summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/mlx5/cq.c
Commit message (Collapse)AuthorAgeFilesLines
* IB/core: Fix input len in multiple user verbsAmrani, Ram2017-08-221-4/+2
| | | | | | | | | | | | Most user verbs pass user data to the kernel with the inclusion of the ib_uverbs_cmd_hdr structure. This is problematic because the vendor has no ideas if the verb was called by a legacy verb or an extended verb. Also, the incosistency between the verbs is confusing. Fixes: 565197dd8fb1 ("IB/core: Extend ib_uverbs_create_cq") Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* {net, IB}/mlx5: Replace mlx5_vzalloc with kvzallocLeon Romanovsky2017-05-141-3/+3
| | | | | | | | | | Commit a7c3e901a46f ("mm: introduce kv[mz]alloc helpers") added proper implementation of mlx5_vzalloc function to the MM core. This made the mlx5_vzalloc function useless, so let's remove it. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* IB/mlx5: Set correct SL in completion for RoCEMoni Shoua2017-04-211-3/+16
| | | | | | | | | | | | | | | | | There is a difference when parsing a completion entry between Ethernet and IB ports. When link layer is Ethernet the bits describe the type of L3 header in the packet. In the case when link layer is Ethernet and VLAN header is present the value of SL is equal to the 3 UP bits in the VLAN header. If VLAN header is not present then the SL is undefined and consumer of the completion should check if IB_WC_WITH_VLAN is set. While that, this patch also fills the vlan_id field in the completion if present. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Fix wrong use of kfree at bad flow in create_cq_userBodong Wang2017-04-211-1/+1
| | | | | | | | | The kfree was called to free cqb, while it should free *cqb. Fixes: 1cbe6fc86ccf ("IB/mlx5: Add support for CQE compressing") Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Allow future extension of libmlx5 input dataEli Cohen2017-01-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Current check requests that new fields in struct mlx5_ib_alloc_ucontext_req_v2 that are not known to the driver be zero. This was introduced so new libraries passing additional information to the kernel through struct mlx5_ib_alloc_ucontext_req_v2 will be notified by old kernels that do not support their request by failing the operation. This schecme is problematic since it requires libmlx5 to issue the requests with descending input size for struct mlx5_ib_alloc_ucontext_req_v2. To avoid this, we require that new features that will obey the following rules: If the feature requires one or more fields in the response and the at least one of the fields can be encoded such that a zero value means the kernel ignored the request then this field will provide the indication to the library. If no response is required or if zero is a valid response, a new field should be added that indicates to the library whether its request was processed. Fixes: b368d7cb8ceb ('IB/mlx5: Add hca_core_clock_offset to udata in init_ucontext') Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* IB/mlx5: Use blue flame register allocator in mlx5_ibEli Cohen2017-01-091-5/+3
| | | | | | | | | | | | | | Make use of the blue flame registers allocator at mlx5_ib. Since blue flame was not really supported we remove all the code that is related to blue flame and we let all consumers to use the same blue flame register. Once blue flame is supported we will add the code. As part of this patch we also move the definition of struct mlx5_bf to mlx5_ib.h as it is only used by mlx5_ib. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* mlx5: Fix naming convention with respect to UARsEli Cohen2017-01-081-3/+3
| | | | | | | | | | | | | | This establishes a solid naming conventions for UARs. A UAR (User Access Region) can have size identical to a system page or can be fixed 4KB depending on a value queried by firmware. Each UAR always has 4 blue flame register which are used to post doorbell to send queue. In addition, a UAR has section used for posting doorbells to CQs or EQs. In this patch we change names to reflect this conventions. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* Merge tag 'for-linus' of ↵Linus Torvalds2016-12-151-3/+31
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "This is the complete update for the rdma stack for this release cycle. Most of it is typical driver and core updates, but there is the entirely new VMWare pvrdma driver. You may have noticed that there were changes in DaveM's pull request to the bnxt Ethernet driver to support a RoCE RDMA driver. The bnxt_re driver was tentatively set to be pulled in this release cycle, but it simply wasn't ready in time and was dropped (a few review comments still to address, and some multi-arch build issues like prefetch() not working across all arches). Summary: - shared mlx5 updates with net stack (will drop out on merge if Dave's tree has already been merged) - driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe - debug cleanups - new connection rejection helpers - SRP updates - various misc fixes - new paravirt driver from vmware" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (210 commits) IB: Add vmw_pvrdma driver IB/mlx4: fix improper return value IB/ocrdma: fix bad initialization infiniband: nes: return value of skb_linearize should be handled MAINTAINERS: Update Intel RDMA RNIC driver maintainers MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers IB/core: fix unmap_sg argument qede: fix general protection fault may occur on probe IB/mthca: Replace pci_pool_alloc by pci_pool_zalloc mlx5, calc_sq_size(): Make a debug message more informative mlx5: Remove a set-but-not-used variable mlx5: Use { } instead of { 0 } to init struct IB/srp: Make writing the add_target sysfs attr interruptible IB/srp: Make mapping failures easier to debug IB/srp: Make login failures easier to debug IB/srp: Introduce a local variable in srp_add_one() IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build IB/multicast: Check ib_find_pkey() return value IPoIB: Avoid reading an uninitialized member variable IB/mad: Fix an array index check ...
| * IB/mlx5: Add support for CQE compressingBodong Wang2016-12-131-1/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | CQE compressing reduces PCI overhead by coalescing and compressing multiple CQEs into a single merged CQE. Successful compressing improves message rate especially for small packet traffic. CQE compressing is supported for all 64B CQE formats (with certain limitations) generated by RQ/Responder or by SQ/Requestor. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * IB/mlx5: Limit mkey page size to 2GBMajd Dibbiny2016-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The maximum page size in the mkey context is 2GB. Until today, we didn't enforce this requirement in the code, and therefore, if we got a page size larger than 2GB, we have passed zeros in the log_page_shift instead of the actual value and the registration failed. This patch limits the driver to use compound pages of 2GB for mkeys. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | IB/mlx5: Use cache line size to select CQE strideDaniel Jurgens2016-11-161-2/+1
|/ | | | | | | | | | | | | | | | | When creating kernel CQs use 128B CQE stride if the cache line size is 128B, 64B otherwise. This prevents multiple CQEs from residing in a 128B cache line, which can cause retries when there are concurrent read and writes in one cache line. Tested with IPoIB on PPC64, saw ~5% throughput improvement. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
* Merge tag 'for-linus' of ↵Linus Torvalds2016-10-091-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull main rdma updates from Doug Ledford: "This is the main pull request for the rdma stack this release. The code has been through 0day and I had it tagged for linux-next testing for a couple days. Summary: - updates to mlx5 - updates to mlx4 (two conflicts, both minor and easily resolved) - updates to iw_cxgb4 (one conflict, not so obvious to resolve, proper resolution is to keep the code in cxgb4_main.c as it is in Linus' tree as attach_uld was refactored and moved into cxgb4_uld.c) - improvements to uAPI (moved vendor specific API elements to uAPI area) - add hns-roce driver and hns and hns-roce ACPI reset support - conversion of all rdma code away from deprecated create_singlethread_workqueue - security improvement: remove unsafe ib_get_dma_mr (breaks lustre in staging)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits) staging/lustre: Disable InfiniBand support iw_cxgb4: add fast-path for small REG_MR operations cxgb4: advertise support for FR_NSMR_TPTE_WR IB/core: correctly handle rdma_rw_init_mrs() failure IB/srp: Fix infinite loop when FMR sg[0].offset != 0 IB/srp: Remove an unused argument IB/core: Improve ib_map_mr_sg() documentation IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets IB/mthca: Move user vendor structures IB/nes: Move user vendor structures IB/ocrdma: Move user vendor structures IB/mlx4: Move user vendor structures IB/cxgb4: Move user vendor structures IB/cxgb3: Move user vendor structures IB/mlx5: Move and decouple user vendor structures IB/{core,hw}: Add constant for node_desc ipoib: Make ipoib_warn ratelimited IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue IB/ipoib: Remove deprecated create_singlethread_workqueue ...
| * IB/mlx5: Move and decouple user vendor structuresLeon Romanovsky2016-10-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch decouples and moves vendors specific structures to common UAPI folder which will be visible to all consumers. These structures are used by user-space library driver (libmlx5) and currently manually copied to that library. This move will allow cross-compile against these files and simplify introduction of vendor specific data. Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-09-121-20/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
| * IB/mlx5: Don't return errors from poll_cqLeon Romanovsky2016-09-021-20/+2
| | | | | | | | | | | | | | | | | | Remove returning errors from mlx5 poll_cq function. Polling CQ operation in kernel never fails by Mellanox HCA architecture and respective driver design. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | {net,IB}/mlx5: CQ commands via mlx5 ifcSaeed Mahameed2016-08-141-47/+63
|/ | | | | | | | Remove old representation of manually created CQ commands layout, and use mlx5_ifc canonical structures and defines. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
* IB/mlx5: Reset flow support for IB kernel ULPsMaor Gottlieb2016-06-231-1/+86
| | | | | | | | | | | | | | | | | | | | | | | | | The driver exposes interfaces that directly relate to HW state. Upon fatal error, consumers of these interfaces (ULPs) that rely on completion of all their posted work-request could hang, thereby introducing dependencies in shutdown order. To prevent this from happening, we manage the relevant resources (CQs, QPs) that are used by the device. Upon a fatal error, we now generate simulated completions for outstanding WQEs that were not completed at the time the HW was reset. It includes invoking the completion event handler for all involved CQs so that the ULPs will poll those CQs. When polled we return simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs to clean up their resources and not wait forever for completions upon receiving remove_one. The above change requires an extra check in the data path to make sure that when device is in error state, the simulated CQEs will be returned and no further WQEs will be posted. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Fix entries check in mlx5_ib_resize_cqNoa Osherovich2016-06-071-2/+7
| | | | | | | | | | | Verify that number of entries is less than device capability. Add an appropriate warning message for error flow. Fixes: bde51583f49b ('IB/mlx5: Add support for resize CQ') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Fix entries checks in mlx5_ib_create_cqNoa Osherovich2016-06-071-1/+2
| | | | | | | | | | | | | Number of entries shouldn't be greater than the device's max capability. This should be checked before rounding the entries number to power of two. Fixes: 51ee86a4af639 ('IB/mlx5: Fix check of number of entries...') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Fire the CQ completion handler from taskletMatan Barak2016-05-181-1/+4
| | | | | | | | | | | Previously, mlx5_ib_cq_comp was executed from interrupt context. Under heavy load, this could cause the CPU core to be in an interrupt context too long. Instead of executing the handler from the interrupt context we execute it from a much friendly tasklet context. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* net/mlx5: Refactor mlx5_core_mr to mkeyMatan Barak2016-03-011-8/+8
| | | | | | | | | | | Mlx5's mkey mechanism is also used for memory windows. The current code base uses MR (memory region) naming, which is inaccurate. Changing MR to mkey in order to represent its different usages more accurately. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Generate completions in softwareHaggai Eran2016-03-011-5/+78
| | | | | | | | | | | | | | | The GSI QP emulation requires also emulating completions for transmitted MADs. The CQ on which these completions are generated can also be used by the hardware, and the MAD layer is free to use any CQ of the device for the GSI QP. Add a method for generating software completions to each mlx5 CQ. Software completions are polled first, and generate calls to the completion handler callback if necessary. Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Add support for CSUM in RX flowErez Shitrit2016-03-011-1/+4
| | | | | | | | | | | The driver checks the csum from the HW when completion arrived and marks it in the wc->wc_flags field for the ulp drivers. These is for packets from type IB_WC_RECV only. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* Merge tag 'for-linus' of ↵Linus Torvalds2016-01-231-6/+25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "Initial roundup of 4.5 merge window patches - Remove usage of ib_query_device and instead store attributes in ib_device struct - Move iopoll out of block and into lib, rename to irqpoll, and use in several places in the rdma stack as our new completion queue polling library mechanism. Update the other block drivers that already used iopoll to use the new mechanism too. - Replace the per-entry GID table locks with a single GID table lock - IPoIB multicast cleanup - Cleanups to the IB MR facility - Add support for 64bit extended IB counters - Fix for netlink oops while parsing RDMA nl messages - RoCEv2 support for the core IB code - mlx4 RoCEv2 support - mlx5 RoCEv2 support - Cross Channel support for mlx5 - Timestamp support for mlx5 - Atomic support for mlx5 - Raw QP support for mlx5 - MAINTAINERS update for mlx4/mlx5 - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates - Add support for remote invalidate to the iSER driver (pushed through the RDMA tree due to dependencies, acknowledged by nab) - Update to NFSoRDMA (pushed through the RDMA tree due to dependencies, acknowledged by Bruce)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits) IB/mlx5: Unify CQ create flags check IB/mlx5: Expose Raw Packet QP to user space consumers {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib IB/mlx5: Support setting Ethernet priority for Raw Packet QPs IB/mlx5: Add Raw Packet QP query functionality IB/mlx5: Add create and destroy functionality for Raw Packet QP IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types IB/mlx5: Allocate a Transport Domain for each ucontext net/mlx5_core: Warn on unsupported events of QP/RQ/SQ net/mlx5_core: Add RQ and SQ event handling net/mlx5_core: Export transport objects IB/mlx5: Expose CQE version to user-space IB/mlx5: Add CQE version 1 support to user QPs and SRQs IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext IB/sa: Fix netlink local service GFP crash IB/srpt: Remove redundant wc array IB/qib: Improve ipoib UD performance IB/mlx4: Advertise RoCE v2 support IB/mlx4: Create and use another QP1 for RoCEv2 IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers ...
| * IB/mlx5: Unify CQ create flags checkLeon Romanovsky2016-01-211-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The create_cq() can receive creation flags which were used differently by two commits which added create_cq extended command and cross-channel. The merged code caused to not accept any flags at all. This patch unifies the check into one function and one return error code. Fixes: 972ecb821379 ("IB/mlx5: Add create_cq extended command") Fixes: 051f263098a9 ("IB/mlx5: Add driver cross-channel support") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * IB/mlx5: Add driver cross-channel supportLeon Romanovsky2015-12-231-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of cross-channel functionality to mlx5 driver. This includes ability to ignore overrun for CQ which intended for cross-channel, export device capability and configure the QP to be sync master/slave queues. The cross-channel enabled QP supports combination of three possible properties: * WQE processing on the receive queue of this QP * WQE processing on the send queue of this QP * WQE are supported on the send queue Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * IB/mlx5: Add create_cq extended commandMatan Barak2015-12-231-0/+7
| | | | | | | | | | | | | | | | | | In order to create a CQ that supports timestamp, mlx5 needs to support the extended create CQ command with the timestamp flag. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * IB: remove in-kernel support for memory windowsChristoph Hellwig2015-12-231-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | Remove the unused ib_allow_mw and ib_bind_mw functions, remove the unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw into the uverbs module. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * IB/mlx5: Set network_hdr_type upon RoCE responder completionAchiad Shochat2015-12-231-0/+17
| | | | | | | | | | | | | | | | | | When handling a responder completion, if the link layer is Ethernet, set the work completion network_hdr_type field according to CQE's info and the IB_WC_WITH_NETWORK_HDR_TYPE flag. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | net/mlx5_core: Fix trimming down IRQ numberDoron Tsur2016-01-171-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | With several ConnectX-4 cards installed on a server, one may receive irqn > 255 from the kernel API, which we mistakenly trim to 8bit. This causes EQ creation failure with the following stack trace: [<ffffffff812a11f4>] dump_stack+0x48/0x64 [<ffffffff810ace21>] __setup_irq+0x3a1/0x4f0 [<ffffffff810ad7e0>] request_threaded_irq+0x120/0x180 [<ffffffffa0923660>] ? mlx5_eq_int+0x450/0x450 [mlx5_core] [<ffffffffa0922f64>] mlx5_create_map_eq+0x1e4/0x2b0 [mlx5_core] [<ffffffffa091de01>] alloc_comp_eqs+0xb1/0x180 [mlx5_core] [<ffffffffa091ea99>] mlx5_dev_init+0x5e9/0x6e0 [mlx5_core] [<ffffffffa091ec29>] init_one+0x99/0x1c0 [mlx5_core] [<ffffffff812e2afc>] local_pci_probe+0x4c/0xa0 Fixing it by changing of the irqn type from u8 to unsigned int to support values > 255 Fixes: 61d0e73e0a5a ('net/mlx5_core: Use the the real irqn in eq->irqn') Reported-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IB/mlx5: Remove old FRWR API supportSagi Grimberg2015-10-281-3/+0
| | | | | | | | | No ULP uses it anymore, go ahead and remove it. Keep only the local invalidate part of the handlers. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Support the new memory registration APISagi Grimberg2015-10-281-0/+3
| | | | | | | | | | | | | | | | | | Support the new memory registration API by allocating a private page list array in mlx5_ib_mr and populate it when mlx5_ib_map_mr_sg is invoked. Also, support IB_WR_REG_MR by setting the exact WQE as IB_WR_FAST_REG_MR, just take the needed information from different places: - page_size, iova, length, access flags (ib_mr) - page array (mlx5_ib_mr) - key (ib_reg_wr) The IB_WR_FAST_REG_MR handlers will be removed later when all the ULPs will be converted. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
* mlx5: Fix incorrect wc pkey_index assignment for GSI messagesSagi Grimberg2015-09-031-1/+9
| | | | | | | | | | | | | | | | Since patch series "Demux IB CM requests in the rdma_cm module" the P_Key index is taken from the work completion rather than the message itself. The HCA provides us with the message P_Key. In order to provide the P_Key index, we need to look it up. Given that this is relevant only for GSI messages (session establishments) which is less performance critical, micro-optimize against the GSI (is_qp1) branch. Fixes: 4c21b5bcef73 ("IB/cma: Add net_dev and private data checks to RDMA CM") Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2015-06-241-6/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
| * net/mlx5_core: New device capabilities handlingSaeed Mahameed2015-05-301-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Query all supported types of dev caps on driver load. - Store the Cap data outbox per cap type into driver private data. - Introduce new Macros to access/dump stored caps (using the auto generated data types). - Obsolete SW representation of dev caps (no need for SW copy for each cap). - Modify IB driver to use new macros for checking caps. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx5_core,mlx5_ib: Do not use vmap() on coherent memoryAmir Vadai2015-05-301-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As David Daney pointed in mlx4_core driver [1], mlx5_core is also misusing the DMA-API. This patch is removing the code that vmap() memory allocated by dma_alloc_coherent(). After this patch, users of this drivers might fail allocating resources on memory fragmeneted systems. This will be fixed later on. [1] - https://patchwork.ozlabs.org/patch/458531/ CC: David Daney <david.daney@cavium.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | IB/core: Change provider's API of create_cq to be extendibleMatan Barak2015-06-121-2/+8
|/ | | | | | | | | | | | | | | Add a new ib_cq_init_attr structure which contains the previous cqe (minimum number of CQ entries) and comp_vector (completion vector) in addition to a new flags field. All vendors' create_cq callbacks are changed in order to work with the new API. This commit does not change any functionality. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> to patch #2 Signed-off-by: Doug Ledford <dledford@redhat.com>
* net/mlx5_core: Modify arm CQ in preparation for upcoming Ethernet driverSaeed Mahameed2015-04-021-2/+6
| | | | | | | | Pass consumer index as a parameter to arm CQ Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5_core: Move completion eqs from mlx5_ib to mlx5_coreSaeed Mahameed2015-04-021-1/+1
| | | | | | | | | | Preparation for ethernet driver. These functions will be used in drivers other than mlx5_ib. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IB/mlx5: Fix Mellanox copyright noteSaeed Mahameed2015-04-021-1/+1
| | | | | | | Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5_core: Clear doorbell record inside mlx5_db_alloc()Saeed Mahameed2015-04-021-2/+0
| | | | | | | | | Do it in one place instead of every where the function is invoked Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx5: don't duplicate kvfree()Al Viro2014-11-211-4/+4
| | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx5_core: Update device capabilities handlingEli Cohen2014-10-031-4/+4
| | | | | | | | | | Rearrange struct mlx5_caps so it has a "gen" field to represent the current capabilities configured for the device. Max capabilities can also be queried from the device. Also update capabilities struct to contain more fields as per the latest revision if firmware specification. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx5: minor fixes (mainly avoidance of hidden casts)Jack Morgenstein2014-07-301-1/+1
| | | | | | | | | | | | There were many places where parameters which should be u8/u16 were integer type. Additionally, in 2 places, a check for a non-null pointer was added before dereferencing the pointer (this is actually a bug fix). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx5: Move pci device handling from mlx5_ib to mlx5_coreJack Morgenstein2014-07-301-23/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for a new mlx5 device which is VPI (i.e., ports can be either IB or ETH), move the pci device functionality from mlx5_ib to mlx5_core. This involves the following changes: 1. Move mlx5_core_dev struct out of mlx5_ib_dev. mlx5_core_dev is now an independent structure maintained by mlx5_core. mlx5_ib_dev now has a pointer to that struct. This requires changing a lot of places where the core_dev struct was accessed via mlx5_ib_dev (now, this needs to be a pointer dereference). 2. All PCI initializations are now done in mlx5_core. Thus, it is now mlx5_core which does pci_register_device (and not mlx5_ib, as was previously). 3. mlx5_ib now registers itself with mlx5_core as an "interface" driver. This is very similar to the mechanism employed for the mlx4 (ConnectX) driver. Once the HCA is initialized (by mlx5_core), it invokes the interface drivers to do their initializations. 4. There is a new event handler which the core registers: mlx5_core_event(). This event handler invokes the event handlers registered by the interfaces. Based on a patch by Eli Cohen <eli@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IB/mlx5: add missing padding at end of struct mlx5_ib_create_cqYann Droneaud2014-05-271-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i386 ABI disagrees with most other ABIs regarding alignment of data type larger than 4 bytes: on most ABIs a padding must be added at end of the structures, while it is not required on i386. So for most ABI struct mlx5_ib_create_cq get padded to be aligned on a 8 bytes multiple, while for i386, such padding is not added. The tool pahole can be used to find such implicit padding: $ pahole --anon_include \ --nested_anon_include \ --recursive \ --class_name mlx5_ib_create_cq \ drivers/infiniband/hw/mlx5/mlx5_ib.o Then, structure layout can be compared between i386 and x86_64: +++ obj-i386/drivers/infiniband/hw/mlx5/mlx5_ib.o.pahole.txt 2014-03-28 11:43:07.386413682 +0100 --- obj-x86_64/drivers/infiniband/hw/mlx5/mlx5_ib.o.pahole.txt 2014-03-27 13:06:17.788472721 +0100 @@ -34,9 +34,8 @@ struct mlx5_ib_create_cq { __u64 db_addr; /* 8 8 */ __u32 cqe_size; /* 16 4 */ - /* size: 20, cachelines: 1, members: 3 */ - /* last cacheline: 20 bytes */ + /* size: 24, cachelines: 1, members: 3 */ + /* padding: 4 */ + /* last cacheline: 24 bytes */ }; This ABI disagreement will make an x86_64 kernel try to read past the buffer provided by an i386 binary. When boundary check will be implemented, a x86_64 kernel will refuse to read past the i386 userspace provided buffer and the uverb will fail. Anyway, if the structure lies in memory on a page boundary and next page is not mapped, ib_copy_from_udata() will fail when trying to read the 4 bytes of padding and the uverb will fail. This patch makes create_cq_user() takes care of the input data size to handle the case where no padding is provided. This way, x86_64 kernel will be able to handle struct mlx5_ib_create_cq as sent by unpatched and patched i386 libmlx5. Link: http://marc.info/?i=cover.1399309513.git.ydroneaud@opteya.com Cc: <stable@vger.kernel.org> Fixes: e126ba97dba9e ("mlx5: Add driver for Mellanox Connect-IB adapter") Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx5: Collect signature error completionSagi Grimberg2014-03-071-0/+62
| | | | | | | | | | | | | | | | | | | This commit takes care of the generated signature error CQE generated by the HW (if happened). The underlying mlx5 driver will handle signature error completions and will mark the relevant memory region as dirty. Once the consumer gets the completion for the transaction, it must check for signature errors on signature memory region using a new lightweight verb ib_check_mr_status(). In case the user doesn't check for signature error (i.e. doesn't call ib_check_mr_status() with status check IB_MR_CHECK_SIG_STATUS), the memory region cannot be used for another signature operation (REG_SIG_MR work request will fail). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx5: Verify reserved fields are clearedEli Cohen2014-01-221-2/+6
| | | | | | | | | | Verify that reserved fields in struct mlx5_ib_resize_cq are cleared before continuing execution of the verb. This is required to allow making use of this area in future revisions. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx5: Add support for resize CQEli Cohen2014-01-221-17/+265
| | | | | | | Implement resize CQ which is a mandatory verb in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx5: Implement modify CQEli Cohen2014-01-221-1/+25
| | | | | | | | Modify CQ is used by ULPs like IPoIB to change moderation parameters. This patch adds support in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
OpenPOWER on IntegriCloud