summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/mtdcore.c
Commit message (Collapse)AuthorAgeFilesLines
* mtd: part: Create the master device node when partitionedDan Ehrenberg2015-04-051-16/+36
| | | | | | | | | | | | | | | | | | | For many use cases, it helps to have a device node for the entire MTD device as well as device nodes for the individual partitions. For example, this allows querying the entire device's properties. A common idiom is to create an additional partition which spans over the whole device. This patch makes a config option, CONFIG_MTD_PARTITIONED_MASTER, which makes the master partition present even when the device is partitioned. This isn't turned on by default since it presents a backwards-incompatible device numbering. The patch also makes the parent of a partition device be the master, if the config flag is set, now that the master is a full device. Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtdLinus Torvalds2015-02-181-0/+28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Brian Norris: "NAND: - Add new Hisilicon NAND driver for Hip04 - Add default reboot handler, to ensure all outstanding erase transactions complete in time - jz4740: convert to use GPIO descriptor API - Atmel: add support for sama5d4 - Change default bitflip threshold to 75% of correction strength - Miscellaneous cleanups and bugfixes SPI NOR: - Freescale QuadSPI: - Fix a few probe() and remove() issues - Add a MAINTAINERS entry for this driver - Tweak transfer size to increase read performance - Add suspend/resume support - Add Micron quad I/O support - ST FSM SPI: miscellaneous fixes JFFS2: - gracefully handle corrupted 'offset' field found on flash Other: - bcm47xxpart: add tweaks for a few new devices - mtdconcat: set return lengths properly for mtd_write_oob() - map_ram: enable use with mtdoops - maps: support fallback to ROM/UBI for write-protected NOR flash" * tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits) mtd: hisilicon: && vs & typo jffs2: fix handling of corrupted summary length mtd: hisilicon: add device tree binding documentation mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc mtd: avoid registering reboot notifier twice mtd: concat: set the return lengths properly mtd: kconfig: replace PPC_OF with PPC mtd: denali: remove unnecessary stubs mtd: nand: remove redundant local variable MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver mtd: fsl-quadspi: improve read performance by increase AHB transfer size mtd: fsl-quadspi: Remove unnecessary 'map_failed' label mtd: fsl-quadspi: Remove unneeded success/error messages mtd: fsl-quadspi: Fix the error paths mtd: nand: omap: drop condition with no effect mtd: nand: jz4740: Convert to GPIO descriptor API mtd: nand: Request strength instead of bytes for soft BCH mtd: nand: default bitflip-reporting threshold to 75% of correction strength mtd: atmel_nand: introduce a new compatible string for sama5d4 chip mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction() ...
| * mtd: avoid registering reboot notifier twiceNiklas Cassel2015-02-071-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | Calling mtd_device_parse_register with the same mtd_info (e.g. registering several partitions on a single device) would add the same reboot notifier twice, causing an infinte loop in notifier_chain_register during boot up. Signed-off-by: Niklas Cassel <nks@flawful.org> [Brian: add FIXME comments] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: implement common reboot notifier boilerplateBrian Norris2015-01-071-0/+20
| | | | | | | | | | | | | | | | cfi_cmdset_000{1,2}.c already implement their own reboot notifiers, and we're going to add one for NAND. Let's put the boilerplate in one place. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Scott Branden <sbranden@broadcom.com>
* | mtd: export new mtd_mmap_capabilitiesArnd Bergmann2015-01-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recently added mtd_mmap_capabilities can be used from loadable modules, in particular romfs, but is not exported, so we get ERROR: "mtd_mmap_capabilities" [fs/romfs/romfs.ko] undefined! This adds the missing export. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b4caecd48005f ("fs: introduce f_op->mmap_capabilities for nommu mmap support") Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | fs: introduce f_op->mmap_capabilities for nommu mmap supportChristoph Hellwig2015-01-201-58/+22
|/ | | | | | | | | | | | | | | | | | | Since "BDI: Provide backing device capability information [try #3]" the backing_dev_info structure also provides flags for the kind of mmap operation available in a nommu environment, which is entirely unrelated to it's original purpose. Introduce a new nommu-only file operation to provide this information to the nommu mmap code instead. Splitting this from the backing_dev_info structure allows to remove lots of backing_dev_info instance that aren't otherwise needed, and entirely gets rid of the concept of providing a backing_dev_info for a character device. It also removes the need for the mtd_inodefs filesystem. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* mtd: remove dead non-char logicBrian Norris2014-08-191-8/+5
| | | | | | | | | | | | | | | | | MTD used to allow compiling out character device support. This was dropped in the following commit, but some of the accompanying logic was never dropped: commit 660685d9d1b4730f0b5ca97fa95f272f99c63bce Author: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Date: Thu Mar 14 13:27:40 2013 +0200 mtd: merge mtdchar module with mtdcore The weird logic was flagged by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: correct upper bounds check for mtd_*() APIsBrian Norris2014-08-191-13/+13
| | | | | | | | | | | | | When checking the upper boundary (i.e., whether an address is higher than the maximum size of the MTD), we should be doing an inclusive check (greater or equal). For instance, an address of 16MB (0x1000000) on a 16MB device is invalid. The strengthening of this bounds check is redundant for those which already have a address+length check and ensure that the length is non-zero, but let's just fix them all, for completeness. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: Introduce mtd_block_isreserved()Ezequiel Garcia2014-07-081-2/+12
| | | | | | | | | | | | | | In addition to mtd_block_isbad(), which checks if a block is bad or reserved, it's needed to check if a block is reserved only (but not bad). This commit adds an MTD interface for it, in a similar fashion to mtd_block_isbad(). While here, fix mtd_block_isbad() so the out-of-bounds checking is done before the callback check. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: Add sysfs attributes to expose the ECC stats fieldsEzequiel Garcia2014-07-081-0/+45
| | | | | | | | | | These new sysfs device attributes allow us to retrieve the ECC and bad block stats by poking a sysfs file, which is often more convenient than using the ioctl. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: Fix the behavior of OTP write if there is not enough room for dataChristian Riesch2014-03-101-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a write to one time programmable memory (OTP) hits the end of this memory area, no more data can be written. The count variable in mtdchar_write() in drivers/mtd/mtdchar.c is not decreased anymore. We are trapped in the loop forever, mtdchar_write() will never return in this case. The desired behavior of a write in such a case is described in [1]: - Try to write as much data as possible, truncate the write to fit into the available memory and return the number of bytes that actually have been written. - If no data could be written at all, return -ENOSPC. This patch fixes the behavior of OTP write if there is not enough space for all data: 1) mtd_write_user_prot_reg() in drivers/mtd/mtdcore.c is modified to return -ENOSPC if no data could be written at all. 2) mtdchar_write() is modified to handle -ENOSPC correctly. Exit if a write returned -ENOSPC and yield the correct return value, either then number of bytes that could be written, or -ENOSPC, if no data could be written at all. Furthermore the patch harmonizes the behavior of the OTP memory write in drivers/mtd/devices/mtd_dataflash.c with the other implementations and the requirements from [1]. Instead of returning -EINVAL if the data does not fit into the OTP memory, we try to write as much data as possible/truncate the write. [1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/write.html Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: Add a retlen parameter to _get_{fact,user}_prot_infoChristian Riesch2014-03-101-6/+6
| | | | | | Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: convert to use ATTRIBUTE_GROUPSAxel Lin2014-01-031-9/+1
| | | | | | | Use new ATTRIBUTE_GROUPS macro to declare attribute groups. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: remove duplicated include from mtdcore.cWei Yongjun2013-11-061-1/+0
| | | | | | | | Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: Move major number definitions to major.hEzequiel Garcia2013-11-061-0/+1
| | | | | | | | | This patch moves the char and block major number definitions to major.h to be with the rest of the major numbers. While doing this, include major.h in the files that need it. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: add MTD_MLCNANDFLASH case for mtd_type_show()Huang Shijie2013-10-271-0/+3
| | | | | | | | The current mtd_type_show() misses the MTD_MLCNANDFLASH case. This patch adds the case for it, and also updates the ABI. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: add a new sys node to show the ecc step sizeHuang Shijie2013-08-301-0/+11
| | | | | | | | | | | Add a new sys node to show the ecc step size. The application then can uses this node to get the ecc step size. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* drivers: avoid format string in dev_set_nameKees Cook2013-07-031-1/+1
| | | | | | | | | | | Calling dev_set_name with a single paramter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents, including wrappers like device_create*() and bdi_register(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtdLinus Torvalds2013-05-091-12/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD update from David Woodhouse: - Lots of cleanups from Artem, including deletion of some obsolete drivers - Support partitions larger than 4GiB in device tree - Support for new SPI chips * tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits) mtd: omap2: Use module_platform_driver() mtd: bf5xx_nand: Use module_platform_driver() mtd: denali_dt: Remove redundant use of of_match_ptr mtd: denali_dt: Change return value to fix smatch warning mtd: denali_dt: Use module_platform_driver() mtd: denali_dt: Fix incorrect error check mtd: nand: subpage write support for hardware based ECC schemes mtd: omap2: use msecs_to_jiffies() mtd: nand_ids: use size macros mtd: nand_ids: improve LEGACY_ID_NAND macro a bit mtd: add 4 Toshiba nand chips for the full-id case mtd: add the support to parse out the full-id nand type mtd: add new fields to nand_flash_dev{} mtd: sh_flctl: Use of_match_ptr() macro mtd: gpio: Use of_match_ptr() macro mtd: gpio: Use devm_kzalloc() mtd: davinci_nand: Use of_match_ptr() mtd: dataflash: Use of_match_ptr() macro mtd: remove h720x flash support mtd: onenand: remove OneNAND simulator ...
| * mtd: merge mtdchar module with mtdcoreArtem Bityutskiy2013-04-051-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MTD subsystem has historically tried to be as configurable as possible. The side-effect of this is that its configuration menu is rather large, and we are gradually shrinking it. For example, we recently merged partitions support with the mtdcore. This patch does the next step - it merges the mtdchar module to mtdcore. And in this case this is not only about eliminating too fine-grained separation and simplifying the configuration menu. This is also about eliminating seemingly useless kernel module. Indeed, mtdchar is a module that allows user-space making use of MTD devices via /dev/mtd* character devices. If users do not enable it, they simply cannot use MTD devices at all. They cannot read or write the flash contents. Is it a sane and useful setup? I believe not. And everyone just enables mtdchar. Having mtdchar separate is also a little bit harmful. People sometimes miss the fact that they need to enable an additional configuration option to have user-space MTD interfaces, and then they wonder why on earth the kernel does not allow using the flash? They spend time asking around. Thus, let's just get rid of this module and make it part of mtd core. Note, mtdchar had additional configuration option to enable OTP interfaces, which are present on some flashes. I removed that option as well - it saves a really tiny amount space. [dwmw2: Strictly speaking, you can mount file systems on MTD devices just fine without the mtdchar (or mtdblock) devices; you just can't do other manipulations directly on the underlying device. But still I agree that it makes sense to make this unconditional. And Yay! we get to kill off an instance of checking CONFIG_foo_MODULE, which is an abomination that should never happen.] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mtdcore: remove few useless #ifdef'sArtem Bityutskiy2013-04-051-7/+4
| | | | | | | | | | | | | | | | | | Remove a couple of useles '#ifdef CONFIG_PROC_FS's around procfs functions which anyway turn into empty function in 'proc_fs.h' file when CONFIG_PROC_FS is not defined. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: add 'const' qualifier to a couple of register functionsArtem Bityutskiy2013-04-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'mtd_device_parse_register()' and 'parse_mtd_partitions()' functions accept a an array of character pointers. These functions modify neither the pointers nor the characters they point to. The characters are actually names of the MTD parsers. At the moment, the argument type is 'const char **', which means that only the names of the parsers are constant. Let's turn the argument type into 'const char * const *', which means that both names and the pointers which point to them are constant. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | Include missing linux/slab.h inclusionsDavid Howells2013-04-291-0/+1
|/ | | | | | | | | | | | | | | Include missing linux/slab.h inclusions where the source file is currently expecting to get kmalloc() and co. through linux/proc_fs.h. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: linux-s390@vger.kernel.org cc: sparclinux@vger.kernel.org cc: linux-efi@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: devel@driverdev.osuosl.org cc: x86@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* mtd: convert to idr_alloc()Tejun Heo2013-02-271-7/+2
| | | | | | | | | | Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Revert "revert "Revert "mm: remove __GFP_NO_KSWAPD""" and associated damageLinus Torvalds2012-12-101-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commits a50915394f1fc02c2861d3b7ce7014788aa5066e and d7c3b937bdf45f0b844400b7bf6fd3ed50bac604. This is a revert of a revert of a revert. In addition, it reverts the even older i915 change to stop using the __GFP_NO_KSWAPD flag due to the original commits in linux-next. It turns out that the original patch really was bogus, and that the original revert was the correct thing to do after all. We thought we had fixed the problem, and then reverted the revert, but the problem really is fundamental: waking up kswapd simply isn't the right thing to do, and direct reclaim sometimes simply _is_ the right thing to do. When certain allocations fail, we simply should try some direct reclaim, and if that fails, fail the allocation. That's the right thing to do for THP allocations, which can easily fail, and the GPU allocations want to do that too. So starting kswapd is sometimes simply wrong, and removing the flag that said "don't start kswapd" was a mistake. Let's hope we never revisit this mistake again - and certainly not this many times ;) Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* revert "Revert "mm: remove __GFP_NO_KSWAPD""Andrew Morton2012-11-301-4/+2
| | | | | | | | | | | | | | | | It apepars that this patch was innocent, and we hope that "mm: avoid waking kswapd for THP allocations when compaction is deferred or contended" will fix the final kswapd-spinning cause. Cc: Zdenek Kabelac <zkabelac@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Revert "mm: remove __GFP_NO_KSWAPD"Mel Gorman2012-11-261-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures" reverted, Zdenek Kabelac reported the following Hmm, so it's just took longer to hit the problem and observe kswapd0 spinning on my CPU again - it's not as endless like before - but still it easily eats minutes - it helps to turn off Firefox or TB (memory hungry apps) so kswapd0 stops soon - and restart those apps again. (And I still have like >1GB of cached memory) kswapd0 R running task 0 30 2 0x00000000 Call Trace: preempt_schedule+0x42/0x60 _raw_spin_unlock+0x55/0x60 put_super+0x31/0x40 drop_super+0x22/0x30 prune_super+0x149/0x1b0 shrink_slab+0xba/0x510 The sysrq+m indicates the system has no swap so it'll never reclaim anonymous pages as part of reclaim/compaction. That is one part of the problem but not the root cause as file-backed pages could also be reclaimed. The likely underlying problem is that kswapd is woken up or kept awake for each THP allocation request in the page allocator slow path. If compaction fails for the requesting process then compaction will be deferred for a time and direct reclaim is avoided. However, if there are a storm of THP requests that are simply rejected, it will still be the the case that kswapd is awake for a prolonged period of time as pgdat->kswapd_max_order is updated each time. This is noticed by the main kswapd() loop and it will not call kswapd_try_to_sleep(). Instead it will loopp, shrinking a small number of pages and calling shrink_slab() on each iteration. The temptation is to supply a patch that checks if kswapd was woken for THP and if so ignore pgdat->kswapd_max_order but it'll be a hack and not backed up by proper testing. As 3.7 is very close to release and this is not a bug we should release with, a safer path is to revert "mm: remove __GFP_NO_KSWAPD" for now and revisit it with the view to ironing out the balance_pgdat() logic in general. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Zdenek Kabelac <zkabelac@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'disintegrate-mtd-20121009' of ↵David Woodhouse2012-10-091-4/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/dhowells/linux-headers UAPI Disintegration 2012-10-09 Conflicts: MAINTAINERS arch/arm/configs/bcmring_defconfig arch/arm/mach-imx/clk-imx51-imx53.c drivers/mtd/nand/Kconfig drivers/mtd/nand/bcm_umi_nand.c drivers/mtd/nand/nand_bcm_umi.h drivers/mtd/nand/orion_nand.c
| * mm: remove __GFP_NO_KSWAPDRik van Riel2012-10-091-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When transparent huge pages were introduced, memory compaction and swap storms were an issue, and the kernel had to be careful to not make THP allocations cause pageout or compaction. Now that we have working compaction deferral, kswapd is smart enough to invoke compaction and the quadratic behaviour around isolate_free_pages has been fixed, it should be safe to remove __GFP_NO_KSWAPD. [minchan@kernel.org: Comment fix] [mgorman@suse.de: Avoid direct reclaim for deferred compaction] Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | mtd: check for max_bitflips in mtd_read_oob()Brian Norris2012-09-291-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mtd_read_oob() has some unexpected similarities to mtd_read(). For instance, when ops->datbuf != NULL, nand_base.c might return max_bitflips; however, when ops->datbuf == NULL, nand_base's code potentially could return -EUCLEAN (no in-tree drivers do this yet). In any case where the driver might return max_bitflips, we should translate this into an appropriate return code using the bitflip_threshold. Essentially, mtd_read_oob() duplicates the logic from mtd_read(). This prevents users of mtd_read_oob() from receiving a positive return value (i.e., from max_bitflips) and interpreting it as an unknown error. Artem: amend comments. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: move mtd_read_oob() definition out of mtd.hBrian Norris2012-07-061-0/+9
|/ | | | | | | | | mtd_read_oob() will be expanded a little, so don't leave it in the header as a static inline function. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEANMike Dunn2012-05-131-1/+13
| | | | | | | | | | | | | | | | | | | | | | | The drivers' _read() method, absent an error, returns a non-negative integer indicating the maximum number of bit errors that were corrected in any one region comprising an ecc step. MTD returns -EUCLEAN if this is >= bitflip_threshold, 0 otherwise. If bitflip_threshold is zero, the comparison is not made since these devices lack ECC and always return zero in the non-error case (thanks Brian)¹. Note that this is a subtle change to the driver interface. This and the preceding patches in this set were tested with ubi on top of the nandsim and docg4 devices, running the ubi test io_basic from mtd-utils. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-March/040468.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Brian Norris <computersforpeace@gmail.com> Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: bitflip_threshold added to mtd_info and sysfsMike Dunn2012-05-131-0/+33
| | | | | | | | | | | | | | | | An element 'bitflip_threshold' is added to struct mtd_info, and also exposed as a read/write variable in sysfs. This will be used to determine whether or not mtd_read() returns -EUCLEAN or 0 (absent a hard error). If the driver leaves it as zero, mtd will set it to a default value of ecc_strength. This v2 adds the line that propagates bitflip_threshold from the master to the partitions - thanks Ivan¹. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-April/040900.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: expose ecc_strength through sysfsMike Dunn2012-05-131-0/+10
| | | | | | | | | ecc_strength element of struct mtd_info is exposed as a read-only variable in sysfs. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: unify initialization of erase_info->fail_addrShmulik Ladkani2012-03-271-0/+1
| | | | | | | | | | | | Initialization of 'erase_info->fail_addr' to MTD_FAIL_ADDR_UNKNOWN prior erase operation is duplicated accross several MTD drivers, and also taken care of by some MTD users as well. Harmonize it: initialize 'fail_addr' within 'mtd_erase()' interface. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: check for zero length in OTP functionsArtem Bityutskiy2012-03-271-0/+73
| | | | | | | | | | | | | This patch changes all the OTP functions like 'mtd_get_fact_prot_info()' and makes them return zero immediately if the input 'len' parameter is 0. This is not really needed currently, but most of the other functions do this, and it is just consistent to do the same in the OTP functions. This patch also moves the OTP functions from the header file to mtdcore.c because they become a bit too big for being inlined. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: move zero length verification to MTD API functionsArtem Bityutskiy2012-03-271-0/+21
| | | | | | | | | | | In many places in drivers we verify for the zero length, but this is very inconsistent across drivers. This is obviously the right thing to do, though. This patch moves the check to the MTD API functions instead and removes a lot of duplication. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: harmonize mtd_point interface implementationArtem Bityutskiy2012-03-271-0/+3
| | | | | | | | | | | | | | | | | | | | Some MTD drivers return -EINVAL if the 'phys' parameter is not NULL, trying to convey that they cannot return the physical address. However, this is not very logical because they still can return the virtual address ('virt'). But some drivers (lpddr) just ignore the 'phys' parameter instead, which is a more logical thing to do. Let's harmonize this and: 1. Always initialize 'virt' and 'phys' to 'NULL' in 'mtd_point()'. 2. Do not return an error if the physical address cannot be found. So as a result, all drivers will set 'phys' to 'NULL' if it is not supported. None of the 'mtd_point()' users use 'phys' anyway, so this should not break anything. I guess we could also just delete this parameter later. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: remove retlen zeroing duplicationArtem Bityutskiy2012-03-271-0/+1
| | | | | | | | | | | | | | | The MTD API function now zero the 'retlen' parameter before calling the driver's method — do not do this again in drivers. This removes duplicated '*retlen = 0' assignent from the following methods: 'mtd_point()' 'mtd_read()' 'mtd_write()' 'mtd_writev()' 'mtd_panic_write()' Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: remove R/O checking duplicationArtem Bityutskiy2012-03-271-2/+10
| | | | | | | | | | | Many drivers check whether the partition is R/O and return -EROFS if yes. Let's stop having duplicated checks and move them to the API functions instead. And again a bit of noise - deleted few too sparse newlines, sorry. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: add offset and length checks to the API functionArtem Bityutskiy2012-03-271-0/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | Add verification of the offset and length to MTD API functions and verify that MTD device offset and length are within MTD device size. The modified API functions are: 'mtd_erase()' 'mtd_point()' 'mtd_unpoint()' 'mtd_get_unmapped_area()' 'mtd_read()' 'mtd_write()' 'mtd_panic_write()' 'mtd_lock()' 'mtd_unlock()' 'mtd_is_locked()' 'mtd_block_isbad()' 'mtd_block_markbad()' This patch also uninlines these functions and exports in mtdcore.c because they are not performance-critical and do not have to be inlined. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mtdcore: remove unnecessary mtd->resume checkBrian Norris2012-03-271-1/+1
| | | | | | | | | We don't need to to check for mtd->resume before calling mtd_resume(). mtd_resume() should take care of that. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: add leading underscore to all mtd functionsArtem Bityutskiy2012-03-271-7/+7
| | | | | | | | | | | | | | | | | | | | | This patch renames all MTD functions by adding a "_" prefix: mtd->erase -> mtd->_erase mtd->read_oob -> mtd->_read_oob ... The reason is that we are re-working the MTD API and from now on it is an error to use MTD function pointers directly - we have a corresponding API call for every pointer. By adding a leading "_" we achieve the following: 1. Make sure we convert every direct pointer users 2. A leading "_" suggests that this interface is internal and it becomes less likely that people will use them directly 3. Make sure all the out-of-tree modules stop compiling and the owners spot the big API change and amend them. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mtdcore: Fix build warning when CONFIG_MTD_CHAR is not definedFabio Estevam2012-03-271-1/+1
| | | | | | | | | | | | | Fix the following build warning: drivers/mtd/mtdcore.c: In function ‘mtd_release’: drivers/mtd/mtdcore.c:110: warning: unused variable ‘mtd’ This happens when neither CONFIG_MTD_CHAR nor CONFIG_MTD_CHAR_MODULE are defined. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: fix MTD suspendArtem Bityutskiy2012-01-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | Commits 3fe4bae88460869a8e553397cd9057a4ee7ca341 and 079c985e7a6f4ce60f931cebfdd5ee3c3 broke MTD suspend in 2 ways: 1. When the '->suspend' method is not present, we return -EOPNOTSUPP, but the callers of 'mtd_suspend()' expects 0 instead. 2. Checking of the 'mtd' parameter against NULL has been incorrectly removed in 'mtd_cls_suspend()'. This patch fixes the breakages. This has been found, analyzed, reported and tested by Rafael J. Wysocki <rjw@sisk.pl>. Note, this patch is not needed in the stable tree because it causes a regression introduced during the v3.3 merge window. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: do not use mtd->suspend and mtd->resume directlyArtem Bityutskiy2012-01-091-4/+1
| | | | | | | | Just call the 'mtd_suspend()' and 'mtd_resume()' - they will do nothing if the operation is not defined. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: do not use mtd->lock, unlock and is_locked directlyArtem Bityutskiy2012-01-091-3/+3
| | | | | | | | Instead, call the corresponding MTD API function which will return '-EOPNOTSUPP' if the operation is not supported. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: harmonize mtd_writev usageArtem Bityutskiy2012-01-091-3/+23
| | | | | | | | | | | | | This patch makes the 'mtd_writev()' function more usable and logical. We first teach it to fall-back to the 'default_mtd_writev()' function if the MTD driver does not define its own '->writev()' method. Then we make block2mtd and JFFS2 just 'mtd_writev()' instead of 'default_mtd_writev()' function. This means we can now stop exporting 'default_mtd_writev()' and instead, export 'mtd_writev()'. This is much cleaner and more logical, as well as allows us to get read of another direct 'mtd->writev' access in JFFS2. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mtdcore: export symbols cleanupArtem Bityutskiy2012-01-091-15/+9
| | | | | | | | | | | | The mtdcore.c file is a bit inconsistent - some EXPORT_SYMBOL_GPL declarations follow the corresponding functions, some are placed at the end. This patch harmonizes the file so that EXPORT_SYMBOL_GPL declarations follow the corresponding function. It also removes few extra newlines and trailing white-spaces. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: clean-up the default_mtd_writev functionArtem Bityutskiy2012-01-091-19/+22
| | | | | | | | | | | | | | 1. Teach 'mtd_write()' function to return '-EROFS' if the write method is undefined, and remove the corresponding check from 'default_mtd_writev()'. 2. Do not test 'retlen' for NULL - it cannot be NULL. 3. Few minor coding stile clean-ups. 4. Add a kerneldoc comment Additionally, minor fixes to the kerneldoc comments of the neighbor function. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
OpenPOWER on IntegriCloud