summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2012-04-261-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Pull [GIT PULL] slave-dmaengine fixes from Vinod Koul. * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine/amba-pl08x : reset phychan_hold on terminate all dma: pl330: fix a couple of compilation warnings dma/ste_dma40: fix erroneous comparison dma/ste_dma40: explicitly include regulator consumer header dma40: Improve the logic of stopping logical chan dmaengine: at_hdmac: remove clear-on-read in atc_dostart() dma: mxs-dma: enable channel in device_issue_pending call dmaengine: imx-dma: dont complete descriptor for cyclic dma
| * dma: mxs-dma: enable channel in device_issue_pending callShawn Guo2012-04-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable channel in device_issue_pending call, so that the order between cookie assignment and channel enabling can be ensured naturally. It fixes the mxs gpmi-nand breakage which is caused by the incorrect order of cookie assigning and channel enabling. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Huang Shijie <b32955@freescale.com> Tested-by <samgandhi9@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
* | mmc: core: Do not pre-claim host in suspendUlf Hansson2012-04-201-35/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since SDIO drivers may want to do some SDIO operations in their suspend callback functions, we must not keep the host claimed when calling them. Daniel Drake reported that libertas_sdio encountered a deadlock in its suspend function. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Tested-by: Daniel Drake <dsd@laptop.org> [stable@: please apply to 3.2-stable and 3.3-stable] Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: dw_mmc: prevent NULL dereference for dma_opsJaehoon Chung2012-04-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Now, dma_ops is assumed that use the IDMAC. But if dma_ops is assigned the pdata->dma_ops, we didn't ensure that callback function is defined. If the callback isn't defined, then we should run in PIO mode. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: unbreak sdhci-esdhc-imx on i.MX25Eric Bénard2012-04-201-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | This was broken by me in 37865fe91582582a6f6c00652f6a2b1ff71f8a78 ("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more extensive tests would have shown that read or write of data to the card were failing (even if the partition table was correctly read). Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: cd-gpio: Include header to pickup exported symbol prototypesH Hartley Sweeten2012-04-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include the linux/mmc/cd-gpio.h header to pickup the prototypes for the two exported symbols. This quiets the sparse warnings: warning: symbol 'mmc_cd_gpio_request' was not declared. Should it be static? warning: symbol 'mmc_cd_gpio_free' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sdhci: refine non-removable card checking for card detectionDaniel Drake2012-04-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c79396c191bc19 ("mmc: sdhci: prevent card detection activity for non-removable cards") disables card detection where the cards are marked as non-removable. This makes sense, but the implementation detail of calling mmc_card_is_removable() causes some problems, because mmc_card_is_removable() is overloaded with CONFIG_MMC_UNSAFE_RESUME semantics. In the OLPC XO case, we need CONFIG_MMC_UNSAFE_RESUME because our root filesystem is stored on SD, but we also have external SD card slots where we want automatic card detection. Refine the check to only apply to hosts marked as MMC_CAP_NONREMOVABLE, which is defined to mean that the card is *really* nonremovable. This could be revisited in future if we find a way to improve CONFIG_MMC_UNSAFE_RESUME semantics. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Chuanxiao Dong <chuanxiao.dong@intel.com> [stable@: please apply to 3.3-stable] Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: dw_mmc: Fix switch from DMA to PIOSeungwon Jeon2012-04-201-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | When dw_mci_pre_dma_transfer returns failure in some reasons, dw_mci_submit_data will prepare to switch the PIO mode from DMA. After switching to PIO mode, DMA(IDMAC in particular) is still enabled. This makes the corruption in handling interrupt and the driver lock-up. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: remove MMC bus legacy suspend/resume methodChuanxiao Dong2012-04-202-17/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MMC bus is using legacy suspend/resume method, which is not compatible if runtime pm callbacks are used. In this scenario, MMC bus suspend/resume callbacks cannot be called when system entering S3. So change to use the new defined dev_pm_ops for system sleeping mode. Tested on AM335x Platform. Solves major issue/crash reported at http://www.mail-archive.com/linux-omap@vger.kernel.org/msg65425.html Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Tested-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: omap_hsmmc: Get rid of of_have_populated_dt() usageRajendra Nayak2012-04-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_have_populated_dt() is not expected to be used in drivers but instead only in early platform init code. Drivers on the other hand should rely on dev->of_node or of_match_device(). Besides usage of of_have_populated_dt() also throws up build error as below which was reported by Balaji TK, when omap_hsmmc is built as a module. ERROR: "allnodes" [drivers/mmc/host/omap_hsmmc.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 So get rid of all of_have_populated_dt() usage in omap_hsmmc driver and instead use dev->of_node to make the same dicisions as earlier. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reported-by: Benoit Cousson <b-cousson@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: omap_hsmmc: build fix for CONFIG_OF=y and CONFIG_MMC_OMAP_HS=mChris Ball2012-04-201-1/+1
| | | | | | | | | | | | | | | | | | | | Commit 46856a68dc ("mmc: omap_hsmmc: Convert hsmmc driver to use device tree") introduced in 3.4-rc1 has a missing semi-colon, causing: drivers/mmc/host/omap_hsmmc.c:1745: error: expected ',' or ';' before 'extern' Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: fixes for eMMC v4.5 sanitize operationAdrian Hunter2012-04-202-16/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | eMMC v4.5 sanitize operation erases all copies of unmapped data. However trim or erase operations must be used first to unmap the required sectors. That was not being done. Fixes apply to linux 3.2 on. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: <stable@vger.kernel.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: fixes for eMMC v4.5 discard operationAdrian Hunter2012-04-202-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | eMMC v4.5 discard operation is significantly different from the existing trim operation because it is not guaranteed to work with the new sanitize operation. Consequently mmc_can_trim() is separated from mmc_can_discard(). Also the new discard operation does not result in the sectors being set to all-zeros, so discard_zeroes_data must not be set. In addition, the new discard has the same timeout as trim, but from v4.5 trim is defined to use the hc timeout. The timeout calculation is adjusted accordingly. Fixes apply to linux 3.2 on. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: <stable@vger.kernel.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: use really long write timeout to deal with crappy cardsPaul Walmsley2012-04-051-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several people have noticed that crappy SD cards take much longer to complete multiple block writes than the 300ms that Linux specifies. Try to work around this by using a three second write timeout instead. This is a generalized version of a patch from Chase Maupin <Chase.Maupin@ti.com>, whose patch description said: * With certain SD cards timeouts like the following have been seen due to an improper calculation of the dto value: mmcblk0: error -110 transferring data, sector 4126233, nr 8, card status 0xc00 * By removing the dto calculation and setting the timeout value to the maximum specified by the SD card specification part A2 section 2.2.15 these timeouts can be avoided. * This change has been used by beagleboard users as well as the Texas Instruments SDK without a negative impact. * There are multiple discussion threads about this but the most relevant ones are: * http://talk.maemo.org/showthread.php?p=1000707#post1000707 * http://www.mail-archive.com/linux-omap@vger.kernel.org/msg42213.html * Original proposal for this fix was done by Sukumar Ghoral of Texas Instruments * Tested using a Texas Instruments AM335x EVM Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sdhci-dove: Fix compile error by including module.hAlf Høgemark2012-04-051-0/+1
| | | | | | | | | | | | | | | | | | This patch fixes a compile error in drivers/mmc/host/sdhci-dove.c by including the linux/module.h file. Signed-off-by: Alf Høgemark <alf@i100.no> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes.Al Cooper2012-04-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver should not try to switch to 1.8V when the SD 3.0 host controller does not have any UHS capabilities bits set (SDR50, DDR50 or SDR104). See page 72 of "SD Specifications Part A2 SD Host Controller Simplified Specification Version 3.00" under "1.8V Signaling Enable". Instead of setting SDR12 and SDR25 in the host capabilities data structure for all V3.0 host controllers, only set them if SDR104, SDR50 or DDR50 is set in the host capabilities register. This will prevent the switch to 1.8V later. Signed-off-by: Al Cooper <acooper@gmail.com> Acked-by: Arindam Nath <arindam.nath@amd.com> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | Revert "mmc: sdhci-pci: Add MSI support"Chris Ball2012-04-051-6/+0
| | | | | | | | | | | | | | | | | | This reverts commit e6039832bed9a9b967796d7021f17f25b625b616. There are reports of MSI breaking SDHCI on multiple chipsets (JMicron and O2Micro, at least), so this should be reverted until we come up with a whitelist or something. Signed-off-by: Chris Ball <cjb@laptop.org>
* | Revert "mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllers"Chris Ball2012-04-051-3/+1
| | | | | | | | | | | | | | This reverts commit c16e981b2fd9455af670a69a84f4c8cf07e12658, because it's no longer useful once MSI support is reverted. Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: core: fix power class selectionSubhash Jadavani2012-04-051-13/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmc_select_powerclass() function returns error if eMMC VDD level supported by host is between 2.7v to 3.2v. According to eMMC specification, valid voltage for high voltage cards is 2.7v to 3.6v. This patch ensures that 2.7v to 3.6v VDD range is treated as valid range. Also, failure to set the power class shouldn't be treated as fatal error because even if setting the power class fails, card can still work in default power class. If mmc_select_powerclass() returns error, just print the warning message and go ahead with rest of the card initialization. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: omap_hsmmc: fix module re-insertionBalaji T K2012-04-051-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | OMAP4 and OMAP3 HSMMC IP registers differ by 0x100 offset. Adding the offset to platform_device resource structure increments the start address for every insmod operation. MMC command fails on re-insertion as module due to incorrect register base. Fix this by updating the ioremap base address only. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: omap_hsmmc: convert to module_platform_driverFelipe Balbi2012-04-051-15/+1
| | | | | | | | | | | | | | | | This will delete some boilerplate code, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: omap_hsmmc: make it behave well as a moduleFelipe Balbi2012-04-051-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | If we put probe() on __init section, that will never work for multiple module insertions/removals. In order to make it work properly, move probe to __devinit section and use platform_driver_register() instead of platform_driver_probe(). Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: omap_hsmmc: trivial cleanupsFelipe Balbi2012-04-051-77/+70
| | | | | | | | | | | | | | | | | | | | | | A bunch of non-functional cleanups to the omap_hsmmc driver. It basically decreases indentation level, drop unneded dereferences and drop unneded accesses to the platform_device structure. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: omap_hsmmc: context save after enabling runtime pmBalaji T K2012-04-051-2/+2
| | | | | | | | | | | | | | | | | | | | Call context save api after enabling runtime pm to make sure that register access in context save api happens with clk enabled. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: omap_hsmmc: use runtime put sync in probe error patchBalaji T K2012-04-051-2/+1
| | | | | | | | | | | | | | | | | | | | | | pm_runtime_put_sync instead of autosuspend pm runtime API because iounmap(host->base) follows immediately. Reported-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sdio: Use empty system suspend/resume callbacks at the bus levelRafael J. Wysocki2012-04-051-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Neil Brown reports that commit 35cd133c PM: Run the driver callback directly if the subsystem one is not there breaks suspend for his libertas wifi, because SDIO has a protocol where the suspend method can return -ENOSYS and this means "There is no point in suspending, just turn me off". Moreover, the suspend methods provided by SDIO drivers are not supposed to be called by the PM core or bus-level suspend routines (which aren't presend for SDIO). Instead, when the SDIO core gets to suspend the device's ancestor, it calls the device driver's suspend function, catches the ENOSYS, and turns the device off. The commit above breaks the SDIO core's assumption that the device drivers' callbacks won't be executed if it doesn't provide any bus-level callbacks. If fact, however, this assumption has never been really satisfied, because device class or device type suspend might very well use the driver's callback even without that commit. The simplest way to address this problem is to make the SDIO core tell the PM core to ignore driver callbacks, for example by providing no-operation suspend/resume callbacks at the bus level for it, which is implemented by this change. Reported-and-tested-by: Neil Brown <neilb@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> [stable: please apply to 3.3-stable only] Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: bus: print bus speed mode of UHS-I cardSubhash Jadavani2012-04-051-2/+15
| | | | | | | | | | | | | | | | | | | | When UHS-I card is detected also print the bus speed mode in which UHS-I card will be running. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllersManuel Lauss2012-04-051-1/+3
| | | | | | | | | | | | | | | | MSI on my O2Micro OZ600 SD card reader is broken. This patch adds a quirk to disable MSI on these controllers. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sh_mmcif: Simplify calculation of mmc->f_minSimon Horman2012-04-051-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to tune mmc->f_min to a value near 400kHz as the MMC core begins testing frequencies at 400kHz regardless of the value of mmc->f_min. As suggested by Guennadi Liakhovetski. Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Cao Minh Hiep <hiepcm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sh_mmcif: mmc->f_max should be half of the bus clockSimon Horman2012-04-051-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | mmc->f_max should be half of the bus clock. And now that mmc->f_max is not equal to the bus clock the latter should be used directly to calculate mmc->f_min. Cc: Magnus Damm <magnus.damm@gmail.com> Tested-by: Cao Minh Hiep <hiepcm@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sh_mmcif: double clock speedSimon Horman2012-04-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct an off-by one error when calculating the clock divisor in cases where the host clock is a power of two of the target clock. Previously the divisor was one greater than the correct value in these cases leading to the clock being set at half the desired speed. Thanks to Guennadi Liakhovetski for working with me on the logic for this change. Tested-by: Cao Minh Hiep <hiepcm@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: block: Remove use of mmc_blk_set_blksizeUlf Hansson2012-04-051-26/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | According to the specifications for SD and (e)MMC default blocksize (named BLOCKLEN in Spec.) must always be 512 bytes. Since we hardcoded to always use 512 bytes, we do not explicitly have to set it. Future improvements should potentially make it possible to use a greater blocksize than 512 bytes, but until then let's skip this. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Subhash Jadavani <subhashj@codeauora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: atmel-mci: add support for odd clock dividersLudovic Desroches2012-04-052-19/+30
| | | | | | | | | | | | | | | | | | | | Add an odd clock divider capability available from v5xx. It also involves changing the clock divider calculation, and changing the switch-case statement to use top-down fallthrough. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: atmel-mci: r/w proof capability only available since v2xxLudovic Desroches2012-04-051-0/+2
| | | | | | | | | | | | Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: atmel-mci: correct data timeout computationLudovic Desroches2012-04-051-1/+8
| | | | | | | | | | | | | | | | | | | | | | The HSMCI operates at a rate of up to Master Clock divided by two. Moreover previous calculation can cause overflows and so wrong timeouts. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sdhci-s3c: Enable runtime power managementMark Brown2012-04-051-0/+28
| | | | | | | | | | | | | | | | | | | | Since most of the work is already done by the core we just need to add runtime suspend methods and tell the PM core that runtime PM is enabled for this device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sdhci-s3c: Use CONFIG_PM_SLEEP to ifdef system suspendMark Brown2012-04-051-4/+7
| | | | | | | | | | | | | | | | | | This matches current best practice as one can have runtime PM enabled without system sleep and CONFIG_PM is defined for both. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sdhci-s3c: use devm_ functionsJulia Lawall2012-04-051-24/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. By using devm_ioremap, it also removes a potential memory leak, because there was no call to iounmap in the probe function. The call to platform_get_resource was moved just to make it closer to the place where its result it used. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sdhci-s3c: Keep a copy of platform data and use itThomas Abraham2012-04-051-2/+9
| | | | | | | | | | | | | | | | | | | | The platform data is copied into driver's private data and the copy is used for all access to the platform data. This simpifies the addition of device tree support for the sdhci-s3c driver. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sdhci-s3c: derive transfer width host cap from max_width in platdataThomas Abraham2012-04-051-0/+8
| | | | | | | | | | | | | | | | | | max_width member in platform data can be used to derive the mmc bus transfer width that can be supported by the controller. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | mmc: sdhci-s3c: Remove usage of clk_type member in platform dataThomas Abraham2012-04-051-4/+70
|/ | | | | | | | | | | | | | | | | | SDHCI controllers on Exynos4 do not include the sdclk divider as per the sdhci controller specification. This case can be represented using the sdhci quirk SDHCI_QUIRK_NONSTANDARD_CLOCK instead of using an additional enum type definition 'clk_types'. Hence, usage of clk_type member in platform data is removed and the sdhci quirk is used. In addition to that, since this qurik is SoC specific, driver data is introduced to represent controllers on SoC's that require this quirk. Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* Merge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6Linus Torvalds2012-03-301-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD changes from David Woodhouse: - Artem's cleanup of the MTD API continues apace. - Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst others. - More work on DiskOnChip G3, new driver for DiskOnChip G4. - Clean up debug/warning printks in JFFS2 to use pr_<level>. Fix up various trivial conflicts, largely due to changes in calling conventions for things like dmaengine_prep_slave_sg() (new inline wrapper to hide new parameter, clashing with rewrite of previously last parameter that used to be an 'append' flag, and is now a bitmap of 'unsigned long flags'). (Also some header file fallout - like so many merges this merge window - and silly conflicts with sparse fixes) * tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits) mtd: docg3 add protection against concurrency mtd: docg3 refactor cascade floors structure mtd: docg3 increase write/erase timeout mtd: docg3 fix inbound calculations mtd: nand: gpmi: fix function annotations mtd: phram: fix section mismatch for phram_setup mtd: unify initialization of erase_info->fail_addr mtd: support ONFI multi lun NAND mtd: sm_ftl: fix typo in major number. mtd: add device-tree support to spear_smi mtd: spear_smi: Remove default partition information from driver mtd: Add device-tree support to fsmc_nand mtd: fix section mismatch for doc_probe_device mtd: nand/fsmc: Remove sparse warnings and errors mtd: nand/fsmc: Add DMA support mtd: nand/fsmc: Access the NAND device word by word whenever possible mtd: nand/fsmc: Use dev_err to report error scenario mtd: nand/fsmc: Use devm routines mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform mtd: fsmc_nand: add pm callbacks to support hibernation ...
| * mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()Huang Shijie2012-03-271-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [1] Background : The GPMI does ECC read page operation with a DMA chain consist of three DMA Command Structures. The middle one of the chain is used to enable the BCH, and read out the NAND page. The WAIT4END(wait for command end) is a comunication signal between the GPMI and MXS-DMA. [2] The current DMA code sets the WAIT4END bit at the last one, such as: +-----+ +-----+ +-----+ | cmd | ------------> | cmd | ------------------> | cmd | +-----+ +-----+ +-----+ ^ | | set WAIT4END here This chain works fine in the mx23/mx28. [3] But in the new GPMI version (used in MX50/MX60), the WAIT4END bit should be set not only at the last DMA Command Structure, but also at the middle one, such as: +-----+ +-----+ +-----+ | cmd | ------------> | cmd | ------------------> | cmd | +-----+ +-----+ +-----+ ^ ^ | | | | set WAIT4END here too set WAIT4END here If we do not set WAIT4END, the BCH maybe stalls in "ECC reading page" state. In the next ECC write page operation, a DMA-timeout occurs. This has been catched in the MX6Q board. [4] In order to fix the bug, rewrite the last parameter of mxs_dma_prep_slave_sg(), and use the dma_ctrl_flags: --------------------------------------------------------- DMA_PREP_INTERRUPT : append a new DMA Command Structrue. DMA_CTRL_ACK : set the WAIT4END bit for this DMA Command Structure. --------------------------------------------------------- [5] changes to the relative drivers: <1> For mxs-mmc driver, just use the new flags, do not change any logic. <2> For gpmi-nand driver, and use the new flags to set the DMA chain, especially for ecc read page. Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mxs-dma : move the mxs dma.h to a more common placeHuang Shijie2012-03-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the header to a more common place. The mxs dma engine is not only used in mx23/mx28, but also used in mx50/mx6q. It will also be used in the future chips. Rename it to mxs-dma.h, and create a new folder include/linux/fsl/ to store the Freescale's header files. change mxs-dma driver, mxs-mmc driver, gpmi-nand driver, mxs-saif driver to the new header file. Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2012-03-296-14/+26
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...
| * | dmaengine/dma_slave: introduce inline wrappersAlexandre Bounine2012-03-216-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
| * | dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changesViresh Kumar2012-02-221-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | There are few existing user drivers of dw_dmac. They will break as soon as we remove unused fields from struct dw_dma_slave. This patch focuses to fix these user drivers to use dma_slave_config() routine. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
| * | dmaengine: Pass dma_slave_config .device_fc = NULL for all existing usersViresh Kumar2012-02-222-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | .device_fc is added in struct dma_slave_config recently. All user drivers, which want DMA to be the flow controller must pass this field as false. As earlier driver don't look to use this feature, mark it false for now. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
| * | mmc: mxcmmc: add missing dma_async_issue_pendingSascha Hauer2012-01-301-0/+1
| | | | | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
* | | Merge tag 'mmc-merge-for-3.4-rc1' of ↵Linus Torvalds2012-03-2826-645/+1058
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: Core: * Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices that support Data Tag will provide increased throughput for metadata. * Faster detection of card removal on I/O errors. Drivers: * dw_mmc now supports eMMC Power Off Notify, has PCI support, and implements pre_req and post_req for asynchronous requests. * omap_hsmmc now supports device tree. * esdhc now has power management support. * sdhci-tegra now supports Tegra30 devices. * sdhci-spear now supports hibernation. * tmio_mmc now supports using a GPIO for card detection. * Intel PCH now supports 8-bit bus transfers. * tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits) mmc: sh_mmcif: simplify bitmask macros mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug mmc: sh_mobile_sdhi: add a callback for board specific init code mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function mmc: sh_mobile_sdhi: do not manage PM clocks manually mmc: tmio_mmc: remove unused sdio_irq_enabled flag mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper mmc: tmio: calculate the native hotplug condition only once mmc: simplify mmc_cd_gpio_request() by removing two parameters mmc: sdhci-pci: allow 8-bit bus width for Intel PCH mmc: sdhci: check interrupt flags in ISR again mmc: sdhci-pci: Add MSI support mmc: core: warn when card doesn't support HPI mmc: davinci: Poll status for small size transfers mmc: davinci: Eliminate spurious interrupts mmc: omap_hsmmc: Avoid a regulator voltage change with dt mmc: omap_hsmmc: Convert hsmmc driver to use device tree mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO ...
OpenPOWER on IntegriCloud