summaryrefslogtreecommitdiffstats
path: root/drivers/leds
Commit message (Collapse)AuthorAgeFilesLines
* drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmaxAxel Lin2012-02-081-2/+2
| | | | | | | | | | | | | | | | | | In current code, pltfm->als_vmin is set to LM3530_ALS_WINDOW_mV and pltfm->als_vmax is 0. This does not make sense. I think what we want here is setting pltfm->als_vmax to LM3530_ALS_WINDOW_mV. Both als_vmin and als_vmax local variables will be set to pltfm->als_vmin and pltfm->als_vmax by a few lines latter. Thus also remove a redundant assignment for als_vmin and als_vmax in this patch. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: add led driver for Bachmann's ot200Sebastian Andrzej Siewior2012-01-233-0/+179
| | | | | | | | | | | | | | | | | Add support for leds on Bachmann's ot200 visualisation device. The device has three leds on the back panel (led_err, led_init and led_run) and can handle up to seven leds on the front panel. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. It incorporates feedback from Lars-Peter Clausen [akpm@linux-foundation.org: add dependency on HAS_IOMEM] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'for-linus' of git://github.com/rustyrussell/linuxLinus Torvalds2012-01-142-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1 * tag 'for-linus' of git://github.com/rustyrussell/linux: module_param: check that bool parameters really are bool. intelfbdrv.c: bailearly is an int module_param paride/pcd: fix bool verbose module parameter. module_param: make bool parameters really bool (drivers & misc) module_param: make bool parameters really bool (arch) module_param: make bool parameters really bool (core code) kernel/async: remove redundant declaration. printk: fix unnecessary module_param_name. lirc_parallel: fix module parameter description. module_param: avoid bool abuse, add bint for special cases. module_param: check type correctness for module_param_array modpost: use linker section to generate table. modpost: use a table rather than a giant if/else statement. modules: sysfs - export: taint, coresize, initsize kernel/params: replace DEBUGP with pr_debug module: replace DEBUGP with pr_debug module: struct module_ref should contains long fields module: Fix performance regression on modules with large symbol tables module: Add comments describing how the "strmap" logic works Fix up conflicts in scripts/mod/file2alias.c due to the new linker- generated table approach to adding __mod_*_device_table entries. The ARM sa11x0 mcp bus needed to be converted to that too.
| * module_param: make bool parameters really bool (drivers & misc)Rusty Russell2012-01-132-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | Merge branch 'for-next' of ↵Linus Torvalds2012-01-133-0/+380
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
| * leds: Add suuport for MAX8997-LED driverDonggeun Kim2012-01-093-0/+380
| | | | | | | | | | | | | | | | | | This patch enables LED controller in MAX8997 PMIC. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | leds: convert wm8350 driver to devm_kzalloc()Mark Brown2012-01-101-5/+2
| | | | | | | | | | | | | | | | | | Saves a small amount of code and systematically eliminates leaks. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | leds: convert wm831x status driver to devm_kzalloc()Mark Brown2012-01-101-3/+2
| | | | | | | | | | | | | | | | | | Saves a small amount of code and systematically eliminates leaks. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/leds/leds-mc13783.c: fix off-by-one for checking num_ledsAxel Lin2012-01-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | The LED id begins from 0. Thus the maximum number of leds should be MC13783_LED_MAX + 1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Philippe Retornaz <philippe.retornaz@epfl.ch> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | leds: add driver for TCA6507 LED controllerNeilBrown2012-01-103-0/+788
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TI's TCA6507 is the LED driver in the GTA04 Openmoko motherboard. The driver provides full support for brightness levels and hardware blinking. This driver can drive each of 7 outputs as an LED or a GPIO output, and provides hardware-assist blinking. [akpm@linux-foundation.org: fix __mod_i2c_device_table alias] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NeilBrown <neilb@suse.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/leds/leds-netxbig.c: use gpio_request_one()Axel Lin2012-01-101-18/+6
| | | | | | | | | | | | | | | | | | | | | | Use gpio_request_one() instead of multiple gpiolib calls. This also simplifies error handling a bit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Simon Guinot <sguinot@lacie.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/leds/leds-bd2802.c: use gpio_request_one()Axel Lin2012-01-101-2/+1
| | | | | | | | | | | | | | | | | | | | Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Kim Kyuwon <q1.kim@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/leds/leds-lp5523.c: remove unneeded forward declarationAxel Lin2012-01-101-2/+0
| | | | | | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | leds: convert leds-dac124s085 to module_spi_driverAxel Lin2012-01-101-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Factor out some boilerplate code for spi driver registration into module_spi_driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Haojian Zhuang <hzhuang1@marvell.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Michael Hennerich <hennerich@blackfin.uclinux.org> Cc: Mike Rapoport <mike@compulab.co.il> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | leds: convert led i2c drivers to module_i2c_driverAxel Lin2012-01-107-98/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Factor out some boilerplate code for i2c driver registration into module_i2c_driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Haojian Zhuang <hzhuang1@marvell.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Michael Hennerich <hennerich@blackfin.uclinux.org> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | leds: convert led platform drivers to module_platform_driverAxel Lin2012-01-1021-265/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Factor out some boilerplate code for platform driver registration into module_platform_driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Haojian Zhuang <hzhuang1@marvell.com> [led-88pm860x.c] Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Michael Hennerich <hennerich@blackfin.uclinux.org> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2012-01-081-1/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
| * | leds: Kconfig: Fix typo 'D2NET_V2'Paul Bolle2011-11-241-1/+2
| | | | | | | | | | | | | | | | | | Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman2012-01-062-2/+0
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | driver-core: remove sysdev.h usage.Kay Sievers2011-12-212-2/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sysdev.h file should not be needed by any in-kernel code, so remove the .h file from these random files that seem to still want to include it. The sysdev code will be going away soon, so this include needs to be removed no matter what. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "Venkatesh Pallipadi Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
* | Revert "leds: save the delay values after a successful call to blink_set()"Johan Hovold2011-11-151-4/+1
|/ | | | | | | | | | | | | | | | Revert commit 6123b0e274503a0d3588e84fbe07c9aa01bfaf5d. The problem this patch intends to solve has alreadqy been fixed by commit 7a5caabd090b ("drivers/leds/ledtrig-timer.c: fix broken sysfs delay handling"). Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Antonio Ospite <ospite@studenti.unina.it> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds2011-11-0617-0/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
| * drivers/leds: Add export.h for THIS_MODULE to leds-cobalt-raq.cPaul Gortmaker2011-10-311-0/+1
| | | | | | | | | | | | | | In preparation of the module.h usage cleanup, call out the export.h to avoid build failures when that happens. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
| * drivers/leds: Add module.h to files using it implicitlyPaul Gortmaker2011-10-3116-0/+16
| | | | | | | | | | | | | | | | A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in the leds dir are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds2011-11-032-31/+64
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
| * | leds: Finish mc13783 conversion to the mc13xxx APISamuel Ortiz2011-10-241-4/+4
| | | | | | | | | | | | Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | leds: Convert mc13783 driver to mc13xxx MFDDavid Jander2011-10-241-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | mc13xxx is the more general API and most of the mc13783_... functions are going to die. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | mfd: Add asic3 based LED suspend/resume handlersPaul Parsons2011-10-241-1/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | Added led suspend/resume handlers to the leds/leds-asic3 and mfd/asic3 drivers. On suspend the leds will be turned off and their clocks disabled. On resume the reverse. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | | drivers/leds/leds-lp5521.c: check if reset is successfulSrinidhi KASAGAR2011-10-311-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure that the reset is successful by issuing a dummy read to R channel current register and check its default value. On some platforms, without this dummy read, any further access to {R/G/B}_EXEC will not have any impact. [akpm@linux-foundation.org: fix up code comment] Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Tested-by: Naga Radhesh <naga.radheshy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | leds: turn the blink_timer off before starting to blinkAntonio Ospite2011-10-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Depending on the implementation of the hardware blinking function in blink_set(), the led can support hardware blinking for some values of delay_on and delay_off and fall-back to software blinking for some other values. Turning off the blink_timer unconditionally before starting to blink make sure that a sequence like: OFF hardware blinking software blinking hardware blinking does not leave the software blinking timer active. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | leds: save the delay values after a successful call to blink_set()Antonio Ospite2011-10-311-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When calling the hardware blinking function implemented by blink_set(), the delay_on and delay_off values are not preserved across calls. Fix that and make the "timer" trigger work as expected when hardware blinking is available. BEFORE the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 0 0 $ echo 100 > delay_off $ cat delay_on delay_off 0 0 AFTER the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 100 0 $ echo 100 > delay_off $ cat delay_on delay_off 100 100 Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializingDavid Daney2011-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I get the following warning: ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:1559 __gpio_get_value+0x90/0x98() Modules linked in: Call Trace: [<ffffffff81440950>] dump_stack+0x8/0x34 [<ffffffff81141478>] warn_slowpath_common+0x78/0xa0 [<ffffffff812f0958>] __gpio_get_value+0x90/0x98 [<ffffffff81434f04>] create_gpio_led+0xdc/0x194 [<ffffffff8143524c>] gpio_led_probe+0x290/0x36c [<ffffffff8130e8b0>] driver_probe_device+0x78/0x1b0 [<ffffffff8130eaa8>] __driver_attach+0xc0/0xc8 [<ffffffff8130d7ac>] bus_for_each_dev+0x64/0xb0 [<ffffffff8130e130>] bus_add_driver+0x1c8/0x2a8 [<ffffffff8130f100>] driver_register+0x90/0x180 [<ffffffff81100438>] do_one_initcall+0x38/0x160 ---[ end trace ee38723fbefcd65c ]--- My GPIOs are on an I2C port expander, so we must use the *_cansleep() variant of the GPIO functions. This is was not being done in create_gpio_led(). We can change gpio_get_value() to gpio_get_value_cansleep() because it is only called from the platform_driver probe function, which is a context where we can sleep. Only tested on my gpio_cansleep() system, but it seems safe for all systems. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Trent Piepho <tpiepho@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | drivers/leds/leds-lm3530.c: add __devexit_p where neededAxel Lin2011-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." We have __devexit annotation for lm3530_remove(), so add __devexit_p to the `struct i2c_driver'. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | drivers/leds/leds-lp5521.c: avoid writing uninitialized value to ↵Axel Lin2011-10-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LP5521_REG_OP_MODE register If lp5521_read fails, engine_state variable is not initialized. If lp5521_read fails, we should return error. This patch fixes below warning. CC drivers/leds/leds-lp5521.o drivers/leds/leds-lp5521.c: In function 'lp5521_set_engine_mode': drivers/leds/leds-lp5521.c:168: warning: 'engine_state' may be used uninitialized in this function [akpm@linux-foundation.org: remove unneeded "ret |="] Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | drivers/leds/leds-renesas-tpu.c: move Renesas TPU LED driver platform dataMagnus Damm2011-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the platform_data include directory for the TPU LED driver, as suggested by Paul Mundt. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | drivers/leds/leds-renesas-tpu.c: update driver to use workqueueMagnus Damm2011-10-311-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a workqueue in the Renesas TPU LED driver to allow the Runtime PM code to sleep. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | drivers/leds/leds-lm3530.c: remove obsolete cleanup for clientdataWolfram Sang2011-10-311-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | drivers/leds/led-triggers.c: fix memory leakMasakazu Mokuno2011-10-311-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory for struct led_trigger should be kfreed in the led_trigger_register() error path. Also this function should return NULL on error. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | leds: Renesas TPU LED driverMagnus Damm2011-10-313-0/+357
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add V2 of the LED driver for a single timer channel for the TPU hardware block commonly found in Renesas SoCs. The driver has been written with optimal Power Management in mind, so to save power the LED is driven as a regular GPIO pin in case of maximum brightness and power off which allows the TPU hardware to be idle and which in turn allows the clocks to be stopped and the power domain to be turned off transparently. Any other brightness level requires use of the TPU hardware in PWM mode. TPU hardware device clocks and power are managed through Runtime PM. System suspend and resume is known to be working - during suspend the LED is set to off by the generic LED code. The TPU hardware timer is equipeed with a 16-bit counter together with an up-to-divide-by-64 prescaler which makes the hardware suitable for brightness control. Hardware blink is unsupported. The LED PWM waveform has been verified with a Fluke 123 Scope meter on a sh7372 Mackerel board. Tested with experimental sh7372 A3SP power domain patches. Platform device bind/unbind tested ok. V2 has been tested on the DS2 LED of the sh73a0-based AG5EVM. [axel.lin@gmail.com: include linux/module.h] Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'x86-geode-for-linus' of ↵Linus Torvalds2011-10-283-248/+0
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-geode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: geode: New PCEngines Alix system driver
| * | x86: geode: New PCEngines Alix system driverEd Wildgoose2011-09-213-248/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new driver replaces the old PCEngines Alix 2/3 LED driver with a new driver that controls the LEDs through the leds-gpio driver. The old driver accessed GPIOs directly, which created a conflict and prevented also loading the cs5535-gpio driver to read other GPIOs on the Alix board. With this new driver, we hook into leds-gpio which in turn uses GPIO to control the LEDs and therefore it's possible to control both the LEDs and access onboard GPIOs Driver is moved to platform/geode as requested by Grant and any other geode initialisation modules should move here also This driver is inspired by leds-net5501.c by Alessandro Zummo. Ideally, leds-net5501.c should also be moved to platform/geode. Additionally the driver relies on parts of the patch: 7f131cf3ed ("leds: leds-alix2c - take port address from MSR) by Daniel Mack to perform detection of the Alix board. [akpm@linux-foundation.org: include module.h] Signed-off-by: Ed Wildgoose <kernel@wildgooses.com> Cc: git@wildgooses.com Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <daniel@caiaq.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Richard Purdie <rpurdie@rpsys.net> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | doc: fix broken referencesPaul Bolle2011-09-271-1/+1
|/ | | | | | | | | | | | | There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* drivers/leds/ledtrig-timer.c: fix broken sysfs delay handlingJohan Hovold2011-09-141-0/+2
| | | | | | | | | | | | | | | Fix regression introduced by commit 5ada28bf7675 ("led-class: always implement blinking") which broke sysfs delay handling by not storing the updated value. Consequently it was only possible to set one of the delays through the sysfs interface as the other delay was automatically restored to it's default value. Reading the parameters always gave the defaults. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: <stable@kernel.org> [2.6.37+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-bd2802.c: bd2802_unregister_led_classdev() should ↵Axel Lin2011-08-251-0/+5
| | | | | | | | | | | | | | unregister all registered leds bd2802_unregister_led_classdev() should unregister all registered instances of led_classdev class that had registered by bd2802_register_led_classdev(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Kim Kyuwon <q1.kim@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: add missing include of linux/module.hAxel Lin2011-08-252-0/+2
| | | | | | | | | | | | | Add missing include of linux/module.h for drivers that use interfaces from linux/module.h. This patch fixes build errors. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Jonathan McDowell <noodles@earth.li> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Cc: Magnus Damm <damm@opensource.se> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* arch/arm/mach-ux500/board-u5500.c: calibrate ALS input voltageShreshtha Kumar Sahu2011-07-251-14/+53
| | | | | | | | | | | | Provide the support for auto calibration of ALS Zone boundaries based on min/max ALS input voltage. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-netxbig: make LEDS_NETXBIG depend on LEDS_CLASSAxel Lin2011-07-251-0/+1
| | | | | | | | | | | | | | | | | | | | | We call led_classdev_register/led_classdev_unregister in create_netxbig_led/delete_netxbig_led, thus make LEDS_NETXBIG depend on LEDS_CLASS. This patch fixes below build error if LEDS_CLASS is not configured. LD .tmp_vmlinux1 drivers/built-in.o: In function `create_netxbig_led': drivers/leds/leds-netxbig.c:350: undefined reference to `led_classdev_register' drivers/leds/leds-netxbig.c:361: undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `delete_netxbig_led': drivers/leds/leds-netxbig.c:313: undefined reference to `led_classdev_unregister' Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-sunfire.c: fix sunfire_led_generic_probe() error handlingAxel Lin2011-07-251-5/+7
| | | | | | | | | | | - return -ENOMEM if kzalloc fails, rather than the current -EINVAL - fix a memory leak in the case of goto out_unregister_led_cdevs Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-lp5521.c: provide section taggingLinus Walleij2011-07-251-2/+2
| | | | | | | | | Tag the and remove() function as __devexit respectively. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2011-07-222-21/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: (61 commits) gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming mcp23s08: add i2c support mcp23s08: isolate spi specific parts mcp23s08: get rid of setup/teardown callbacks gpio/tegra: dt: add binding for gpio polarity mcp23s08: remove unused work queue gpio/da9052: remove a redundant assignment for gpio->da9052 gpio/mxc: add device tree probe support ARM: mxc: use ARCH_NR_GPIOS to define gpio number gpio/mxc: get rid of the uses of cpu_is_mx() gpio/mxc: add missing initialization of basic_mmio_gpio shadow variables gpio: Move mpc5200 gpio driver to drivers/gpio GPIO: DA9052 GPIO module v3 gpio/tegra: Use engineering names in DT compatible property of/gpio: Add new method for getting gpios under different property names gpio/dt: Refine GPIO device tree binding gpio/ml-ioh: fix off-by-one for displaying variable i in dev_err gpio/pca953x: Deprecate meaningless device-tree bindings gpio/pca953x: Remove dynamic platform data pointer gpio/pca953x: Fix IRQ support. ...
OpenPOWER on IntegriCloud