summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/tvp5150.c
Commit message (Collapse)AuthorAgeFilesLines
* [media] tvp5150: COMPOSITE0 input should not force-enable TV modePaul Walmsley2010-10-211-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When digitizing composite video from a analog videotape source using the TVP5150's first composite input channel, the captured stream exhibits tearing and synchronization problems[1]. It turns out that commit c0477ad9feca01bd8eff95d7482c33753d05c700 caused "TV mode" (as opposed to "VCR mode" or "auto-detect") to be forcibly enabled for both composite inputs. According to the chip documentation[2], "TV mode" disables a "chrominance trap" input filter, which appears to be necessary for high-quality video capture from an analog videotape source. [ Commit c7c0b34c27bbf0671807e902fbfea6270c8f138d subsequently restricted the problem to the first composite input, apparently inadvertently. ] Since any type of composite signal source can be connected to the TVP5150's first composite input, unconditionally forcing "TV mode" isn't correct. There doesn't appear to be a good way for applications to tell the driver what is connected. Fortunately, the TVP5150 has an operating mode auto-detection feature, which, when enabled, should cause the TVP5150 to auto-detect whether it should use "VCR mode" or "TV mode". Enabling operating mode auto-detection improved video capture quality significantly[3]. Therefore, fix this bug by using operating mode auto-detection. (Also, while here, fix a CodingStyle issue.) For those users who may find this patch via a mailing list archive but who are not able to upgrade to a kernel with a fixed driver: the TVP5150's S-Video and second composite input sources have auto-detection enabled, so you may wish to try using those -- if available on your device -- until this fix makes it a downstream distribution near you. 1. Pre-patch tvtime snapshot using a Pinnacle PCTV HD Pro as the capture device and a Sony EV-S2000 as a video source: http://www.booyaka.com/~paul/tvp5150/1a.png 2. Section 3.21.3, "Operation Mode Control Register", _TVP5150AM1 Ultralow-Power NTSC/PAL/SECAM Video Decoder (Rev. D)_ [SLES209D], downloaded 8 October 2010, available via http://focus.ti.com/lit/ds/symlink/tvp5150am1.pdf 3. Post-patch tvtime snapshot (same signal chain as #1, above): http://www.booyaka.com/~paul/tvp5150/1b.png Signed-off-by: Paul Walmsley <paul@booyaka.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: tvp5150: remove obsolete v4l2-i2c-drv.h headerHans Verkuil2010-10-211-6/+21
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: tvp5150: remove obsolete g/s_fmt opsHans Verkuil2010-06-011-20/+0
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: cx18/cx25840/saa7115/tvp5150: remove vbi support from s_fmtHans Verkuil2010-05-191-3/+0
| | | | | | | | Now that s_fmt is no longer used for VBI format setup in subdevs, remove the VBI support from s_fmt. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: tvp5150: support new vbi ops to set/get VBI formatHans Verkuil2010-05-191-25/+41
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: v4l: move vbi-specific video ops to a new vbi ops structHans Verkuil2010-05-191-0/+4
| | | | | | | | | Only a relatively small number of video receivers and transmitters actually support VBI. So start moving the vbi specific ops to an ops struct of their own. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* V4L/DVB (11380): v4l2-subdev: change s_routing prototypeHans Verkuil2009-04-061-9/+12
| | | | | | | | | It is no longer needed to use a struct pointer as argument, since v4l2_subdev doesn't require that ioctl-like approach anymore. Instead just pass the input, output and config (new!) arguments directly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core.Hans Verkuil2009-04-061-1/+1
| | | | | | | | | s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11363): tvp5150: remove i2c legacy code.Hans Verkuil2009-04-061-16/+1
| | | | | | | | All drivers that use tvp5150 now use v4l2_subdev, so we can remove the legacy code from tvp5150. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11311): v4l: replace 'ioctl' references in v4l i2c driversHans Verkuil2009-03-301-4/+4
| | | | | | | | Replace 'VIDIOC_' references in v4l i2c drivers by their new v4l2_subdev callback names. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (10738): Get rid of video_decoder.h header were uneededMauro Carvalho Chehab2009-03-301-1/+0
| | | | | | | | | | | | Now, just a few modules are still dependent of this legacy header: $ grep -l DECODER_ `find linux/drivers/media/ -name '*.[ch]' -exec grep -l video_decoder '{}' \;` linux/drivers/media/video/v4l2-ioctl.c linux/drivers/media/video/indycam.c linux/drivers/media/video/saa7191.c linux/drivers/media/video/vino.c Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (10409): v4l: remove unused I2C_DRIVERIDs.Hans Verkuil2009-03-301-1/+0
| | | | | | | I2C_DRIVERIDs are phased out. Remove those that are unused at the moment. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (10141): v4l2: debugging API changed to match against driver name ↵Hans Verkuil2009-01-021-7/+6
| | | | | | | | | | | | | | | | instead of ID. Since the i2c driver ID will be removed in the near future we have to modify the v4l2 debugging API to use the driver name instead of driver ID. Note that this API is not used in applications other than v4l2-dbg.cpp as it is for debugging and testing only. Should anyone use the old VIDIOC_G_CHIP_IDENT, then this will be logged with a warning that it is deprecated and will be removed in 2.6.30. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9969): tvp5150: add support for VIDIOC_G_CHIP_IDENT ioctlMauro Carvalho Chehab2008-12-301-0/+16
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9958): tvp5150: convert to v4l2_subdev.Hans Verkuil2008-12-301-443/+387
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9363): tvp5150: add support to enable raw vbiMarkus Rechberger2008-12-291-0/+15
| | | | | | Signed-off-by: Markus Rechberger <mrechberger@sundtek.de> [mchehab@redhat.com: Fix bad whitespaces] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8487): videodev: replace videodev.h includes by videodev2.h where ↵Hans Verkuil2008-07-261-1/+1
| | | | | | | | | possible Several V4L2 drivers still included videodev.h. Fix this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7094): static memoryDouglas Schilling Landgraf2008-04-241-1/+1
| | | | | | | | - Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* NULL noise: drivers/mediaAl Viro2008-03-301-2/+2
| | | | | Acked-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* V4L/DVB (7362): tvp5150.c: logical-bitwise and confusionRoel Kluin2008-03-201-2/+2
| | | | | | | logical-bitwise & confusion Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6542): Fix S-video mode on tvp5150Mauro Carvalho Chehab2007-12-111-0/+11
| | | | | | Thanks to Markus Reichberger to point this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6518): Fix tvp5150 default valuesMauro Carvalho Chehab2007-11-041-8/+8
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5739): Replace C code with calls to ARRAY_SIZE macro.Robert P. J. Day2007-07-181-1/+1
| | | | | Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5304): Improve chip matching in v4l2_registerHans Verkuil2007-03-011-1/+1
| | | | | | | | | The chip matching in struct v4l2_register for VIDIOC_DBG_G/S_REGISTER was rather primitive. It could not be extended to other busses besides i2c and it lacked a way to. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5163): Add checks for CAP_SYS_ADMIN to VIDIOC_DBG_G_REGISTERTrent Piepho2007-02-211-10/+4
| | | | | | | | | | Before, root privileges were only needed to set hardware registers, not to read them. On some hardware, reading from the wrong place at the wrong time can hang the machine. So, to be consistent, root privileges are required to read registers on all hardware. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5146): Make VIDIOC_INT_[SG]_REGISTER ioctls no longer internal onlyTrent Piepho2007-02-211-2/+2
| | | | | | | | | | | | | | | | | | | | | The direct register access ioctls were defined as kernel internal only, but they are very useful for debugging hardware from userspace and are used as such. Officially export them. VIDIOC_INT_[SG]_REGISTER is renamed to VIDIOC_DBG_[SG]_REGISTER Definition of ioctl and struct v4l2_register is moved from v4l2-common.h to videodev2.h. Types used in struct v4l2_register are changed to the userspace exportable versions (u32 -> __u32, etc). Use of VIDIOC_DBG_S_REGISTER requires CAP_SYS_ADMIN permission, so move the check into the video_ioctl2() dispatcher so it doesn't need to be duplicated in each driver's call-back function. CAP_SYS_ADMIN check is added to pvrusb2 (which doesn't use video_ioctl2). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4506): TVP5150 routing logic were broken.Mauro Carvalho Chehab2006-09-261-1/+6
| | | | | | | As pointed by The Coverity checker, commit c7c0b34c27bbf0671807e902fbfea6270c8f138d broked input selection. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3712): Fix video input setting of em28xx, use _INT_S_VIDEO_ROUTING ↵Hans Verkuil2006-06-251-16/+29
| | | | | | | | | | | | | | | in tvp5150 - Use new routing input defines in em28xx-cards.c - Fix S-Video settings for tvp5150-based cards (input was copied from saa7115 based cards and worked only because S-Video was selected in the default: case) - Replace VIDIOC_S_INPUT by VIDIOC_INT_S_VIDEO_ROUTING in em28xx-video.c - Remove the now obsolete VIDIOC_S_INPUT handler in saa7115.c - Add VIDIOC_INT_G/S_VIDEO_ROUTING in tvp5150.c - Add new media/tvp5150.h with the routing defines. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3700): Remove obsolete commands from tvp5150.cHans Verkuil2006-04-021-118/+4
| | | | | | | | | | - Remove old DECODER_ commands from tvp5150.c, replacing them with newer ones if appropriate. - Small VIDIOC_G_TUNER fixes in msp3400 and tuner. - Fix VIDIOC_S_TUNER support in em28xx. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3692): Keep experimental SLICED_VBI defines under an #if 0Hans Verkuil2006-04-021-1/+9
| | | | | | | | The sliced VBI defines added in videodev2.h are removed since requires more discussion. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3643): Fix default values for tvp5150 controlsMauro Carvalho Chehab2006-04-021-4/+4
| | | | | | Default values were wrong. Fixing it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3325): Disabled debug on by default in tvp5150Markus Rechberger2006-02-071-1/+1
| | | | | | | disabled debug on by default in tvp5150 Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3281): Added signal detection support to tvp5150Markus Rechberger2006-02-071-0/+11
| | | | | | | - added signal detection support to tvp5150 Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3420): Added iocls to configure VBI on tvp5150Mauro Carvalho Chehab2006-01-231-2/+68
| | | | | | - Added iocls to configure VBI on tvp5150 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3410): Implemented sliced VBI set on VIDIOC_S_FMTMauro Carvalho Chehab2006-01-231-5/+42
| | | | | | - Implemented sliced VBI set on VIDIOC_S_FMT Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3408): Included new sliced VBI types to videodev2.h and tvp5150Mauro Carvalho Chehab2006-01-231-57/+104
| | | | | | | | | | - Added other sliced VBI types to videodev2.h - tvp5150 now uses standard V4L2 API codes from videodev2.h - Implemented VIDIOC_G_SLICED_VBI_CAP for tvp5150. This is dynamically filled based on defined VDP C-RAM values filled by the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3407): added some code for VBI processing and cleanup debug dumpMauro Carvalho Chehab2006-01-231-286/+207
| | | | | | | | | - Renamed some registers and improved register debug message - Some cleanups at register dump - Added code to set VBI processor (VDP) - VBI code still incomplete Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3405): Fixes tvp5150a/am1 detection.Mauro Carvalho Chehab2006-01-231-9/+12
| | | | | | | | | | | | - Tvp5150 type were determined by a secondary register instead of using ROM code. - tvp5150am1 have ROM=4.0, while tvp5150a have ROM=3.33 (decimal). All other ROM versions are reported as unknown tvp5150. - Except for reporting, current code doesn't enable any special feature for tvp5150am1 or tvp5150a. Code should work for both models (but were tested only for tvp5150am1). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* Merge branch 'work'Mauro Carvalho Chehab2006-01-151-1/+1
|\
| * V4L/DVB (3377): make some code staticAdrian Bunk2006-01-151-1/+1
| | | | | | | | | | | | | | - This patch makes some needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* | [PATCH] Unlinline a bunch of other functionsArjan van de Ven2006-01-141-1/+1
|/ | | | | | | | | | | Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* V4L/DVB (3344a): Conversions from kmalloc+memset to k(z|c)allocPanagiotis Issaris2006-01-111-2/+1
| | | | | | | | Conversions from kmalloc+memset to k(z|c)alloc. Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3307): Some cleanups at I2C modulesMauro Carvalho Chehab2006-01-091-7/+6
| | | | | | | | - i2c names shorten - removed obsoleted flags on newer modules - small cleanups Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
* V4L/DVB (3234): Included advanced debug option to tvp5150.cMauro Carvalho Chehab2006-01-091-0/+24
| | | | | | | - Included advanced debug option to tvp5150.c - Now, advanced debug info is the first item at V4L menu. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
* V4L/DVB (3232): Several improvements at tvp5150 driverMauro Carvalho Chehab2006-01-091-61/+362
| | | | | | | | - Now reset do init tvp5150 registers to its default. - Debug messages improved. - Implemented video standard selection function. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
* V4L/DVB (3099): Fixed device controls for em28xx on WinTV USB2 devicesMauro Carvalho Chehab2006-01-091-36/+45
| | | | | | | - Controls now come from video and audio decoder driver for msp3400 and tvp5150. - Added audio and sound controls as provided by msp3400 and tvp5150. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
* [PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer neededGreg Kroah-Hartman2006-01-051-1/+0
| | | | | | | | | | Now that i2c_add_driver() doesn't need the module owner to be set by hand, we can delete it from the drivers. This patch catches all of the drivers that I found in the current tree (if a driver sets the .owner by hand, it's not a problem, just not needed.) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
* [PATCH] i2c: Drop i2c_driver.{owner,name}, 5 of 11Laurent Riffard2006-01-051-2/+4
| | | | | | | | | | | We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the drivers/media/video and usb/media drivers. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Rework client usage count, 2 of 3Jean Delvare2006-01-051-1/+0
| | | | | | | | | Make I2C_CLIENT_ALLOW_USE the default for all i2c clients. It doesn't hurt if the usage count is actually never used for any given driver, and allows for nice code simplifications in i2c-core. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud