summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/chips
Commit message (Collapse)AuthorAgeFilesLines
* mtd: add support for switching old SST chips into QRY modeGuillaume LECERF2009-11-301-0/+7
| | | | | | | | | | SST 39VF160x/39VF320x and some old SST chips need a special command sequence to enter CFI QueRY mode [1]. This patch adds the relevant sequence to cfi_qry_mode_on(). Tested with 39VF3201. Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: fix M29W800D dev_id and uaddrLadislav Michl2009-11-301-4/+4
| | | | | | | | | | | This one sits in my tree for more than two years... Using device code found on page 12 (http://www.btdesigner.com/pdfs/M29W800D.pdf) and unlock address from page 15 MTD subsytem happily detects ST M29W800DB in 16-bit mode. I do believe original author used only 8-bit mode and thus didn't hit this bug. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: CFI cmdset_0002: enable erase-suspend-programJoakim Tjernlund2009-11-301-13/+3
| | | | | | | | | | | | | | | | | | | | Erase-suspend for writing is required to avoid blocking applications that wish to write some data (to a NOR block other than the one being erased). Particularly, it solves some huge delays that an application (which writes to a UBIFS) will experience if UBI attaches to empty NOR flash. In this case the UBI background thread will erase a lot of blocks and the application can be blocked for minutes because of the "MTD/CFI chip lock". This feature has been disabled for years. Maybe this was because the old code turned it on for erase-suspend read-only chips also (cfip->EraseSuspend & 0x1). This is wrong and corrected now. This patch was tweaked by Norbert van Bolhuis. Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: move manufacturer to the common cfi.h header fileHans-Christian Egtvedt2009-11-301-10/+10
| | | | | | | | | | | | | | This patch moves the MANUFACTURER_ST and MANUFACTURER_INTEL to the include/linux/mtd/cfi.h header file and renames them to CFI_MFR_ST and CFI_MFR_INTEL. CFI_MFR_ST was already present there. All references in drivers/mtd/chips/cfi_cmdset_0001.c are updated to reflect this. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: add lock fixup for AT49BV640D and AT49BV640DT chipsHans-Christian Egtvedt2009-11-301-0/+14
| | | | | | | | | | | | | | | | This patch sets the MTD_POWERUP_LOCK flag for AT49BV640D and AT49BV640DT devices, since the devices are locked when powered up and needs to be unlocked before interfaced. Quote datasheet; "At power-up and reset, all sectors have their Softlock protection mode enabled.". Tested on AVR32 hardware platform with an AT49BV640D flash device. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: add missing put_chip() in cfi_intelext_reset()Nicolas Pitre2009-11-301-0/+1
| | | | | | Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: jedec_probe: add PSD4256G6V idMike Frysinger2009-09-231-0/+19
| | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge branch 'master' of ↵David Woodhouse2009-09-202-2/+2
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/mtd/mtdcore.c Merged in order that I can apply the Nomadik nand/onenand support patches.
