summaryrefslogtreecommitdiffstats
path: root/drivers/input/tablet/wacom_wac.h
Commit message (Collapse)AuthorAgeFilesLines
* Input: wacom - move the USB (now hid) Wacom driver in drivers/hidBenjamin Tissoires2014-07-251-169/+0
| | | | | | | | wacom.ko is now a full HID driver, we have to move it into the proper subdirectory: drivers/hid. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - remove field pktlen declaration in the list of devicesBenjamin Tissoires2014-07-251-1/+1
| | | | | | | | | | | | pktlen is now overwritten by the driver directly by reading the hid report descriptor. There is no need to declare it statically. We also move down the position of the field in the struct so that we can keep the current declaration of Wacom devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - use in-kernel HID parserBenjamin Tissoires2014-07-251-2/+2
| | | | | | | | | | | | | HID already parses the report descriptor, so use it instead of implementing our own. The special case for Bamboo PT 3rd gen is also removed and handled in the same way Intuos 5 is treated, by hardcoding it in the driver. Last, the unit_exponent stored into the hid field already is signed, so there is no need to handle a two's complement anymore. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - switch from an USB driver to a HID driverBenjamin Tissoires2014-07-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | All USB Wacom tablets are actually HID devices. For historical reasons, they are handled as plain USB devices. The current code makes more and more reference to the HID subsystem like implementing its own HID report descriptor parser to handle new devices. From the user point of view, we can transparently switch from this state to a driver handled in the HID subsystem and clean up a lot of USB specific code in the wacom.ko driver. The other benefit once the USB dependecies have been removed is that we can use a tool like uhid to make regression tests and allow further cleanup or new implementations without risking breaking current behaviors. To match the current handling of devices in wacom_wac.c, we rely on the hid_type set by usbhid. usbhid sets the hid_type to HID_TYPE_USBMOUSE when it sees a USB boot mouse protocol declared and HID_TYPE_USBNONE when the device is plain HID. There is thus a one to one matching between the list of supported devices before and after the switch from USB to HID. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - create a separate input device for padsBenjamin Tissoires2014-07-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the pad events are sent through the stylus input device for the Intuos/Cintiqs, and through the touch input device for the Bamboos. To differentiate the buttons pressed on the pad from the ones pressed on the stylus, the Intuos/Cintiq uses MISC_SERIAL and ABS_MISC. This lead to a multiplexing of the events into one device, which are then splitted out in xf86-input-wacom. Bamboos are not using MISC events because the pad is attached to the touch interface, and only BTN_TOUCH is used for the finger (and DOUBLE_TAP, etc...). However, the user space driver still splits out the pad from the touch interface in the same way it does for the pro line devices. The other problem we can see with this fact is that some of the Intuos and Cintiq have a wheel, and the effective range of the reported values is [0..71]. Unfortunately, the airbrush stylus also sends wheel events (there is a small wheel on it), but in the range [0..1023]. From the user space point of view it is kind of difficult to understand that because the wheel on the pad are quite common, while the airbrush tool is not. A solution to fix all of these problems is to split out the pad device from the stylus/touch. This decision makes more sense because the pad is not linked to the absolute position of the finger or pen, and usually, the events from the pad are filtered out by the compositor, which then convert them into actions or keyboard shortcuts. For backward compatibility with current xf86-input-wacom, the pad devices still present the ABS_X, ABS_Y and ABS_MISC events, but they can be completely ignored in the new implementation. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - process outbound for newer CintiqsPing Cheng2014-05-291-0/+2
| | | | | | | | | | New Cintiq tablets have a 200 tablet counts outside of screen area. Add x/y_min for ABS_X/Y to pass this information to userland. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add support for three new ISDv4 sensorsJason Gerecke2014-05-141-0/+3
| | | | | | | | | | | | | | | | | | | | | This patch adds support for the 0x4004, 0x5000, and 0x5002 sensors found on what should be the Motion R12, Fujitsu Q704, and Fujitsu T904. These tablets use a new report ID (3) for their touch packets and a slightly different HID descriptor format, but are otherwise largely identical in protocol to the "MTTPC" tablets. Note: * The R12 uses its 0x4004 sensor for touch input only. A pen interface is not present in its HID descriptor, though its possible a 0x4004 may be used for pen input by other tablet PCs in the future. * The 0x5002 sensor appears to use a new report ID (8) for its pen packets. The other sensors continue to use the traditional report ID (2). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add support for 0x116 sensor on Win8 Panasonic CF-H2Jason Gerecke2014-05-141-0/+1
