summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/core
Commit message (Collapse)AuthorAgeFilesLines
* mmc: core: Support the optional init_card() callback for MMC and SDDoug Anderson2015-01-192-1/+12
| | | | | | | | | | | | | | | | | | | | | In (3fcb027 ARM: MXC: mxcmmc: work around a bug in the SDHC busy line handling) the optional init_card() callback was added. According to the original change it was "for now only called from mmc_sdio_init_card()". This callback really ought to be called from the SD and MMC init functions as well. One current user of this callback (mxcmci_init_card) will not work as expected if you insert an SDIO card, then eject it and put a normal SD card in. Specifically the normal SD card will not get to run with 4-bit data. I'd like to use the init_card() callback to handle a similar quirk on dw_mmc when using SDIO Interrupts (the "low power" feature of the card needs to be disabled), so that will add a second user of the function. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: stop trying to switch width when only one bit is supportedAlexandre Belloni2014-12-291-1/+1
| | | | | | | | | | | mmc_select_bus_width() will try to switch to MMC_BUS_WIDTH_4 even if MMC_CAP_4_BIT_DATA and MMC_CAP_8_BIT_DATA are not set in host->caps. Return as soon as possible when those flags are not set Fixes: 577fb13199b1 (mmc: rework selection of bus speed mode) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds2014-12-101-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
| * MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki2014-12-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/mmc/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameterUlf Hansson2014-12-081-4/+3
| | | | | | | | | | | | | | | | | | | | | | To be able to use mmc_send_tuning() prior the struct mmc_card has been allocated, let's convert it to take the struct mmc_host* as parameter instead. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Dong Aisheng <b29396@freescale.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
* | mmc: core: add core-level function for sending tuning commandsMinda Chen2014-11-261-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the SD card spec, Add a manual tuning command function for SDR104/HS200. Sending command 19 or command 21 to read data and compare with the tunning block pattern. This patch will help to decrease some platform private codes in SDHCI platform_execute_tuning() callbacks. Signed-off-by: Minda Chen <Minda.Chen@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: hold SD Clock before CMD11 during SignalVincent Yang2014-11-261-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Voltage Switch Procedure This patch is to fix an issue found on mb86s7x platforms. [symptom] There are some UHS-1 SD memory cards sometimes cannot be detected correctly, e.g., Transcend 600x SDXC 64GB UHS-1 memory card. During Signal Voltage Switch Procedure, failure to switch is indicated by the card holding DAT[3:0] low. [analysis] According to SD Host Controller Simplified Specification Version 3.00 chapter 3.6.1, the Signal Voltage Switch Procedure should be: (1) Check S18A; (2) Issue CMD11; (3) Check CMD 11 response; (4) Stop providing SD clock; (5) Check DAT[3:0] should be 0000b; (6) Set 1.8V Signal Enable; (7) Wait 5ms; (8) Check 1.8V Signal Enable; (9) Provide SD Clock; (10) Wait 1ms; (11) Check DAT[3:0] should be 1111b; (12) error handling With CONFIG_MMC_CLKGATE=y, sometimes there is one more gating/un-gating SD clock between (2) and (3). In this case, some UHS-1 SD cards will hold DAT[3:0] 0000b at (11) and thus fails Signal Voltage Switch Procedure. [solution] By mmc_host_clk_hold() before CMD11, the additional gating/un-gating SD clock between (2) and (3) can be prevented and thus no failure at (11). It has been verified with many UHS-1 SD cards on mb86s7x platforms and works correctly. Signed-off-by: Vincent Yang <Vincent.Yang@tw.fujitsu.com> Reviewed-by: Johan Rudholm <jrudholm@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: reset sdio card properly on resume.NeilBrown2014-11-261-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | mmc_sdio_power_restore() calls mmc_send_if_cond(host, host->card->ocr); ret = mmc_send_io_op_cond(host, 0, NULL); between mmc_go_idle() and mmc_sdio_init_card(). mmc_sdio_resume() needs to as well, else my libertas sdio wifi device doesn't resume properly from suspend. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: use card->ocr when negotiating voltage setting in ↵NeilBrown2014-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmc_sdio_power_restore As we are restoring power to a known card, it makes sense to use the 'ocr' value known for the card rather than the generic one for the host interface. This matches the use of card->ocr passed to mmc_power_up in mmc_sdio_runtime_resume (just before mmc_sdio_power_restore is called), and the value passed to mmc_sdio_init_card() a little later in mmc_sdio_power_restore(). Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: consistent handling of initial valuesJohan Rudholm2014-11-262-25/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmc_do_hw_reset(), mmc_power_up() and mmc_power_off() all set similar initial values for bus_mode, bus_width, chip_select and timing. Let's make this handling simpler and more consistent by sticking them together in a common function. This will introduce small changes in behavior in the following places: mmc_power_off(): For SPI hosts, explicitly set bus_mode = MMC_BUSMODE_PUSHPULL and chip_select = MMC_CS_HIGH, before we left them as they were. For non-SPI hosts, set bus_mode = MMC_BUSMODE_PUSHPULL instead of MMC_BUSMODE_OPENDRAIN as before. These two changes should not be a problem since the device will be powered off anyway. mmc_do_hw_reset(): Always set bus_mode = MMC_BUSMODE_PUSHPULL, as required by SD/SDIO cards. MMC cards require MMC_BUSMODE_OPENDRAIN, but this is taken care of by mmc_init_card() and mmc_attach_mmc(). Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: use mmc_send_status to check hw_resetJohan Rudholm2014-11-101-8/+2
| | | | | | | | | | Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Convert to use kzalloc() for CXD register buffersUlf Hansson2014-11-101-3/+3
| | | | | | | | | | | | | | While allocating buffers for CXD data, let's use kzalloc() to make sure those are zeroed. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Don't handle buffers on stack while fetching CXD registersUlf Hansson2014-11-101-20/+1
| | | | | | | | | | | | | | | | | | Due to previous patches, all callers of mmc_send_cxd_data() now allocates their buffers from the heap. This enables us to simplify mmc_send_cxd_data() by removing the support of handling buffers, which are allocated from the stack. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Remove the redundant mmc_send_ext_csd() APIUlf Hansson2014-11-101-8/+2
| | | | | | | | | | | | | | | | Previous patches has replaced the calls to mmc_send_ext_csd() into mmc_get_ext_csd(), thus mmc_send_ext_csd() has become redundant. Let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Use mmc_get_ext_csd() instead of mmc_send_ext_csd()Ulf Hansson2014-11-102-22/+4
| | | | | | | | | | | | | | By using mmc_get_ext_csd() in favor of mmc_send_ext_csd, we decrease code duplication. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Export mmc_get_ext_csd()Ulf Hansson2014-11-102-31/+29
| | | | | | | | | | | | | | Callers of mmc_send_ext_csd() will be able to decrease code duplication by using mmc_get_ext_csd() instead. Let's make it available. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Don't panic when fetching EXT_CSDUlf Hansson2014-11-101-4/+2
| | | | | | | | | | | | Instead of doing BUG_ON(), return an error code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Let's callers of from mmc_get_ext_csd() do error handlingUlf Hansson2014-11-101-39/+31
| | | | | | | | | | | | | | | | | | | | The callers of mmc_get_ext_csd() need the flexibility to handle errors themselves, because they behave differently. Let's clean up mmc_get_ext_csd() with its friends and adopt the error handling as stated above. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Fetch and decode EXT_CSD from mmc_read_ext_csd()Ulf Hansson2014-11-101-13/+17
| | | | | | | | | | | | | | | | As a step in cleaning up code around reading/decoding EXT_CSD, convert the current mmc_read_ext_csd(), to handle both fetching the EXT_CSD and decoding its data. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Add helper function for EXT_CSD supportUlf Hansson2014-11-103-4/+10
| | | | | | | | | | | | | | | | The helper function mmc_can_ext_csd() will return a positive value if the card supports the EXT_CSD register. Start using it at relavant places in the mmc core. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Remove unnecessary 'out of memory' messageUlf Hansson2014-11-101-4/+1
| | | | | | | | | | | | Rely on the prints handled internally by kmalloc(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Remove redundant check of max_dtr while selecting timingsUlf Hansson2014-11-101-2/+1
| | | | | | | | | | | | | | | | If the MMC spec version is < CSD_SPEC_VER_4, there aren't support for the EXT_CSD register. Since max_dtr is fetched from there, it will default to zero, which thus isn't needed to verify. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Remove redundant check while selecting powerclassUlf Hansson2014-11-101-8/+0
| | | | | | | | | | | | | | The validation of the buswidth and the MMC spec version in __mmc_select_powerclass() is redundant, let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Remove duplicated definition of mmc_send_ext_csd()Ulf Hansson2014-11-101-1/+0
| | | | | | | | | | | | | | | | mmc_send_ext_csd() is an exported function used by both the mmc core and the mmc block layer. Let's remove the local duplicated definition in the mmc core. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Remove mmc_free_ext_csd()Ulf Hansson2014-11-101-9/+3
| | | | | | | | | | | | Let callers of mmc_free_ext_csd() do kfree() directly instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: silence a shift wrapping warningDan Carpenter2014-11-101-1/+1
| | | | | | | | | | | | | | | | Presumably ->slotno is normally fairly small and the shift doesn't wrap but static checkers will complain about it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Report firmware version for eMMC 5.0 devices.Gwendal Grignou2014-11-101-1/+26
| | | | | | | | | | | | | | | | | | | | For eMMC 5.0 compliant device, firmware version is stored in ext_csd. Report firmware as a 64bit hexa decimal. Vendor can use hexa or ascii string to report firmware version. Also add FFU related EXT_CSD register and note if the device is FFU capable. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Convert mmc_driver to device_driverUlf Hansson2014-11-101-33/+8
| | | | | | | | | | | | | | | | | | | | | | The struct mmc_driver adds an extra layer on top of the struct device_driver. That would be fine, if there were a good reason, but that's not the case. Let's simplify code by converting to the common struct device_driver instead and thus also removing superfluous overhead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Convert the mmc_driver to use the modern PM opsUlf Hansson2014-11-101-10/+4
| | | | | | | | | | | | | | Instead of having specific mmc system PM callbacks for the mmc driver, let's convert to use the common ones. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Don't export the to_sdio_driver macroUlf Hansson2014-11-101-0/+2
| | | | | | | | | | | | The macro is only used by the mmc core, so let's move it in there. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Remove superfluous ifdefs for SDIO bus' PM callbacksUlf Hansson2014-11-101-11/+1
| | | | | | | | Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: fix prepared requests while doing bkopsSrinivas Kandagatla2014-11-101-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While starting the bkops the previously prepared request should be canceled and restarted after the bkops. As the prepared resource might already setup the dma channels and ready to be started. Now with the arrival of bkops request this prepared request can be serviced ONLY after the bkops. So holding on to the prepared request in the host driver is confusing at this point in time, so it makes sense to cleanup such dangling requests and reissue this request once bkops is done. Canceling the prepared request would give opportunity to the host drivers to perform cleanup on the prepared request. Without this patch host drivers like mmci gets confused when a blocking request like send_ext_csd(CMD8) is issued while there is already a prepared request. With the help of this patch, the driver can better manage such blocking requests and cleanup the prepared requests which are not started yet. Without this patch I hit below crash on Qualcomm APQ8064 based IFC6410 board with mmci host driver. mmci-pl18x 12400000.sdcc: error during DMA transfer! Unable to handle kernel paging request at virtual address 40000000 pgd = c0204000 [40000000] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM Modules linked in: ipv6 ath6kl_sdio ath6kl_core CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-rc7-linaro-multi-v7 #1 task: c0c9d7e0 ti: c0c92000 task.ti: c0c92000 PC is at v7_dma_inv_range+0x34/0x4c LR is at __dma_page_dev_to_cpu+0x80/0x100 pc : [<c021efc0>] lr : [<c021af18>] psr: 400f0193 sp : c0c93e20 ip : c0c9a478 fp : c08ea538 r10: c0c9f548 r9 : 00000002 r8 : e97d9000 r7 : 00000200 r6 : c0c9d504 r5 : c0db0880 r4 : 00000000 r3 : 0000003f r2 : 00000040 r1 : 40000200 r0 : 40000000 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5787d Table: a9ef406a DAC: 00000015 Process swapper/0 (pid: 0, stack limit = 0xc0c92250) Stack: (0xc0c93e20 to 0xc0c94000) 3e20: c021f058 e9a17178 e9a171bc e99dfd6c 00000001 00000001 e995de10 00000002 3e40: 00000000 c021b574 00000000 c04bc4a4 00000000 e9b49ac0 c0ce6e6c e99dfda4 3e60: 00000088 e9810780 c0d8291c c072ea58 00000000 c072d3fc 00000000 c072f534 3e80: 00000000 e9b49ac0 00000100 c0c9a444 00000088 c072f6b4 c072f5d4 e9d40080 3ea0: e98107dc 00000000 00000000 c0280a60 00000000 7d55bf61 e9810780 e98107dc 3ec0: 00000000 f0002000 c0d460e8 c0d460e8 c0c92000 c0280b60 e9810780 c0ce7190 3ee0: 00000000 c028369c c02835f4 00000088 00000088 c0280278 c0c8ec70 c020f080 3f00: f000200c c0c9a958 c0c93f28 c02088e4 c04bd630 c04bd5bc 200f0013 ffffffff 3f20: c0c93f5c c0212800 00000001 a987c000 c0c93f3c c04bd574 00000000 0000015b 3f40: ea7a0e40 00000000 c0d460e8 c0d460e8 c0c92000 c08ea538 29b12000 c0c93f70 3f60: c04bd630 c04bd5bc 200f0013 ffffffff c04bd574 c071bd24 7d50c9b4 c0719a44 3f80: 7d50c9b4 0000015b c0c9a498 c0c92028 c0c9a498 c0c9a4fc ea7a0e40 c0c8ee38 3fa0: c0d460e8 c0276198 00000000 c0d8291a 00000000 c0c9a400 00000000 c0be0bc4 3fc0: ffffffff ffffffff c0be05f8 00000000 00000000 c0c533d8 c0d82ed4 c0c9a47c 3fe0: c0c533d4 c0c9e870 8020406a 511f06f0 00000000 80208074 00000000 00000000 [<c021efc0>] (v7_dma_inv_range) from [<c021af18>] (__dma_page_dev_to_cpu+0x80/0x100) [<c021af18>] (__dma_page_dev_to_cpu) from [<c021b574>] (arm_dma_unmap_sg+0x5c/0x84) [<c021b574>] (arm_dma_unmap_sg) from [<c072ea58>] (mmci_dma_unmap.isra.16+0x60/0x74) [<c072ea58>] (mmci_dma_unmap.isra.16) from [<c072f534>] (mmci_data_irq+0x1fc/0x29c) [<c072f534>] (mmci_data_irq) from [<c072f6b4>] (mmci_irq+0xe0/0x114) [<c072f6b4>] (mmci_irq) from [<c0280a60>] (handle_irq_event_percpu+0x78/0x134) [<c0280a60>] (handle_irq_event_percpu) from [<c0280b60>] (handle_irq_event+0x44/0x64) [<c0280b60>] (handle_irq_event) from [<c028369c>] (handle_fasteoi_irq+0xa8/0x1a8) [<c028369c>] (handle_fasteoi_irq) from [<c0280278>] (generic_handle_irq+0x2c/0x3c) [<c0280278>] (generic_handle_irq) from [<c020f080>] (handle_IRQ+0x40/0x90) [<c020f080>] (handle_IRQ) from [<c02088e4>] (gic_handle_irq+0x38/0x68) [<c02088e4>] (gic_handle_irq) from [<c0212800>] (__irq_svc+0x40/0x54) Exception stack(0xc0c93f28 to 0xc0c93f70) 3f20: 00000001 a987c000 c0c93f3c c04bd574 00000000 0000015b 3f40: ea7a0e40 00000000 c0d460e8 c0d460e8 c0c92000 c08ea538 29b12000 c0c93f70 3f60: c04bd630 c04bd5bc 200f0013 ffffffff [<c0212800>] (__irq_svc) from [<c04bd5bc>] (msm_cpu_pm_enter_sleep+0x48/0x4c) [<c04bd5bc>] (msm_cpu_pm_enter_sleep) from [<c071bd24>] (qcom_lpm_enter_spc+0x20/0x2c) [<c071bd24>] (qcom_lpm_enter_spc) from [<c0719a44>] (cpuidle_enter_state+0x44/0xf0) [<c0719a44>] (cpuidle_enter_state) from [<c0276198>] (cpu_startup_entry+0x1f4/0x238) [<c0276198>] (cpu_startup_entry) from [<c0be0bc4>] (start_kernel+0x384/0x390) Code: 1e070f3e e1110003 e1c11003 1e071f3e (ee070f36) ---[ end trace cf6cb3f6432c9834 ]--- Kernel panic - not syncing: Fatal exception in interrupt Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Fix error paths and messages in mmc_init_cardAndrew Gabbasov2014-11-101-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | In mmc_init_card function some of the branches in error handling paths go to "err" label, which skips removing of newly allocated card structure, that will actually not be used. Fix that by using proper "free_card" label. Also, some messages in these branches are reported as warnings, although the operation processing is not continued. Change these messages to error level. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Add debug message for SET_BLOCK_COUNT resultAndrew Gabbasov2014-11-101-0/+8
| | | | | | | | | | | | | | | | | | The debug messages with commands execution results, that are printed after processing the request, do not include results of sbc (set block count) part of request. Add the debug message for that part too. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Initialize SET_BLOCK_COUNT request fieldsAndrew Gabbasov2014-11-101-0/+4
|/ | | | | | | | | | Some request fields are initialized just before request processing for sanity purposes. This is done for command, data, and stop parts of the request, but not for sbc (set block count) part. Add such initialization for that part too. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: fix card detection regressionKristina Martsenko2014-11-051-13/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 89168b489915 ("mmc: core: restore detect line inversion semantics"), the SD card on i.MX28 (and possibly other) devices isn't detected and booting stops at: [ 4.120617] Waiting for root device /dev/mmcblk0p3... This is caused by the MMC_CAP2_CD_ACTIVE_HIGH flag being set incorrectly when the host controller doesn't use a GPIO for card detection (but instead uses a dedicated pin). In this case mmc_gpiod_request_cd() will return before assigning to the gpio_invert variable, leaving the variable uninitialized. The variable then gets used to set the flag. This patch fixes the issue by making sure gpio_invert is set to false when a GPIO isn't used. After this patch, i.MX28 boots fine. The MMC_CAP2_RO_ACTIVE_HIGH (write protect) flag is also set incorrectly for the exact same reason (it uses the same uninitialized variable), so this patch fixes that too. Fixes: 89168b489915 ("mmc: core: restore detect line inversion semantics") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* Merge tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds2014-10-1110-206/+371
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MMC updates from Ulf Hansson: "MMC core: - Fix SDIO IRQ bug - MMC regulator improvements - Fix slot-gpio card detect bug - Add support for Driver Stage Register - Convert the common MMC OF parser to use GPIO descriptors - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk() - Some additional minor fixes MMC host: - mmci: Support Qualcomm specific DML layer for DMA - dw_mmc: Use common MMC regulators - dw_mmc: Add support for Rock-chips RK3288 - tmio: Enable runtime PM support - tmio: Add support for R-Car Gen2 SoCs - tmio: Several fixes and improvements - omap_hsmmc: Removed Balaji from MAINTAINERS - jz4740: add DMA and pre/post support - sdhci: Add support for Intel Braswell - sdhci: Several fixes and improvements" * tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc: (119 commits) ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board mmc: sdhci-acpi: Fix Braswell eMMC timeout clock frequency mmc: sdhci-acpi: Pass HID and UID to probe_slot mmc: sdhci-acpi: Get UID directly from acpi_device mmc, sdhci, bcm-kona, LLVMLinux: Remove use of __initconst mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency mmc: sdhci: Let a driver override timeout clock frequency mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers mmc: sdhci: Add quirk for always getting TC with stop cmd mmc: core: restore detect line inversion semantics mmc: Fix incorrect warning when setting 0 Hz via debugfs mmc: Fix use of wrong device in mmc_gpiod_free_cd() mmc: atmel-mci: fix mismatched section on atmci_cleanup_slot mmc: rtsx_pci: Set power related cap2 macros mmc: core: Add new power_mode MMC_POWER_UNDEFINED mmc: sdhci: execute tuning when device is not busy mmc: atmel-mci: Release mmc resources on failure in probe ..
| * mmc: core: restore detect line inversion semanticsLinus Walleij2014-10-022-6/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 98e90de99a0c43bd434da814c882c4332441871e "mmc: host: switch OF parser to use gpio descriptors" switched the semantic behaviour of card detect and read only flags such that the inversion capability flag would only be set if inversion was explicitly specified in the device tree, in the hopes that no-one was using double inversion. It turns out that the XOR:ing between the explicit inversion was indeed in use, so we need to restore the old semantics where both ways of inversion are checked and the end result XOR:ed. Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: Fix incorrect warning when setting 0 Hz via debugfsAdrian Hunter2014-09-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It is possible to turn off the card clock by setting the frequency to zero via debugfs e.g. echo 0 > /sys/kernel/debug/mmc0/clock However that produces an incorrect warning that is designed to warn if the frequency is below the minimum operating frequency. So correct the warning. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: Fix use of wrong device in mmc_gpiod_free_cd()Adrian Hunter2014-09-291-1/+1
| | | | | | | | | | | | | | | | | | | | mmc_gpiod_free_cd() is paired with mmc_gpiod_request_cd() and both must reference the same device which is the actual host controller device not the mmc_host class device. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: core: Add new power_mode MMC_POWER_UNDEFINEDRoger Tseng2014-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Add MMC_POWER_UNDEFINED for power_mode in struct mmc_ios and use it as the initial value of host->ios.power_mode. For hosts with MMC_CAP2_NO_PRESCAN_POWERUP, this makes the later mmc_power_off() do real power-off things instead of NOP, and further prevents state messed up in cards that was already initialized (eg. by BIOS of UEFI driver). Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: Convert pr_warning to pr_warnJoe Perches2014-09-247-45/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | Use the much more common pr_warn instead of pr_warning. Other miscellanea: o Coalesce formats o Realign arguments o Remove extra spaces when coalescing formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: Consolidate emmc tuning blocksStephen Boyd2014-09-231-0/+32
| | | | | | | | | | | | | | | | | | | | The same tuning block exists in the dw_mmc h.c and sdhci-msm.c files. Move these into mmc.c so that they can be shared across drivers. Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: don't request CD IRQ until mmc_start_host()Stephen Warren2014-09-231-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As soon as the CD IRQ is requested, it can trigger, since it's an externally controlled event. If it does, delayed_work host->detect will be scheduled. Many host controller probe()s are roughly structured as: *_probe() { host = sdhci_pltfm_init(); mmc_of_parse(host->mmc); rc = sdhci_add_host(host); if (rc) { sdhci_pltfm_free(); return rc; } In 3.17, CD IRQs can are enabled quite early via *_probe() -> mmc_of_parse() -> mmc_gpio_request_cd() -> mmc_gpiod_request_cd_irq(). Note that in linux-next, mmc_of_parse() calls mmc_gpio*d*_request_cd() rather than mmc_gpio_request_cd(), and mmc_gpio*d*_request_cd() doesn't call mmc_gpiod_request_cd_irq(). However, this issue still exists if mmc_gpio_request_cd() is called directly before mmc_start_host(). sdhci_add_host() may fail part way through (e.g. due to deferred probe for a vmmc regulator), and sdhci_pltfm_free() does nothing to unrequest the CD IRQ nor cancel the delayed_work. sdhci_pltfm_free() is coded to assume that if sdhci_add_host() failed, then the delayed_work cannot (or should not) have been triggered. This can lead to the following with CONFIG_DEBUG_OBJECTS_* enabled, when kfree(host) is eventually called inside sdhci_pltfm_free(): WARNING: CPU: 2 PID: 6 at lib/debugobjects.c:263 debug_print_object+0x8c/0xb4() ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x18 The object being complained about is host->detect. There's no need to request the CD IRQ so early; mmc_start_host() already requests it. For most SDHCI hosts at least, the typical call path that does this is: *_probe() -> sdhci_add_host() -> mmc_add_host() -> mmc_start_host(). Therefore, remove the call to mmc_gpiod_request_cd_irq() from mmc_gpio_request_cd(). This also matches mmc_gpio*d*_request_cd(), which already doesn't call mmc_gpiod_request_cd_irq(). However, some host controller drivers call mmc_gpio_request_cd() after mmc_start_host() has already been called, and assume that this will also call mmc_gpiod_request_cd_irq(). Update those drivers to explicitly call mmc_gpiod_request_cd_irq() themselves. Ideally, these drivers should be modified to move their call to mmc_gpio_request_cd() before their call to mmc_add_host(). However that's too large a change for stable. This solves the problem (eliminates the kernel error message above), since it guarantees that the IRQ can't trigger before mmc_start_host() is called. The critical point here is that once sdhci_add_host() calls mmc_add_host() -> mmc_start_host(), sdhci_add_host() is coded not to fail. In other words, if there's a chance that mmc_start_host() may have been called, and CD IRQs triggered, and the delayed_work scheduled, sdhci_add_host() won't fail, and so cleanup is no longer via sdhci_pltfm_free() (which doesn't free the IRQ or cancel the work queue) but instead must be via sdhci_remove_host(), which calls mmc_remove_host() -> mmc_stop_host(), which does free the IRQ and cancel the work queue. CC: Russell King <linux@arm.linux.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: Checks EXT_CSD_PARTITION_SETTING_COMPLETED before partitions computationGrégory Soutadé2014-09-191-37/+44
| | | | | | | | | | | | | | | | | | | | | | | | Checks EXT_CSD_PARTITION_SETTING_COMPLETED bit before computing enhanced user area offset and size, and adding mmc general purpose partitions. The two needs EXT_CSD_PARTITION_SETTING_COMPLETED bit be set to be valid (as described in JEDEC standard). Warn user in case of misconfiguration. Signed-off-by: Grégory Soutadé <gsoutade@neotion.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: Replace "enhanced_area_en" attribute by "partition_setting_completed"Grégory Soutadé2014-09-191-5/+8
| | | | | | | | | | | | | | | | | | | | Replace ext_csd "enhanced_area_en" attribute by "partition_setting_completed". It was used whether or not enhanced user area is defined and without checks of EXT_CSD_PARTITION_SETTING_COMPLETED bit. Signed-off-by: Grégory Soutadé <gsoutade@neotion.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: Move code that manages user area and gp partitions into functionsGrégory Soutadé2014-09-191-73/+89
| | | | | | | | | | | | | | | | Move code that manages user area and general purpose partitions into functions. Signed-off-by: Grégory Soutadé <gsoutade@neotion.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: host: switch OF parser to use gpio descriptorsLinus Walleij2014-09-091-45/+23
| | | | | | | | | | | | | | | | | | | | | | | | This switches the central MMC OF parser to use gpio descriptors instead of grabbing GPIOs explicitly from the device tree. This strips out an unecessary use of the integer-based GPIO API that we want to get rid of, cuts down on code as the gpio descriptor code will handle active low flags. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: slot-gpio: add gpiod variant to get wp GPIOLinus Walleij2014-09-091-0/+48
| | | | | | | | | | | | | | | | | | | | This makes it possible to get the write protect (read only) GPIO line from a GPIO descriptor. Written to exactly mirror the card detect function. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: slot-gpio: switch to use flags when getting GPIOLinus Walleij2014-09-091-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the slot GPIO driver gets the GPIO to be used for card detect, it is now possible to specify a flag to have the line set up as input. Get rid of the explicit setup call for input and use the flag. The extra argument works as there are transition varargs macros in place in the <linux/gpio/consumer.h> header, in the future we will make the flags argument compulsory. Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
OpenPOWER on IntegriCloud