summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/bt8xx
Commit message (Collapse)AuthorAgeFilesLines
* V4L/DVB: videobuf: add queue argument to videobuf_waiton()Hans Verkuil2010-10-211-1/+1
| | | | | | | | | | | | | | | | videobuf_waiton() must unlock and relock ext_lock if it has to wait. For that to happen it needs the videobuf_queue pointer. Don't attempt to unlock/relock q->ext_lock unless it was locked in the first place. vb->state has to be protected by a spinlock to be safe. This patch is based on code from Mauro Carvalho Chehab <mchehab@redhat.com>. [mchehab@redhat.com: add extra argument to a few missing places] Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: videobuf: add ext_lock argument to the queue init functionsHans Verkuil2010-10-211-2/+2
| | | | | | | | | Add an ext_lock argument to the videobuf init functions. This allows drivers to pass the vdev->lock pointer (or any other externally held lock) to videobuf. For now all drivers just pass NULL. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: bttv: use unlocked ioctlMauro Carvalho Chehab2010-10-211-7/+7
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: bttv: fix driver lock and remove explicit calls to BKLMauro Carvalho Chehab2010-10-211-58/+143
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: bttv: Fix mutex unbalance at bttv_pollMauro Carvalho Chehab2010-10-211-3/+1
| | | | | | Don't do double mutex_unlock when reading a stream at bttv_poll. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: bttv-driver: document functions using mutex_lockMauro Carvalho Chehab2010-10-211-25/+25
| | | | | | | | | There are a few ancillary static routines used by ioctl functions that takes bttv lock internally. As we'll be adding the same lock for all ioctl's that need, we need to properly document them, to avoid doing double locks Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: bttv: Move PV951 IR to the right driverMauro Carvalho Chehab2010-10-214-49/+87
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Merge branch 'v4l_for_linus' of ↵Linus Torvalds2010-08-131-1/+1
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: v4l2-ctrls.c: needs to include slab.h V4L/DVB: fix Kconfig to depends on VIDEO_IR V4L/DVB: Fix IR_CORE dependencies
| * V4L/DVB: fix Kconfig to depends on VIDEO_IRMauro Carvalho Chehab2010-08-121-1/+1
| | | | | | | | | | | | | | warning: (VIDEO_BT848 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT || VIDEO_SAA7134 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && VIDEO_DEV && PCI && I2C && INPUT || VIDEO_CX88 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && VIDEO_DEV && PCI && I2C && INPUT || VIDEO_IVTV && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && PCI && I2C && INPUT || VIDEO_CX18 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL && INPUT || VIDEO_EM28XX && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT || VIDEO_TLG2300 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT && SND && DVB_CORE || VIDEO_CX231XX && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT || DVB_BUDGET_CI && MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && DVB_BUDGET_CORE && I2C && INPUT || DVB_DM1105 && MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && PCI && I2C && INPUT || VIDEO_GO7007 && STAGING && !STAGING_EXCLUDE_BUILD && VIDEO_DEV && PCI && I2C && INPUT && SND || VIDEO_CX25821 && STAGING && !STAGING_EXCLUDE_BUILD && DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT) selects VIDEO_IR which has unmet direct dependencies (IR_CORE) Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | i2c: Add support for custom probe functionJean Delvare2010-08-111-1/+1
|/ | | | | | | | | The probe method used by i2c_new_probed_device() may not be suitable for all cases. Let the caller provide its own, optional probe function. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: videobuf: Remove the videobuf_sg_dma_map/unmap functionsLaurent Pinchart2010-08-021-1/+1
| | | | | | | | | | Instead of creating dirty wrappers around videobuf_dma_map/unmap that create a dummy videobuf_queue structure, modify videobuf_dma_map/unmap to take a device pointer argument and use it directly. The videobuf_sg_dma_map/unmap then become unused and can be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: v4l2-common: simplify prio utility functionsHans Verkuil2010-05-191-9/+9
| | | | | | | | | | | | | | | v4l2_prio_init/open/close returned an int when in fact they would always return 0. Make these void functions. v4l2_prio_close and v4l2_prio_check pass an enum v4l2_priority as a pointer for no good reason. Replace with a normal enum v4l2_priority argument. These changes will simplify the work of moving priority handling into the v4l core. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: bttv: remove bogus prio check in g_frequencyHans Verkuil2010-05-191-5/+0
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: bttv: Add another ids for IVC-200Kirill Smelkov2010-05-191-0/+4
| | | | | | | | | | | | | I have 3 IVC-200 cards (with 4 video channels on each). 2 of the cards identify theirselves as 000[0-3]:a155 (ids already in cardlist) and another one identifies itself as 080[0-3]:a155, which ids were unknown so far. Note - it's IVC-200, not IVC-200G. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: V4L2: Replace loops for finding max buffers in VIDIOC_REQBUFS callbacksAndreas Bombe2010-05-191-2/+2
| | | | | | | | | | | | | Due to obvious copy and paste coding a number of video capture drivers which implement a limit on the buffer memory decremented the user supplied buffer count in a while loop until it reaches an acceptable value. This is a silly thing to do when the maximum value can be directly computed. Signed-off-by: Andreas Bombe <aeb@debian.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: Make use of the new IR keymap modulesMauro Carvalho Chehab2010-05-191-14/+14
| | | | | | | | Instead of using the ugly keymap sequences, use the new rc-*.ko keymap files. For now, it is still needed to have one keymap loaded, for the RC code to work. Later patches will remove this depenency. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir: prepare IR code for a parameter change at register functionMauro Carvalho Chehab2010-05-191-1/+1
| | | | | | | A latter patch will reuse the ir_input_register with a different meaning. Before it, change all occurrences to a temporary name. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir: use IR_KEYTABLE where an IR table is neededMauro Carvalho Chehab2010-05-191-12/+12
| | | | | | | Replaces most of the occurences of IR keytables on V4L drivers by a macro that evaluates to provide the name of the exported symbol. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: export driver name used by IR via ueventMauro Carvalho Chehab2010-05-181-1/+3
| | | | | | | | Now, both driver and keytable names are exported to userspace. This will help userspace to decide when a table need to be replaced by another one. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-304-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* Merge branch 'for-next' into for-linusJiri Kosina2010-03-081-2/+2
|\ | | | | | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
| * tree-wide: Assorted spelling fixesDaniel Mack2010-02-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | V4L/DVB: bttv: Let the user disable IR supportJean Delvare2010-02-261-2/+7
| | | | | | | | | | | | | | | | | | Add a new module parameter "disable_ir" to disable IR support. Several other drivers do that already, and this can be very handy for debugging purposes. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB (13680): ir: use unsigned long instead of enumMauro Carvalho Chehab2010-02-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When preparing the linux-next patches, I got those errors: include/media/ir-core.h:29: warning: left shift count >= width of type In file included from include/media/ir-common.h:29, from drivers/media/video/ir-kbd-i2c.c:50: drivers/media/video/ir-kbd-i2c.c: In function ‘ir_probe’: drivers/media/video/ir-kbd-i2c.c:324: warning: left shift count >= width of type Unfortunately, enum is 32 bits on i386. As we define IR_TYPE_OTHER as 1<<63, it won't work on non 64 bits arch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB (13634): ir-core: allow passing IR device parameters to ir-coreMauro Carvalho Chehab2010-02-261-2/+2
| | | | | | | | | | | | | | Adds an structure to ir_input_register to contain IR device characteristics, like supported protocols and a callback to handle protocol event changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB: bttv: Move I2C IR initializationJean Delvare2010-02-193-2/+8
|/ | | | | | | | | | | | | | | Move I2C IR initialization from just after I2C bus setup to right before non-I2C IR initialization. This avoids the case where an I2C IR device is blocking audio support (at least the PV951 suffers from this). It is also more logical to group IR support together, regardless of the connectivity. This fixes bug #15184: http://bugzilla.kernel.org/show_bug.cgi?id=15184 Signed-off-by: Jean Delvare <khali@linux-fr.org> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13617): ir: move input_register_device() to happen inside ↵Mauro Carvalho Chehab2009-12-161-5/+2
| | | | | | | | | | | | | | | ir_input_register() We'll need to register a sysfs class for the IR devices. As such, the better is to have the input_register_device()/input_unregister_device() inside the ir register/unregister functions. Also, solves a naming problem with V4L ir_input_init() function, that were, in fact, registering a device. While here, do a few cleanups at budget-ci IR logic. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13616): IR: rename ir_input_free as ir_input_unregisterMauro Carvalho Chehab2009-12-161-2/+2
| | | | | | | Now, ir_input_free does more than just freeing the keytab. Better to rename it as ir_input_unregister. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13602): bttv: fix MODULE_PARM_DESC for i2c_debug and i2c_hwJarod Wilson2009-12-161-1/+1
| | | | | | | | | | Currently, i2c_debug shows up w/o a desc in modinfo, and i2c_hw shows up with i2c_debug's desc. Fix that. [dougsland@redhat.com: fixed checkpatch.pl warning (space between MODULE_PARM_DESC arguments)] Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13597): bttv: add i2c addr for old WinTV card to IR probe listJarod Wilson2009-12-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are old bttv-driven Hauppauge WinTV series cards that have their IR part at i2c addr 0x71, which doesn't get considered in the new 2.6.31 i2c code. From a 2.6.29 kernel: lirc_i2c: chip 0x10005 found @ 0x71 (Hauppauge PVR150) Minor cosmetic glitch, the card in question isn't actually a PVR-150, its: 03:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Hauppauge computer works Inc. WinTV Series Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at f4ffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Kernel driver in use: bttv Kernel modules: bttv Device ID: 0x109e:0x036e, Sub-Device ID: 0x0070:0x13eb This simply adds 0x71 to the list of addresses i2c_new_probed_device should consider, which gets IR working on this card again. Reported-by: Adam Williamson <awilliam@redhat.com> Tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13557): v4l: Remove unneeded video_device::minor usage in driversLaurent Pinchart2009-12-161-11/+4
| | | | | | | | | | | | | | | | The video_device::minor field is used where it shouldn't, either to - test for error conditions that can't happen anymore with the current v4l-dvb core, - store the value in a driver private field that isn't used anymore, - check the video device type where video_device::vfl_type should be used, or - create the name of a kernel thread that should get a stable name. Remove or fix those use cases. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13556): v4l: Remove unneeded video_device::minor assignmentsLaurent Pinchart2009-12-161-2/+0
| | | | | | | | | | | | | Now that the video_device registration is tested using video_is_registered(), drivers don't need to initialize the video_device::minor field to -1 anymore. Remove those unneeded assignments. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13555): v4l: Use video_device_node_name() instead of the minor numberLaurent Pinchart2009-12-161-2/+4
| | | | | | | | | | | | Instead of using the minor number in kernel log messages, use the device node name as returned by the video_device_node_name() function. This makes debug, informational and error messages easier to understand for end users. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13553): v4l: Use the video_is_registered function in device driversLaurent Pinchart2009-12-161-3/+3
| | | | | | | | Fix all device drivers to use the video_is_registered function instead of checking video_device::minor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13550): v4l: Use the new video_device_node_name functionLaurent Pinchart2009-12-161-6/+6
| | | | | | | | | | Fix all device drivers to use the new video_device_node_name function. This also strips kernel log messages from the "/dev/" prefix, has the device node location is a userspace policy decision unknown to the kernel. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocationMauro Carvalho Chehab2009-12-051-1/+6
| | | | | | | | | | | | Currently, the IR table is initialized by calling ir_input_init(). However, this function doesn't return any error code, nor has a function to be called when de-initializing the IR's. Change the return argment to integer and make sure that each driver will handle the error code. Also adds a function to free any resources that may be allocating there: ir_input_free(). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13533): ir: use dynamic tables, instead of static onesMauro Carvalho Chehab2009-12-051-4/+4
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13170): bttv: Fix reversed polarity error when switching video standardMike Isely2009-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bttv driver function which handles switching of the video standard (set_tvnorm() in bttv-driver.c) includes a check which can optionally also reset the cropping configuration to a default value. It is "optional" based on a comparison of the cropcap parameters of the previous vs the newly requested video standard. The comparison is being done with a memcmp(), a function which only returns a true value if the comparison actually fails. This if-statement appears to have been written to assume wrong memcmp() semantics. That is, it was re-initializing the cropping configuration only if the new video standard did NOT have different cropcap values. That doesn't make any sense. One definitely should reset things if the cropcap parameters are different - if there's any comparison to made at all. The effect of this problem was that a transition from, say, PAL to NTSC would leave in place old cropping setup that made sense for the PAL geometry but not for NTSC. If the application doesn't care about cropping it also won't try to reset the cropping configuration, resulting in an improperly cropped video frame. In the case I was testing this actually caused black video frames to be displayed. Another interesting effect of this bug is that if one does something which does NOT change the video standard and this function is run, then the cropping setup gets reset anyway - again because of the backwards comparison. It turns out that just running anything which merely opens and closes the video device node (e.g. v4l-info) will cause this to happen. One can argue that simply opening the device node and not doing anything to it should not mess with any of its state - but because of this behavior, any TV app which does such things (e.g. xawtv) probably therefore doesn't see the problem. The solution is to fix the sense of the if-statement. It's easy to see how this mistake could have been made given how memcmp() works. The patch is therefore removal of a single "!" character from the if-statement in set_tvnorm in bttv-driver.c. Signed-off-by: Mike Isely <isely@pobox.com> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13169): bttv: Fix potential out-of-order field processingMike Isely2009-11-071-4/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a subtle interaction in the bttv driver which can result in fields being repeatedly processed out of order. This is a problem specifically when running in V4L2_FIELD_ALTERNATE mode (probably the most common case). 1. The determination of which fields are associated with which buffers happens in videobuf, before the bttv driver gets a chance to queue the corresponding DMA. Thus by the point when the DMA is queued for a given buffer, the algorithm has to do the queuing based on the buffer's already assigned field type - not based on which field is "next" in the video stream. 2. The driver normally tries to queue both the top and bottom fields at the same time (see bttv_irq_next_video()). It tries to sort out top vs bottom by looking at the field type for the next 2 available buffers and assigning them appropriately. 3. However the bttv driver *always* actually processes the top field first. There's even an interrupt set aside for specifically recognizing when the top field has been processed so that it can be marked done even while the bottom field is still being DMAed. Given all of the above, if one gets into a situation where bttv_irq_next_video() gets entered when the first available buffer has been pre-associated as a bottom field, then the function is going to process the buffers out of order. That first available buffer will be put into the bottom field slot and the buffer after that will be put into the top field slot. Problem is, since the top field is always processed first by the driver, then that second buffer (the one after the first available buffer) will be the first one to be finished. Because of the strict fifo handling of all video buffers, then that top field won't be seen by the app until after the bottom field is also processed. Worse still, the app will get back the chronologically later bottom field first, *before* the top field is received. The buffer's timestamps will even be backwards. While not fatal to most TV apps, this behavior can subtlely degrade userspace deinterlacing (probably will cause jitter). That's probably why it has gone unnoticed. But it will also cause serious problems if the app in question discards all but the latest received buffer (a latency minimizing tactic) - causing one field to only ever be displayed since the other is now always late. Unfortunately once you get into this state, you're stuck this way - because having consumed two buffers, now the next time around the "first" available buffer will again be a bottom field and the same thing happens. How can we get into this state? In a perfect world, where there's always a few free buffers queued to the driver, it should be impossible. However if something disrupts streaming, e.g. if the userspace app can't queue free buffers fast enough for a moment due perhaps to a CPU scheduling glitch, then the driver can get momentarily starved and some number of fields will be dropped. That's OK. But if an odd number of fields get dropped, then that "first" available buffer might be the bottom field and now we're stuck... This patch fixes that problem by deliberately only setting up a single field for one frame if we don't get a top field as the first available buffer. By purposely skipping the other field, then we only handle a single buffer thus bringing things back into proper sync (i.e. top field first) for the next frame. To do this we just drop the few lines in bttv_irq_next_video() that attempt to set up the second buffer when that second buffer isn't for the bottom field. This is definitely a problem in when in V4L2_FIELD_ALTERNATE mode. In the other modes this change either has no effect or doesn't harm things any further anyway. Signed-off-by: Mike Isely <isely@pobox.com> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friendsHans Verkuil2009-09-191-22/+22
| | | | | | | | | | Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr. This simplifies this API substantially. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12595): common/ir: use a struct for keycode tablesMauro Carvalho Chehab2009-09-121-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, V4L uses a scancode table whose index is the scancode and the value is the keycode. While this works, it has some drawbacks: 1) It requires that the scancode to be at the range 00-7f; 2) keycodes should be masked on 7 bits in order for it to work; 3) due to the 7 bits approach, sometimes it is not possible to replace the default keyboard to another one with a different encoding rule; 4) it is different than what is done with dvb-usb approach; 5) it requires a typedef for it to work. This is not a recommended Linux CodingStyle. This patch is part of a larger series of IR changes. It basically replaces the IR_KEYTAB_TYPE tables by a structured table: struct ir_scancode { u16 scancode; u32 keycode; }; This is very close to what dvb does. So, a further integration with DVB code will be easy. While we've changed the tables, for now, the IR keycode handling is still based on the old approach. The only notable effect is the redution of about 35% of the ir-common module size: text data bss dec hex filename 6721 29208 4 35933 8c5d old/ir-common.ko 5756 18040 4 23800 5cf8 new/ir-common.ko In thesis, we could be using above u8 for scancode, reducing even more the size of the module, but defining it as u16 is more convenient, since, on dvb, each scancode has up to 16 bits, and we currently have a few troubles with rc5, as their scancodes are defined with more than 8 bits. This patch itself shouldn't be doing any functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12585): Add remote support to cph03x bttv cardMauro Carvalho Chehab2009-09-122-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hello kernel developers. I found a bug report from an user in launchpad. I just copy it here. It includes patch. I don't own the necessary hardware to test it but the patch looks trivial. I'm not subscribed to this list, so please CC me. Thanks! Here is the text: """ remote control for my tv card doesnt work I have Askey CPH03x TV Capturer. When I load bttv module with "card=59" option which is proper for this tv card, I can watch tv with sound but my remote control doesnt work. There is no ir event in /proc/bus/input/device . When bttv module is loaded with "card=137" option remote control works very well. $ cat /proc/bus/input/devices ....... ........ : Bus=0001 Vendor=109e Product=0350 Version=0001 N: Name="bttv IR (card=137)" P: Phys=pci-0000:00:0d.0/ir0 S: Sysfs=/devices/pci0000:00/0000:00:0d.0/input/input144 U: Uniq= H: Handlers=kbd event6 B: EV=100003 B: KEY=2c0814 100004 0 0 0 4 2008000 2090 2001 1e0000 4400 0 ffc Unfortunately there is no sound. """ https://bugs.launchpad.net/ubuntu/+bug/239733 http://bugzilla.kernel.org/show_bug.cgi?id=11995 -- Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12343): Stop defining I2C adapter IDs nobody usesJean Delvare2009-09-121-2/+0
| | | | | | | | | There is no point in defining I2C adapter IDs when no code is using them. As this field might go away in the future, stop using it when we don't need to. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12214): bttv: set RDS capability if applicable.Hans Verkuil2009-09-121-0/+2
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12204): bttv and meye: Use PCI_VDEVICEJoe Perches2009-09-121-8/+4
| | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12300): bttv: fix regression: tvaudio must be loaded before tunerHans Verkuil2009-07-243-44/+50
| | | | | | | | | | | | Both tvaudio and the tuner share i2c address 0x42. The tvaudio module can check whether it really is a tda9840, but the tuner can't. So the tvaudio module must be loaded before the tuner module. This was also the case for 2.6.29, but the order was swapped in 2.6.30. Thanks to Krzysztof Grygiencz for reporting and testing this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* headers: smp_lock.h reduxAlexey Dobriyan2009-07-121-0/+1
| | | | | | | | | | | | | * Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* V4L/DVB (12004): poll method lose race conditionFigo.zhang2009-06-161-4/+7
| | | | | | | bttv-driver.c,cx23885-video.c,cx88-video.c: poll method lose race condition for capture video. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11895): bt8xx: remove always false ifFilipe Rosset2009-06-161-1/+1
| | | | | | | | Remove always false if over unsigned int variable Signed-off-by: Filipe Rosset <rosset.filipe@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11853): minor have assigned value twicefigo.zhang2009-06-161-1/+0
| | | | | | | | | | | The variable minor have assigned value twice, the first time is in the initial "video_device" data struct in those drivers, pls see saa7134-video.c,line 2503. --- Signed-off-by: Figo.zhang <figo.zhang@kolorific.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
OpenPOWER on IntegriCloud