summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-03-272-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull "ARM: driver specific updates" from Arnd Bergmann: "These are all specific to some driver. They are typically the platform side of a change in the drivers directory, such as adding a new driver or extending the interface to the platform. In cases where there is no maintainer for the driver, or the maintainer prefers to have the platform changes in the same branch as the driver changes, the patches to the drivers are included as well. A much smaller set of driver updates that depend on other branches getting merged first will be sent later. The new export of tegra_chip_uid conflicts with other changes in fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED conflicts with the cleanup of the interrupt handling of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up aforementioned trivial conflicts. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci mmc: sdhci-s3c: add platform data for the second capability ARM: SAMSUNG: support the second capability for samsung-soc ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1 ARM: EXYNOS: Enable MDMA driver regulator: Remove bq24022 regulator driver rtc: sa1100: add OF support pxa: magician/hx4700: Convert to gpio-regulator from bq24022 ARM: OMAP3+: SmartReflex: fix error handling ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API ARM: OMAP3+: SmartReflex: micro-optimization for sanity check ARM: OMAP3+: SmartReflex: misc cleanups ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata() ARM: OMAP3+: hwmod: add SmartReflex IRQs ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register ARM: OMAP3+: SmartReflex: Add a shutdown hook ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP ... Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-tegra/fuse.c drivers/rtc/rtc-sa1100.c
| * Merge branch 'next/fixes-non-critical' into next/driversArnd Bergmann2012-03-208-23/+36
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-lpc32xx/clock.c arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c The conflicts with pxa are non-obvious, we have multiple branches adding and removing the same clock settings. According to Haojian Zhuang, removing the sa1100 rtc dummy clock is the correct fix here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * \ Merge branch 'next/devel-samsung-mmc' of ↵Olof Johansson2012-03-131-3/+3
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers * 'next/devel-samsung-mmc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci mmc: sdhci-s3c: add platform data for the second capability ARM: SAMSUNG: support the second capability for samsung-soc
| | * | mmc: sdhci-s3c: add platform data for the second capabilityJaehoon Chung2012-03-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is added host_caps2 in sdhci-s3c.c It's necessary that use the second capabilities. And removed the duplicated host_caps. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | Merge branch 'lpc32xx/drivers' into next/driversArnd Bergmann2012-02-2218-132/+241
| |\ \ \ | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | * lpc32xx/drivers: (566 commits) ARM: LPC32xx: ADC support for mach-lpc32xx Includes an update to Linux 3.3-rc4 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | Merge branch 'features/imx-clk-prepare' of ↵Olof Johansson2012-02-081-3/+3
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.pengutronix.de/git/imx/linux-2.6 into next/drivers * 'features/imx-clk-prepare' of git://git.pengutronix.de/git/imx/linux-2.6: mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare i2c: imx: add clk_prepare/clk_unprepare serial: imx: add clk_prepare/clk_unprepare ARM: mx31moboard: add clk_prepare/clk_unprepare ARM: pm-imx5: add clk_prepare/clk_unprepare ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare ARM: mxc: arch_reset: add clk_prepare/clk_unprepare ARM: mxc: epit: add clk_prepare/clk_unprepare ARM: mxc: pwm: add clk_prepare/clk_unprepare ARM: mxc: ahci: add clk_prepare/clk_unprepare ARM: mxc: time: add clk_prepare/clk_unprepare
| | * | | mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepareRichard Zhao2012-02-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's for migrating to generic clk framework API. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | | | | Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-03-272-2/+1
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull "ARM: global cleanups" from Arnd Bergmann: "Quite a bit of code gets removed, and some stuff moved around, mostly the old samsung s3c24xx stuff. There should be no functional changes in this series otherwise. Some cleanups have dependencies on other arm-soc branches and will be sent in the second round. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up trivial conflicts mainly due to #include's being changes on both sides. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits) ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver ARM: EXYNOS: add clock registers for exynos4x12-cpufreq PM / devfreq: update the name of EXYNOS clock registers that were omitted PM / devfreq: update the name of EXYNOS clock register ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock ARM: EXYNOS: use static declaration on regarding clock ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs ARM: OMAP2+: Fix build error after merge ARM: S3C24XX: remove call to s3c24xx_setup_clocks ...
| * \ \ \ \ Merge branch 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6 ↵Arnd Bergmann2012-03-158-23/+36
| |\ \ \ \ \ | | | |_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/cleanup * 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6: ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file (update to v3.3-rc7) Conflicts: arch/arm/mach-s3c2440/common.h
| * | | | | Merge branch 'next/cleanup-s3c24xx' of ↵Olof Johansson2012-03-081-1/+1
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup * 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits) ARM: S3C24XX: remove call to s3c24xx_setup_clocks ARM: S3C24XX: add get_rate for clk_p on S3C2416/2443 ARM: S3C24XX: add get_rate for clk_h on S3C2416/2443 ARM: S3C24XX: remove XXX_setup_clocks method from S3C2443 ARM: S3C24XX: remove obsolete S3C2416_DMA option ARM: S3C24XX: Reuse S3C2443 dma for S3C2416 ARM: S3C24XX: Fix indentation of dma-s3c2443 ARM: S3C24XX: Move device setup files to mach directory ARM: S3C24XX: Consolidate Simtec extensions ARM: S3C24XX: move simtec-specific code to mach directory ARM: S3C24XX: Move common-smdk code to mach directory ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx ARM: s3c2410_defconfig: update s3c2410_defconfig ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/ ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/ ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/ ARM: S3C2412: move mach-s3c2412/* into mach-s3c24xx/ ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/ ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX ARM: S3C2410: move s3c2410_baseclk_add to clock.h ...
| | * \ \ \ \ Merge branch 'topic/cleanup-s3c24xx' into next/cleanup-s3c24xxKukjin Kim2012-03-071-1/+1
| | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-s3c24xx/include/mach/system.h
| | | * | | | | ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XXKukjin Kim2012-03-031-1/+1
| | | | |_|/ / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, and S3C2450 SoCs so that we can merge the mach-xxx directories and plat-s3c24xx dir. to just one mach-s3c24xx for them. I think this should be sent to upstream via samsung tree because this touches many samsung stuff. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> [for the gadget part:] Acked-by: Felipe Balbi <balbi@ti.com> [for the framebuffer (video) part:] Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> [For the watchdog-part:] Acked-by: Wim Van Sebroeck <wim@iguana.be> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | | Merge branch 'cleanup-3.4' of git://github.com/hzhuang1/linux into next/cleanupArnd Bergmann2012-02-2818-132/+241
| |\ \ \ \ \ \ | | |_|_|_|/ / | |/| | | | / | | | |_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | * 'cleanup-3.4' of git://github.com/hzhuang1/linux: (2 commits) rtc: sa1100: remove verification code of alarm rtc: sa1100: remove periodic code (update to v3.3-rc5)
| * | | | | ARM: at91: code removal of CAP9 SoCJean-Christophe PLAGNIOL-VILLARD2012-02-031-1/+0
| | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following removal announce and addition to feature-removal-schedule.txt, here is the actual source code deletion for Atmel CAP9 family. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | | | | Merge tag 'module-for-3.4' of ↵Linus Torvalds2012-03-241-1/+0
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull cleanup of fs/ and lib/ users of module.h from Paul Gortmaker: "Fix up files in fs/ and lib/ dirs to only use module.h if they really need it. These are trivial in scope vs the work done previously. We now have things where any few remaining cleanups can be farmed out to arch or subsystem maintainers, and I have done so when possible. What is remaining here represents the bits that don't clearly lie within a single arch/subsystem boundary, like the fs dir and the lib dir. Some duplicate includes arising from overlapping fixes from independent subsystem maintainer submissions are also quashed." Fix up trivial conflicts due to clashes with other include file cleanups (including some due to the previous bug.h cleanup pull). * tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: lib: reduce the use of module.h wherever possible fs: reduce the use of module.h wherever possible includecheck: delete any duplicate instances of module.h
| * | | | | includecheck: delete any duplicate instances of module.hPaul Gortmaker2012-02-281-1/+0
| | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different tree maintainers picked up independently generated trivial compile fixes based on linux-next testing, resulting in some cases where a file would have got more than one addition of module.h once everything was all merged together. Delete any duplicates so includecheck isn't complaining about anything related to module.h/export.h changes. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | | | | Merge branch 'amba' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2012-03-232-68/+125
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull #2 ARM updates from Russell King: "Further ARM AMBA primecell updates which aren't included directly in the previous commit. I wanted to keep these separate as they're touching stuff outside arch/arm/." * 'amba' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver ARM: 7335/1: mach-u300: do away with MMC config files ARM: 7280/1: mmc: mmci: Cache MMCICLOCK and MMCIPOWER register ARM: 7309/1: realview: fix unconnected interrupts on EB11MP ARM: 7230/1: mmc: mmci: Fix PIO read for small SDIO packets ARM: 7227/1: mmc: mmci: Prepare for SDIO before setting up DMA job ARM: 7223/1: mmc: mmci: Fixup use of runtime PM and use autosuspend ARM: 7221/1: mmc: mmci: Change from using legacy suspend ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction ARM: 7217/1: mmc: mmci: Put power register deviations in variant data ARM: 7216/1: mmc: mmci: Do not release spinlock in request_end ARM: 7215/1: mmc: mmci: Increase max_segs from 16 to 128
| * \ \ \ \ Merge branch 'mmci' into ambaRussell King2012-03-242-57/+124
| |\ \ \ \ \
| | * | | | | ARM: 7280/1: mmc: mmci: Cache MMCICLOCK and MMCIPOWER registerUlf Hansson2012-02-022-13/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of reading a register value everytime we need to apply a new value for it, maintain a cached copy for it. This also means we are able to skip writes that are not needed. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | ARM: 7230/1: mmc: mmci: Fix PIO read for small SDIO packetsUlf Hansson2012-01-201-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Corrects a bug in MMCI host driver which silently causes small reads (< 4 bytes as only used in SDIO) from PL-18X to fail. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | ARM: 7227/1: mmc: mmci: Prepare for SDIO before setting up DMA jobUlf Hansson2012-01-201-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the SDIO preparation to be done before the DMA job is setup. This makes it possible to do DMA for SDIO transfers as well as the earlier supported pio mode. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | ARM: 7223/1: mmc: mmci: Fixup use of runtime PM and use autosuspendUlf Hansson2012-01-201-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added use of runtime PM autosuspend feature, with a fixed timeout of 50 ms. This will prevent adding a latency, although very minor, for _every_ request. Moreover the runtime_get_sync is now also used in set_ios and suspend since the runtime resourses are needed here as well. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | ARM: 7221/1: mmc: mmci: Change from using legacy suspendUlf Hansson2012-01-201-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch switch from using the legacy suspend/resume to the new way of registering PM callbacks. No functional change is done. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handlerUlf Hansson2012-01-201-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The purpose of the vdd_handler does not make sense. We remove it and use a generic approach instead. A new ios_handler is added, the purpose of which e.g. can be to control GPIO pins to a levelshifter. Previously the vdd_handler was also used for making additional changes to the power register bits. This option is superfluous and is therefore removed. Adaptaptions from the old vdd_handler to the new ios_handler is done for mach-ux500 board, which was the only one using the vdd_handler. This patch is based upon a patch from Sebastian Rasmussen. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | ARM: 7218/1: mmc: mmci: Provide option to configure bus signal directionUlf Hansson2012-01-202-10/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ST Micro variant supports bus signal direction indication. A new member in the variant struct is added for this. Moreover the actual signal direction configuration is board specific, thus the amba mmci platform data is extended with a new member to be able provide mmci with these specific board configurations. This patch is based upon a patch from Sebastian Rasmussen. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | ARM: 7217/1: mmc: mmci: Put power register deviations in variant dataUlf Hansson2012-01-201-5/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use variant data to store hardware controller deviations concerning power registers to improve readability of the code. Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com> Tested-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | ARM: 7216/1: mmc: mmci: Do not release spinlock in request_endUlf Hansson2012-01-201-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "mmc: core: move ->request() call from atomic context", is the reason to why this change is possible. This simplifies the error handling code execution path quite a lot and potentially also fixes some error handling hang problems. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | ARM: 7215/1: mmc: mmci: Increase max_segs from 16 to 128Ulf Hansson2012-01-201-1/+1