| | | | | | | | | | The Win8 version of the Panasonic CF-H2 includes a new Wacom device. The pen interface appears to use the same protocol as before, but the touch interface has been tweaked to send Win8-compatible reports. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add support for DTU-1031Ping Cheng2014-01-201-1/+5
| | | | | Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add reporting of SW_MUTE_DEVICE eventsPing Cheng2013-12-161-0/+5
| | | | | | | | | | | | | New Intuos series models added a hardware switch to turn touch data on/off. The state of the switch is reported periodically from the tablet. To report the state the driver will emit SW_MUTE_DEVICE events. Reviewed_by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add support for three new Intuos devicesPing Cheng2013-11-251-0/+2
| | | | | | | | | | | Two tablets in this series support both pen and touch. One (Intuos S) only supports pen. This patch also updates the driver to process wireless devices that do not support touch interface. Tested-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - not all multi-interface devices support touchPing Cheng2013-10-221-1/+3
| | | | | | | | | | Some multi-interface devices support expresskeys on a separate interface, such as Bamboo; some multi-interface devices do not support touch at all, such as Pen only Intuos5. Make sure we report the right device names. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add support for three new Intuos Pro devicesPing Cheng2013-09-201-0/+3
| | | | | | Acked-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - support EMR and MFT sensors of Cintiq Companion HybridJason Gerecke2013-09-201-0/+1
| | | | | | | | | | | | | | | Adds support for the sensors integrated in to the Cintiq Companion Hybrid. These sensors use by-and-large the same protocol as the Cintiq 24HD touch. NOTE: The ExpressKeys on the Cintiq Companion Hybrid are wired to both the EMR controller and CPU GPIO pins. It may be necessary to disable their functionality in this driver if building a custom Android kernel for this device (lest two events be sent to userspace for every button press). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add three new display tabletsPing Cheng2013-05-051-0/+1
| | | | | | | Cintiq 13HD, DTK 2241, and Cintiq 22HDT are supported. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add support for DTH-2242Ping Cheng2013-02-131-0/+1
| | | | | | | It is a pen with 10 finger touch device. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - use new input-mt routinesPing Cheng2013-01-061-1/+0
| | | | | | | | | This patch brings wacom driver in-sync with input-mt changes made in release 3.7. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add support for 2 new multi-touch tablets (0x100 and 0x101)Ping Cheng2012-11-081-0/+2
| | | | | | | This adds support for the two new multi-touch tablets. Signed-off-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add touch sensor support for Cintiq 24HD touchJason Gerecke2012-10-251-0/+3
| | | | | | | | | Decode multitouch reports from the touch sensor of the Cintiq 24HD touch. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Input: wacom - handle split-sensor devices with internal hubsJason Gerecke2012-10-251-0/+2
| | | | | | | | | | | | | | | | | | | | Like our other pen-and-touch products, the Cintiq 24HD touch needs data to be shared between its two sensors to facilitate proximity-based palm rejection. Unlike other tablets that report sensor data through separate interfaces of the same USB device, the Cintiq 24HD touch has separate USB devices that are connected to an internal USB hub. This patch makes it possible to designate the USB VID/PID of the other device so that the two may share data. To ensure we don't accidentally link to a sensor from a physically separate device (if several have been plugged in), we limit the search to siblings (i.e., devices directly connected to the same hub). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Input: wacom - add support to Cintiq 22HDPing Cheng2012-07-241-1/+2
| | | | | Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - add two new devices (0xed and 0xef)Ping Cheng2012-06-121-0/+2
| | | | | | | | | 0xed supports pen and one finger touch; 0xef is pen only. Signed-off-by: Ping Cheng <pingc@wacom.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - rearrange type enumPing Cheng2012-06-121-3/+3
| | | | | | | | | So we can simplify a few type related if statements Signed-off-by: Ping Cheng <pingc@wacom.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - add 0xE5 (MT device) supportPing Cheng2012-04-291-0/+8
| | | | | | | | | | | | | | | | | | | Main part of patch is adding support for a new Wacom MT touch packet and labels these devices using MTSCREEN type. Other items of interest: Delete some duplicate code in HID parsing for Y info since its already done in X path. In wacom_query_tablet_data(), only invoke the set report that requests tablets to send Wacom Touch packets for Finger interfaces. Mostly, this is to make code intent clear. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - retrieve maximum number of touch pointsPing Cheng2012-04-291-0/+1
| | | | | | | | | From the HID usage table when it is supported. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - add Intuos5 Touch Ring/ExpressKey supportJason Gerecke2012-04-041-0/+1
| | | | | | | | | | | Intuos5 uses a new report type for Touch Ring and ExpressKey data. Note that data from the capacitive sensors present on the ExpressKeys will be ignored until a proper way is found to expose it. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - add basic Intuos5 supportJason Gerecke2012-04-041-0/+3
| | | | | | | | | | | This patch adds support for the basic pen functions of Intuos5 tablets. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - wireless battery statusChris Bagwell2012-03-251-0/+1
| | | | | | | Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - create inputs when wireless connectChris Bagwell2012-03-251-0/+1
| | | | | | | | | | | | | | | | | | | | When a tablet connect or disconnect is detected, schedule work queue to register or unregister related input devices. When a wireless tablet connects, it reports same USB PID used if tablet is connected with USB cable. Use this to update features values, set input capabilities, and then register device. From there, the Pen and Touch interfaces will reuse the existing tablet's IRQ routines. Its possible that 1 receiver is shared with 2 tablets with different PID (small and medium Bamboo for example) so the input is unregister at disconnect to better support this case. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - wireless monitor frameworkChris Bagwell2012-03-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | The 3rd gen Bamboo Pen & Touch and Intuos5 tablets support an optional wireless module. When its receiver is plugged into USB, it presents 3 interfaces: 0) Monitor 1) Pen and 2) Touch. The exact capabilities of the Pen and Touch interfaces can not be determined until a tablet connection is established and reported over the Monitor interface. This patch detects this wireless receiver and enables interrupt packets to be processed for the Monitor interface. Processing the data in packets will be left to another patch. Since it doesn't make sense to create an input device for the Monitor interface, it is not created. Creation of Pen and Touch input device is also delayed until monitor packets can be processed. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - use switch statement for wacom_tpc_irq()Ping Cheng2012-01-311-0/+2
| | | | | | | | | And add two new data formats. Tested-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - add support for Cintiq 24HDJason Gerecke2011-12-121-0/+1
| | | | | | | | | | | | | Adds support for the Cintiq 24HD. There are two quirks about this model that haven't been seen in prior tablets. First, a second touch ring is present on this display; it is being exposed via the ABS_THROTTLE axis. Second, three capacitive buttons at the top of the unit are available; though physically a touch strip, we report the use of these buttons with generic KEY_ events. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - 3rd gen Bamboo P&Touch packet supportChris Bagwell2011-10-261-1/+2
| | | | | | | | | | | | | | 3rd generation Bamboo Pen and Touch tablets reuse the older stylus packet but add an extra fixed zero pad byte to end. The touch packets are quite different since it supports tracking of up to 16 touches. The packet is 64-byte fixed size but contains up to 15 smaller messages indicating data for a single touch or for tablet button presses. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - read 3rd gen Bamboo Touch HID dataChris Bagwell2011-10-261-0/+1
| | | | | | | | | | | | | Override invalid pen based pktlen and x/y_max with touch values from HID report. Since active area of pen and touch are same on these devices, set physical x/y size while pen x/y_max and resolution are still valid. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - report resolution for pen devicesPing Cheng2011-03-261-0/+2
| | | | | | | | | | | | Touch resolution is reported to the userland by retrieving the value from the HID descriptor. But pen resolution is not since it can not be retrieved. The current Wacom X driver has a resolution table. To centralize the source of these values, the resolution entries are added in the wacom_features struct for x and y coordinates respectively. The values are then reported to the userland. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - support one finger touch the touchscreen wayPing Cheng2011-03-121-0/+1
| | | | | | | | | | | | | | | | | | | | There are two types of 1FGT devices supported in wacom_wac.c. Changing them to follow the existing touchscreen format, i.e., only report BTN_TOUCH as a valid tool type. Touch data will be ignored if pen is in proximity. This requires a touch up event sent if touch was down when pen comes in. The touch up event should be sent before any pen events are emitted. Otherwise, two pointers would race for the cursor. However, we can not send a touch up inside wacom_tpc_pen since pen and touch are on different logical port. That is why we have to check if touch is up before sending pen events. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - do not send 2FGT Tablet PC events in TAP formatPing Cheng2011-03-121-3/+2
| | | | | | | | 2FGT Tablet PC touch events were processed in _TAP_ format. Remove them so we can change to _MT_ format. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* input: mt: Move tracking and pointer emulation to input-mtHenrik Rydberg2010-12-161-4/+0
| | | | | | | | | | | | | | | The drivers using the type B protocol all report tracking information the same way. The contact id is semantically equivalent to ABS_MT_SLOT, and the handling of ABS_MT_TRACKING_ID only complicates the driver. The situation can be improved upon by providing a common pointer emulation code, thereby removing the need for the tracking id in the driver. This patch moves all tracking event handling over to the input core, simplifying both the existing drivers and the ones currently in preparation. Acked-by: Ping Cheng <pingc@wacom.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
* Input: wacom - add a quirk for low resolution Bamboo devicesHenrik Rydberg2010-09-051-0/+1
| | | | | | | | | | | | | | The Bamboo Touch reports a sub-screen resolution of 480x320. The signal-to-noise ratio is only about 100, so filtering is needed in order to reduce the jitter to a usable level. However, the low resolution leads to round-off errors in the EWMA filter, resulting in extremely jerky pointer motion. This patch explicitly sets a higher resolution for those devices, and tells this to the completion handler via a low-resolution quirk. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - add support for the Bamboo Touch trackpadHenrik Rydberg2010-09-051-0/+4
| | | | | | | | | | Add support for the Bamboo Touch trackpad, and make it work with both the Synaptics X Driver and the Multitouch X Driver. The device uses MT slots internally, so the choice of protocol is a given. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - collect device quirks into single functionHenrik Rydberg2010-09-051-0/+4
| | | | | | | | | Collect device-specific code into a single function, and use quirks to flag specific behavior instead. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - parse the Bamboo device familyPing Cheng2010-09-051-0/+2
| | | | | | | | | The Bamboo devices have multiple interfaces which need to be setup separately. Use the HID parsing mechanism to achieve that. Signed-off-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - add fuzz parameters to featuresHenrik Rydberg2010-09-051-0/+4
| | | | | | | | | | The signal-to-noise ratio varies between devices, but currently all devices are treated the same way. Add fuzz parameters to the feature struct, allowing for tailored treatment of devices. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - add support for DTU2231 and DTU1631Ping Cheng2010-06-281-0/+1
| | | | | | | Add support for the two new devices: DTU2231 and DTU1631. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - add Cintiq 21UX2 and Intuos4 WLPing Cheng2010-06-041-0/+1
| | | | | Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - streamline 2-finger touch supportPing Cheng2010-04-131-2/+3
| | | | | | | | Clean up 2-finger touch support. This still needs to be converted to proper multi-touch protocol. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - get rid of input event wrappersDmitry Torokhov2010-04-131-0/+1
| | | | | | | | Input event interface is pretty stable so let's get rig of wrappers for input_event() and fiends and call them directly. This will simplify and speed up code a bit. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - do not allocate wacom_wac separatelyDmitry Torokhov2010-04-131-0/+2
| | | | | | | | There is no reason for allocating struct wacom_wac separately from struct wacom since both have the same lifetime rules and are not shared. Also make 'open' field a boolean. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: wacom - share pen info with touch of the same IDPing Cheng2010-04-131-0/+5
| | | | | | | | | | | | | | | | Touch enbaled devices share the same product ID with pen. However, we do not want to post touch events while pen is in prox. To do so, we used to keep a local static variable to keep track of if pen is in prox or not. This works fine for Tablet PC devices since there is only one device attached. With the newer touch enabled regular tablets, we can not make this assumption any more, i.e, one system may have more than one identical tablet plugged in. This patch adds an new entry, shared, into the struct wacom_wac so touch data can access pen data to locally. This solution assumes the two tools (touch and pen) of the same ID will be probed one after the other without interruption in between by another Wacom device of the same ID.
* Input: wacom - replace WACOM_PKGLEN_PENABLEDPing Cheng2010-03-011-1/+0
| | | | | | | | | Replacing WACOM_PKGLEN_PENABLED with WACOM_PKGLEN_GRAPHIRE since they both represent the same value, 8. This value will be used for both Tablet PC and Bamboo with touch devices. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
OpenPOWER on IntegriCloud