| * Nicolas Pitre has a new email addressNicolas Pitre2009-09-152-2/+2
| | | | | | | | | | | | | | | | Due to problems at cam.org, my nico@cam.org email address is no longer valid. FRom now on, nico@fluxnic.net should be used instead. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128GMassimo Cirillo2009-09-192-11/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The M29W128G Numonyx flash devices are intolerant to any 0xFF command: in the Cfi_util.c the function cfi_qry_mode_off() (that resets the device after the autoselect mode) must have a 0xF0 command after the 0xFF command. This fix solves also the cause of the fixup_M29W128G_write_buffer() fix, that can be removed now. The following patch applies to 2.6.30 kernel. Signed-off-by: Massimo Cirillo <maxcir@gmail.com> Acked-by: Alexey Korolev <akorolev@infradead.org> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: jedec: fix compilation problem with I28F640C3B definitionStefan Roese2009-09-191-0/+18
| | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: jedec_probe: fix NEC uPD29F064115 detectionHiroshi Ito2009-09-191-2/+2
|/ | | | | | | | | | | | | | | | | linux v2.6.31-rc6 can not detect NEC uPD29F064115. uPD29F064115 is a 16 bit device. datasheet: http://www.cn.necel.com/memory/cn/download/M16062EJ2V0DS00.pdf This applies the same fix as used for SST chips in commit ca6f12c67ed19718cf37d0f531af9438de85b70c ("jedec_probe: Fix SST 16-bit chip detection"). Signed-off-by: Hiroshi Ito <ito@mlb.co.jp> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: CFI 1.0 and CFI 1.1Daniel Ribeiro2009-06-051-4/+10
| | | | | | | | | | | | | | | This patch allows otpinfo for CFI >= 1.0 and burst read for CFI >= 1.1. references: 1.0: http://www.datasheetcatalog.org/datasheets2/81/816884_1.pdf 1.1: http://milkymist.org/doc/MT28F640J3.pdf http://www.delorie.com/agenda/specs/29066709.pdf Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: CFI: quirk for PF38F4476.Daniel Ribeiro2009-06-051-0/+12
| | | | | | | | | | | | This chip reports CFI 1.3, but the CFI PRI is like CFI 1.1. Add a quirk to pass probe on this chip. This patch depends on "MTD: CFI 1.0 and CFI 1.1" Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: add SST39SF040 chip to jedec_probeMichał Mirosław2009-06-051-0/+13
| | | | | | | | Add SST39SF040 chip (like SST39SF020A but bigger - 4Mbit). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] Fixup for Numonyx M29W128 chipsDarius Augulis2009-04-061-0/+11
| | | | | | | | Prevent NUMONYX M29W128G memories from using write buffer, because it doesn't work properly. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* NOMMU: Present backing device capabilities for MTD chardevsDavid Howells2009-03-242-0/+34
| | | | | | | | | Present backing device capabilities for MTD character device files to allow NOMMU mmap to do direct mapping where possible. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [CHIPS] Add JEDEC probe support for the SST 39VF3201 flash chipYegor Yefremov2009-03-201-0/+16
| | | | | | Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [CHIPS] cfi_cmdset_0001.c: Fix a bug in ↵Graff Yang2009-03-201-2/+6
| | | | | | | | | | | inval_cache_and_wait_for_operation(). If the inval_cache_and_wait_for_operation() is re-entered by write operation when erase operation is in progress, the chip->erase_suspended will be cleared, this cause the erase timeo is not reset and will result time out error for erase. Signed-off-by: Graff Yang <graff.yang@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] map_rom has NULL erase pointerAlan Cox2009-01-111-0/+8
| | | | | | | | | | | Which means if inftl or similar are loaded with it (which is a dumb thing to do admittedly) it may oops. Closes #8108 [dwmw2: change error to -EROFS to match write-protected flash] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] CFI: remove major/minor version check for command set 0x0002Wolfgang Grandegger2009-01-091-0/+10
| | | | | | | | The NOR Flash memory K8P2815UQB from Samsung uses the major version number '0'. Add a quirk to cope with it. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] update internal API to support 64-bit device sizeAdrian Hunter2008-12-104-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | MTD internal API presently uses 32-bit values to represent device size. This patch updates them to 64-bits but leaves the external API unchanged. Extending the external API is a separate issue for several reasons. First, no one needs it at the moment. Secondly, whether the implementation is done with IOCTLs, sysfs or both is still debated. Thirdly external API changes require the internal API to be accepted first. Note that although the MTD API will be able to support 64-bit device sizes, existing drivers do not and are not required to do so, although NAND base has been updated. In general, changing from 32-bit to 64-bit values cause little or no changes to the majority of the code with the following exceptions: - printk message formats - division and modulus of 64-bit values - NAND base support - 32-bit local variables used by mtdpart and mtdconcat - naughtily assuming one structure maps to another in MEMERASE ioctl Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4)Eric W. Biederman2008-11-052-19/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For "unlock" cycles to 16bit devices in 8bit compatibility mode we need to use the byte addresses 0xaaa and 0x555. These effectively match the word address 0x555 and 0x2aa, except the latter has its low bit set. Most chips don't care about the value of the 'A-1' pin in x8 mode, but some -- like the ST M29W320D -- do. So we need to be careful to set it where appropriate. cfi_send_gen_cmd is only ever passed addresses where the low byte is 0x00, 0x55 or 0xaa. Of those, only addresses ending 0xaa are affected by this patch, by masking in the extra low bit when the device is known to be in compatibility mode. [dwmw2: Do it only when (cmd_ofs & 0xff) == 0xaa] v4: Fix stupid typo in cfi_build_cmd_addr that failed to compile I'm writing this patch way to late at night. v3: Bring all of the work back into cfi_build_cmd_addr including calling of map_bankwidth(map) and cfi_interleave(cfi) So every caller doesn't need to. v2: Only modified the address if we our device_type is larger than our bus width. Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] AT49BV6416 has swapped erase regionsHaavard Skinnemoen2008-10-181-4/+12
| | | | | | | | | | | | | | The CFI information read from AT49BV6416 lists the erase regions in the wrong order, causing problems when trying to erase or update the first or last 64KiB block. Work around this by inverting the "top boot" flag, which will effectively reverse the order of the erase regions. This chip is obsolete, but it's used in some existing designs. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detectionChristopher Moore2008-10-181-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds TopBottom detection for most Macronix chips with CFI V1.0. The main purpose of this patch is to add detection of the MX29LV400C B used on the LaCie Ethernet Disk mini V2 NAS. It detects the following parts correctly:- MX28F640C3B T MX29LV002C B MX29LV002NC B MX29LV004C T MX29LV400C T/B MX29LV800C T/B MX29LV160C T/B MX29SL800C T/B MX29SL802C T/B It detects the following uniform part as bottom but it should work correctly:- MX29LV040C For T parts it causes the erase block table to be reversed correctly. For other parts it avoids the bogus "Assuming top" message. It does not detect the following correctly:- MX28F640C3B B MX29LV002C T MX29LV002NC T MX29LV004C B MX29SL400C T/B MX29SL402C T/B If desired I could supply a more complicated patch to handle these as well. Only the MX29LV400C B has been physically tested; others were checked against their data sheets. Signed-off-by: Christopher Moore <moore@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] fix cfi_cmdset_0001 FL_SYNCING race (take 2)Alexander Belyakov2008-09-261-2/+15
| | | | | | | | | | | | The patch fixes CFI issue with multipartitional devices leading to the set of errors or even deadlock. The problem is CFI FL_SYNCING state race with flash operations (e.g. erase suspend). It is reproduced by running intensive writes on one JFFS2 partition and simultaneously performing mount/unmount cycle on another partition of the same chip. Signed-off-by: Alexander Belyakov <abelyako@googlemail.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] Select MTD_CFI_UTIL when MTD_CFI probe routine is enabledDavid Woodhouse2008-09-011-0/+1
| | | | | | | | It requires cfi_qry_mode_on(), which is in cfi_util.c Reported by Russell King Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] Rename and export new cfi_qry_*() functionsDavid Woodhouse2008-08-072-21/+25
| | | | | | | | | | They need to be exported, so let's give them less generic-sounding names while we're at it. Original export patch, along with the suggestion about the nomenclature, from Stephen Rothwell. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] cfi_cmdset_0001: Timeouts for erase, write and unlock operationsAnders Grafström2008-08-061-14/+38
| | | | | | | | | | | | | | | | | | Timeouts are currently given by the typical operation time times 8. It works in the general well-behaved case but not when an erase block is failing. For erase operations, it seems that a failing erase block will keep the device state machine in erasing state until the vendor specified maximum timeout period has passed. By this time the driver would have long since timed out, left erasing state and attempted further operations which all fail. This patch implements timeouts using values from the CFI Query structure when available. The patch also sets a longer timeout for locking operations. The current value used for locking/unlocking given by 1000000/HZ microseconds is too short for devices like J3 and J5 Strataflash which have a typical clear lock-bits time of 0.5 seconds. Signed-off-by: Anders Grafström <grfstrm@users.sourceforge.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] Add qry_mode_on()/qry_omde_off() to deal with odd chipsAlexey Korolev2008-08-062-49/+65