| | | |_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A significant increase (10-20%) in performance throughput for USB mass storage is the reason for incrementing the value. By some reason the USB driver allocates buffers which requires a scattergather list to contain a lot more than 16 elements to get optimal performance. This change sets the maximum elements to 128. Tests with large reads and large writes (100 MiB) show that the throughput increase is significant for write (10% for this test) but not for read. Tests are run on a Linux host with ext4 FS on the gadget mass storage device. The sg-len still exceeds 16 for the read tests but the performance gain is low or nothing. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driverviresh kumar2012-03-161-11/+1
| | |_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For simple modules that contain a single amba_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_amba_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | Merge branch 'for-armsoc' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2012-03-231-1/+1
|\ \ \ \ \ | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull #1 ARM updates from Russell King: "This one covers stuff which Arnd is waiting for me to push, as this is shared between both our trees and probably other trees elsewhere. Essentially, this contains: - AMBA primecell device initializer updates - mostly shrinking the size of the device declarations in platform code to something more reasonable. - Getting rid of the NO_IRQ crap from AMBA primecell stuff. - Nicolas' idle cleanups. This in combination with the restart cleanups from the last merge window results in a great many mach/system.h files being deleted." Yay: ~80 files, ~2000 lines deleted. * 'for-armsoc' of git://git.linaro.org/people/rmk/linux-arm: (60 commits) ARM: remove disable_fiq and arch_ret_to_user macros ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER ARM: rpc: make default fiq handler run-time installed ARM: make arch_ret_to_user macro optional ARM: amba: samsung: use common amba device initializers ARM: amba: spear: use common amba device initializers ARM: amba: nomadik: use common amba device initializers ARM: amba: u300: use common amba device initializers ARM: amba: lpc32xx: use common amba device initializers ARM: amba: netx: use common amba device initializers ARM: amba: bcmring: use common amba device initializers ARM: amba: ep93xx: use common amba device initializers ARM: amba: omap2: use common amba device initializers ARM: amba: integrator: use common amba device initializers ARM: amba: realview: get rid of private platform amba_device initializer ARM: amba: versatile: get rid of private platform amba_device initializer ARM: amba: vexpress: get rid of private platform amba_device initializer ARM: amba: provide common initializers for static amba devices ARM: amba: make use of -1 IRQs warn ARM: amba: u300: get rid of NO_IRQ initializers ...
| * | | | ARM: amba: make irq 0 invalidRussell King2012-01-251-1/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | Fix core bus and MMCI such that irq 0 means that there is no IRQ attached. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2012-03-211-1/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile 1 from Al Viro: "This is _not_ all; in particular, Miklos' and Jan's stuff is not there yet." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits) ext4: initialization of ext4_li_mtx needs to be done earlier debugfs-related mode_t whack-a-mole hfsplus: add an ioctl to bless files hfsplus: change finder_info to u32 hfsplus: initialise userflags qnx4: new helper - try_extent() qnx4: get rid of qnx4_bread/qnx4_getblk take removal of PF_FORKNOEXEC to flush_old_exec() trim includes in inode.c um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it um: embed ->stub_pages[] into mmu_context gadgetfs: list_for_each_safe() misuse ocfs2: fix leaks on failure exits in module_init ecryptfs: make register_filesystem() the last potential failure exit ntfs: forgets to unregister sysctls on register_filesystem() failure logfs: missing cleanup on register_filesystem() failure jfs: mising cleanup on register_filesystem() failure make configfs_pin_fs() return root dentry on success configfs: configfs_create_dir() has parent dentry in dentry->d_parent configfs: sanitize configfs_create() ...
| * | | | debugfs-related mode_t whack-a-moleAl Viro2012-03-201-1/+1
| | |_|/ | |/| | | | | | | | | | | | | | | | | | all of those should be umode_t... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | | Merge tag 'pm-for-3.4' of ↵Linus Torvalds2012-03-212-0/+10
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates for 3.4 from Rafael Wysocki: "Assorted extensions and fixes including: * Introduction of early/late suspend/hibernation device callbacks. * Generic PM domains extensions and fixes. * devfreq updates from Axel Lin and MyungJoo Ham. * Device PM QoS updates. * Fixes of concurrency problems with wakeup sources. * System suspend and hibernation fixes." * tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (43 commits) PM / Domains: Check domain status during hibernation restore of devices PM / devfreq: add relation of recommended frequency. PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on() PM / shmobile: Make CMT driver use pm_genpd_dev_always_on() PM / shmobile: Make TMU driver use pm_genpd_dev_always_on() PM / Domains: Introduce "always on" device flag PM / Domains: Fix hibernation restore of devices, v2 PM / Domains: Fix handling of wakeup devices during system resume sh_mmcif / PM: Use PM QoS latency constraint tmio_mmc / PM: Use PM QoS latency constraint PM / QoS: Make it possible to expose PM QoS latency constraints PM / Sleep: JBD and JBD2 missing set_freezable() PM / Domains: Fix include for PM_GENERIC_DOMAINS=n case PM / Freezer: Remove references to TIF_FREEZE in comments PM / Sleep: Add more wakeup source initialization routines PM / Hibernate: Enable usermodehelpers in hibernate() error path PM / Sleep: Make __pm_stay_awake() delete wakeup source timers PM / Sleep: Fix race conditions related to wakeup source timer function PM / Sleep: Fix possible infinite loop during wakeup source destruction PM / Hibernate: print physical addresses consistently with other parts of kernel ...
| * \ \ \ Merge branch 'pm-qos'Rafael J. Wysocki2012-03-162-0/+10
| |\ \ \ \ | | |_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | * pm-qos: sh_mmcif / PM: Use PM QoS latency constraint tmio_mmc / PM: Use PM QoS latency constraint PM / QoS: Make it possible to expose PM QoS latency constraints
| | * | | sh_mmcif / PM: Use PM QoS latency constraintRafael J. Wysocki2012-03-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sh_mmcif call dev_pm_qos_expose_latency_limit() to expose the PM QoS latency limit to user space and specify the initial value of it as 100 microseconds. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
| | * | | tmio_mmc / PM: Use PM QoS latency constraintRafael J. Wysocki2012-03-131-0/+5
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | Make tmio_mmc call dev_pm_qos_expose_latency_limit() to expose the PM QoS latency limit to user space and specify the initial value of it as 100 microseconds. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2012-03-201-2/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...
| * | | | mmc: Fix typo in s3cmci.cMasanari Iida2012-02-051-2/+2
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | Correct typo "resouce" to "resource" in drivers/mmc/host/s3cmci.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds2012-03-201-7/+3
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull TTY/serial patches from Greg KH: "tty and serial merge for 3.4-rc1 Here's the big serial and tty merge for the 3.4-rc1 tree. There's loads of fixes and reworks in here from Jiri for the tty layer, and a number of patches from Alan to help try to wrestle the vt layer into a sane model. Other than that, lots of driver updates and fixes, and other minor stuff, all detailed in the shortlog." * tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits) serial: pxa: add clk_prepare/clk_unprepare calls TTY: Wrong unicode value copied in con_set_unimap() serial: PL011: clear pending interrupts serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset. vt: NULL dereference in vt_do_kdsk_ioctl() tty: serial: vt8500: fix annotations for probe/remove serial: remove back and forth conversions in serial_out_sync serial: use serial_port_in/out vs serial_in/out in 8250 serial: introduce generic port in/out helpers serial: reduce number of indirections in 8250 code serial: delete useless void casts in 8250.c serial: make 8250's serial_in shareable to other drivers. serial: delete last unused traces of pausing I/O in 8250 pch_uart: Add module parameter descriptions pch_uart: Use existing default_baud in setup_console pch_uart: Add user_uartclk parameter pch_uart: Add Fish River Island II uart clock quirks pch_uart: Use uartclk instead of base_baud mpc5200b/uart: select more tolerant uart prescaler on low baudrates tty: moxa: fix bit test in moxa_start() ...
| * | | TTY: remove re-assignments to tty_driver membersJiri Slaby2012-03-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | Merge tag 'tty-3.3-rc3' tty-nextGreg Kroah-Hartman2012-02-101-6/+3
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed to handle the 8250 file merge mess properly for future patches. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | TTY: use tty_standard_installJiri Slaby2012-02-021-6/+3
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the helper in the rest of the tty drivers. This is a simple replacement. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | mmc: core: Fixup suspend/resume issues for UHS-I cardsUlf Hansson2012-03-044-5/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even if cards supports 1.8V I/O voltage those should anyway be initialized at 3.3V I/O according to (e)MMC, SD and SDIO specs. Some eMMC and embedded SDIO devices are able to be initialized at 1.8V as well, but it is better to be safe. Do note that initialization in this context means that the card has been completely powered off, otherwise the card will remain at the last I/O voltage level that were negotitiated. Due to the above being taken care of the suspend/resume issues for UHS-I SD-cards has been fixed. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | | | mmc: mmci: reduce max_blk_count to avoid overflowing max_req_sizeWill Deacon2012-03-041-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a system with large pages (64k in my case), the following BUG is triggered in MMC core: [ 2.338023] BUG: failure at drivers/mmc/core/core.c:221/mmc_start_request()! [ 2.338102] Kernel panic - not syncing: BUG! [ 2.338155] Call trace: [ 2.338228] [<ffffffc00008635c>] dump_backtrace+0x0/0x120 [ 2.338317] [<ffffffc0003365ec>] dump_stack+0x14/0x1c [ 2.338403] [<ffffffc000336990>] panic+0xbc/0x1f0 [ 2.338498] [<ffffffc00027a494>] mmc_start_request+0x154/0x184 [ 2.338600] [<ffffffc00027abdc>] mmc_start_req+0x110/0x140 [ 2.338701] [<ffffffc00028604c>] mmc_blk_issue_rw_rq+0x7c/0x39c [ 2.338804] [<ffffffc00028652c>] mmc_blk_issue_rq+0x1c0/0x468 [ 2.338905] [<ffffffc000287564>] mmc_queue_thread+0x68/0x118 [ 2.338995] [<ffffffc0000bc308>] kthread+0x84/0x8c This is because of a 64k request with a max_req_size of 64k-1 bytes. The following patch fixes the problem by limiting the max_blk_count such that max_blk_count * max_blk_size == max_req_size. I couldn't pursuade the compiler to emit a shift instead of a div without encoding the shift explicitly. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | | | mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5Sascha Hauer2012-03-041-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION command. This works for SD cards. However, with MMC cards the MMC_SET_BLOCK_COUNT command is used instead, but this needs the same handling. Fix MMC cards by testing for the MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53 board with a Transcend MMC+ card and eMMC. The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this is a regression for these boards introduced in 3.0; it should go to 3.0/3.1/3.2-stable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | | | mmc: core: fix regression: set default clock gating delay to 0Guennadi Liakhovetski2012-03-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recent commit "mmc: core: Use delayed work in clock gating framework" (597dd9d79cfbbb1) introduced a default 200ms delay before clock gating actually takes place. This means that every time an MMC interface becomes idle it first stays on for 200ms before gating its clock. This leads to increased power consumption and is therefore a clear regression. This patch restores the original behaviour by setting the default delay to 0. Users prioritising throughput over power efficiency can still modify the delay via sysfs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* | | | mmc: atmel-mci: don't use dma features when using DMA with no chan availableLudovic Desroches2012-03-021-11/+10
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some callbacks are set too early -- i.e. we can have dma capabilities but we can't get a dma channel. So wait to get the dma channel before setting callbacks and change logs consequently. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [Should be applied to 3.2-stable.] Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | | mmc: dw_mmc: Fix PIO mode with support of highmemSeungwon Jeon2012-02-131-69/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [<c0358824>] lr : [<c035988c>] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [<c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<c035988c>] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [<c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<c0359b24>] (dw_mci_interrupt+0xfc/0x4a4) [<c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4) [<c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<c00c48b4>] (handle_irq_event+0x44/0x64) [<c00c4870>] (handle_irq_event+0x0/0x64) from [<c00c7358>] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [<c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<c00c4258>] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [<c00c4228>] (generic_handle_irq+0x0/0x38) from [<c004241c>] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [<c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<c0048bc0>] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | | mmc: atmel-mci: save and restore sdioirq when soft reset is performedLudovic Desroches2012-02-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes a software reset is needed. Then some registers are saved and restored but the interrupt mask register is missing. It causes issues with sdio devices whose interrupts are masked after reset. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
OpenPOWER on IntegriCloud