summaryrefslogtreecommitdiffstats
path: root/drivers/leds
Commit message (Collapse)AuthorAgeFilesLines
* leds: add output inversion option to backlight triggerJanusz Krzysztofik2011-01-131-4/+57
| | | | | | | | | | | | | | | | | | | | | | Extend the LED backlight tirgger driver with an option that allows for inverting the trigger output polarity. With the invertion option provided, I (ab)use the backlight trigger for driving a LED that indicates LCD display blank condtition on my Amstrad Delta videophone. Since the machine has no dedicated power LED, it was not possible to distinguish if the display was blanked, or the machine was turned off, without touching it. The invert sysfs control is patterned after a similiar function of the GPIO trigger driver. [akpm@linux-foundation.org: make output match input, tighten input checking] [akpm@linux-foundation.org: make output match input, tighten input checking] Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds-lp5521: modify the way of setting led device nameArun Murthy2011-01-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | Currently the led device name is fetched from the device_type in I2C_BOARD_INFO which comes from the platform data. This name is in turn used to create an entry in sysfs. If there exists two or more lp5521 on a particular platform, the device_type in I2C_BOARD_INFO has to be the same, else lp5521 driver probe wont be called and if used so, results in run time warning "cannot create sysfs with same name" and hence a failure. The name that is used to create sysfs entry is to be passed by the struct led_platform_data. Hence adding an element of type const char * and change in lp5521 driver to use this name in creating the led device if present else use the name obtained by I2C_BOARD_INFO. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: lp5521: fix circular lockingSamu Onkalo2011-01-131-44/+8
| | | | | | | | | | | | | | | | | | Driver contained possibility for circular locking. One lock is held by sysfs-core and another one by the driver itself. This happened when the driver created or removed sysfs entries dynamically. There is no real need to do those operations. Now all the sysfs entries are created at probe and removed at removal. Engine load sysfs entries are now visible all the time. However, access to the entries fails if the engine is disabled or running. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Reviewed-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: lp5523: fix circular lockingSamu Onkalo2011-01-131-40/+16
| | | | | | | | | | | | | | | | | | Driver contained possibility for circular locking. One lock is held by sysfs-core and another one by the driver itself. This happened when the driver created or removed sysfs entries dynamically. There is no real need to do those operations. Now all the sysfs entries are created at probe and removed at removal. Engine load and mux configuration sysfs entries are now visible all the time. However, access to the entries fails if the engine is disabled or running. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Reviewed-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: leds-lp5523: modify the way of setting led device nameSamu Onkalo2011-01-131-1/+2
| | | | | | | | | | | | | Currently all leds channels begins with string lp5523. Patch adds a possibility to provide name via platform data. This makes it possible to have several chips without overlapping sysfs names. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: leds-pca9532 cleanupsAxel Lin2011-01-131-38/+28
| | | | | | | | | | | | - Remove unneeded input_free_device() after input_unregister_device(). - Add pca9532_destroy_devices() function for destroy devices. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-lp5521.c: fix potential buffer overflowVasiliy Kulikov2011-01-131-0/+2
| | | | | | | | | | | The code doesn't check first sscanf() return value. If first sscanf() failed then c contains some garbage. It might lead to reading uninitialised stack data in the second sscanf() call. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds2011-01-071-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
| * leds-wm8350: don't use flush_scheduled_work()Tejun Heo2010-12-241-1/+1
| | | | | | | | | | | | | | | | flush_scheduled_work() is deprecated and scheduled to be removed. Directly flush led->work on removal instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Richard Purdie <rpurdie@rpsys.net>
* | led_class: fix typo in blink APIJohannes Berg2010-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When I added led_blink_set I had a typo: the return value of the hw offload is a regular error code that is zero when succesful, and in that case software emulation should not be used, rather than the other way around. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | leds: fix up dependenciesJohannes Berg2010-12-021-9/+41
|/ | | | | | | | | | | | | | | | | | It's not useful to build LED triggers when there's no LEDs that can be triggered by them. Therefore, fix up the dependencies so that this cannot happen, and fix a few users that select triggers to depend on LEDS_CLASS as well (there is also one user that also selects LEDS_CLASS, which is OK). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Ingo Molnar <mingo@elte.hu> Cc: Arnd Hannemann <arnd@arndnet.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-lp5523.c: perform SW reset before detectionSamu Onkalo2010-11-251-7/+5
| | | | | | | | | | Chip detection may fail if the chip is in some odd state for example after system restart. Chip doesn't have HW reset line. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-lp5521.c: perform SW reset before detectionSamu Onkalo2010-11-251-7/+5
| | | | | | | | | | Chip detection may fail if the chip is in some odd state for example after system restart. Chip doesn't have HW reset line. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-lp5523.c: adjust delays and add comments to themSamu Onkalo2010-11-251-14/+17
| | | | | | | | | | Delays were little bit too long. Adjust delay times and add some comments to them. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-lp5521.c: adjust delays and add comments to themSamu Onkalo2010-11-251-9/+16
| | | | | | | | | | Delays were little bit too long. Adjust delay times and add some comments to them. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-lp5523.c: change some macros to functionsSamu Onkalo2010-11-251-3/+6
| | | | | | | | | | A small macro changed to inline function to have proper type checking. Inline added to two similar small functions. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-lp5521.c: change some macros to functionsSamu Onkalo2010-11-251-5/+16
| | | | | | | | | | Some small macros changed to inline functions to have proper type checking. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: fix bug with reading NAS SS4200 dmi codeSteven Rostedt2010-11-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While running randconfg with ktest.pl I stumbled upon this bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000003 IP: [<ffffffff815fe44f>] strstr+0x39/0x86 PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.37-rc1-test+ #6 DG965MQ/ RIP: 0010:[<ffffffff815fe44f>] [<ffffffff815fe44f>] strstr+0x39/0x86 RSP: 0018:ffff8800797cbd80 EFLAGS: 00010213 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: ffffffff82eb7ac9 RDI: 0000000000000003 RBP: ffff8800797cbda0 R08: ffff880000000003 R09: 0000000000030725 R10: ffff88007d294c00 R11: 0000000000014c00 R12: 0000000000000020 R13: ffffffff82eb7ac9 R14: ffffffffffffffff R15: ffffffff82eb7b08 FS: 0000000000000000(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000003 CR3: 0000000002a1d000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff8800797ca000, task ffff8800797d0000) Stack: 00000000000000ba ffffffff82eb7ac9 ffffffff82eb7ab8 00000000000000ba ffff8800797cbdf0 ffffffff81e2050f ffff8800797cbdc0 00000000815f913b ffff8800797cbe00 ffffffff82eb7ab8 0000000000000000 0000000000000000 Call Trace: [<ffffffff81e2050f>] dmi_matches+0x117/0x154 [<ffffffff81e205d7>] dmi_check_system+0x3d/0x8d [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8 [<ffffffff82e1ad49>] nas_gpio_init+0x24/0x2c8 [<ffffffff820d750d>] ? wm8350_led_init+0x0/0x20 [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8 [<ffffffff810022f7>] do_one_initcall+0xab/0x1b2 [<ffffffff82da749c>] kernel_init+0x248/0x331 [<ffffffff8100e624>] kernel_thread_helper+0x4/0x10 [<ffffffff82da7254>] ? kernel_init+0x0/0x331 Found that the nas_led_whitelist dmi_system_id structure array had no NULL end delimiter, causing the dmi_check_system() loop to read an undefined entry. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Dave Hansen <dave@sr71.net> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-gpio.c: properly initialize return valueDavidlohr Bueso2010-11-121-1/+1
| | | | | | | | | | | In the event that none of the configs are set (CONFIG_LEDS_GPIO_PLATFORM, CONFIG_LEDS_GPIO_OF, CONFIG_LEDS_GPIO_PLATFORM), we will return a bogus value when initializing the module. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: update LP552x support Kconfig and MakefileSamu Onkalo2010-11-122-0/+20
| | | | | | | | | | Provide configuration and compilation support for LP5521 and LP5523 Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: driver for National Semiconductors LP5523 chipSamu Onkalo2010-11-121-0/+1065
| | | | | | | | | | | | LP5523 chip is nine channel led driver with programmable engines. Driver provides support for that chip for direct access via led class or via programmable engines. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: driver for National Semiconductor LP5521 chipSamu Onkalo2010-11-121-0/+821
| | | | | | | | | | | | | | | | | | | | | | | | This patchset provides support for LP5521 and LP5523 LED driver chips from National Semicondutor. Both drivers supports programmable engines and naturally LED class features. Documentation is provided as a part of the patchset. I created "leds" subdirectory under Documentation. Perhaps the rest of the leds* documentation should be moved there. Datasheets are freely available at National Semiconductor www pages. This patch: LP5521 chip is three channel led driver with programmable engines. Driver provides support for that chip for direct access via led class or via programmable engines. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* led-class: always implement blinkingJohannes Berg2010-11-124-117/+116
| | | | | | | | | | | | | | | | | | | | Currently, blinking LEDs can be awkward because it is not guaranteed that all LEDs implement blinking. The trigger that wants it to blink then needs to implement its own timer solution. Rather than require that, add led_blink_set() API that triggers can use. This function will attempt to use hw blinking, but if that fails implements a timer for it. To stop blinking again, brightness_set() also needs to be wrapped into API that will stop the software blink. As a result of this, the timer trigger becomes a very trivial one, and hopefully we can finally see triggers using blinking as well because it's always easy to use. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds-net5501: taints kernel, add licenseRandy Dunlap2010-11-051-0/+2
| | | | | | | | | | | Add MODULE_LICENSE() that matches file comments so that kernel is not tainted. leds_net5501: module license 'unspecified' taints kernel. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: Remove auto blink in 88pm860xHaojian Zhuang2010-10-291-93/+26
| | | | | | | | | 88pm860x supports auto-blink LED in hardware. It messed with timer trigger. Now disable the auto-blink function. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* leds: add LED driver for Big Network series LEDsSimon Guinot2010-10-073-0/+459
| | | | | | | | | This patch add a LED class driver for LEDs found on the LaCie 2Big and 5Big Network v2 boards. The LEDs are wired to a CPLD and are controlled through a GPIO extension bus. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* leds: leds-ns2: fix private driver data storageSimon Guinot2010-10-071-3/+6
| | | | | | | | | | | | dev_set_drvdata() can't be used to set the driver private data pointer. This would overwrite the led classdev object previously registered by led_classdev_register(). Note that despite this mistake, the driver work fine because led_dat and led_dat->cdev are at the same memory address. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Kirkwood: add LaCie d2 Network v2 supportSimon Guinot2010-09-191-1/+1
| | | | | Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* leds: leds-ns2: fix lockingSimon Guinot2010-09-191-4/+5
| | | | | | | | | | | This patch replace all the lock functions with the irq safe variant. The ns2_led_{set,get}_mode() functions must be safe in all context. For example, the trigger timer call led_set_brightness() in a softirq context. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-08-121-2/+2
|\ | | | | | | | | | | | | * 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
| * of/device: Replace struct of_device with struct platform_deviceGrant Likely2010-08-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
* | leds: Remove owner field from attribute initialization in bd2802 driverGuenter Roeck2010-08-051-3/+1
|/ | | | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* leds: add LED driver for Network Space v2 LEDsSimon Guinot2010-07-163-0/+348
| | | | | | | | | | | | | This patch add a LED class driver for the dual-GPIO LEDs found on the Network Space v2 board (and parents). This include Internet Space v2, Network Space (Max) v2 and d2 Network v2 boards. This dual-GPIO LED is wired to a CPLD and can blink in relation with the SATA activity. The driver expose this capability through a "sata" sysfs attribute. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* i2c: Remove all i2c_set_clientdata(client, NULL) in driversWolfram Sang2010-06-034-9/+1
| | | | | | | | | | | | | | | | | | | | | I2C drivers can use the clientdata-pointer to point to private data. As I2C devices are not really unregistered, but merely detached from their driver, it used to be the drivers obligation to clear this pointer during remove() or a failed probe(). As a couple of drivers forgot to do this, it was agreed that it was cleaner if the i2c-core does this clearance when appropriate, as there is no guarantee for the lifetime of the clientdata-pointer after remove() anyhow. This feature was added to the core with commit e4a7b9b04de15f6b63da5ccdd373ffa3057a3681 to fix the faulty drivers. As there is no need anymore to clear the clientdata-pointer, remove all current occurrences in the drivers to simplify the code and prevent confusion. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* leds: Fix leds-gpio openfirmware compile issueRichard Purdie2010-05-281-1/+0
| | | | | | | Fix a compile issue when openfirmware is enabled from commit 2146325df2c2640059a9e064890c30c6e259b458. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Kconfig fixesRichard Purdie2010-05-281-3/+3
| | | | | | Soekris net5501 is x86 only and cleanup some undeeded dependencies Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add mc13783 LED supportPhilippe Rétornaz2010-05-263-0/+411
| | | | | | | This add basic led support for Freescale MC13783 PMIC. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: leds-ss4200: fix led_classdev_unregister twice in error handlingAxel Lin2010-05-261-1/+1
| | | | | | | | | | | | | In current implementation, if device_create_file failed in register_nasgpio_led, led_classdev_unregister will be executed twice. ( in register_nasgpio_led it calls led_classdev_unregister before return and in nas_gpio_init out_err ) This patch fixes it by only unregistering those that were successfully registered in out_err. ( not including last failed register_nasgpio_led call ) Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Dave Hansen <dave@sr71.net> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: leds-lp3944: properly handle lp3944_configure fail in lp3944_probeAxel Lin2010-05-261-2/+7
| | | | | | | | | | | | In current implementation, lp3944_probe return 0 even if lp3944_configure fail. Therefore, led_classdev_unregister will be executed twice ( in error handling of lp3944_configure and lp3944_remove ). This patch properly handles lp3944_configure fail in lp3944_probe. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: led-class: set permissions on max_brightness file to 0444Axel Lin2010-05-261-1/+1
| | | | | | | max_brightness is not writable, thus set permissions to 0444. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: leds-gpio: Change blink_set callback to be able to turn off blinkingBenjamin Herrenschmidt2010-05-261-7/+24
| | | | | | | | | | | | | | | | | | | The leds-gpio blink_set() callback follows the same prototype as the main leds subsystem blink_set() one. The problem is that to stop blink, normally, a leds driver does it in the brightness_set() callback when asked to set a new fixed value. However, with leds-gpio, the platform has no hook to do so, as this later callback results in a standard GPIO manipulation. This changes the leds-gpio specific callback to take a new argument that indicates whether the LED should be blinking or not and in what state it should be set if not. We also update the dns323 platform which seems to be the only user of this so far. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add LED driver for the Soekris net5501 boardBjarke Istrup Pedersen2010-05-263-0/+105
| | | | | | | | | | | | | | It is based on the previously submitted code by Alessandro Zummo, but is changed to use the new GPIO driver with 2.6.33, and the driver has been moved to drivers/leds where it belongs. [akpm@linux-foundation.org: coding-style fixes] [randy.dunlap@oracle.com: fix net5501 kconfig] Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: 88pm860x - fix checking in probe functionChristoph Fritz2010-05-261-3/+8
| | | | | | | | Improve device and platform data checks in probe function. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* of: Remove duplicate fields from of_platform_driverGrant Likely2010-05-221-1/+1
| | | | | | | | | | | | | | | | .name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
* of: Always use 'struct device.of_node' to get device node pointer.Grant Likely2010-05-181-1/+1
| | | | | | | | | | | | The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-3023-1/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* leds: Fix race between LED device uevent and actual attributes creationFlorian Fainelli2010-03-161-32/+8
| | | | | | | | | | | | | If we were to dynamically register/unregister leds and have udev or other daemons handle the leds class uevents, we would be notified of the adding of a new LED and if the daemon immediately tries to open one of the attributes of the led device, it would fail with a "no such file or directory" error since this the attributes are not yet created. Fix this by switching attributes to be class-wide, such that the driver core will register these attributes with device_add_attrs and then emit the kobject_uevent ADD signal. Signed-off-by: Fainelli <ffainelli@freebox.fr> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds-gpio: fix default state handling on OF platformsAnton Vorontsov2010-03-161-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver wrongly sets default state for LEDs that don't specify default-state property. Currently the driver handles default state this way: memset(&led, 0, sizeof(led)); for_each_child_of_node(np, child) { state = of_get_property(child, "default-state", NULL); if (state) { if (!strcmp(state, "keep")) led.default_state = LEDS_GPIO_DEFSTATE_KEEP; ... } ret = create_gpio_led(&led, ...); } Which means that all LEDs that do not specify default-state will inherit the last value of the default-state property, which is wrong. This patch fixes the issue by moving LED's template initialization into the loop body. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add Dell Business Class Netbook LED driverBob Rodgers2010-03-163-0/+208
| | | | | | | | | | | | | | | This patch adds an LED driver to support the Dell Activity LED on the Dell Latitude 2100 netbook and future products to come. The Activity LED is visible externally in the lid so classroom instructors can observe it from a distance. The driver uses the sysfs led_class and provides a standard LED interface. Signed-off by: Bob Rodgers <Robert_Rodgers@dell.com> Signed-off-by: Louis Davis <Louis_Davis@dell.com> Signed-off-by: Jim Dailey <Jim_Dailey@dell.com>, Developers Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Kconfig cleanupH Hartley Sweeten2010-03-161-36/+39
| | | | | | | | | | | Remove the need for "depends on LEDS_CLASS" by wrapping the affected config options in an if/endif block. Similar for "depends on LEDS_TRIGGERS". LEDS_COBALT_RAQ still has a "depends on LEDS_CLASS=y" since it cannot be selected to build as a module. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
OpenPOWER on IntegriCloud