summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband
Commit message (Collapse)AuthorAgeFilesLines
* RDMA/nes: Fix interrupt moderation low thresholdJohn Lacombe2008-02-262-9/+6
| | | | | | | | | | | | | Interrupt moderation low threshold value was incorrectly triggering, indicating that the threshold should be lowered. The impact was the timer was likely to become 40usecs and get stuck there. The biggest side effect was too many interrupts and nonoptimal performance. Signed-off-by: John Lacombe <jlacombe@neteffect.com> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix CRC endianness for RDMA connection establishment on big-endianFaisal Latif2008-02-262-4/+21
| | | | | | | | | | | | | | With commit ef19454b ("[LIB] crc32c: Keep intermediate crc state in cpu order"), the behavior of crc32c changes on big-endian platforms. Our algorithm expects the previous behavior; otherwise we have RDMA connection establishment failure on big-endian platforms like powerpc. Apply cpu_to_le32() to value returned by crc32c() to get the previous behavior. Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix use-after-free in mini_cm_dec_refcnt_listen()Faisal Latif2008-02-261-0/+1
| | | | | | | | Fix use-after-free spotted by Coverity checker flagged by Adrian Bunk. Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix use-after-free in nes_create_cq()Glenn Streiff2008-02-261-3/+0
| | | | | | | | | Just delete the debugging statement so we don't use cqp_request after freeing it. Adrian Bunk flagged this use-after-free issue spotted by the Coverity checker. Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix a check-after-use in nes_probe()Adrian Bunk2008-02-261-1/+1
| | | | | | | | Fix a check-after-use spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix a memory leak in schedule_nes_timer()Adrian Bunk2008-02-261-2/+2
| | | | | | | | Fix a memory leak spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix off-by-oneAdrian Bunk2008-02-251-1/+1
| | | | | | | | Fix an off-by-one spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Resurrect error path dead codeChien Tung2008-02-251-2/+3
| | | | | | | | | | | | | | | | | Adrian Bunk pointed out that a Coverity scan found some apparently dead code in nes_verbs.c that really shouldn't have been dead. The function nes_create_cq() was missing the assignment err = 1; just prior to an iteration that conditionally set err = 0 if a PBL was found for a given virtual CQ. I also noticed we should have been returning -EFAULT on a couple related error paths. Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Fix shift calc in build_phys_page_list() for 1-entry page listsBryan Rosenburg2008-02-251-8/+2
| | | | | | | | | | | | | A single entry (addr 0x10001000, size 0x2000) will get converted to page address 0x10000000 with a page size of 0x4000. The code as it stands doesn't address the single buffer case, but in fact it allows the subsequent single-buffer special case to be eliminated entirely. Because the mask now includes the (page adjusted) starting and ending addresses, the general case works for the single buffer case as well. Signed-off-by: Bryan Rosenburg <rosnbrg@us.ibm.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Free correct MPT on error exit from mthca_fmr_alloc()Roland Dreier2008-02-191-1/+1
| | | | | | | | | When mthca_fmr_alloc() returns an error, it should free the MPT at the index key, not mr->ibmr.lkey, since the lkey has been mangled by hw_index_to_key() and no longer is the real index. This bug causes corruption of the MPT table free bitmap when mthca_fmr_alloc() fails. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IPoIB/cm: Fix ipoib_cm_dev_stop() cleanup when drain times outPradeep Satyanarayana2008-02-191-4/+6
| | | | | | | | | | | | | | | | Commit efcd9971 ("IPoIB/cm: Factor out ipoib_cm_free_rx_reap_list()") introduced a bug in ipoib_cm_dev_stop() when the receive drain times out. In that case, the function moves all the pending rx stuff into a private list but then calls ipoib_cm_free_rx_reap_list(), which handles a different list. Fix this by moving everything to the rx_reap_list that will actually get freed up. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=906>. Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix possible array overrunRoland Dreier2008-02-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In nes_create_qp(), the test if (nesqp->mmap_sq_db_index > NES_MAX_USER_WQ_REGIONS) { is used to error out if the db_index is too large; however, if the test doesn't trigger, then the index is used as nes_ucontext->mmap_nesqp[nesqp->mmap_sq_db_index] = nesqp; and mmap_nesqp is declared as struct nes_qp *mmap_nesqp[NES_MAX_USER_WQ_REGIONS]; which leads to an array overrun if the index is exactly equal to NES_MAX_USER_WQ_REGIONS. Fix this by bailing out if the index is greater than or equal to NES_MAX_USER_WQ_REGIONS. This was spotted by the Coverity checker (CID 2162). Acked-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix VLAN supportChien Tung2008-02-161-2/+8
| | | | | | | | | | | We need to account for the VLAN header size in nes_netdev_change_mtu() and nes_netdev_init(). Also, add spin lock/unlock during VLAN RX registration so only one process can assign VLAN group for a given interface at a time. Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix MAC interrupt erroneously masked on ifdownGlenn Streiff2008-02-151-16/+36
| | | | | | | | | | Only mask out MAC interrupt if necessary and re-enable on ifup. There could be multiple netdevs going through the same MAC. MAC interrupts should not be masked off until the last netdev is downed. Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB: Fix return value in ib_device_register_sysfs()Li Zefan2008-02-151-1/+3
| | | | | | | | | | If kobject_create_and_add() fails and returns NULL, the current code in ib_device_register_sysfs() does not set ret and hence returns 0. Set ret to -ENOMEM for this failure, so that the caller knows that ib_device_register_sysfs() actually failed. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cma: Do not issue MRA if user rejects connection requestSean Hefty2008-02-141-1/+9
| | | | | | | | | | | | | | | | | | | | | | There's an undesirable interaction with issuing MRA requests to increase connection timeouts and the listen backlog. When the rdma_cm receives a connection request, it queues an MRA with the ib_cm. (The ib_cm will send an MRA if it receives a duplicate REQ.) The rdma_cm will then create a new rdma_cm_id and give that to the user, which in this case is the rdma_user_cm. If the listen backlog maintained in the rdma_user_cm is full, it destroys the rdma_cm_id, which in turns destroys the ib_cm_id. The ib_cm_id generates a REJ because the state of the ib_cm_id has changed to MRA sent, versus REQ received. When the backlog is full, we just want to drop the REQ so that it is retried later. Fix this by deferring queuing the MRA until after the user of the rdma_cm has examined the connection request. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mlx4: mlx4_ib_fmr_alloc() should call mlx4_fmr_enable()Jack Morgenstein2008-02-141-1/+1
| | | | | | | | | Currently mlx4_ib_fmr_alloc() calls mlx4_mr_enable() instead of mlx4_fmr_enable(). The two functions are equivalent at the moment, but this is not really correct (and the change is needed to fix a bug). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IPoIB: Remove unused struct ipoib_cm_tx.ibwc memberEli Cohen2008-02-141-1/+0
| | | | | | | struct ipoib_cm_tx.ibwc is unused since commit 1b524963 ("IPoIB/cm: Use common CQ for CM send completions"), so remove it. Signed-off-by: Eli Cohen <eli@mellanox.co.il>
* IPoIB: On P_Key change event, reset state properlyJack Morgenstein2008-02-141-0/+1
| | | | | | | | | | | | | | | | | In P_Key event handling, if the old P_Key is no longer available, the driver must call ipoib_ib_dev_stop() -- just as it does when the P_Key is still available (see procedure __ipoib_ib_dev_flush()). When a P_Key becomes available, the driver will perform ipoib_open(), which assumes that the QP is in RESET, the cm_id has been destroyed/deleted, etc. If ipoib_ib_dev_stop() is not called as described above, then these assumptions will be false, and the attempt to bring the interface up will fail. Found by Mellanox QA. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Convert to use be16_add_cpu()Marcin Slusarz2008-02-131-1/+1
| | | | | | | | | | | | | | | | | | replace: big_endian_variable = cpu_to_beX(beX_to_cpu(big_endian_variable) + expression_in_cpu_byteorder); with: beX_add_cpu(&big_endian_variable, expression_in_cpu_byteorder); Generated with a semantic patch. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/cxgb3: Fail loopback connectionsSteve Wise2008-02-131-0/+17
| | | | | | | | The cxgb3 HW and driver don't support loopback RDMA connections. So fail any connection attempt where the destination address is local. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/cm: Fix infiniband_cm class kobject ref countingRoland Dreier2008-02-121-14/+8
| | | | | | | | | | | | | | Commit 9af57b7a ("IB/cm: Add basic performance counters") introduced a bug in how the reference count for cm_class.subsys.kobj was handled: the path that released a device did a kobject_put() on that kobject, but there was no kobject_get() in the path the handles adding a device. So the reference count ended up too low, which leads to bad things. Fix up and simplify the reference counting to avoid this. (Actually, I introduced the bug when fixing the patch up to match some of Greg's kobject changes, but who's counting) Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/cm: Remove debug printk()s that snuck upstreamRoland Dreier2008-02-121-4/+0
| | | | | | Pesky little devils, sneaking around... Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Add missing sg_init_table() in mthca_map_user_db()Roland Dreier2008-02-121-0/+1
| | | | | | | | Usually harmless, since the scatterlist is always hard-coded to a length of 1, but it triggers a BUG() if CONFIG_DEBUG_SG=y, so we better fix it. This fixes <http://bugzilla.kernel.org/show_bug.cgi?id=9934>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IPoIB: Add send gather supportEli Cohen2008-02-084-30/+83
| | | | | | | | | | | | | | This patch acts as a preparation for using checksum offload for IB devices capable of inserting/verifying checksum in IP packets. The patch does not actaully turn on NETIF_F_SG - we defer that to the patches adding checksum offload capabilities. We only add support for send gathers for datagram mode, since existing HW does not support checksum offload on connected QPs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IPoIB: Add high DMA feature flagEli Cohen2008-02-081-1/+3
| | | | | | | | | | | | All current InfiniBand devices can handle all DMA addresses, and it's hard to imagine anyone would be silly enough to build a new device that couldn't. Therefore, enable the NETIF_F_HIGHDMA feature for IPoIB. This has no effect for no, but is needed when we enable gather/scatter support and checksum stateless offloads. Signed-off-by: Eli Cohen <eli@mellnaox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mlx4: Use multiple WQ blocks to post smaller send WQEsJack Morgenstein2008-02-083-36/+188
| | | | | | | | | | | | | | | | | | | | | | | | | | | ConnectX HCA supports shrinking WQEs, so that a single work request can be made of multiple units of wqe_shift. This way, WRs can differ in size, and do not have to be a power of 2 in size, saving memory and speeding up send WR posting. Unfortunately, if we do this then the wqe_index field in CQEs can't be used to look up the WR ID anymore, so our implementation does this only if selective signaling is off. Further, on 32-bit platforms, we can't use vmap() to make the QP buffer virtually contigious. Thus we have to use constant-sized WRs to make sure a WR is always fully within a single page-sized chunk. Finally, we use WRs with the NOP opcode to avoid wrapping around the queue buffer in the middle of posting a WR, and we set the NoErrorCompletion bit to avoid getting completions with error for NOP WRs. However, NEC is only supported starting with firmware 2.2.232, so we use constant-sized WRs for older firmware. And, since MLX QPs only support SEND, we use constant-sized WRs in this case. When stamping during NOP posting, do stamping following setting of the NOP WQE valid bit. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mlx4: Consolidate code to get an entry from a struct mlx4_bufRoland Dreier2008-02-063-19/+3
| | | | | | | | | | We use struct mlx4_buf for kernel QP, CQ and SRQ buffers, and the code to look up an entry is duplicated in get_cqe_from_buf() and the QP and SRQ versions of get_wqe(). Factor this out into mlx4_buf_offset(). This will also make it easier to switch over to using vmap() for buffers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Add a driver for NetEffect RNICsGlenn Streiff2008-02-0416-1/+16551
| | | | | | | Add a standard NIC and RDMA/iWARP driver for NetEffect 1/10Gb ethernet adapters. Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Return proper error codes from mthca_fmr_alloc()Olaf Kirch2008-02-041-2/+6
| | | | | | | | | | If the allocation of the MTT or the mailbox failed, mthca_fmr_alloc() would return 0 (success) no matter what. This leads to crashes a little down the road, when we try to dereference eg mr->mtt, which was really ERR_PTR(-Ewhatever). Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB: Avoid marking __devinitdata as constRoland Dreier2008-02-041-1/+1
| | | | Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mlx4: Actually print out the driver versionRoland Dreier2008-02-041-1/+8
| | | | | | | The string mlx4_ib_version was defined, but never used. Print out the version once when the first device is initialized. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ib_mthca: Pre-link receive WQEs in Tavor modeEli Cohen2008-02-042-14/+22
| | | | | | | | | | | | We have recently discovered that Tavor mode requires each WQE in a posted list of receive WQEs to have a valid NDA field at all times. This requirement holds true for regular QPs as well as for SRQs. This patch prelinks the receive queue in a regular QP and keeps the free list in SRQ always properly linked. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Remove checks for srq->first_free < 0Eli Cohen2008-02-041-23/+3
| | | | | | | | The SRQ receive posting functions make sure that srq->first_free never becomes negative, so we can remove tests of whether it is negative. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/fmr_pool: Allocate page list for pool FMRs only when caching enabledOr Gerlitz2008-02-041-2/+5
| | | | | | | | | | Allocate memory for the page_list field of struct ib_pool_fmr only when caching is enabled for the FMR pool, since the field is not used otherwise. This can save significant amounts of memory for large pools with caching turned off. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Retry stale connectionsDavid Dillow2008-02-042-12/+42
| | | | | | | | | | | | | | | When a host just goes away (crash, power loss, etc.) without tearing down its IB connections, it can get stale connection errors when it tries to reconnect to targets upon rebooting. Retrying the connection a few times will prevent sysadmins from playing the "which disk(s) went missing?" game. This would have made things slightly quicker when tracking down some of the recent bugs, but it also helps quite a bit when you've got a large number of targets hanging off a wedged server. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* mlx4_core: Don't read reserved fields in mlx4_QUERY_ADAPTER()Jack Morgenstein2008-02-041-0/+1
| | | | | | | | | | | The firmware QUERY_ADAPTER command does not return vendor_id, device_id, and revision_id; eliminate these fields from the query. Initialize the rev_id field of the mlx4 device via init_node_data (MAD IFC query), as is done in the query_device verb implementation. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Don't read reserved fields in mthca_QUERY_ADAPTER()Jack Morgenstein2008-02-043-4/+12
| | | | | | | | | | | | | For memfree devices, the firmware QUERY_ADAPTER command does not return vendor_id, device_id, and revision_id; do not return these fields in the QUERY_ADAPTER function for memfree devices. Instead, for memfree devices, initialize the rev_id field of the mthca device via init_node_data (MAD IFC query), as is done in the query_device verb implementation. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IPoIB: Remove a misleading debug printOr Gerlitz2008-02-041-4/+2
| | | | | | | | | Commit 732a2170 ("IB/ipoib: Bound the net device to the ipoib_neigh structue") left a misleading debug print (n->dev would be a bond device only if boding is used). Clean it up. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IPoIB: Handle bonding failover race for connected neighbours tooOr Gerlitz2008-02-041-6/+7
| | | | | | | | | | | | Move up the code that checks for a situation where the remote GID stored in the ipoib_neigh is different than the one present in the neighbour (handle gratuitous ARP) or that a bonding fail over has happened but the neighbour still has a pointer to an ipoib_neigh created by a different device than the current slave. This will cause the driver to apply the check also for connected mode neighbours. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mthca: Fix and simplify page size calculation in mthca_reg_phys_mr()Roland Dreier2008-02-041-17/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In mthca_reg_phys_mr(), we calculate the page size for the HCA hardware to use to map the buffer list passed in by the consumer. For example, if the consumer passes in [0] addr 0x1000, size 0x1000 [1] addr 0x2000, size 0x1000 then the algorithm would come up with a page size of 0x2000 and a list of two pages, at 0x0000 and 0x2000. Usually, this would work fine since the memory region would start at an offset of 0x1000 and have a length of 0x2000. However, the old code did not take into account the alignment of the IO virtual address passed in. For example, if the consumer passed in a virtual address of 0x6000 for the above, then the offset of 0x1000 would not be used correctly because the page mask of 0x1fff would result in an offset of 0. We can fix this quite neatly by making sure that the page shift we use is no bigger than the first bit where the start of the first buffer and the IO virtual address differ. Also, we can further simplify the code by removing the special case for a single buffer by noticing that it doesn't matter if we use a page size that is too big. This allows the loop to compute the page shift to be replaced with __ffs(). Thanks to Bryan S Rosenburg <rosnbrg@us.ibm.com> for pointing out the original bug and suggesting several ways to improve this patch. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ehca: Add PMA supportHoang-Nam Nguyen2008-02-044-1/+98
| | | | | | | | | | This patch enables ehca to redirect any PMA queries to the actual PMA QP. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Reviewed-by: Joachim Fenkes <fenkes@de.ibm.com> Reviewed-by: Christoph Raisch <raisch@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ehca: Update sma_attr also in case of disruptive config changeJoachim Fenkes2008-02-041-0/+2
| | | | | Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ehca: Prevent sending UD packets to QP0Joachim Fenkes2008-02-041-0/+4
| | | | | | | | | | | | The IB spec doesn't allow packets to QP0 sent on any other VL than VL15. Hardware doesn't filter those packets on the send side, so we need to do this in the driver and firmware. As eHCA doesn't support QP0, we can just filter out all traffic going to QP0, regardless of SL or VL. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/cm: Add interim support for routed pathsSean Hefty2008-02-041-23/+66
| | | | | | | | | | | | | | | | | | Paths with hop_limit > 1 indicate that the connection will be routed between IB subnets. Update the subnet local field in the CM REQ based on the hop_limit value. In addition, if the path is routed, then set the LIDs in the REQ to the permissive LIDs. This is used to indicate to the passive side that it should use the LIDs in the received local route header (LRH) associated with the REQ when programming the QP. This is a temporary work-around to the IB CM to support IB router development until the IB router specification is completed. It is not anticipated that this work-around will cause any interoperability issues with existing stacks or future stacks that will properly support IB routers when defined. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* [SCSI] remove use_sg_chainingJames Bottomley2008-01-301-1/+0
| | | | | | | | | | | With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25Linus Torvalds2008-01-293-10/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25: (1470 commits) [IPV6] ADDRLABEL: Fix double free on label deletion. [PPP]: Sparse warning fixes. [IPV4] fib_trie: remove unneeded NULL check [IPV4] fib_trie: More whitespace cleanup. [NET_SCHED]: Use nla_policy for attribute validation in ematches [NET_SCHED]: Use nla_policy for attribute validation in actions [NET_SCHED]: Use nla_policy for attribute validation in classifiers [NET_SCHED]: Use nla_policy for attribute validation in packet schedulers [NET_SCHED]: sch_api: introduce constant for rate table size [NET_SCHED]: Use typeful attribute parsing helpers [NET_SCHED]: Use typeful attribute construction helpers [NET_SCHED]: Use NLA_PUT_STRING for string dumping [NET_SCHED]: Use nla_nest_start/nla_nest_end [NET_SCHED]: Propagate nla_parse return value [NET_SCHED]: act_api: use PTR_ERR in tcf_action_init/tcf_action_get [NET_SCHED]: act_api: use nlmsg_parse [NET_SCHED]: act_api: fix netlink API conversion bug [NET_SCHED]: sch_netem: use nla_parse_nested_compat [NET_SCHED]: sch_atm: fix format string warning [NETNS]: Add namespace for ICMP replying code. ...
| * [NETNS]: Add namespace parameter to ip_route_output_key.Denis V. Lunev2008-01-281-2/+2
| | | | | | | | | | | | | | Needed to propagate it down to the ip_route_output_flow. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NETNS]: Add namespace parameter to ip_route_output_flow.Denis V. Lunev2008-01-281-1/+1
| | | | | | | | | | | | | | Needed to propagate it down to the __ip_route_output_key. Signed_off_by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NETNS]: Add namespace parameter to ip_dev_find.Denis V. Lunev2008-01-282-3/+3
| | | | | | | | | | | | | | | | in_dev_find() need a namespace to pass it to fib_get_table(), so add an argument. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud