summaryrefslogtreecommitdiffstats
path: root/drivers/md/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* dm: move request-based code out to dm-rq.[hc]Mike Snitzer2016-06-101-1/+2
| | | | | | | | | | | | | | Add some seperation between bio-based and request-based DM core code. 'struct mapped_device' and other DM core only structures and functions have been moved to dm-core.h and all relevant DM core .c files have been updated to include dm-core.h rather than dm.h DM targets should _never_ include dm-core.h! [block core merge conflict resolution from Stephen Rothwell] Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
* dm cache: make the 'mq' policy an alias for 'smq'Joe Thornber2016-03-101-2/+0
| | | | | | | | | | | | smq seems to be performing better than the old mq policy in all situations, as well as using a quarter of the memory. Make 'mq' an alias for 'smq' when choosing a cache policy. The tunables that were present for the old mq are faked, and have no effect. mq should be considered deprecated now. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm verity: add support for forward error correctionSami Tolvanen2015-12-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Add support for correcting corrupted blocks using Reed-Solomon. This code uses RS(255, N) interleaved across data and hash blocks. Each error-correcting block covers N bytes evenly distributed across the combined total data, so that each byte is a maximum distance away from the others. This makes it possible to recover from several consecutive corrupted blocks with relatively small space overhead. In addition, using verity hashes to locate erasures nearly doubles the effectiveness of error correction. Being able to detect corrupted blocks also improves performance, because only corrupted blocks need to corrected. For a 2 GiB partition, RS(255, 253) (two parity bytes for each 253-byte block) can correct up to 16 MiB of consecutive corrupted blocks if erasures can be located, and 8 MiB if they cannot, with 16 MiB space overhead. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm verity: move dm-verity.c to dm-verity-target.cSami Tolvanen2015-12-101-0/+1
| | | | | | | | Prepare for extending dm-verity with an optional object. Follows the naming convention used by other DM targets (e.g. dm-cache and dm-era). Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* raid5: add basic stripe logShaohua Li2015-10-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces a simple log for raid5. Data/parity writing to raid array first writes to the log, then write to raid array disks. If crash happens, we can recovery data from the log. This can speed up raid resync and fix write hole issue. The log structure is pretty simple. Data/meta data is stored in block unit, which is 4k generally. It has only one type of meta data block. The meta data block can track 3 types of data, stripe data, stripe parity and flush block. MD superblock will point to the last valid meta data block. Each meta data block has checksum/seq number, so recovery can scan the log correctly. We store a checksum of stripe data/parity to the metadata block, so meta data and stripe data/parity can be written to log disk together. otherwise, meta data write must wait till stripe data/parity is finished. For stripe data, meta data block will record stripe data sector and size. Currently the size is always 4k. This meta data record can be made simpler if we just fix write hole (eg, we can record data of a stripe's different disks together), but this format can be extended to support caching in the future, which must record data address/size. For stripe parity, meta data block will record stripe sector. It's size should be 4k (for raid5) or 8k (for raid6). We always store p parity first. This format should work for caching too. flush block indicates a stripe is in raid array disks. Fixing write hole doesn't need this type of meta data, it's for caching extension. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
* dm cache: add stochastic-multi-queue (smq) policyJoe Thornber2015-06-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The stochastic-multi-queue (smq) policy addresses some of the problems with the current multiqueue (mq) policy. Memory usage ------------ The mq policy uses a lot of memory; 88 bytes per cache block on a 64 bit machine. SMQ uses 28bit indexes to implement it's data structures rather than pointers. It avoids storing an explicit hit count for each block. It has a 'hotspot' queue rather than a pre cache which uses a quarter of the entries (each hotspot block covers a larger area than a single cache block). All these mean smq uses ~25bytes per cache block. Still a lot of memory, but a substantial improvement nontheless. Level balancing --------------- MQ places entries in different levels of the multiqueue structures based on their hit count (~ln(hit count)). This means the bottom levels generally have the most entries, and the top ones have very few. Having unbalanced levels like this reduces the efficacy of the multiqueue. SMQ does not maintain a hit count, instead it swaps hit entries with the least recently used entry from the level above. The over all ordering being a side effect of this stochastic process. With this scheme we can decide how many entries occupy each multiqueue level, resulting in better promotion/demotion decisions. Adaptability ------------ The MQ policy maintains a hit count for each cache block. For a different block to get promoted to the cache it's hit count has to exceed the lowest currently in the cache. This means it can take a long time for the cache to adapt between varying IO patterns. Periodically degrading the hit counts could help with this, but I haven't found a nice general solution. SMQ doesn't maintain hit counts, so a lot of this problem just goes away. In addition it tracks performance of the hotspot queue, which is used to decide which blocks to promote. If the hotspot queue is performing badly then it starts moving entries more quickly between levels. This lets it adapt to new IO patterns very quickly. Performance ----------- In my tests SMQ shows substantially better performance than MQ. Once this matures a bit more I'm sure it'll become the default policy. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* Merge tag 'md/4.1' of git://neil.brown.name/mdLinus Torvalds2015-04-241-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull md updates from Neil Brown: "More updates that usual this time. A few have performance impacts which hould mostly be positive, but RAID5 (in particular) can be very work-load ensitive... We'll have to wait and see. Highlights: - "experimental" code for managing md/raid1 across a cluster using DLM. Code is not ready for general use and triggers a WARNING if used. However it is looking good and mostly done and having in mainline will help co-ordinate development. - RAID5/6 can now batch multiple (4K wide) stripe_heads so as to handle a full (chunk wide) stripe as a single unit. - RAID6 can now perform read-modify-write cycles which should help performance on larger arrays: 6 or more devices. - RAID5/6 stripe cache now grows and shrinks dynamically. The value set is used as a minimum. - Resync is now allowed to go a little faster than the 'mininum' when there is competing IO. How much faster depends on the speed of the devices, so the effective minimum should scale with device speed to some extent" * tag 'md/4.1' of git://neil.brown.name/md: (58 commits) md/raid5: don't do chunk aligned read on degraded array. md/raid5: allow the stripe_cache to grow and shrink. md/raid5: change ->inactive_blocked to a bit-flag. md/raid5: move max_nr_stripes management into grow_one_stripe and drop_one_stripe md/raid5: pass gfp_t arg to grow_one_stripe() md/raid5: introduce configuration option rmw_level md/raid5: activate raid6 rmw feature md/raid6 algorithms: xor_syndrome() for SSE2 md/raid6 algorithms: xor_syndrome() for generic int md/raid6 algorithms: improve test program md/raid6 algorithms: delta syndrome functions raid5: handle expansion/resync case with stripe batching raid5: handle io error of batch list RAID5: batch adjacent full stripe write raid5: track overwrite disk count raid5: add a new flag to track if a stripe can be batched raid5: use flex_array for scribble data md raid0: access mddev->queue (request queue member) conditionally because it is not set when accessed from dm-raid md: allow resync to go faster when there is competing IO. md: remove 'go_faster' option from ->sync_request() ...
| * Create a separate module for clustering supportGoldwyn Rodrigues2015-02-231-0/+1
| | | | | | | | | | | | Tagged as EXPERIMENTAL for now. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
* | dm: add log writes targetJosef Bacik2015-04-151-0/+1
|/ | | | | | | | | | | | | Introduce a new target that is meant for file system developers to test file system integrity at particular points in the life of a file system. We capture all write requests and associated data and log them to a separate device for later replay. There is a userspace utility to do this replay. The idea behind this is to give file system developers a tool to verify that the file system is always consistent. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Zach Brown <zab@zabbo.net> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: add era targetJoe Thornber2014-03-271-0/+2
| | | | | | | | | | | | | | | | | dm-era is a target that behaves similar to the linear target. In addition it keeps track of which blocks were written within a user defined period of time called an 'era'. Each era target instance maintains the current era as a monotonically increasing 32-bit counter. Use cases include tracking changed blocks for backup software, and partially invalidating the contents of a cache to restore cache coherency after rolling back a vendor snapshot. dm-era is primarily expected to be paired with the dm-cache target. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm sysfs: fix a module unload raceMikulas Patocka2014-01-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | This reverts commit be35f48610 ("dm: wait until embedded kobject is released before destroying a device") and provides an improved fix. The kobject release code that calls the completion must be placed in a non-module file, otherwise there is a module unload race (if the process calling dm_kobject_release is preempted and the DM module unloaded after the completion is triggered, but before dm_kobject_release returns). To fix this race, this patch moves the completion code to dm-builtin.c which is always compiled directly into the kernel if BLK_DEV_DM is selected. The patch introduces a new dm_kobject_holder structure, its purpose is to keep the completion and kobject in one place, so that it can be accessed from non-module code without the need to export the layout of struct mapped_device to that code. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
* dm: add statistics supportMikulas Patocka2013-09-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support the collection of I/O statistics on user-defined regions of a DM device. If no regions are defined no statistics are collected so there isn't any performance impact. Only bio-based DM devices are currently supported. Each user-defined region specifies a starting sector, length and step. Individual statistics will be collected for each step-sized area within the range specified. The I/O statistics counters for each step-sized area of a region are in the same format as /sys/block/*/stat or /proc/diskstats but extra counters (12 and 13) are provided: total time spent reading and writing in milliseconds. All these counters may be accessed by sending the @stats_print message to the appropriate DM device via dmsetup. The creation of DM statistics will allocate memory via kmalloc or fallback to using vmalloc space. At most, 1/4 of the overall system memory may be allocated by DM statistics. The admin can see how much memory is used by reading /sys/module/dm_mod/parameters/stats_current_allocated_bytes See Documentation/device-mapper/statistics.txt for more details. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: add switch targetJim Ramsay2013-07-101-0/+1
| | | | | | | | | | | | | | | | | dm-switch is a new target that maps IO to underlying block devices efficiently when there is a large number of fixed-sized address regions but there is no simple pattern to allow for a compact mapping representation such as dm-stripe. Though we have developed this target for a specific storage device, Dell EqualLogic, we have made an effort to keep it as general purpose as possible in the hope that others may benefit. Originally developed by Jim Ramsay. Simplified by Mikulas Patocka. Signed-off-by: Jim Ramsay <jim_ramsay@dell.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* bcache: A block layer cacheKent Overstreet2013-03-231-0/+1
| | | | | | | | | Does writethrough and writeback caching, handles unclean shutdown, and has a bunch of other nifty features motivated by real world usage. See the wiki at http://bcache.evilpiepirate.org for more. Signed-off-by: Kent Overstreet <koverstreet@google.com>
* dm cache: add cleaner policyHeinz Mauelshagen2013-03-011-0/+2
| | | | | | | | | | A simple cache policy that writes back all data to the origin. This is used to decommission a dm cache by emptying it. Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm cache: add mq policyJoe Thornber2013-03-011-0/+2
| | | | | | | | | | A cache policy that uses a multiqueue ordered by recent hit count to select which blocks should be promoted and demoted. This is meant to be a general purpose policy. It prioritises reads over writes. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: add cache targetJoe Thornber2013-03-011-0/+2
| | | | | | | | | | | | | | | | Add a target that allows a fast device such as an SSD to be used as a cache for a slower device such as a disk. A plug-in architecture was chosen so that the decisions about which data to migrate and when are delegated to interchangeable tunable policy modules. The first general purpose module we have developed, called "mq" (multiqueue), follows in the next patch. Other modules are under development. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm thin: move bio_prison code to separate moduleMike Snitzer2012-10-121-0/+1
| | | | | | | | | The bio prison code will be useful to other future DM targets so move it to a separate module. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: add verity targetMikulas Patocka2012-03-281-0/+1
| | | | | | | | | | | | | | | | | | | | This device-mapper target creates a read-only device that transparently validates the data on one underlying device against a pre-generated tree of cryptographic checksums stored on a second device. Two checksum device formats are supported: version 0 which is already shipping in Chromium OS and version 1 which incorporates some improvements. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Elly Jones <ellyjones@chromium.org> Cc: Milan Broz <mbroz@redhat.com> Cc: Olof Johansson <olofj@chromium.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: add thin provisioning targetJoe Thornber2011-10-311-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Initial EXPERIMENTAL implementation of device-mapper thin provisioning with snapshot support. The 'thin' target is used to create instances of the virtual devices that are hosted in the 'thin-pool' target. The thin-pool target provides data sharing among devices. This sharing is made possible using the persistent-data library in the previous patch. The main highlight of this implementation, compared to the previous implementation of snapshots, is that it allows many virtual devices to be stored on the same data volume, simplifying administration and allowing sharing of data between volumes (thus reducing disk usage). Another big feature is support for arbitrary depth of recursive snapshots (snapshots of snapshots of snapshots ...). The previous implementation of snapshots did this by chaining together lookup tables, and so performance was O(depth). This new implementation uses a single data structure so we don't get this degradation with depth. For further information and examples of how to use this, please read Documentation/device-mapper/thin-provisioning.txt Signed-off-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: add bufioMikulas Patocka2011-10-311-0/+1
| | | | | | | | | | | | | | | | | | The dm-bufio interface allows you to do cached I/O on devices, holding recently-read blocks in memory and performing delayed writes. We don't use buffer cache or page cache already present in the kernel, because: * we need to handle block sizes larger than a page * we can't allocate memory to perform reads or we'd have deadlocks Currently, when a cache is required, we limit its size to a fraction of available memory. Usage can be viewed and changed in /sys/module/dm_bufio/parameters/ . The first user is thin provisioning, but more dm users are planned. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: add flakey targetJosef Bacik2011-03-241-0/+1
| | | | | | | | | | | | This target is the same as the linear target except that it returns I/O errors periodically. It's been found useful in simulating failing devices for testing purposes. I needed a dm target to do some failure testing on btrfs's raid code, and Mike pointed me at this. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: raid456 basic supportNeilBrown2011-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is the skeleton for the DM target that will be the bridge from DM to MD (initially RAID456 and later RAID1). It provides a way to use device-mapper interfaces to the MD RAID456 drivers. As with all device-mapper targets, the nominal public interfaces are the constructor (CTR) tables and the status outputs (both STATUSTYPE_INFO and STATUSTYPE_TABLE). The CTR table looks like the following: 1: <s> <l> raid \ 2: <raid_type> <#raid_params> <raid_params> \ 3: <#raid_devs> <meta_dev1> <dev1> .. <meta_devN> <devN> Line 1 contains the standard first three arguments to any device-mapper target - the start, length, and target type fields. The target type in this case is "raid". Line 2 contains the arguments that define the particular raid type/personality/level, the required arguments for that raid type, and any optional arguments. Possible raid types include: raid4, raid5_la, raid5_ls, raid5_rs, raid6_zr, raid6_nr, and raid6_nc. (again, raid1 is planned for the future.) The list of required and optional parameters is the same for all the current raid types. The required parameters are positional, while the optional parameters are given as key/value pairs. The possible parameters are as follows: <chunk_size> Chunk size in sectors. [[no]sync] Force/Prevent RAID initialization [rebuild <idx>] Rebuild the drive indicated by the index [daemon_sleep <ms>] Time between bitmap daemon work to clear bits [min_recovery_rate <kB/sec/disk>] Throttle RAID initialization [max_recovery_rate <kB/sec/disk>] Throttle RAID initialization [max_write_behind <value>] See '-write-behind=' (man mdadm) [stripe_cache <sectors>] Stripe cache size for higher RAIDs Line 3 contains the list of devices that compose the array in metadata/data device pairs. If the metadata is stored separately, a '-' is given for the metadata device position. If a drive has failed or is missing at creation time, a '-' can be given for both the metadata and data drives for a given position. Examples: # RAID4 - 4 data drives, 1 parity # No metadata devices specified to hold superblock/bitmap info # Chunk size of 1MiB # (Lines separated for easy reading) 0 1960893648 raid \ raid4 1 2048 \ 5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81 # RAID4 - 4 data drives, 1 parity (no metadata devices) # Chunk size of 1MiB, force RAID initialization, # min recovery rate at 20 kiB/sec/disk 0 1960893648 raid \ raid4 4 2048 min_recovery_rate 20 sync\ 5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81 Performing a 'dmsetup table' should display the CTR table used to construct the mapping (with possible reordering of optional parameters). Performing a 'dmsetup status' will yield information on the state and health of the array. The output is as follows: 1: <s> <l> raid \ 2: <raid_type> <#devices> <1 health char for each dev> <resync_ratio> Line 1 is standard DM output. Line 2 is best shown by example: 0 1960893648 raid raid4 5 AAAAA 2/490221568 Here we can see the RAID type is raid4, there are 5 devices - all of which are 'A'live, and the array is 2/490221568 complete with recovery. Cc: linux-raid@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* Merge branch 'async' of macbook:git/btrfs-unstableDavid Woodhouse2010-08-091-77/+0
|\ | | | | | | | | | | Conflicts: drivers/md/Makefile lib/raid6/unroll.pl
| * md: Factor out RAID6 algorithms into lib/David Woodhouse2009-10-291-76/+0
| | | | | | | | | | | | We'll want to use these in btrfs too. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | md: drivers/md/unroll.pl replaced with awk analogVladimir Dronnikov2009-10-161-11/+11
|/ | | | | | | | drivers/md/unroll.pl replaced by awk script to drop build-time dependency on perl Signed-off-by: Vladimir Dronnikov <dronnikov@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* dm raid1: add userspace logJonthan Brassow2009-06-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains a device-mapper mirror log module that forwards requests to userspace for processing. The structures used for communication between kernel and userspace are located in include/linux/dm-log-userspace.h. Due to the frequency, diversity, and 2-way communication nature of the exchanges between kernel and userspace, 'connector' was chosen as the interface for communication. The first log implementations written in userspace - "clustered-disk" and "clustered-core" - support clustered shared storage. A userspace daemon (in the LVM2 source code repository) uses openAIS/corosync to process requests in an ordered fashion with the rest of the nodes in the cluster so as to prevent log state corruption. Other implementations with no association to LVM or openAIS/corosync, are certainly possible. (Imagine if two machines are writing to the same region of a mirror. They would both mark the region dirty, but you need a cluster-aware entity that can handle properly marking the region clean when they are done. Otherwise, you might clear the region when the first machine is done, not the second.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm mpath: add service time load balancerKiyoshi Ueda2009-06-221-0/+1
| | | | | | | | | | | | | | | | This patch adds a service time oriented dynamic load balancer, dm-service-time, which selects the path with the shortest estimated service time for the incoming I/O. The service time is estimated by dividing the in-flight I/O size by a performance value of each path. The performance value can be given as a table argument at the table loading time. If no performance value is given, all paths are considered equal. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm mpath: add queue length load balancerKiyoshi Ueda2009-06-221-0/+1
| | | | | | | | | | | | | This patch adds a dynamic load balancer, dm-queue-length, which balances the number of in-flight I/Os across the paths. The code is based on the patch posted by Stefan Bader: https://www.redhat.com/archives/dm-devel/2005-October/msg00050.html Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* md/raid6: move raid6 data processing to raid6_pq.koDan Williams2009-03-311-1/+3
| | | | | | | | | | | | | | | | | Move the raid6 data processing routines into a standalone module (raid6_pq) to prepare them to be called from async_tx wrappers and other non-md drivers/modules. This precludes a circular dependency of raid456 needing the async modules for data processing while those modules in turn depend on raid456 for the base level synchronous raid6 routines. To support this move: 1/ The exportable definitions in raid6.h move to include/linux/raid/pq.h 2/ The raid6_call, recovery calls, and table symbols are exported 3/ Extra #ifdef __KERNEL__ statements to enable the userspace raid6test to compile Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
* cleanup drivers/md/MakefileChristoph Hellwig2009-03-311-7/+7
| | | | | | | | | | Use the -y variables instead of the old -objs so we can easily add conditional objects to the modules. Also always use += to add subobjects to avoid problems when placing additional objects in some place in the file. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
* dm snapshot: split out exception store implementationsAlasdair G Kergon2009-01-061-1/+2
| | | | | | | | Move the existing snapshot exception store implementations out into separate files. Later patches will place these behind a new interface in preparation for alternative implementations. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: add name and uuid to sysfsMilan Broz2009-01-061-1/+1
| | | | | | | | | | | | | | | | | | | | | Implement simple read-only sysfs entry for device-mapper block device. This patch adds a simple sysfs directory named "dm" under block device properties and implements - name attribute (string containing mapped device name) - uuid attribute (string containing UUID, or empty string if not set) The kobject is embedded in mapped_device struct, so no additional memory allocation is needed for initializing sysfs entry. During the processing of sysfs attribute we need to lock mapped device which is done by a new function dm_get_from_kobj, which returns the md associated with kobject and increases the usage count. Each 'show attribute' function is responsible for its own locking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm raid1: separate region_hash interface part1Heinz Mauelshagen2008-10-211-1/+1
| | | | | | | | Separate the region hash code from raid1 so it can be shared by forthcoming targets. Use BUG_ON() for failed async dm_io() calls. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* [SCSI] scsi_dh: Remove hardware handler infrastructure from dmChandra Seetharaman2008-06-051-1/+1
| | | | | | | | | This patch just removes infrastructure that provided support for hardware handlers in the dm layer as it is not needed anymore. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: Remove hardware handlers from dmChandra Seetharaman2008-06-051-5/+0
| | | | | | | | | | | This patch removes the 3 hardware handlers that currently exist under dm as the functionality is moved to SCSI layer in the earlier patches. [jejb: removed more makefile hunks and rejection fixes] Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* dm: move include filesAlasdair G Kergon2008-04-251-1/+1
| | | | | | Publish the dm-io, dm-log and dm-kcopyd headers in include/linux. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm log: move dirty region log code into separate moduleHeinz Mauelshagen2008-04-251-2/+2
| | | | | | | | Move the dirty region log code into a separate module so other targets can share the code. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: add uevent to coreMike Anderson2007-10-201-0/+4
| | | | | | | This patch adds a uevent skeleton to device-mapper. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm mpath: add hp handlerDave Wysochanski2007-10-201-0/+2
| | | | | | | | | | This patch adds the most basic dm-multipath hardware support for the HP active/passive arrays. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* Merge branch 'ioat-md-accel-for-linus' of ↵Linus Torvalds2007-07-131-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://lost.foo-projects.org/~dwillia2/git/iop * 'ioat-md-accel-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop: (28 commits) ioatdma: add the unisys "i/oat" pci vendor/device id ARM: Add drivers/dma to arch/arm/Kconfig iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driver iop13xx: surface the iop13xx adma units to the iop-adma driver dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines md: remove raid5 compute_block and compute_parity5 md: handle_stripe5 - request io processing in raid5_run_ops md: handle_stripe5 - add request/completion logic for async expand ops md: handle_stripe5 - add request/completion logic for async read ops md: handle_stripe5 - add request/completion logic for async check ops md: handle_stripe5 - add request/completion logic for async compute ops md: handle_stripe5 - add request/completion logic for async write ops md: common infrastructure for running operations with raid5_run_ops md: raid5_run_ops - run stripe operations outside sh->lock raid5: replace custom debug PRINTKs with standard pr_debug raid5: refactor handle_stripe5 and handle_stripe6 (v3) async_tx: add the async_tx api xor: make 'xor_blocks' a library routine for use with async_tx dmaengine: make clients responsible for managing channels dmaengine: refactor dmaengine around dma_async_tx_descriptor ...
| * xor: make 'xor_blocks' a library routine for use with async_txDan Williams2007-07-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The async_tx api tries to use a dma engine for an operation, but will fall back to an optimized software routine otherwise. Xor support is implemented using the raid5 xor routines. For organizational purposes this routine is moved to a common area. The following fixes are also made: * rename xor_block => xor_blocks, suggested by Adrian Bunk * ensure that xor.o initializes before md.o in the built-in case * checkpatch.pl fixes * mark calibrate_xor_blocks __init, Adrian Bunk Cc: Adrian Bunk <bunk@stusta.de> Cc: NeilBrown <neilb@suse.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* | dm mpath: rdacChandra Seetharaman2007-07-121-0/+2
|/ | | | | | | | | | | | | | | | | This patch supports LSI/Engenio devices in RDAC mode. Like dm-emc it requires userspace support. In your multipath.conf file you must have: path_checker rdac hardware_handler "1 rdac" prio_callout "/sbin/mpath_prio_tpc /dev/%n" And you also then must have a updated multipath tools release which has rdac support. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dm: delay targetHeinz Mauelshagen2007-05-091-0/+1
| | | | | | | | | | | | New device-mapper target that can delay I/O (for testing). Reads can be separated from writes, redirected to different underlying devices and delayed by differing amounts of time. Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] md: merge raid5 and raid6 codeNeilBrown2006-06-261-3/+2
| | | | | | | | | | | | | | There is a lot of commonality between raid5.c and raid6main.c. This patches merges both into one module called raid456. This saves a lot of code, and paves the way for online raid5->raid6 migrations. There is still duplication, e.g. between handle_stripe5 and handle_stripe6. This will probably be cleaned up later. Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: optimised resync using Bitmap based intent loggingNeilBrown2005-06-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch, the intent to write to some block in the array can be logged to a bitmap file. Each bit represents some number of sectors and is set before any update happens, and only cleared when all writes relating to all sectors are complete. After an unclean shutdown, information in this bitmap can be used to optimise resync - only sectors which could be out-of-sync need to be updated. Also if a drive is removed and then added back into an array, the recovery can make use of the bitmap to optimise reconstruction. This is not implemented in this patch. Currently the bitmap is stored in a file which must (obviously) be stored on a separate device. The patch only provided infrastructure. It does not update any personalities to bitmap intent logging. Md arrays can still be used with no bitmap file. This patch has minimal impact on such arrays. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+107
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud