mtd: spi-nor: wait until lock/unlock operations are ready"). That commit made us wait for the WIP bit to settle after lock/unlock operations, but it missed the open-coded "unlock" that happens at probe() time. We should probably have this code utilize the unlock() routines in the future, to avoid duplication, but unfortunately, flash which need to be unlocked don't all have a proper ->flash_unlock() callback. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Stas Sergeev <stsp@users.sourceforge.net> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
| * mtd: nand: simplify nand_bch_init() usageBoris BREZILLON2016-03-073-30/+31
| | | | | | | | | | | | | | | | | | | | | | | | nand_bch_init() requires several arguments which could directly be deduced from the mtd device. Get rid of those useless parameters. nand_bch_init() is also requiring the caller to provide a proper eccbytes value, while this value could be deduced from the ecc.size and ecc.strength value. Fallback to eccbytes calculation when it is set to 0. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: mtdswap: remove useless if (!mtd->ecclayout) testBoris BREZILLON2016-03-071-8/+0
| | | | | | | | | | | | | | | | | | | | If the MTD device does not have OOB, the mtd->oobsize and mtd->oobavail fields are set to zero, and we are testing those values in the following test. Remove the useless if (!mtd->ecclayout) test. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: create an mtd_oobavail() helper and make use of itBoris BREZILLON2016-03-073-32/+8
| | | | | | | | | | | | | | | | | | | | | | Currently, all MTD drivers/sublayers exposing an OOB area are doing the same kind of test to extract the available OOB size based on the mtd_info and mtd_oob_ops structures. Move this common logic into an inline function and make use of it. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Suggested-by: Priit Laes <plaes@plaes.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: kill the ecclayout->oobavail fieldBoris BREZILLON2016-03-078-59/+51
| | | | | | | | | | | | | | | | | | | | ecclayout->oobavail is just redundant with the mtd->oobavail field. Moreover, it prevents static const definition of ecc layouts since the NAND framework is calculating this value based on the ecclayout->oobfree field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: check status before reporting timeoutBrian Norris2016-03-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit b70af9bef49b ("mtd: nand: increase ready wait timeout and report timeouts"), we increased the likelihood of scheduling during nand_wait(). This makes us more likely to hit the time_before(...) condition, since a lot of time may pass before we get scheduled again. Now, the loop was already buggy, since we don't check if the NAND is ready after exiting the loop; we simply print out a timeout warning. Fix this by doing a final status check before printing a timeout message. This isn't actually a critical bug, since the only effect is a false warning print. But too many prints never hurt anyone, did they? :) Side note: perhaps I'm not smart enough, but I'm not sure what the best policy is for this kind of loop; do we busy loop (i.e., no cond_resched()) to keep the lowest I/O latency (it's not great if the resched is delaying Richard's system ~400ms)? Or do we allow rescheduling, to play nice with the rest of the system (since some operations can take quite a while)? Reported-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Richard Weinberger <richard@nod.at> Reviewed-by: Harvey Hunt <harvey.hunt@imgtec.com>
| * mtd: bcm63xxpart: give width specifier an 'int', not 'size_t'Brian Norris2016-03-071-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Fixes this warning: >> drivers/mtd/bcm63xxpart.c:175:4: note: in expansion of macro 'pr_err' pr_err("invalid rootfs address: %*ph\n", ^ >> include/linux/kern_levels.h:4:18: warning: field width specifier '*' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Wformat=] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: mtdram: Add parameter for setting writebuf sizeAlexander Stein2016-03-071-1/+4
| | | | | | | | | | | | | | | | | | | | | | ubifs uses the write buffer size in recovery algorithm. When inspecting an unclean ubifs recovery fails with writebuf size 64 in mtdram while recovery on actual mtd device with writebuf size of 1024 succeeds. So add a parameter for setting this property. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd'Brian Norris2016-03-071-10/+0
| | | | | | | | | | | | | | | | | | With this removal, we don't need to 'get' the second DMA resource either, as it's also unused. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: spi-nor: fsl-quadspi: add support for layerscapeYao Yuan2016-03-071-1/+1
| | | | | | | | | | | | | | | | | | LS1043a and LS2080A in the Layerscape family also support Freescale Quad SPI, make Quad SPI selectable for these hardwares. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: spi-nor: fsl-quadspi: add support for ls1021aYao Yuan2016-03-072-1/+11
| | | | | | | | | | | | | | | | | | | | | | LS1021a also support Freescale Quad SPI controller. Add fsl-quadspi support for ls1021a chip and make SPI_FSL_QUADSPI selectable for LS1021A SOC hardwares. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Acked-by: Han xu <han.xu@freescale.com> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: spi-nor: fsl-quadspi: add big-endian supportYao Yuan2016-03-071-60/+97
| | | | | | | | | | | | | | | | | | | | | | Add R/W functions for big- or little-endian registers: The qSPI controller's endian is independent of the CPU core's endian. So far, the qSPI have two versions for big-endian and little-endian. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Acked-by: Han xu <han.xu@freescale.com> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: spi-nor: add subsector flag to n25q128aEzequiel García2016-03-041-2/+2
| | | | | | | | | | | | | | | | Micron n25q128axx support subsector (4K) erase so let's update the flags. Tested on n25q128a13. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: pxa3xx_nand: fix dmaengine initializationRobert Jarzmik2016-03-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the driver is initialized in a pure device-tree platform, the driver's probe fails allocating the dma channel : [ 525.624435] pxa3xx-nand 43100000.nand: no resource defined for data DMA [ 525.632088] pxa3xx-nand 43100000.nand: alloc nand resource failed The reason is that the DMA IO resource is not acquired through platform resources but by OF bindings. Fix this by ensuring that DMA IO resources are only queried in the non device-tree case. Fixes: 8f5ba31aa565 ("mtd: nand: pxa3xx-nand: switch to dmaengine") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: sunxi: remove direct mtd->priv accessesBoris BREZILLON2016-03-041-3/+3
| | | | | | | | | | | | | | | | | | mtd->priv is no longer pointing to the struct nand_chip it is attached to. Replace those accesses by mtd_to_nand() calls. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 4be4e03efc7f ("mtd: nand: sunxi: add randomizer support") Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: brcmnand: Fix v7.1 register offsetsFlorian Fainelli2016-02-291-1/+33
| | | | | | | | | | | | | | | | | | | | | | The BRCMNAND controller revision 7.1 is almost 100% compatible with the previous v6.0 register offset layout, except for the Correctable Error Reporting Threshold registers. Fix this by adding another table with the correct offsets for CORR_THRESHOLD and CORR_THRESHOLD_EXT. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: onenand: fix deadlock in onenand_block_markbadAaro Koskinen2016-02-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 5942ddbc500d ("mtd: introduce mtd_block_markbad interface") incorrectly changed onenand_block_markbad() to call mtd_block_markbad instead of onenand_chip's block_markbad function. As a result the function will now recurse and deadlock. Fix by reverting the change. Fixes: 5942ddbc500d ("mtd: introduce mtd_block_markbad interface") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: spi-nor: remove micron_quad_enable()Cyrille Pitchen2016-02-121-45/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch remove the micron_quad_enable() function which force the Quad SPI mode. However, once this mode is enabled, the Micron memory expect ALL commands to use the SPI 4-4-4 protocol. Hence a failure does occur when calling spi_nor_wait_till_ready() right after the update of the Enhanced Volatile Configuration Register (EVCR) in the micron_quad_enable() as the SPI controller driver is not aware about the protocol change. Since there is almost no performance increase using Fast Read 4-4-4 commands instead of Fast Read 1-1-4 commands, we rather keep on using the Extended SPI mode than enabling the Quad SPI mode. Let's take the example of the pretty standard use of 8 dummy cycles during Fast Read operations on 64KB erase sectors: Fast Read 1-1-4 requires 8 cycles for the command, then 24 cycles for the 3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles for the read data; so 131112 clock cycles. On the other hand the Fast Read 4-4-4 would require 2 cycles for the command, then 6 cycles for the 3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles for the read data. So 131088 clock cycles. The theorical bandwidth increase is 0.0%. Now using Fast Read operations on 512byte pages: Fast Read 1-1-4 needs 8+24+8+(512*2) = 1064 clock cycles whereas Fast Read 4-4-4 would requires 2+6+8+(512*2) = 1040 clock cycles. Hence the theorical bandwidth increase is 2.3%. Consecutive reads for non sequential pages is not a relevant use case so The Quad SPI mode is not worth it. mtd_speedtest seems to confirm these figures. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 548cd3ab54da ("mtd: spi-nor: Add quad I/O support for Micron SPI NOR") Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: spi-nor: Add support for s25fl116kSascha Hauer2016-02-121-0/+1
| | | | | | | | | | | | | | | | The Spansion s25fl116k is a 16MBit NOR Flash supporting dual and quad read operations. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: pxa3xx_nand: add support for partial chunksThomas Petazzoni2016-02-121-56/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit is needed to properly support the 8-bits ECC configuration with 4KB pages. When pages larger than 2 KB are used on platforms using the PXA3xx NAND controller, the reading/programming operations need to be split in chunks of 2 KBs or less because the controller FIFO is limited to about 2 KB (i.e a bit more than 2 KB to accommodate OOB data). Due to this requirement, the data layout on NAND is a bit strange, with ECC interleaved with data, at the end of each chunk. When a 4-bits ECC configuration is used with 4 KB pages, the physical data layout on the NAND looks like this: | 2048 data | 32 spare | 30 ECC | 2048 data | 32 spare | 30 ECC | So the data chunks have an equal size, 2080 bytes for each chunk, which the driver supports properly. When a 8-bits ECC configuration is used with 4KB pages, the physical data layout on the NAND looks like this: | 1024 data | 30 ECC | 1024 data | 30 ECC | 1024 data | 30 ECC | 1024 data | 30 ECC | 64 spare | 30 ECC | So, the spare area is stored in its own chunk, which has a different size than the other chunks. Since OOB is not used by UBIFS, the initial implementation of the driver has chosen to not support reading this additional "spare" chunk of data. Unfortunately, Marvell has chosen to store the BBT signature in the OOB area. Therefore, if the driver doesn't read this spare area, Linux has no way of finding the BBT. It thinks there is no BBT, and rewrites one, which U-Boot does not recognize, causing compatibility problems between the bootloader and the kernel in terms of NAND usage. To fix this, this commit implements the support for reading a partial last chunk. This support is currently only useful for the case of 8 bits ECC with 4 KB pages, but it will be useful in the future to enable other configurations such as 12 bits and 16 bits ECC with 4 KB pages, or 8 bits ECC with 8 KB pages, etc. All those configurations have a "last" chunk that doesn't have the same size as the other chunks. In order to implement reading of the last chunk, this commit: - Adds a number of new fields to the pxa3xx_nand_info to describe how many full chunks and how many chunks we have, the size of full chunks and partial chunks, both in terms of data area and spare area. - Fills in the step_chunk_size and step_spare_size variables to describe how much data and spare should be read/written for the current read/program step. - Reworks the state machine to accommodate doing the additional read or program step when a last partial chunk is used. This commit has been tested on a Marvell Armada 398 DB board, with a 4KB page NAND, tested in both 4 bits ECC and 8 bits ECC configurations. Robert Jarzmik has tested on some PXA platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: bcm63xxpart: Move NOR flash layout to a separate functionSimon Arlott2016-02-121-22/+32
| | | | | | | | | | | | | | | | Move the NOR flash layout to a separate function to allow the NAND flash layout to be supported. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: bcm63xxpart: Null terminate and validate conversion of flash stringsSimon Arlott2016-02-121-4/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Strings read from flash could be missing null termination characters, or not contain valid integers. Null terminate the strings and check for errors when converting them to integers. Also validate that the addresses are at least BCM963XX_EXTENDED_SIZE because this will be subtracted from them. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: bcm63xxpart: Extract read of image tag to separate functionSimon Arlott2016-02-121-22/+40
| | | | | | | | | | | | | | Extract image tag reading and CRC check to a separate function. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: bcm63xxpart: Remove dependency on mach-bcm63xxSimon Arlott2016-02-122-16/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Read nvram directly from flash instead of using the in-memory copy that mach-bcm63xx has, to remove the dependency on mach-bcm63xx and allow the parser to work on bmips too. Rename remaining BCM63XX defines to BCM963XX as these are properties of the flash layout on the board. BCM963XX_DEFAULT_PSI_SIZE changes from SZ_64K to 64 because it will be multiplied by SZ_1K later on. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: atmel_nand: Support 32-bit ECC strengthRomain Izard2016-02-122-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the SAMA5D2 controller supports the 32-bit ECC strength, accept it as a valid setting when required by the device tree or the NAND parameter page. Then configure the controller to use this new setting. For the binding: Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: atmel_nand: Support PMECC on SAMA5D2Romain Izard2016-02-122-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with the SAMA5D2, there is a new revision of the Atmel PMECC controller that can correct 32 bits in each sector. This controller is not 100% compatible with the previous revision that corrected a maximum of 24 bits by sector, as some register addresses overlap. Using information from the device tree, we can configure the driver to work with both versions. For the binding: Acked-by: Rob Herring <robh@kernel.org> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: atmel_nand: Support variable RB_EDGE interruptsRomain Izard2016-02-122-9/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NFC controller used to accelerate the NAND transfers on SAMA5 chips can use either RB_EDGE0 or RB_EDGE3 as its ready/busy interrupt bit. Use the controller's compatible string to select the correct bit. For the binding: Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Wenyou Yang <Wenyou.yang@atmel.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: pxa3xx_nand: add register access debugRobert Jarzmik2016-02-011-5/+17
| | | | | | | | | | | | | | | | | | Add verbose debug for register accesses. This enables easier debugging by following where and how hardware is stimulated, and how it answers. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: cs553x: Fix dependencies for !HAS_IOMEM archsRichard Weinberger2016-02-011-0/+1
| | | | | | | | | | | | | | | | | | Not every arch has io memory nor can this driver ever work on UML/i386. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: Fix dependencies for !HAS_IOMEM archsRichard Weinberger2016-01-262-0/+3
| | | | | | | | | | | | | | | | | | Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: vf610: remove useless mtd->ecclayout assignmentBoris BREZILLON2016-01-261-2/+0
| | | | | | | | | | | | | | | | | | The NAND core layer is already taking care of ecclayout propagation. Remove this useless assignment. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: lpc32xx_mlc: fix ecc.sizeBoris BREZILLON2016-01-261-1/+1
| | | | | | | | | | | | | | | | According to the ECC layout description the actual ecc.size is 512 bytes and not mtd->writesize. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: kill unused ->ecclayout field in platform_nand_chip structBoris BREZILLON2016-01-261-1/+0
| | | | | | | | | | | | | | This field is not set in any board file and can thus be dropped. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: jz4740: kill the ->ecc_layout fieldBoris BREZILLON2016-01-261-3/+0
| | | | | | | | | | | | | | | | | | ->ecc_layout is not used by any board file. Kill this field to avoid any confusion. New boards are encouraged to use the default ECC layout defined in NAND core. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: s3c2410: kill the ->ecc_layout fieldBoris BREZILLON2016-01-261-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | The s3c2410 is allowing board data to overload the default ECC layout defined inside the driver, but this feature is not used by board specific definitions. Kill this field so that we can easily move to a model where ecclayout are dynamically allocated by the NAND controller driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * Merge v4.5-rc1 with MTD -next developmentBrian Norris2016-01-2410-80/+358
| |\ | | | | | | | | | | | | | | | To start from a good base. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
OpenPOWER on IntegriCloud