summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sourcesShenwei Wang2015-08-241-0/+6
| | | | | | | | | | | | | | | | | | | | IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions: power management and wakeup source management. When the system is in WFI (wait for interrupt) mode, the GPC block will be the first block on the platform to be activated and signaled. In normal wait mode during cpu idle, the system can be woken up by any enabled interrupts. In standby or suspend mode, the system can only be wokem up by the pre-defined wakeup sources. Based-on-patch-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <shawn.guo@linaro.org> Cc: <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1440443055-7291-1-git-send-email-shenwei.wang@freescale.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* MIPS/irqchip: Move i8259 irqchip driver to drivers/irqchipRalf Baechle2015-07-311-0/+4
| | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2015-06-271-1/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...
| * MIPS/IRQCHIP: Move Ingenic SoC intc driver to drivers/irqchipPaul Burton2015-06-211-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the driver for Ingenic SoC interrupt controllers into drivers/irqchip where it belongs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10147/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS/IRQCHIP: Move irq_chip from arch/mips to drivers/irqchip.Ralf Baechle2015-06-211-0/+5
| | | | | | | | | | | | | | While at it, rename it because in drivers/irqchip no longer every CPU is a MIPS. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Merge tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linuxLinus Torvalds2015-06-251-0/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull Renesas H8/300 architecture re-introduction from Yoshinori Sato. We dropped arch/h8300 two years ago as stale and old, this is a new and more modern rewritten arch support for the same architecture. * tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux: (27 commits) h8300: fix typo. h8300: Always build dtb h8300: Remove ARCH_WANT_IPC_PARSE_VERSION sh-sci: Get register size from platform device clk: h8300: fix error handling in h8s2678_pll_clk_setup() h8300: Symbol name fix h8300: devicetree source h8300: configs h8300: IRQ chip driver h8300: clocksource h8300: clock driver h8300: Build scripts h8300: library functions h8300: Memory management h8300: miscellaneous functions h8300: process helpers h8300: compressed image support h8300: Low level entry h8300: kernel startup h8300: Interrupt and exceptions ...
| * | h8300: IRQ chip driverYoshinori Sato2015-06-231-0/+8
| |/ | | | | | | Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
* | irqchip: nvic: Support hierarchy irq domainStefan Agner2015-05-181-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | Add support for hierarchy irq domains. This is required to stack the MSCM interrupt router and the NVIC controller found in Vybrid SoC. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: marc.zyngier@arm.com Cc: linux@arm.linux.org.uk Cc: u.kleine-koenig@pengutronix.de Cc: olof@lixom.net Cc: arnd@arndb.de Cc: daniel.lezcano@linaro.org Cc: mark.rutland@arm.com Cc: pawel.moll@arm.com Cc: robh+dt@kernel.org Cc: ijc+devicetree@hellion.org.uk Cc: galak@codeaurora.org Cc: mcoquelin.stm32@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: shawn.guo@linaro.org Cc: kernel@pengutronix.de Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1431769465-26867-5-git-send-email-stefan@agner.ch Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2015-04-171-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for Linux 4.1. Most noteworthy: - Add more Octeon-optimized crypto functions - Octeon crypto preemption and locking fixes - Little endian support for Octeon - Use correct CSR to soft reset Octeons - Support LEDs on the Octeon-based DSR-1000N - Fix PCI interrupt mapping for the Octeon-based DSR-1000N - Mark prom_free_prom_memory() as __init for a number of systems - Support for Imagination's Pistachio SOC. This includes arch and CLK bits. I'd like to merge pinctrl bits later - Improve parallelism of csum_partial for certain pipelines - Organize DTB files in subdirs like other architectures - Implement read_sched_clock for all MIPS platforms other than Octeon - Massive series of 38 fixes and cleanups for the FPU emulator / kernel - Further FPU remulator work to support new features. This sits on a separate branch which also has been pulled into the 4.1 KVM branch - Clean up and fixes for the SEAD3 eval board; remove unused file - Various updates for Netlogic platforms - A number of small updates for Loongson 3 platforms - Increase the memory limit for ATH79 platforms to 256MB - A fair number of fixes and updates for BCM47xx platforms - Finish the implementation of XPA support - MIPS FDC support. No, not floppy controller but Fast Debug Channel :) - Detect the R16000 used in SGI legacy platforms - Fix Kconfig dependencies for the SSB bus support" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits) MIPS: Makefile: Fix MIPS ASE detection code MIPS: asm: elf: Set O32 default FPU flags MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G MIPS: Kconfig: Disable SMP/CPS for 64-bit MIPS: Hibernate: flush TLB entries earlier MIPS: smp-cps: cpu_set FPU mask if FPU present MIPS: lose_fpu(): Disable FPU when MSA enabled MIPS: ralink: add missing symbol for RALINK_ILL_ACC MIPS: ralink: Fix bad config symbol in PCI makefile. SSB: fix Kconfig dependencies MIPS: Malta: Detect and fix bad memsize values Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard. MIPS: Fix cpu_has_mips_r2_exec_hazard. MIPS: kernel: entry.S: Set correct ISA level for mips_ihb MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter MIPS: unaligned: Fix regular load/store instruction emulation for EVA MIPS: unaligned: Surround load/store macros in do {} while statements ...
| * IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllersKevin Cernekee2015-04-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the main peripheral IRQ controller on the BCM7xxx MIPS chips; it has the following characteristics: - 64 to 160+ level IRQs - Atomic set/clear registers - Reasonably predictable register layout (N status words, then N mask status words, then N mask set words, then N mask clear words) - SMP affinity supported on most systems - Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3 This driver registers one IRQ domain and one IRQ chip to cover all instances of the block. Up to 4 instances of the block may appear, as it supports 4-way IRQ affinity on BCM7435. The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC is used instead. So this driver is primarily intended for MIPS STB chips. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8844/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | irqchip: st: Supply new driver for STi based devicesLee Jones2015-03-031-0/+7
|/ | | | | | | | | | This driver is used to enable System Configuration Register controlled External, CTI (Core Sight), PMU (Performance Management), and PL310 L2 Cache IRQs prior to use. Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lkml.kernel.org/r/1424272444-16230-3-git-send-email-lee.jones@linaro.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge branch 'irq-irqdomain-arm-for-linus' of ↵Linus Torvalds2014-12-151-0/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq domain ARM updates from Thomas Gleixner: "This set of changes make use of hierarchical irqdomains to provide: - MSI/ITS support for GICv3 - MSI support for GICv2m - Interrupt polarity extender for GICv1 Marc has come more cleanups for the existing extension hooks of GIC in the pipeline, but they are going to be 3.20 material" * 'irq-irqdomain-arm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) irqchip: gicv3-its: Fix ITT allocation irqchip: gicv3-its: Move some alloc/free code to activate/deactivate irqchip: gicv3-its: Fix domain free in multi-MSI case irqchip: gic: Remove warning by including linux/irqdomain.h irqchip: gic-v2m: Add DT bindings for GICv2m irqchip: gic-v2m: Add support for ARM GICv2m MSI(-X) doorbell irqchip: mtk-sysirq: dt-bindings: Add bindings for mediatek sysirq irqchip: mtk-sysirq: Add sysirq interrupt polarity support irqchip: gic: Support hierarchy irq domain. irqchip: GICv3: Binding updates for ITS irqchip: GICv3: ITS: enable compilation of the ITS driver irqchip: GICv3: ITS: plug ITS init into main GICv3 code irqchip: GICv3: ITS: DT probing and initialization irqchip: GICv3: ITS: MSI support irqchip: GICv3: ITS: device allocation and configuration irqchip: GICv3: ITS: tables allocators irqchip: GICv3: ITS: LPI allocator irqchip: GICv3: ITS: irqchip implementation irqchip: GICv3: ITS command queue irqchip: GICv3: rework redistributor structure ...
| * irqchip: gic-v2m: Add support for ARM GICv2m MSI(-X) doorbellSuravee Suthikulpanit2014-11-261-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | ARM GICv2m specification extends GICv2 to support MSI(-X) with a new register frame. This allows a GICv2 based system to support MSI with minimal changes. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> [maz: converted the driver to use stacked irq domains, updated changelog] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416941243-7181-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * irqchip: gic: Support hierarchy irq domain.Yingjoe Chen2014-11-261-0/+1
| | | | | | | | | | | | | | | | | | Add support to use gic as a parent for stacked irq domain. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416902662-19281-2-git-send-email-yingjoe.chen@mediatek.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * irqchip: GICv3: ITS: enable compilation of the ITS driverMarc Zyngier2014-11-261-0/+4
| | | | | | | | | | | | | | | | Get the show on the road... Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416839720-18400-13-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * irqchip: GICv3: Convert to domain hierarchyMarc Zyngier2014-11-261-0/+1
| | | | | | | | | | | | | | | | | | | | In order to start supporting stacked domains, convert the GICv3 code base to the new domain hierarchy framework, which mostly amounts to supporting the new alloc/free callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416839720-18400-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2014-12-111-0/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: <asm/types.h> fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...
| * | MIPS: Move GIC to drivers/irqchip/Andrew Bresticker2014-11-241-0/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move GIC irqchip support to drivers/irqchip/ and rename the Kconfig option from IRQ_GIC to MIPS_GIC to avoid confusion with the ARM GIC. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | irqchip: bcm7120-l2: Decouple driver from brcmstb-l2Kevin Cernekee2014-11-091-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Some chips, such as BCM6328, only require bcm7120-l2. Some BCM7xxx STB configurations only require brcmstb-l2. Treat them as two separate entities, and update the mach-bcm dependencies to reflect the change. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lkml.kernel.org/r/1415342669-30640-13-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | irqchip: bcm7120-l2, brcmstb-l2: Remove ARM Kconfig dependencyKevin Cernekee2014-11-091-1/+0
| | | | | | | | | | | | | | | | | | | | This can compile for MIPS (or anything else) now. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lkml.kernel.org/r/1415342669-30640-8-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | irqchip: dw-apb-ictl: Select GENERIC_IRQ_CHIPJisheng Zhang2014-11-021-0/+1
|/ | | | | | | | | The dw-apb-ictl driver uses the generic-chip functions. Thus it needs to select GENERIC_IRQ_CHIP in Kconfig. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Link: https://lkml.kernel.org/r/1413982750-832-1-git-send-email-jszhang@marvell.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2014-10-091-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement delivers: - a cleanup series to get rid of mindlessly copied code. - another bunch of new pointlessly different interrupt chip drivers. Adding homebrewn irq chips (and timers) to SoCs must provide a value add which is beyond the imagination of mere mortals. - the usual SoC irq controller updates, IOW my second cat herding project" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) irqchip: gic-v3: Implement CPU PM notifier irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling irqchip: renesas-intc-irqpin: Add minimal runtime PM support irqchip: renesas-intc-irqpin: Add helper variable dev = &pdev->dev irqchip: atmel-aic5: Add sama5d4 support irqchip: atmel-aic5: The sama5d3 has 48 IRQs Documentation: bcm7120-l2: Add Broadcom BCM7120-style L2 binding irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller irqchip: renesas-irqc: Add binding docs for new R-Car Gen2 SoCs irqchip: renesas-irqc: Add DT binding documentation irqchip: renesas-intc-irqpin: Document SoC-specific bindings openrisc: Get rid of handle_IRQ arm64: Get rid of handle_IRQ ARM: omap2: irq: Convert to handle_domain_irq ARM: imx: tzic: Convert to handle_domain_irq ARM: imx: avic: Convert to handle_domain_irq irqchip: or1k-pic: Convert to handle_domain_irq irqchip: atmel-aic5: Convert to handle_domain_irq irqchip: atmel-aic: Convert to handle_domain_irq irqchip: gic-v3: Convert to handle_domain_irq ...
| * irqchip: keystone: Add irq controller ip driverGrygorii Strashko2014-08-171-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | On Keystone SOCs, DSP cores can send interrupts to ARM host using the IRQ controller IP. It provides 28 IRQ signals to ARM. The IRQ handler running on HOST OS can identify DSP signal source by analyzing SRCCx bits in IPCARx registers. This is one of the component used by the IPC mechanism used on Keystone SOCs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lkml.kernel.org/r/1406126430-9978-1-git-send-email-grygorii.strashko@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | Merge tag 'drivers-for-linus' of ↵Linus Torvalds2014-10-081-0/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...
| * | arm: omap: irq: move irq.c to drivers/irqchip/Felipe Balbi2014-09-161-0/+5
| |/ | | | | | | | | | | | | | | Just move the code over as it has no dependencies on arch/arm/ anymore. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2014-10-071-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ...
| * treewide: Fix typos in KconfigMasanari Iida2014-09-261-1/+1
| | | | | | | | | | | | | | | | This patch fix spelling typos found in Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds2014-08-081-1/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
| * ARM: S5PC100: no more support S5PC100 SoCKukjin Kim2014-07-131-1/+0
| | | | | | | | | | | | | | | | | | | | | | This patch removes supporting codes for s5pc100 because no more used now. [jason@lakedaemon.net: for drivers/irqchip/Kconfig] Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | Merge branch 'irqchip/atmel-aic' into irqchip/coreJason Cooper2014-07-181-0/+14
|\ \ | | | | | | | | | | | | Topic branch set up to facilitate merging the rest of the series which removes the driver from arch code.
| * | irqchip: atmel-aic: Add atmel AIC/AIC5 driversBoris BREZILLON2014-07-171-0/+14
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add AIC (Advanced Interrupt Controller) and AIC5 (AIC5 is an evolution of the AIC block) drivers. Put common code in irq-atmel-aic-common.c/.h so that both driver can access shared functions (this will ease maintenance). These drivers are only compatible with dt enabled board and replace the old implementation found in arch/arm/mach-at91/irq.c. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Link: https://lkml.kernel.org/r/1405012462-766-4-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | Merge tag 'tags/deps-irqchip-gic-3.17' into irqchip/coreJason Cooper2014-07-181-0/+5
|\ \ | | | | | | | | | | | | From local branch irqchip/gic, this is topic branch that was set up to facilitate merging other changes depending on the new GICv3 driver.
| * | irqchip: gic-v3: Initial support for GICv3Marc Zyngier2014-07-081-0/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Generic Interrupt Controller (version 3) offers services that are similar to GICv2, with a number of additional features: - Affinity routing based on the CPU MPIDR (ARE) - System register for the CPU interfaces (SRE) - Support for more that 8 CPUs - Locality-specific Peripheral Interrupts (LPIs) - Interrupt Translation Services (ITS) This patch adds preliminary support for GICv3 with ARE and SRE, non-secure mode only. It relies on higher exception levels to grant ARE and SRE access. Support for LPI and ITS will be added at a later time. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Zi Shen Lim <zlim@broadcom.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Tirumalesh Chalamarla <tchalamarla@cavium.com> Reviewed-by: Yun Wu <wuyun.wu@huawei.com> Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Tirumalesh Chalamarla<tchalamarla@cavium.com> Tested-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/1404140510-5382-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | irqchip: or1k-pic: Migrate from arch/openrisc/Stefan Kristiansson2014-07-011-0/+4
|/ | | | | | | | | | | | | | | | | | | | | In addition to consolidating the or1k-pic with other interrupt controllers, this makes OpenRISC less tied to its on-cpu interrupt controller. All or1k-pic specific parts are moved out of irq.c and into drivers/irqchip/irq-or1k-pic.c In that transition, the functionality have been divided into three chip variants. One that handles level triggered interrupts, one that handles edge triggered interrupts and one that handles the interrupt controller that is present in the or1200 OpenRISC cpu implementation. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Link: https://lkml.kernel.org/r/1401136302-27654-1-git-send-email-stefan.kristiansson@saunalahti.fi Acked-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controllerFlorian Fainelli2014-05-271-0/+6
| | | | | | | | | | | | This patch adds support for the Level-2 interrupt controller hardware found in Broadcom Set Top Box System-on-a-Chip devices. This interrupt controller is implemented using the generic IRQ chip driver with separate enable and disable registers. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Link: https://lkml.kernel.org/r/1400892054-24457-2-git-send-email-f.fainelli@gmail.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'drivers-3.15' of ↵Linus Torvalds2014-04-051-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
| * DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IPSricharan R2014-02-051-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some socs have a large number of interrupts requests to service the needs of its many peripherals and subsystems. All of the interrupt lines from the subsystems are not needed at the same time, so they have to be muxed to the irq-controller appropriately. In such places a interrupt controllers are preceded by an CROSSBAR that provides flexibility in muxing the device requests to the controller inputs. This driver takes care a allocating a free irq and then configuring the crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should be called right before the irqchip_init, so that it is setup to handle the irqchip callbacks. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Kumar Gala <galak@codeaurora.org> (for DT binding portion) Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
* | ARM: clps711x: Add CLPS711X irqchip driverAlexander Shiyan2014-02-281-0/+8
|/ | | | | | | This adds the irqchip driver for Cirrus Logic CLPS711X series SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Merge tag 'xtensa-next-20140123' of git://github.com/czankel/xtensa-linuxLinus Torvalds2014-01-251-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull Xtensa patches from Chris Zankel: "The major changes are adding support for SMP for Xtensa, fixing and cleaning up the ISS (simulator) network driver, and better support for device trees" * tag 'xtensa-next-20140123' of git://github.com/czankel/xtensa-linux: (40 commits) xtensa: implement ndelay xtensa: clean up udelay xtensa: enable HAVE_PERF_EVENTS xtensa: remap io area defined in device tree xtensa: support default device tree buses xtensa: initialize device tree clock sources xtensa: xtfpga: fix definitions of platform devices xtensa: standardize devicetree cpu compatible strings xtensa: avoid duplicate of IO range definitions xtensa: fix ATOMCTL register documentation xtensa: Enable irqs after cpu is set online xtensa: ISS: raise network polling rate to 10 times/sec xtensa: remove unused XTENSA_ISS_NETWORK Kconfig parameter xtensa: ISS: avoid simple_strtoul usage xtensa: Switch to sched_clock_register() xtensa: implement CPU hotplug xtensa: add SMP support xtensa: add MX irqchip xtensa: clear timer IRQ unconditionally in its handler xtensa: clean up do_interrupt/do_IRQ ...
| * xtensa: add MX irqchipMax Filippov2014-01-141-0/+4
| | | | | | | | | | | | | | | | MX is an interrupt distributor used in some SMP-capable xtensa configurations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* | irqchip: add DesignWare APB ICTL interrupt controllerSebastian Hesselbarth2013-12-131-0/+4
|/ | | | | | | | | | This adds an irqchip driver and corresponding devicetree binding for the secondary interrupt controllers based on Synopsys DesignWare IP dw_apb_ictl. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
* irq-imgpdc: add ImgTec PDC irqchip driverJames Hogan2013-08-211-0/+5
| | | | | | | | | | | | | | | | | | | | | | | Add irqchip driver for the ImgTec PowerDown Controller (PDC) as found in the TZ1090. The PDC has a number of general system wakeup (SysWake) interrupts (which would for example be connected to a power button or an external peripheral), and a number of peripheral interrupts which can also wake the system but are connected straight to specific low-power peripherals (such as RTC or Infrared). It has a single interrupt output for SysWakes, and individual interrupt outputs for each peripheral. The driver demuxes the SysWake interrupt line, and passes the peripheral interrupts straight through. It also handles the set_wake interrupt operation to enable/disable the appropriate wake event bits. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: linux-metag@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org
* irqchip: Add support for ARMv7-M NVICUwe Kleine-König2013-06-261-0/+5
| | | | | | | | | | | | | | | | | | This interrupt controller is integrated in all Cortex-M3 and Cortex-M4 machines. Support for this controller appeared in Catalin's Cortex tree based on 2.6.33 but was nearly completely rewritten. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-arm-kernel@lists.infradead.org Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: kernel@pengutronix.de Link: http://lkml.kernel.org/r/1372231128-11802-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip: Add TB10x interrupt controller driverChristian Ruppert2013-06-251-0/+5
| | | | | | | | | | | | | | | The SOC interrupt controller driver for the Abilis Systems TB10x series of SOCs based on ARC700 CPUs. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: devicetree-discuss@lists.ozlabs.org Link: http://lkml.kernel.org/r/1372177797-9458-1-git-send-email-christian.ruppert@abilis.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip: Add support for Marvell Orion SoCsSebastian Hesselbarth2013-06-111-0/+5
| | | | | | | | | | | | | | | | | | | | | This patch adds an irqchip driver for the main interrupt controller found on Marvell Orion SoCs (Kirkwood, Dove, Orion5x, Discovery Innovation). Corresponding device tree documentation is also added. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: John Stultz <john.stultz@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1370536034-23956-2-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip: Renesas IRQC driverMagnus Damm2013-03-181-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for external IRQ pins connected to the IRQC hardware block on recent SoCs from Renesas. The IRQC hardware block is used together with more recent ARM based SoCs using the GIC. As usual the GIC requires external IRQ trigger setup somewhere else which in this particular case happens to be IRQC. This driver implements the glue code needed to configure IRQ trigger and also handle mask/unmask and demux of external IRQ pins hooked up from the IRQC to the GIC. Tested on r8a73a4 but is designed to work with a wide range of SoCs. The driver requires one GIC SPI per external IRQ pin to operate. Each driver instance will handle up to 32 external IRQ pins. The SoCs using this driver are currently mainly used together with regular platform devices so this driver allows configuration via platform data to support things like static interrupt base address. DT support will be added incrementally in the not so distant future. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* irqchip: Renesas INTC External IRQ pin driverMagnus Damm2013-03-181-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for external IRQ pins connected to the INTC block on recent SoCs from Renesas. The INTC hardware block usually contains a rather wide range of features ranging from external IRQ pin handling to legacy interrupt controller support. On older SoCs the INTC is used as a general purpose interrupt controller both for external IRQ pins and on-chip devices. On more recent ARM based SoCs with Cortex-A9 the main interrupt controller is the GIC, but IRQ trigger setup still need to happen in the INTC hardware block. This driver implements the glue code needed to configure IRQ trigger and also handle mask/unmask and demux of external IRQ pins hooked up from the INTC to the GIC. Tested on sh73a0 and r8a7779. The hardware varies quite a bit with SoC model, for instance register width and bitfield widths vary wildly. The driver requires one GIC SPI per external IRQ pin to operate. Each driver instance will handle up to 8 external IRQ pins. The SoCs using this driver are currently mainly used together with regular platform devices so this driver allows configuration via platform data to support things like static interrupt base address. DT support will be added incrementally in the not so distant future. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* irqchip: Move ARM VIC to drivers/irqchipRob Herring2013-01-121-0/+15
| | | | | | | | Now that we have drivers/irqchip, move VIC irqchip to drivers/irqchip. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
* irqchip: Move ARM GIC to drivers/irqchipRob Herring2013-01-121-0/+8
| | | | | | | | | Now that we have drivers/irqchip, move GIC irqchip to drivers/irqchip. This is necessary to share the GIC with arm and arm64. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
* irqchip: add basic infrastructureThomas Petazzoni2013-01-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the recent creation of the drivers/irqchip/ directory, it is desirable to move irq controller drivers here. At the moment, the only driver here is irq-bcm2835, the driver for the irq controller found in the ARM BCM2835 SoC, present in Rasberry Pi systems. This irq controller driver was exporting its initialization function and its irq handling function through a header file in <linux/irqchip/bcm2835.h>. When proposing to also move another irq controller driver in drivers/irqchip, Rob Herring raised the very valid point that moving things to drivers/irqchip was good in order to remove more stuff from arch/arm, but if it means adding gazillions of headers files in include/linux/irqchip/, it would not be very nice. So, upon the suggestion of Rob Herring and Arnd Bergmann, this commit introduces a small infrastructure that defines a central irqchip_init() function in drivers/irqchip/irqchip.c, which is meant to be called as the ->init_irq() callback of ARM platforms. This function calls of_irq_init() with an array of match strings and init functions generated from a special linker section. Note that the irq controller driver initialization function is responsible for setting the global handle_arch_irq() variable, so that ARM platforms no longer have to define the ->handle_irq field in their DT_MACHINE structure. A global header, <linux/irqchip.h> is also added to expose the single irqchip_init() function to the reset of the kernel. A further commit moves the BCM2835 irq controller driver to this new small infrastructure, therefore removing the include/linux/irqchip/ directory. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [rob.herring: reword commit message to reflect use of linker sections.] Signed-off-by: Rob Herring <rob.herring@calxeda.com>
OpenPOWER on IntegriCloud