| | | | | | | | | | | | | | | | | | | | | | | | | There are some CFI chips which require non standard procedures to get into QRY mode. The possible way to support them would be trying different modes till QRY will be read. This patch introduce two new functions qry_mode_on qry_mode_off. qry_mode_on tries different commands in order switch chip into QRY mode. So if we have one more "odd" chip - we just could add several lines to qry_mode_on. Also using these functions remove unnecessary code duplicaton in porbe procedure. Currently there are two "odd" cases 1. Some old intel chips which require 0xFF before 0x98 2. ST M29DW chip which requires 0x98 to be sent at 0x555 (according to CFI should be 0x55) This patch is partialy based on the patch from Uwe (see "[PATCH 2/4] [RFC][MTD] cfi_probe: remove Intel chip workaround" thread ) Signed-off-by: Alexey Korolev <akorolev@infradead.org> Signed-off-by: Alexander Belyakov <abelyako@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] Add "Spansion" to MTD_CFI_AMDSTD kconfig menu descriptionGeorge G. Davis2008-08-061-1/+1
| | | | | | | | | This long overdue trivial change to the MTD_CFI_AMDSTD kconfig menu description is intended to help clarify that this option also supports Spansion flash devices. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] Use DIV_ROUND_UPJulia Lawall2008-08-022-2/+2
| | | | | | | | The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] dataflash OTP supportDavid Brownell2008-08-011-0/+1
| | | | | | | | | | | | | | | Now that we can tell when we have one of the newer DataFlash chips, optionally expose the 128 bytes of OTP memory they provide. Tested on at45db642 revision B and D chips. Switch mtdchar over to a generic HAVE_MTD_OTP flag instead of adding another #ifdef for each type of chip whose driver has OTP support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Bryan Wu <cooloney@kernel.org> Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device IDJerry Hicks2008-07-311-1/+1
| | | | | | | | | | | | | | The device id for Am29DL800BB in jedec_probe.c is wrong. Reference: http://www.spansion.com/datasheets/21519c4.pdf I discovered this while working with u-boot. The u-boot folks mentioned Linux as an upstream reference, thought I'd post a heads-up here too. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] jedec_probe: Fix SST 16-bit chip detectionAtsushi Nemoto2008-07-251-4/+10
| | | | | | | | | | | The unlock_addr rework in kernel 2.6.25 breaks 16-bit SST chips. SST 39LF160 and SST 39VF1601 are both 16-bit only chip (do not have BYTE# pin) and new uaddr value is not correct for them. Add MTD_UADDR_0xAAAA_0x5555 for those chips. Tested with SST 39VF1601 chip. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] Fix -ETIMEO errors in CFI driverAlexey Korolev2008-07-251-1/+8
| | | | | | | | | | | | | | | | | | | | | Existing CFI driver has problems with excessive writes during erase. If CFI driver does many writes during one erase cycle we may face the messages with -ETIMEO error on erase operation. It may cause the following data corruption and kernel panics. The reason of the issue is related to specifics of suspend operation: if we write to flash during erase, suspend operation will cost some time to erase procedure (for P30 it could be significant). In current version of cfi driver the problem of many suspends is partially workarounded by adding some time reserv to any operation (8xerase_time) but if we have many writes during one erase the problem appears. This patch detects the suspend and resets timer if suspend occured. It has been well verified on different chips. No problems were found. Could you please include the patch as it is simple and fixes bad issue. Signed-off-by: Alexey Korolev <akorolev@infradead.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] gen_probe: No debug message when debugging is disabledJean Delvare2008-07-111-2/+2
| | | | | | | | | Use pr_debug(...) instead of printk(KERN_DEBUG ...) so that the message is only printed when debugging is enabled. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: John stoffel <john@stoffel.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* MTD/JFFS2: remove CVS keywordsAdrian Bunk2008-06-0411-18/+0
| | | | | | | | | | | | Once upon a time, the MTD repository was using CVS. This patch therefore removes all usages of the no longer updated CVS keywords from the MTD code. This also includes code that printed them to the user. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] Add support for Eon EN29SL800B[BT] NOR flash chipsMike Rapoport2008-06-041-0/+35
| | | | | | | | | This patch add support for non-CFI Eon EN29SL800B[BT] NOR flash chips. The Eon chips have manufacturer ID in the first bank, therefore this patch depends on support for flash chips with ID in bank other than 0. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] Add support for flash chips with ID in bank other than 0Mike Rapoport2008-06-041-3/+16
| | | | | | | | | | According to JEDEC "Standard Manufacturer's Identification Code" (http://www.jedec.org/download/search/jep106W.pdf) several first banks of NOR flash can contain 0x7f instead of actual ID. This patch adds support for reading manufacturer ID from banks other than 0. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] Add support for AMD AM29SL800D[BT] NOR flash chipsMike Rapoport2008-06-041-0/+32
| | | | | Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] Support for M50FLW080A and M50FLW080BNate Case2008-05-142-0/+36
| | | | | | | | | Add support for M50FLW080A and M50FLW080B revisions of LPC flash devices. Signed-off-by: Aaron Lindner <alindner@xes-inc.com> Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] Remove cfi_cmdset_0001.c erase suspend fixup typoAlexander Belyakov2008-05-061-1/+1
| | | | | | | | | | | Fix typo in erase suspend while write fixup code leading to compile time error if CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE was defined. drivers/mtd/chips/cfi_cmdset_0001.c: In function 'fixup_intel_strataflash': drivers/mtd/chips/cfi_cmdset_0001.c:212: error: 'struct cfi_pri_amdstd' has no member named 'SuspendCmdSupport' Signed-off-by: Alexander Belyakov <abelyako@googlemail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD][NOR] Add physical address to point() methodJared Hulbert2008-05-011-6/+8
| | | | | | | | | | | | Adding the ability to get a physical address from point() in addition to virtual address. This physical address is required for XIP of userspace code from flash. Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] Fix Intel CFI driver for collie flashThomas Kunze2008-04-231-0/+3
| | | | | | | | | | | collie seems to contain LH28F640BF flash chips. According to http://sharp-world.com/products/device/flash/pdf/*FUM00701*@E.pdf (page 83) if they have 0x51 of Extended Query Table (number of hardware partitions) set to zero, they have a single fixed partition. This patch makes those chips work. Signed-off-by: Thomas Kunze <thommycheck@gmx.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] Fixup for incorrect CFI data in Spansion S29GL064/32N flash chipsTrent Piepho2008-04-221-0/+26
| | | | | | | | | | | | | | | | | | | This is a known erratum confirmed by Spansion. I have an errata document, but I can't find a link to it anywhere on their site to include here. Some of the S29GL064N chips report 64 sectors when they should report 128, and some of S29GL032N chips report 127 sectors when they should report 63. Note that when the chip dies are fixed by Spansion, they will still have the same id. The fix is done in such a way that it won't affect corrected chips. The fixups use the extended id made available by a previous patch. Without that, virtually all newer AMD/Spansion chips will have the same ID (0x227e) and it's not possible to apply the fixup to the correct chips. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] Read extended device ID from AMD/Spansion CFI flash chipsTrent Piepho2008-04-221-0/+5
| | | | | | | | | | | | | | | AMD/Spansion use a device id of 0x7e to indicate an extended device is present at offset 0xe and 0xf in the query data. I've verified with Spansion that all their chips (mfr == 0x01) with an id of 0x7e use it to indicate an extended id is present. What's more, there are no chips with a NON-extended id that is the same as a different chip's extended id. In other words, when the extended ID is present, one can replace the normal id with the extended id without losing any information. Which is what I've done. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] Add JEDEC support for the SST 36VF3203 flash chipAndrei Dolnikov2008-04-221-0/+13
| | | | | | | | Add support for the SST 36VF3203 flash chip. It is used on Emerson KSI8560 board. Signed-off-by: Andrei Dolnikov <adolnikov@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] XIP: Use generic xip_iprefetch() instead of asm volatile (...)Paulius Zaleckas2008-04-224-6/+6
| | | | | | | | | Untested, but shouldn't break anything... Makes MTD_XIP arch independent. I guess this is why xip_iprefetch() was made for. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] cfi_cmdset_0020.c: make a function staticAdrian Bunk2008-04-221-1/+2
| | | | | | | This patch makes the needlessly global cfi_staa_erase_varsize() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
OpenPOWER on IntegriCloud