summaryrefslogtreecommitdiffstats
path: root/drivers/misc
Commit message (Collapse)AuthorAgeFilesLines
* iwmc3200top: simplify imwct_txTomas Winkler2009-12-233-23/+19
| | | | | | | | | 1. remove address argument since we use same address IWMC_SDIO_DATA_ADDR in all cases 2. add __iwmct_tx - non locking tx function for already locked contexts Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* iwmc3200top: cleanup log messagesTomas Winkler2009-12-233-34/+48
| | | | | | | | | | | 1. add TRACE level 2. use TRACE where needed to reduce the noise 3 don't INFOEX from driver 4. add DUMP level for packets dumps 5. use correct context for the log messages Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* iwmc3200top: clean up fw_downloadTomas Winkler2009-12-231-14/+6
| | | | | | | | | | 1. removed redundant NULL-pointers checks in iwmct_fw_load as release_firmware and kfree are NULL pointer friendly 2. remove redundant memset of the parser since the structure is fully initialized in iwmct_fw_parser_init function Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2009-12-171-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (40 commits) [SCSI] 3w-9xxx fix bug in sgl loading [SCSI] fcoe, libfc: adds enable/disable for fcoe interface [SCSI] libfc: reduce hold time on SCSI host lock [SCSI] libfc: remote port gets stuck in restart state without really restarting [SCSI] pm8001: misc code cleanup [SCSI] pm8001: enable read HBA SAS address from VPD [SCSI] pm8001: do not reset local sata as it will not be found if reset [SCSI] pm8001: bit set pm8001_ha->flags [SCSI] pm8001:fix potential NULL pointer dereference [SCSI] pm8001: set SSC down-spreading only to get less errors on some 6G device. [SCSI] pm8001: fix endian issues with SAS address [SCSI] pm8001: enhance error handle for IO patch [SCSI] pm8001: Fix for sata io circular lock dependency. [SCSI] hpsa: add driver for HP Smart Array controllers. [SCSI] cxgb3i: always use negative errno in case of error [SCSI] bnx2i: minor code cleanup and update driver version [SCSI] bnx2i: Task management ABORT TASK fixes [SCSI] bnx2i: update CQ arming algorith for 5771x chipsets [SCSI] bnx2i: Adjust sq_size module parametr to power of 2 only if a non-zero value is specified [SCSI] bnx2i: Add 5771E device support to bnx2i driver ...
| * [SCSI] enclosure: fix oops while iterating enclosure_status arrayJames Bottomley2009-12-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on patch originally by Jeff Mahoney <jeffm@suse.com> enclosure_status is expected to be a NULL terminated array of strings but isn't actually NULL terminated. When writing an invalid value to /sys/class/enclosure/.../.../status, it goes off the end of the array and Oopses. Fix by making the assumption true and adding NULL at the end. Reported-by: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | cs5535: CS5535_MFGPT_DEFAULT_IRQ should depend on CS5535_MFGPTGeert Uytterhoeven2009-12-171-0/+1
| | | | | | | | | | | | | | | | | | | | It doesn't make much sense to have CS5535_MFGPT_DEFAULT_IRQ show up in configs that cannot have CS5535_MFGPT. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'release' of ↵Linus Torvalds2009-12-161-13/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (117 commits) ACPI processor: Fix section mismatch for processor_add() ACPI: Add platform-wide _OSC support. ACPI: cleanup pci_root _OSC code. ACPI: Add a generic API for _OSC -v2 msi-wmi: depend on backlight and fix corner-cases problems msi-wmi: switch to using input sparse keymap library msi-wmi: replace one-condition switch-case with if statement msi-wmi: remove unused field 'instance' in key_entry structure msi-wmi: remove custom runtime debug implementation msi-wmi: rework init msi-wmi: remove useless includes X86 drivers: Introduce msi-wmi driver Toshiba Bluetooth Enabling driver (RFKill handler v3) ACPI: fix for lapic_timer_propagate_broadcast() acpi_pad: squish warning ACPI: dock: minor whitespace and style cleanups ACPI: dock: add struct dock_station * directly to platform device data ACPI: dock: dock_add - hoist up platform_device_register_simple() ACPI: dock: remove global 'dock_device_name' ACPI: dock: combine add|alloc_dock_dependent_device (v2) ...
| * \ Merge branch 'dell-laptop' into releaseLen Brown2009-12-151-13/+0
| |\ \
| | * | dell-laptop: remove duplicate Kconfig entry under drivers/miscAlan Jenkins2009-12-101-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This showed up as an unselectable option when using xconfig and searching for "dell". It must been overlooked when dell-laptop was moved to drivers/platform/x86. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
* | | | gru: send cross partition interrupts using the gruJack Steiner2009-12-162-15/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GRU Message queue instructions are used to deliver messages to other SSIs within the numalink domain. In most cases, a single GRU mesq instruction will deliver both the message AND an interrupt to notify the other SSI that a messsage is present. In some cases, however, the interrupt must be sent explicitly. To improve resilency, the GRU driver should send these explicit interrupts using the GRU to write the remote chipset register. Current code sends the interrupt using a cpu instruction to write the chipset register. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: update driver version numberJack Steiner2009-12-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the version number of the GRU driver. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: improve GRU TLB dropin statisticsJack Steiner2009-12-164-14/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the TLB dropin statistics kept for each GRU context. Count TLB dropins separate from the misses - some misses do not result in a TLB dropin. Some of the diagnostics need both counts. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: fix GRU interrupt race at deallocateJack Steiner2009-12-163-7/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a race where an interrupt could be received for a GRU context that has been deallocated. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: add hugepage supportJack Steiner2009-12-161-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for hugepages. Easier than I originally thought. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: fix bug in allocation of kernel contextsJack Steiner2009-12-161-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a bug in the assignment of GRU contexts used for kernel functions. If a sleep occurs on the wait for a semaphore, the thread could switch cpus and allocate resources on the wrong blade. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: update GRU structures to match latest hardware specJack Steiner2009-12-162-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a few new definitions for chipset MMR field names. This matches rev 0.7 of the hardware spec. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: check for correct GRU chiplet assignmentJack Steiner2009-12-161-14/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify the code that checks for correct assignment of GRU contexts to users. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: remove stray local_irq_enableJack Steiner2009-12-161-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove a stray local_irq_enable() in the GRU TLB dropin code. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: add symbolic names for GRU error codeJack Steiner2009-12-161-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use symbol names instead of numbers for error return values for the vtop functions. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: fix bug in exception handlingJack Steiner2009-12-161-8/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a GRU driver bug converting a CBR address to the context that contains the CBR. The conversion is rarely done so performance does not matter. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: preload tlb for bcopy instructionsJack Steiner2009-12-169-16/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add anticipatory TLB dropins for GRU TLB misses that occur on BCOPY instructions that copy large amounts of data. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: expicitly set instruction status to activeJack Steiner2009-12-162-56/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Explicitly set GRU instructions to "ACTIVE". This eliminates the need for barriers that would have been necessary to prevent reading the instruction "status" field before the GRU had actually started the instruction. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: add additional GRU statisticsJack Steiner2009-12-168-48/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add additional GRU statistics & debug messages. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: update irq infrastructureJack Steiner2009-12-164-70/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the GRU irq allocate/free functions to use the latest upstream infrastructure. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: fix prefetch and speculation bugsJack Steiner2009-12-165-6/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix several bugs related to prefetch, ordering & speculation: - GRU cch_allocate() instruction causes cacheable memory to be created. Add a barriers to prevent speculation from prefetching data before it exists. - Add memory barriers before cache-flush instructions to ensure that previously stored data is included in the line flushed to memory. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: check for valid vmaJack Steiner2009-12-161-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix bug caused by failure to allocate a GRU gts structure. The old code failed to handle the case where the vma was invalid. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: add test for gru_copy_gpaJack Steiner2009-12-161-9/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve existing driver self-tests. Add a new debugging test to the SGI GRU driver for verifying the global GRU copy function. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: add debug option for cache flushingJack Steiner2009-12-162-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a debug option to the SGI GRU driver for flushing GRU cache lines from memory. In theory this is not needed but it is useful for debugging. This has no use by end users. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: handle failures to mmu_notifier_registerJack Steiner2009-12-163-11/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under some conditions, mmu_notifier_register() will fail to register a mmu_notifier. Fix the GRU driver to correctly handle these failures. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: support 64-bit GRU addressesJack Steiner2009-12-161-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase the maximum address supported by the SGI GRU driver to a full 64 bits. Note that GRU addresses are not always the same as socket virtual addresses. Sockets may not necessarily support the full 64 bits. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: improve messages for malfunctioning GRUsJack Steiner2009-12-162-3/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve error messages for malfunctioning GRUs. Identify the type of instruction that is failing. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: fix bug in module unloadJack Steiner2009-12-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix bug in module unload. Previous code was not correctly deleting the files in /proc. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: allow users to specify gru chiplet 3Jack Steiner2009-12-163-29/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch builds on the infrastructure introduced in the patches that allow user specification of GRU blades & chiplets for context allocation. This patch simplifies the algorithms for migrating GRU contexts between blades. No new functionality is introduced. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: allow users to specify gru chiplet 2Jack Steiner2009-12-166-80/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support to the GRU driver to allow users to specify the blade & chiplet for allocation of GRU contexts. Add new statistics for context loading/unloading/retargeting. Also deleted a few GRU stats that were no longer being unused. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: allow users to specify gru chiplet 1Jack Steiner2009-12-164-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add table & user request infrastructure that is needed to allow users to specify the blade and chiplet for allocation of GRU contexts. Use of this information is in a subsequent patch. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: handle blades without memoryJack Steiner2009-12-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not use alloc_pages_exact_node() to allocate GRU tables. If a blade has no local memory, nid will be -1. Use alloc_pages_node() instead. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: fix istatus race in GRU tlb dropinJack Steiner2009-12-161-29/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TLB dropins require updates to the CBR instruction istatus field. This is needed to resolve race conditions in the chip. The code currently uses the user address of the CBR. This works but opens up additional endcases related to stealing of contexts and accessing the CBR from tasks that do not have access to the user address space. (Some of this non-user task access is debug code that is not currently being pushed to the community). User CBRs are also directly accessible using the kernel mapping of the CBR. Change the TLB dropin code to use the the kernel mapping of the CBR. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: add comments raised in previous code reviewsJack Steiner2009-12-162-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add comments from previous code reviews. The comments help explain some of the more esoteric aspects of the driver. Move a free() to the other side of an unlock. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | gru: initial GRU based on blade topologyJack Steiner2009-12-161-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the GRU initialization code to initialize based on blade topology instead of node topology. The result is the same but blade-based initialization is cleaner. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | UV - XPC: pass nasid instead of nid to gru_create_message_queueRobin Holt2009-12-161-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the UV xpc code is passing nid to the gru_create_message_queue instead of nasid as it expects. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | x86: uv: XPC receive message reuse triggers invalid BUG_ON()Robin Holt2009-12-161-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was a difficult bug to trip. XPC was in the middle of sending an acknowledgement for a received message. In xpc_received_payload_uv(): . ret = xpc_send_gru_msg(ch->sn.uv.cached_notify_gru_mq_desc, msg, sizeof(struct xpc_notify_mq_msghdr_uv)); if (ret != xpSuccess) XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret); msg->hdr.msg_slot_number += ch->remote_nentries; at the point in xpc_send_gru_msg() where the hardware has dispatched the acknowledgement, the remote side is able to reuse the message structure and send a message with a different slot number. This problem is made worse by interrupts. The adjustment of msg_slot_number and the BUG_ON in xpc_handle_notify_mq_msg_uv() which verifies the msg_slot_number is consistent are only used for debug purposes. Since a fix for this that preserves the debug functionality would either have to infringe upon the payload or allocate another structure just for debug, I decided to remove it entirely. Signed-off-by: Robin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | X86: uv: xpc_make_first_contact hang due to not accepting ACTIVE stateRobin Holt2009-12-161-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many times while the initial connection is being made, the contacted partition will send back both the ACTIVATING and the ACTIVE remote_act_state changes in very close succescion. The 1/4 second delay in the make first contact loop is large enough to nearly always miss the ACTIVATING state change. Since either state indicates the remote partition has acknowledged our state change, accept either. Signed-off-by: Robin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | x86: uv: xpc NULL deref when mesq becomes emptyRobin Holt2009-12-161-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under heavy load conditions, our set of xpc messages may become exhausted. The code handles this correctly with the exception of the management code which hits a NULL pointer dereference. Signed-off-by: Robin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | x86: uv: update XPC to handle updated BIOS interfaceRobin Holt2009-12-163-16/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UV BIOS has moved the location of some of their pointers to the "partition reserved page" from memory into a uv hub MMR. The GRU does not support bcopy operations from MMR space so we need to special case the MMR addresses using VLOAD operations. Additionally, the BIOS call for registering a message queue watchlist has removed the 'blade' value and eliminated the structure that was being passed in. This is also reflected in this patch. Signed-off-by: Robin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | X86: uv: implement a gru_read_gpa kernel functionRobin Holt2009-12-165-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BIOS has decided to store a pointer to the partition reserved page in a scratch MMR. The GRU is only able to read an MMR using a vload instruction. The gru_read_gpa() function will implemented. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | x86: uv: xpc needs to provide an abstraction for uv_gpaRobin Holt2009-12-164-0/+24
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide an SGI SN2/UV agnositic method for converting a global physical address into a socket physical address. Signed-off-by: Robin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | cs5535: drop the Geode-specific MFGPT/GPIO codeAndres Salomon2009-12-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With generic modular drivers handling all of this stuff, the geode-specific code can go away. The cs5535-gpio, cs5535-mfgpt, and cs5535-clockevt drivers now handle this. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | cs5535: add a generic MFGPT driverAndres Salomon2009-12-153-0/+395
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is based on the old code on arch/x86/kernel/mfgpt_32.c, except it's not x86 specific, it's modular, and it makes use of a PCI BAR rather than a random MSR. Currently module unloading is not supported; it's uncertain whether or not it can be made work with the hardware. [akpm@linux-foundation.org: add X86 dependency] Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | ioc3/ioc4: various section fixesJean Delvare2009-12-151-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several IOC3 and IOC4 drivers misuse the __devinit and __devexit section markers. Use __init and __exit instead as appropriate, then add __devinit and __devexit where they really belong for PCI drivers. Also make ioc4_serial_init static. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Pat Gefre <pfg@sgi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | drivers/misc: add driver for Texas Instruments DAC7512Daniel Mack2009-12-153-0/+112
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: "H Hartley Sweeten" <hartleys@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud