summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci-pci.c
Commit message (Collapse)AuthorAgeFilesLines
* mmc: sdhci-pci: set the clear transfer mode register quirk for O2MicroAdam Lee2015-08-271-0/+1
| | | | | | | | | | | This patch fixes MMC not working issue on O2Micro/BayHub Host, which requires transfer mode register to be cleared when sending no DMA command. Signed-off-by: Peter Guo <peter.guo@bayhubtech.com> Signed-off-by: Adam Lee <adam.lee@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: Change AMD SDHCI quirk application scopeVincent Wan2015-06-161-1/+24
| | | | | | | | | Change this quirk to apply to AMD Carrizo platform. Signed-off-by: Wan ZongShun <Vincent.Wan@amd.com> Tested-by: Nath, Arindam <Arindam.Nath@amd.com> Tested-by: Ramesh, Ramya <Ramya.Ramesh@amd.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: Enable HS400 for some Intel host controllersAdrian Hunter2015-06-011-0/+1
| | | | | | | | Enable detection of HS400 support via capability bit-63 for some Intel host controllers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: Add support for drive strength selection for SPTAdrian Hunter2015-06-011-0/+83
| | | | | | | | Implement the select_drive_strength callback to provide drive strength selection for Intel SPT. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: fix 64 BIT DMA quirks for rtsxMicky Ching2015-04-081-0/+1
| | | | | | | | rts5250 chip failed handle 64 bit ADMA for address below 4G. Add 64 BIT quirks to disable this feature. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: Remove redundant runtime PM idle callbackUlf Hansson2015-01-191-6/+1
| | | | Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: Add support for Intel SPTAdrian Hunter2015-01-121-0/+25
| | | | | | | Add PCI IDs for SPT eMMC, SDIO and SD card. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds2014-12-101-11/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
| * MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki2014-12-051-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/mmc/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: sdhci-pci: Add two host capabilities for BYTAdrian Hunter2014-12-021-2/+8
| | | | | | | | | | | | | | | | | | BYT host controllers are capable of doing the bus width test and of waiting while busy, so add the capability flags. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: sdhci-pci: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC to BYTAdrian Hunter2014-12-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC actually causes standard-compliant behaviour by causing the flagging of the last DMA transfer descriptor as the end instead of there being an additional nop descriptor which is flagged as the end. Consequently, it is better to have the quirk. Add it for BYT. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: sdhci-pci: enable sdhci doesn't support hs200 quirk for AMD sdhciVincent Wan2014-11-261-1/+3
| | | | | | | | | | | | | | | | | | AMD SD controller supports the SDR104 mode, but caps2 can not be promoted to support hs200 for eMMC. Signed-off-by: Vincent Wan <vincent.wan@amd.com> Signed-off-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: sdhci-pci: enable the clear transfer mode register quirk for AMD sdhciVincent Wan2014-11-261-1/+26
| | | | | | | | | | | | | | | | | | This patch is to enable the quirk for AMD sdhci requiring transfer mode register need to be cleared for commands without data Signed-off-by: Vincent Wan <vincent.wan@amd.com> Signed-off-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: sdhci-pci: Add 64-bit DMA supportAdrian Hunter2014-11-101-2/+12
|/ | | | | | | Set a 64-bit DMA mask when using 64-bit DMA. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequencyAdrian Hunter2014-10-031-0/+2
| | | | | | | | | Braswell eMMC host controller specifies an incorrect timeout clock frequncy in the capabilities registers. The correct value is 1 MHz. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: Add Bay Trail and Braswell SD card detectAdrian Hunter2014-10-031-1/+19
| | | | | | | | | | | | | Add support for card detect for Bay Trail and Braswell SD Card host controllers in PCI mode. This uses the gpio descriptor API which can find gpio descriptors, for example, on an ACPI comapnion device. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllersAdrian Hunter2014-10-031-2/+4
| | | | | | | Add quirk SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: disable preset register for Baytrail and MerrifieldGao, Yunpeng2014-09-091-3/+6
| | | | | | | | | | Due to HW issue, SDHCI host controller on Intel Baytrail/Merrifield platforms can not use preset register. So, disable preset registers for them by quirks. Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com> Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: enable runtime pm for Intel Merrifield platformGao, Yunpeng2014-09-091-0/+1
| | | | | | | Enable runtime pm support on Intel Merrifield platform. Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add PCI IDs for Intel BraswellAlan Cox2014-09-091-0/+23
| | | | | | | | | The hardware is the same as used in Baytrail. Add these new PCI IDs to the driver's list of supported IDs. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: Use SET_RUNTIME_PM_OPS macro to set runtime pm callbacksPeter Griffin2014-09-091-9/+2
| | | | | | | | This allows us to get rid of the #else condition, as the macro compiles away to nothing if not enabled. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: remove PCI PM functions in suspend/resume callbackChuanxiao.Dong2014-07-261-17/+6
| | | | | | | | | | | | | | | | It is not required (in fact it even is not recommended) that a PCI driver's suspend() callback save the standard configuration registers of the device, prepare it for waking up the system, or put it into a low-power state. All of these operations can very well be taken care of by the PCI subsystem, without the driver's participation. Thus remove these PCI functions. For the device which has wake up capability, use device_init_wakeup to init the wake up capability so that PCI core will help to enable the wakeup for it. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC ControllerMaurice Petallo2014-07-101-1/+1
| | | | | | | | | This is to enable DDR50 bus speed mode with 1.8V signaling capability for BayTrail ACPI and PCI mode eMMC Controller. Signed-off-by: Maurice Petallo <mauricex.r.petallo@intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Preset value not supported in Baytrail eMMCMaurice Petallo2014-07-101-0/+1
| | | | | | | | | "SDHCI_QUIRK2_PRESET_VALUE_BROKEN" quirk is added to prohibit preset value enabling for Baytrail eMMC controller. Signed-off-by: Maurice Petallo <mauricex.r.petallo@intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-pci: SDIO host controller support for Intel Quark X1000Derek Browne2014-07-091-0/+12
| | | | | | | | This patch is to enable SDIO host controller for Intel Quark X1000. Signed-off-by: Derek Browne <Derek.Browne@intel.com> Signed-off-by: Alvin (Weike) Chen <alvin.chen@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: convert sdhci_set_uhs_signaling() into a library functionRussell King2014-05-221-0/+1
| | | | | | | | | | | | Add sdhci_set_uhs_signaling() and always call the set_uhs_signaling method. This avoids quirks being added into sdhci_set_uhs_signaling(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> [Ulf Hansson] Resolved conflict Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
* mmc: sdhci: convert sdhci_set_clock() into a library functionRussell King2014-05-221-0/+1
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
* mmc: sdhci: convert reset into a library functionRussell King2014-05-221-0/+1
| | | | | | | | | | | | | Rather than having platform_reset_enter/platform_reset_exit methods, turn the core of the reset handling into a library function which platforms can call at the appropriate moment in their (new) reset method. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
* mmc: sdhci: convert generic bus width setup to library functionRussell King2014-05-221-4/+2
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
* mmc: sdhci: add support for realtek rts5250Micky Ching2014-02-221-0/+20
| | | | | | | | Add support for realtek rts5250 pci card reader. The card reader has some problems with DDR50 mode, so add a new quirks2 for broken ddr50. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
* mmc: sdhci-pci: Fix possibility of chip->fixes being nullAdrian Hunter2014-01-231-1/+2
| | | | | | | | It is possible for chip->fixes to be null. Check before dereferencing it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable <stable@vger.kernel.org> # 3.11+ Signed-off-by: Chris Ball <chris@printf.net>
* mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspendAdrian Hunter2014-01-201-0/+10
| | | | | | | | | | | | | | | | | | | | | A host controller for a SD card may need a GPIO for card detect in order to wake up from runtime suspend when a card is inserted. If that GPIO is not configured, then the host controller will not wake up. Fix that for the affected devices by not enabling runtime PM unless the GPIO is successfully set up. This affects BYT sd card host controller which had runtime PM enabled from v3.11. For completeness, the MFD sd card host controller is flagged also. The original patch before rebasing (see link below) was tested on v3.11.10 and v3.12.4 although the patch applied with some offsets and fuzz. The original patch is here: http://marc.info/?l=linux-mmc&m=138676702327057 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable <stable@vger.kernel.org> # 3.11+ Signed-off-by: Chris Ball <chris@printf.net>
* mmc: sdhci-pci: add broken HS200 quirk for Intel MerrifieldDavid Cohen2014-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to unknown hw issue so far, Merrifield is unable to enable HS200 support. This patch adds quirk to avoid SDHCI to initialize with error below: [ 53.850132] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.12.0-rc6-00037-g3d7c8d9-dirty #36 [ 53.850150] Hardware name: Intel Corporation Merrifield/SALT BAY, BIOS 397 2013.09.12:11.51.40 [ 53.850167] 00000000 00000000 ee409e48 c18816d2 00000000 ee409e78 c123e254 c1acc9b0 [ 53.850227] 00000000 00000000 c1b14148 000003de c16c03bf c16c03bf ee75b480 ed97c54c [ 53.850282] ee75b480 ee409e88 c123e292 00000009 00000000 ee409ef8 c16c03bf c1207fac [ 53.850339] Call Trace: [ 53.850376] [<c18816d2>] dump_stack+0x4b/0x79 [ 53.850408] [<c123e254>] warn_slowpath_common+0x84/0xa0 [ 53.850436] [<c16c03bf>] ? sdhci_send_command+0xb4f/0xc50 [ 53.850462] [<c16c03bf>] ? sdhci_send_command+0xb4f/0xc50 [ 53.850490] [<c123e292>] warn_slowpath_null+0x22/0x30 [ 53.850516] [<c16c03bf>] sdhci_send_command+0xb4f/0xc50 [ 53.850545] [<c1207fac>] ? native_sched_clock+0x2c/0xb0 [ 53.850575] [<c14c1f93>] ? delay_tsc+0x73/0xb0 [ 53.850601] [<c14c1ebe>] ? __const_udelay+0x1e/0x20 [ 53.850626] [<c16bdeb3>] ? sdhci_reset+0x93/0x190 [ 53.850654] [<c16c05b0>] sdhci_finish_data+0xf0/0x2e0 [ 53.850683] [<c16c130f>] sdhci_irq+0x31f/0x930 [ 53.850713] [<c12cb080>] ? __buffer_unlock_commit+0x10/0x20 [ 53.850740] [<c12cbcd7>] ? trace_buffer_unlock_commit+0x37/0x50 [ 53.850773] [<c1288f3c>] handle_irq_event_percpu+0x5c/0x220 [ 53.850800] [<c128bc96>] ? handle_fasteoi_irq+0x16/0xd0 [ 53.850827] [<c128913a>] handle_irq_event+0x3a/0x60 [ 53.850852] [<c128bc80>] ? unmask_irq+0x30/0x30 [ 53.850878] [<c128bcce>] handle_fasteoi_irq+0x4e/0xd0 [ 53.850895] <IRQ> [<c1890b52>] ? do_IRQ+0x42/0xb0 [ 53.850943] [<c1890a31>] ? common_interrupt+0x31/0x38 [ 53.850973] [<c12b00d8>] ? cgroup_mkdir+0x4e8/0x580 [ 53.851001] [<c1208d32>] ? default_idle+0x22/0xf0 [ 53.851029] [<c1209576>] ? arch_cpu_idle+0x26/0x30 [ 53.851054] [<c1288505>] ? cpu_startup_entry+0x65/0x240 [ 53.851082] [<c18793d5>] ? rest_init+0xb5/0xc0 [ 53.851108] [<c1879320>] ? __read_lock_failed+0x18/0x18 [ 53.851138] [<c1bf6a15>] ? start_kernel+0x31b/0x321 [ 53.851164] [<c1bf652f>] ? repair_env_string+0x51/0x51 [ 53.851190] [<c1bf6363>] ? i386_start_kernel+0x139/0x13c [ 53.851209] ---[ end trace 92777f5fe48d33f2 ]--- [ 53.853449] mmcblk0: error -84 transferring data, sector 11142162, nr 304, cmd response 0x0, card status 0x0 [ 53.853476] mmcblk0: retrying using single block read [ 55.937863] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock [ 56.207951] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock [ 66.228785] mmc0: Timeout waiting for hardware interrupt. [ 66.230855] ------------[ cut here ]------------ Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Reviewed-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Acked-by: Dong Aisheng <b29396@freescale.com> Cc: stable <stable@vger.kernel.org> # [3.13] Signed-off-by: Chris Ball <chris@printf.net>
* mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hostsAdam Lee2014-01-131-60/+45
| | | | | | | | | | | | | Add O2Micro/BayHubTech SD Host DeviceId 8520 support. Add O2Micro/BayHubTech SD Host DeviceId 8420 & 8421 support. Add O2Micro/BayHubTech SD Host DeviceId 8620 & 8621 support. These card readers are used in laptops like Lenovo ThinkPad W540, Dell Latitude E5440, Dell Latitude E6540. Signed-off-by: Peter Guo <peter.guo@bayhubtech.com> Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: Chris Ball <chris@printf.net>
* mmc: sdhci-pci: break out definitions to header fileAdam Lee2014-01-131-73/+1
| | | | | | | | Break out definitions in sdhci-pci.c to sdhci-pci.h, for introducing module files like sdhci-pci-xxx.c Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: Chris Ball <chris@printf.net>
* mmc: sdhci-pci: Add SDIO/MMC device ID support for Intel ClovertrailEric Ernst2013-10-301-0/+46
| | | | | | | | | This patch adds intel_mid clovertrail SDIO and eMMC device IDs to the sdhci-pci driver. Signed-off-by: Eric Ernst <eric.ernst@linux.intel.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-pci: add Intel Merrifield supportDavid Cohen2013-10-211-0/+30
| | | | | | | | Implement initial SDHCI Intel Merrifield support. This patch is based on previous one from Yunpeng Gao <yunpeng.gao@intel.com>. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-pci: add another device idAdrian Hunter2013-07-051-0/+9
| | | | | | | Add another PCI device id for an eMMC host controller. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC.Adrian Hunter2013-07-051-2/+30
| | | | | | | Add support for eMMC hardware reset for BYT eMMC. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-pci: support runtime PM for BYT SD cardsAdrian Hunter2013-05-261-0/+2
| | | | | | | Add support for runtime PM for BYT SD cards. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-pci: add more device idsAdrian Hunter2013-05-261-0/+54
| | | | | | | Add three more PCI device ids. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: fix init controller performance regression, updated patchAdrian Hunter2013-04-151-0/+1
| | | | | | | | | Add MMC_CAP2_NO_PRESCAN_POWERUP to sdhci-pci.c also, use mmc_power_off() for MMC_CAP2_NO_PRESCAN_POWERUP. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> [cjb: previously applied v1 of this patch instead of v4] Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci: Constify sdhci_ops structs where possibleLars-Peter Clausen2013-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Basically all drivers can have sdhci_ops struct const, but almost none do. This patch constifies all sdhci_ops struct declarations where possible. The patch was auto-generated with the following coccinelle semantic patch: // <smpl> @r1@ identifier ops; identifier fld; @@ ops.fld = ...; @disable optional_qualifier@ identifier ops != r1.ops; @@ static +const struct sdhci_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdio: bind acpi with sdio function deviceAaron Lu2013-03-221-0/+1
| | | | | | | | | | | | | ACPI spec 5 defined the _ADR encoding for sdio bus as: High word - slot number (0 based) Low word - function number This patch adds support for binding sdio function device with acpi node, and if successful, involve acpi into its power management. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci: rename platform_8bit_width to platform_bus_widthSascha Hauer2013-02-241-2/+2
| | | | | | | | | | | | The 8bit in the function name is misleading. When set, it will be used to set the bus width, regardless of whether 8bit or another bus width is requested, so change the function name to platform_bus_width. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* Merge tag 'driver-core-3.8-rc1' of ↵Linus Torvalds2012-12-111-7/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
| * mmc: remove use of __devexitBill Pemberton2012-11-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: remove use of __devinitconstBill Pemberton2012-11-281-1/+1
| | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: remove use of __devinitBill Pemberton2012-11-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: remove use of __devexit_pBill Pemberton2012-11-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud