summaryrefslogtreecommitdiffstats
path: root/drivers/md
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] drivers/md: fix-up schedule_timeout() usageNishanth Aravamudan2005-11-072-4/+2
| | | | | | | | | | Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [BLOCK] Unify the seperate read/write io stat fields into arraysJens Axboe2005-11-018-54/+26
| | | | | | | | | | Instead of having ->read_sectors and ->write_sectors, combine the two into ->sectors[2] and similar for the other fields. This saves a branch several places in the io path, since we don't have to care for what the actual io direction is. On my x86-64 box, that's 200 bytes less text in just the core (not counting the various drivers). Signed-off-by: Jens Axboe <axboe@suse.de>
* [PATCH] Use sg_set_buf/sg_init_one where applicableDavid Hardeman2005-10-301-8/+4
| | | | | | | | | | | | | This patch uses sg_set_buf/sg_init_one in some places where it was duplicated. Signed-off-by: David Hardeman <david@2gen.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* [PATCH] gfp_t: remaining bits of drivers/*Al Viro2005-10-282-2/+2
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: make sure mdthreads will always respond to kthread_stopNeilBrown2005-10-261-4/+6
| | | | | | | | | | | There are still a couple of cases where md threads (the resync/recovery thread) is not interruptible since the change to use kthreads. All places there it tests "signal_pending", it should also test kthread_should_stop, as with this patch. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Three one-liners in md.cNeilBrown2005-10-191-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The main problem fixes is that in certain situations stopping md arrays may take longer than you expect, or may require multiple attempts. This would only happen when resync/recovery is happening. This patch fixes three vaguely related bugs. 1/ The recent change to use kthreads got the setting of the process name wrong. This fixes it. 2/ The recent change to use kthreads lost the ability for md threads to be signalled with SIG_KILL. This restores that. 3/ There is a long standing bug in that if: - An array needs recovery (onto a hot-spare) and - The recovery is being blocked because some other array being recovered shares a physical device and - The recovery thread is killed with SIG_KILL Then the recovery will appear to have completed with no IO being done, which can cause data corruption. This patch makes sure that incomplete recovery will be treated as incomplete. Note that any kernel affected by bug 2 will not suffer the problem of bug 3, as the signal can never be delivered. Thus the current 2.6.14-rc kernels are not susceptible to data corruption. Note also that if arrays are shutdown (with "mdadm -S" or "raidstop") then the problem doesn't occur. It only happens if a SIGKILL is independently delivered as done by 'init' when shutting down. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] gfp flags annotations - part 1Al Viro2005-10-086-8/+8
| | | | | | | | | | | | - added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper: Fix queue_if_no_path initialisationAlasdair G Kergon2005-09-281-6/+10
| | | | | | | | | | | | | | | | | | When creating a multipath device, if the queue_if_no_path parameter is specified it gets ignored. While the queue_if_no_path variable is correctly set to 1, the saved_queue_if_no_path gets set to 0. When the device is subsequently made live (resumed), the saved value (0) always overwrites the live value (1) so the option *always* gets turned off. The fix adds a parameter to the queue_if_no_path() function to indicate whether the previous value should be preserved or not - if not, as when the device is being set up, the saved value is set to the new value (1). Signed-Off-By: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper: Trigger an event when a table is deletedgoggin, edward2005-09-281-0/+9
| | | | | | | | | | | If anything is waiting on a device's table when the device is removed, we must first wake it up so it will release its reference. Otherwise the table's reference count will not drop to zero and the table will not get removed. Signed-Off-By: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] RAID6 Altivec fixH. Peter Anvin2005-09-174-10/+40
| | | | | | | | | This patch fixes a signedness bug with RAID6 for Altivec, and makes the Altivec code testable in userspace. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] merge some from Rusty's trivial patchesAdrian Bunk2005-09-101-2/+2
| | | | | | | | | | | This patch contains the most trivial from Rusty's trivial patches: - spelling fixes - remove duplicate includes Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] vfree and kfree cleanup in drivers/Jesper Juhl2005-09-101-6/+3
| | | | | | | | | | | | This patch does a full cleanup of 'NULL checks before vfree', and a partial cleanup of calls to kfree for all of drivers/ - the kfree bit is partial in that I only did the files that also had vfree calls in them. The patch also gets rid of some redundant (void *) casts of pointers being passed to [vk]free, and a some tiny whitespace corrections also crept in. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix BUG when raid10 rebuilds without enough drivesNeilBrown2005-09-091-1/+7
| | | | | | | | This shouldn't be a BUG. We should cope. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix raid10 assembly when too many devices are missingNeilBrown2005-09-091-3/+27
| | | | | | | | | | | | If you try to assemble an array with too many missing devices, raid10 will now reject the attempt, instead of allowing it. Also check when hot-adding a drive and refuse the hot-add if the array is beyond hope. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: really get sb_size setting right in all casesNeilBrown2005-09-091-2/+2
| | | | | | | | | | There was another case where sb_size wasn't being set, so instead do the sensible thing and set if when filling in the content of a superblock. That ensures that whenever we write a superblock, the sb_size MUST be set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: make sure the new 'sb_size' is set properly device added without ↵NeilBrown2005-09-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | pre-existing superblock. There are two ways to add devices to an md/raid array. It can have superblock written to it, and then given to the md driver, which will read the superblock (the new way) or md can be told (through SET_ARRAY_INFO) the shape of the array, and the told about individual drives, and md will create the required superblock (the old way). The newly introduced sb_size was only set for drives being added the new way, not the old ways. Oops :-( Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: report spare drives in /proc/mdstatNeilBrown2005-09-091-1/+2
| | | | | | | | Just like failed drives have (F), so spare drives now have (S). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: add information about superblock version to /proc/mdstatNeilBrown2005-09-091-0/+9
| | | | | | | | | Leave it unchanged if the original (0.90) is used, incase it might be a compatability problem. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: use queue_hardsect_size instead of block_size for md superblock ↵NeilBrown2005-09-091-1/+1
| | | | | | | | | | size calc. Doh. I want the physical hard-sector-size, not the current block size... Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: choose better default offset for bitmap.NeilBrown2005-09-091-2/+1
| | | | | | | | | | On reflection, a better default location for hot-adding bitmaps with version-1 superblocks is immediately after the superblock. There might not be much room there, but there is usually atleast 3k, and that is a good start. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: tidy up daemon stop/start code in md/bitmap.cNeilBrown2005-09-092-47/+28
| | | | | | | | | | | | The bitmap code used to have two daemons, so there is some 'common' start/stop code. But now there is only one, so the common code is just noise. This patch tidies this up somewhat. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: ensure bitmap_writeback_daemon handles shutdown properly.NeilBrown2005-09-091-0/+3
| | | | | | | | | | mddev->bitmap gets clearred before the writeback daemon is stopped. So the write_back daemon needs to be careful not to dereference the 'bitmap' if it is NULL. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: use kthread infrastructure in mdNeilBrown2005-09-091-38/+10
| | | | | | | | | | | | | Switch MD to use the kthread infrastructure, to simplify the code and get rid of tasklist_lock abuse in md_unregister_thread. Also don't flush signals in md_thread, as the called thread will always do that. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: write-intent bitmap support for raid6NeilBrown2005-09-092-11/+124
| | | | | | | | This is a direct port of the raid5 patch. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: add write-intent-bitmap support to raid5NeilBrown2005-09-092-12/+124
| | | | | | | | | | | | | | | | | | | | | | | Most awkward part of this is delaying write requests until bitmap updates have been flushed. To achieve this, we have a sequence number (seq_flush) which is incremented each time the raid5 is unplugged. If the raid thread notices that this has changed, it flushes bitmap changes, and assigned the value of seq_flush to seq_write. When a write request arrives, it is given the number from seq_write, and that write request may not complete until seq_flush is larger than the saved seq number. We have a new queue for storing stripes which are waiting for a bitmap flush and an extra flag for stripes to record if the write was 'degraded' and so should not clear the a bit in the bitmap. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: limit size of sb read/written to appropriate amountNeilBrown2005-09-091-5/+15
| | | | | | | | | | | | | version-1 superblocks are not (normally) 4K long, and can be of variable size. Writing the full 4K can cause corruption (but only in non-default configurations). With this patch the super-block-flavour can choose a size to read, and set a size to write based on what it finds. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix bitmap/read_sb_page so that it handles errors properly.NeilBrown2005-09-091-9/+10
| | | | | | | | | | | | read_sb_page() assumed that if sync_page_io fails, the device would be marked faultly. However it isn't. So in the face of error, read_sb_page would loop forever. Redo the logic so that this cannot happen. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: allow md to load a superblock with feature-bit '1' setNeilBrown2005-09-091-3/+3
| | | | | | | | | | As this is used to flag an internal bitmap. Also, introduce symbolic names for feature bits. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: allow hot-adding devices to arrays with non-persistant superblocks.NeilBrown2005-09-091-2/+5
| | | | | | | | | | | | | | | It is possibly (and occasionally useful) to have a raid1 without persistent superblocks. The code in add_new_disk for adding a device to such an array always tries to read a superblock. This will obviously fail. So do the appropriate test and call md_import_device with appropriate args. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: do not set mddev->bitmap until bitmap is fully initialisedNeilBrown2005-09-091-9/+24
| | | | | | | | | | | | When hot-adding a bitmap, bitmap_daemon_work could get called while the bitmap is being created, so don't set mddev->bitmap until the bitmap is ready. This requires freeing the bitmap inside bitmap_create if creation failed part-way through. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: make sure bitmap_daemon_work actually does work.NeilBrown2005-09-091-0/+1
| | | | | | | | | The 'lastrun' time wasn't being initialised, so it could be half a jiffie-cycle before it seemed to be time to do work again. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: raid1_quiesce is back to front, fix it.NeilBrown2005-09-091-2/+2
| | | | | | | | | | | A state of 0 mean 'not quiesced' A state of 1 means 'is quiesced' The original code got this wrong. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: support md/linear array with components greater than 2 terabytes.NeilBrown2005-09-091-29/+66
| | | | | | | | | | | | | | | linear currently uses division by the size of the smallest componenet device to find which device a request goes to. If that smallest device is larger than 2 terabytes, then the division will not work on some systems. So we introduce a pre-shift, and take care not to make the hash table too large, much like the code in raid0. Also get rid of conf->nr_zones, which is not needed. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: add write-behind support for md/raid1NeilBrown2005-09-092-11/+139
| | | | | | | | | | | | | | | | | | | If a device is flagged 'WriteMostly' and the array has a bitmap, and the bitmap superblock indicates that write_behind is allowed, then write_behind is enabled for WriteMostly devices. Write requests will be acknowledges as complete to the caller (via b_end_io) when all non-WriteMostly devices have completed the write, but will not be cleared from the bitmap until all devices complete. This requires memory allocation to make a local copy of the data being written. If there is insufficient memory, then we fall-back on normal write semantics. Signed-Off-By: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: support write-mostly device in raid1NeilBrown2005-09-092-24/+70
| | | | | | | | | This allows a device in a raid1 to be marked as "write mostly". Read requests will only be sent if there is no other option. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: all hot-add and hot-remove of md intent logging bitmapsNeilBrown2005-09-092-17/+117
| | | | | | | | | | | | | | Both file-bitmaps and superblock bitmaps are supported. If you add a bitmap file on the array device, you lose. This introduces a 'default_bitmap_offset' field in mddev, as the ioctl used for adding a superblock bitmap doesn't have room for giving an offset. Later, this value will be setable via sysfs. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: improve handling of bitmap initialisation.NeilBrown2005-09-091-7/+21
| | | | | | | | | | When we find a 'stale' bitmap, possibly because it is new, we should just assume every bit needs to be set, but rather base the setting of bits on the current state of the array (degraded and recovery_cp). Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: don't allow new md/bitmap file to be set if one already existsNeilBrown2005-09-091-1/+1
| | | | | | | | ... otherwise we loose a reference and can never free the file. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm: fix rh_dec()/rh_inc() race in dm-raid1.cJun'ichi Nomura2005-09-091-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix another bug in dm-raid1.c that the dirty region may stay in or be moved to clean list and freed while in use. It happens as follows: CPU0 CPU1 ------------------------------------------------------------------------------ rh_dec() if (atomic_dec_and_test(pending)) <the region is still marked dirty> rh_inc() if the region is clean mark the region dirty and remove from clean list mark the region clean and move to clean list atomic_inc(pending) At this stage, the region is in clean list and will be mistakenly reclaimed by rh_update_states() later. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fail IO request to md that require a barrier.NeilBrown2005-09-097-0/+34
| | | | | | | | | md does not yet support BIO_RW_BARRIER, so be honest about it and fail (-EOPNOTSUPP) any such requests. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix minor error in raid10 read-balancing calculation.NeilBrown2005-09-091-1/+2
| | | | | | | | | | | | | 'this_sector' is a virtual (array) address while 'head_position' is a physical (device) address, so substraction doesn't make any sense. devs[slot].addr should be used instead of this_sector. However, this patch doesn't make much practical different to the read balancing due to the effects of later code. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] trivial __user annotations (md)viro@ZenIV.linux.org.uk2005-09-091-2/+2
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kill bio->bi_setPeter Osterlund2005-09-072-0/+12
| | | | | | | | | | | | | | | | Jens: ->bi_set is totally unnecessary bloat of struct bio. Just define a proper destructor for the bio and it already knows what bio_set it belongs too. Peter: Fixed the bugs. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [CRYPTO]: Use CRYPTO_TFM_REQ_MAY_SLEEP where appropriateHerbert Xu2005-09-011-3/+4
| | | | | | | | | This patch goes through the current users of the crypto layer and sets CRYPTO_TFM_REQ_MAY_SLEEP at crypto_alloc_tfm() where all crypto operations are performed in process context. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] md: clear the 'recovery' flags when starting an md array.NeilBrown2005-08-261-0/+1
| | | | | | | | | It's possible for this to still have flags in it and a previous instance has been stopped, and that confused the new array using the same mddev. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: create a MODULE_ALIAS for md corresponding to its block major ↵NeilBrown2005-08-261-0/+1
| | | | | | | | | | number. I just discovered this is needed for module auto-loading. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: make sure resync gets started when array starts.NeilBrown2005-08-231-4/+3
| | | | | | | | | | | | | We weren't actually waking up the md thread after setting MD_RECOVERY_NEEDED when assembling an array, so it is possible to lose a race and not actually start resync. So add a call to md_wakeup_thread, and while we are at it, remove all the "if (mddev->thread)" guards as md_wake_thread does its own checking. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: make sure mddev->bitmap_offset gets cleared between array ↵NeilBrown2005-08-181-0/+3
| | | | | | | | | | | | | | | | instantiations. ... otherwise we might try to load a bitmap from an array which hasn't one. The bug is that if you create an array with an internal bitmap, shut it down, and then create an array with the same md device, the md drive will assume it should have a bitmap too. As the array can be created with a different md device, it is mostly an inconvenience. I'm pretty sure there is no risk of data corruption. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm-raid locking fixAlasdair G Kergon2005-08-041-1/+1
| | | | | | | | | This code was never designed to handle more than one instance of do_work() running at once. Signed-Off-By: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: make sure md bitmap updates are flushed when array is stopped.NeilBrown2005-08-042-0/+25
| | | | | | | | | | | | The recent change to never ignore the bitmap, revealed that the bitmap isn't begin flushed properly when an array is stopped. We call bitmap_daemon_work three times as there is a three-stage pipeline for flushing updates to the bitmap file. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud