summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/mlx4/qp.c
Commit message (Collapse)AuthorAgeFilesLines
* IB/mlx4: Replace mechanism for RoCE GID managementMoni Shoua2015-08-301-3/+7
| | | | | | | | | | | Manage RoCE gid table with logic in IB/core, which is common to all vendors, and remove the mechanism from the mlx4 IB driver. Since management of the GID cache may lead to index mismatch with the hardware GID table, a translation between indexes is required when modifying a QP or creating an address handle. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx4: Add RoCE/IB dedicated countersEran Ben Elisha2015-06-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | This is an infrastructure step to attach all the QPs opened from the IB driver to a counter in order to collect VF stats from the PF using those counters. If the port's type is Ethernet, the counter policy demands two counters per port (one for RoCE and one for Ethernet). The port default counter (allocated in mlx4_core) is used for the Ethernet netdev QPs and we allocate another counter for RoCE. If the port's traffic is Infiniband, the counter policy demands one counter per port, so it can use the port's default counter. Also, Add 'allocated' flag for each counter in order to clean it at unload. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Add sink counterEran Ben Elisha2015-06-151-1/+2
| | | | | | | | | | | | | | | | Reserve the last valid counter index for "sink" counter, when a new counter cannot be allocated, the driver will use this counter. In order to avoid allocating this counter on any other flow, fix the indices bitmap allocation range, and reserve the sink counter index. Add macro for the sink counter index and replace all appearences of the index with the macro. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
*-. Merge branches 'cve-fixup', 'ipoib', 'iser', 'misc-4.1', 'or-mlx4' and 'srp' ↵Doug Ledford2015-04-151-2/+5
|\ \ | | | | | | | | | into for-4.1
| | * infiniband/mlx4: check for mapping errorSebastian Ott2015-04-151-0/+4
| |/ |/| | | | | | | | | | | | | | | Since ib_dma_map_single can fail use ib_dma_mapping_error to check for errors. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * IB/mlx4: Fix WQE LSO segment calculationErez Shitrit2015-04-151-2/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | The current code decreases from the mss size (which is the gso_size from the kernel skb) the size of the packet headers. It shouldn't do that because the mss that comes from the stack (e.g IPoIB) includes only the tcp payload without the headers. The result is indication to the HW that each packet that the HW sends is smaller than what it could be, and too many packets will be sent for big messages. An easy way to demonstrate one more aspect of the problem is by configuring the ipoib mtu to be less than 2*hlen (2*56) and then run app sending big TCP messages. This will tell the HW to send packets with giant (negative value which under unsigned arithmetics becomes a huge positive one) length and the QP moves to SQE state. Fixes: b832be1e4007 ('IB/mlx4: Add IPoIB LSO support') Reported-by: Matthew Finlay <matt@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* Merge tag 'rdma-for-linus' of ↵Linus Torvalds2015-02-211-2/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA updates from Roland Dreier: - Re-enable on-demand paging changes with stable ABI - Fairly large set of ocrdma HW driver fixes - Some qib HW driver fixes - Other miscellaneous changes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (43 commits) IB/qib: Add blank line after declaration IB/qib: Fix checkpatch warnings IB/mlx5: Enable the ODP capability query verb IB/core: Add on demand paging caps to ib_uverbs_ex_query_device IB/core: Add support for extended query device caps RDMA/cxgb4: Don't hang threads forever waiting on WR replies RDMA/ocrdma: Fix off by one in ocrdma_query_gid() RDMA/ocrdma: Use unsigned for bit index RDMA/ocrdma: Help gcc generate better code for ocrdma_srq_toggle_bit RDMA/ocrdma: Update the ocrdma module version string RDMA/ocrdma: set vlan present bit for user AH RDMA/ocrdma: remove reference of ocrdma_dev out of ocrdma_qp structure RDMA/ocrdma: Add support for interrupt moderation RDMA/ocrdma: Honor return value of ocrdma_resolve_dmac RDMA/ocrdma: Allow expansion of the SQ CQEs via buddy CQ expansion of the QP RDMA/ocrdma: Discontinue support of RDMA-READ-WITH-INVALIDATE RDMA/ocrdma: Host crash on destroying device resources RDMA/ocrdma: Report correct state in ibv_query_qp RDMA/ocrdma: Debugfs enhancments for ocrdma driver RDMA/ocrdma: Report correct count of interrupt vectors while registering ocrdma device ...
| * IB/mlx4: Fix memory leak in __mlx4_ib_modify_qpMajd Dibbiny2015-02-171-2/+4
| | | | | | | | | | | | | | | | | | In case handle_eth_ud_smac_index fails, we need to free the allocated resources. Fixes: 2f5bb473681b ("mlx4: Add ref counting to port MAC table for RoCE") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | IB/mlx4: Reset flow support for IB kernel ULPsYishai Hadas2015-02-091-6/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver exposes interfaces that directly relate to HW state. Upon fatal error, consumers of these interfaces (ULPs) that rely on completion of all their posted work-request could hang, thereby introducing dependencies in shutdown order. To prevent this from happening, we manage the relevant resources (CQs, QPs) that are used by the device. Upon a fatal error, we now generate simulated completions for outstanding WQEs that were not completed at the time the HW was reset. It includes invoking the completion event handler for all involved CQs so that the ULPs will poll those CQs. When polled we return simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs to clean up their resources and not wait forever for completions upon receiving remove_one. The above change requires an extra check in the data path to make sure that when device is in error state, the simulated CQEs will be returned and no further WQEs will be posted. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | IB/mlx4: Load balance ports in port aggregation modeMoni Shoua2015-02-041-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | When the mlx4 IB (RoCE) device works in link aggregation mode, it exposes a single port to upper layers. Therefore, applications always set '1' in port_num attribute when modifying a QP or creating an address handle. To make sure that a node uses all available ports the mlx4 driver will override the port_num attribute with a round robin policy. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | IB/mlx4: Reuse mlx4_mac_to_u64()Moni Shoua2015-02-041-11/+1
|/ | | | | | | | This function is implemented twice... get rid of one copy. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: Add A0 hybrid steeringMatan Barak2014-12-111-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A0 hybrid steering is a form of high performance flow steering. By using this mode, mlx4 cards use a fast limited table based steering, in order to enable fast steering of unicast packets to a QP. In order to implement A0 hybrid steering we allocate resources from different zones: (1) General range (2) Special MAC-assigned QPs [RSS, Raw-Ethernet] each has its own region. When we create a rss QP or a raw ethernet (A0 steerable and BF ready) QP, we try hard to allocate the QP from range (2). Otherwise, we try hard not to allocate from this range. However, when the system is pushed to its limits and one needs every resource, the allocator uses every region it can. Meaning, when we run out of raw-eth qps, the allocator allocates from the general range (and the special-A0 area is no longer active). If we run out of RSS qps, the mechanism tries to allocate from the raw-eth QP zone. If that is also exhausted, the allocator will allocate from the general range (and the A0 region is no longer active). Note that if a raw-eth qp is allocated from the general range, it attempts to allocate the range such that bits 6 and 7 (blueflame bits) in the QP number are not set. When the feature is used in SRIOV, the VF has to notify the PF what kind of QP attributes it needs. In order to do that, along with the "Eth QP blueflame" bit, we reserve a new "A0 steerable QP". According to the combination of these bits, the PF tries to allocate a suitable QP. In order to maintain backward compatibility (with older PFs), the PF notifies which QP attributes it supports via QUERY_FUNC_CAP command. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: Change QP allocation schemeEugenia Emantayev2014-12-111-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using BF (Blue-Flame), the QPN overrides the VLAN, CV, and SV fields in the WQE. Thus, BF may only be used for QPNs with bits 6,7 unset. The current Ethernet driver code reserves a Tx QP range with 256b alignment. This is wrong because if there are more than 64 Tx QPs in use, QPNs >= base + 65 will have bits 6/7 set. This problem is not specific for the Ethernet driver, any entity that tries to reserve more than 64 BF-enabled QPs should fail. Also, using ranges is not necessary here and is wasteful. The new mechanism introduced here will support reservation for "Eth QPs eligible for BF" for all drivers: bare-metal, multi-PF, and VFs (when hypervisors support WC in VMs). The flow we use is: 1. In mlx4_en, allocate Tx QPs one by one instead of a range allocation, and request "BF enabled QPs" if BF is supported for the function 2. In the ALLOC_RES FW command, change param1 to: a. param1[23:0] - number of QPs b. param1[31-24] - flags controlling QPs reservation Bit 31 refers to Eth blueflame supported QPs. Those QPs must have bits 6 and 7 unset in order to be used in Ethernet. Bits 24-30 of the flags are currently reserved. When a function tries to allocate a QP, it states the required attributes for this QP. Those attributes are considered "best-effort". If an attribute, such as Ethernet BF enabled QP, is a must-have attribute, the function has to check that attribute is supported before trying to do the allocation. In a lower layer of the code, mlx4_qp_reserve_range masks out the bits which are unsupported. If SRIOV is used, the PF validates those attributes and masks out unsupported attributes as well. In order to notify VFs which attributes are supported, the VF uses QUERY_FUNC_CAP command. This command's mailbox is filled by the PF, which notifies which QP allocation attributes it supports. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'rdma-for-linus' of ↵Linus Torvalds2014-09-231-22/+38
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: "Last late set of InfiniBand/RDMA fixes for 3.17: - fixes for the new memory region re-registration support - iSER initiator error path fixes - grab bag of small fixes for the qib and ocrdma hardware drivers - larger set of fixes for mlx4, especially in RoCE mode" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits) IB/mlx4: Fix VF mac handling in RoCE IB/mlx4: Do not allow APM under RoCE IB/mlx4: Don't update QP1 in native mode IB/mlx4: Avoid accessing netdevice when building RoCE qp1 header mlx4: Fix mlx4 reg/unreg mac to work properly with 0-mac addresses IB/core: When marshaling uverbs path, clear unused fields IB/mlx4: Avoid executing gid task when device is being removed IB/mlx4: Fix lockdep splat for the iboe lock IB/mlx4: Get upper dev addresses as RoCE GIDs when port comes up IB/mlx4: Reorder steps in RoCE GID table initialization IB/mlx4: Don't duplicate the default RoCE GID IB/mlx4: Avoid null pointer dereference in mlx4_ib_scan_netdevs() IB/iser: Bump version to 1.4.1 IB/iser: Allow bind only when connection state is UP IB/iser: Fix RX/TX CQ resource leak on error flow RDMA/ocrdma: Use right macro in query AH RDMA/ocrdma: Resolve L2 address when creating user AH mlx4: Correct error flows in rereg_mr IB/qib: Correct reference counting in debugfs qp_stats IPoIB: Remove unnecessary port query ...
| * IB/mlx4: Fix VF mac handling in RoCEJack Morgenstein2014-09-221-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We had several problems here. First, a race condition on QP1 mac handling between mlx4_ib_update_qps and mlx4_ib_modify_qp, which is fixed by taking the qp mutex in mlx4_ib_update_qps. Also, qp->pri.smac_port was not updated in mlx4_ib_update_qps. Last, in __mlx4_ib_modify_qp we did not properly handle the case where the mac is zero, but port is non-zero. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| * IB/mlx4: Do not allow APM under RoCEJack Morgenstein2014-09-221-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Automatic Path Migration is not supported under RoCE. Therefore, return a "not-supported" error if the caller attempts to set an alternate path in a QP context. In addition, if there are no IB ports configured, do not report APM capability in the device flags returned by mlx4_ib_query_device. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| * IB/mlx4: Avoid accessing netdevice when building RoCE qp1 headerJack Morgenstein2014-09-221-16/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The source MAC is needed in RoCE when building the QP1 header. Currently, this is obtained from the source net device. However, the net device may not yet exist, or can be destroyed in parallel to this QP1 send operation (e.g through the VPI port change flow) so accessing it may cause a kernel crash. To fix this, we maintain a source MAC cache per port for the net device in struct mlx4_ib_roce. This cached MAC is initialized to be the default MAC address obtained during HCA initialization via QUERY_PORT. This cached MAC is updated via the netdev event notifier handler. Since the cached MAC is held in an atomic64 object, we do not need locking when accessing it. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | mlx4: Fix wrong endianess access with QP context flagsOr Gerlitz2014-09-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | We wrongly tested QP context bits without BE conversion as was spotted by sparse... drivers/infiniband/hw/mlx4/qp.c:1685:38: sparse: restricted __be32 degrades to integer Fix that! Fixes: d2fce8a ('mlx4: Set user-space raw Ethernet QPs to properly handle VXLAN traffic') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlx4: Set user-space raw Ethernet QPs to properly handle VXLAN trafficOr Gerlitz2014-08-291-1/+7
|/ | | | | | | | | | | Raw Ethernet QPs opened from user-space lack the proper setup to recieve/handle VXLAN traffic when VXLAN offloads are enabled. Fix that by adding a tunnel steering rule on top of the normal unicast steering rule and set the tunnel_type field in the QP context. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'rdma-for-linus' of ↵Linus Torvalds2014-06-101-35/+67
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull main InfiniBand/RDMA updates from Roland Dreier: - add iWARP port mapper to avoid conflicts between RDMA and normal stack TCP connections. - fixes for i386 / x86-64 structure padding differences (ABI compatibility for 32-on-64) from Yann Droneaud. - a pile of SRP initiator fixes from Bart Van Assche. - fixes for a writeback / memory allocation deadlock with NFS over IPoIB connected mode from Jiri Kosina. - the usual fixes and cleanups to mlx4, mlx5, cxgb4 and other low-level drivers. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (61 commits) RDMA/cxgb4: Add support for iWARP Port Mapper user space service RDMA/nes: Add support for iWARP Port Mapper user space service RDMA/core: Add support for iWARP Port Mapper user space service IB/mlx4: Fix gfp passing in create_qp_common() IB/umad: Fix use-after-free on close IB/core: Fix kobject leak on device register error flow RDMA/cxgb4: add missing padding at end of struct c4iw_alloc_ucontext_resp mlx4_core: Fix GFP flags parameters to be gfp_t IB/core: Fix port kobject deletion during error flow IB/core: Remove unneeded kobject_get/put calls IB/core: Fix sparse warnings about redeclared functions IB/mad: Fix sparse warning about gfp_t use IB/mlx4: Implement IB_QP_CREATE_USE_GFP_NOIO IB: Add a QP creation flag to use GFP_NOIO allocations IB: Return error for unsupported QP creation flags IB: Allow build of hw/ and ulp/ subdirectories independently mlx4_core: Move handling of MLX4_QP_ST_MLX to proper switch statement RDMA/cxgb4: Add missing padding at end of struct c4iw_create_cq_resp IB/srp: Avoid problems if a header uses pr_fmt IB/umad: Fix error handling ...
| *-. Merge branches 'core', 'cxgb3', 'cxgb4', 'iser', 'iwpm', 'misc', 'mlx4', ↵Roland Dreier2014-06-101-35/+67
| |\ \ | | | | | | | | | | | | 'mlx5', 'noio', 'ocrdma', 'qib', 'srp' and 'usnic' into for-next
| | | * IB/mlx4: Fix gfp passing in create_qp_common()Jiri Kosina2014-06-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two kzalloc() calls which were not converted to use value of gfp passed to create_qp_common() instead of using hardcoded GFP_KERNEL in 40f2287bd583 ("IB/mlx4: Implement IB_QP_CREATE_USE_GFP_NOIO"). Fix this by passing gfp value down properly. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | | * IB/mlx4: Implement IB_QP_CREATE_USE_GFP_NOIOJiri Kosina2014-06-021-13/+17
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the various routines used to allocate memory resources which serve QPs in mlx4 to get an input GFP directive. Have the Ethernet driver to use GFP_KERNEL in it's QP allocations as done prior to this commit, and the IB driver to use GFP_NOIO when the IB verbs IB_QP_CREATE_USE_GFP_NOIO QP creation flag is provided. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | * mlx4: Add infrastructure for selecting VFs to enable QP0 via MLX proxy QPsJack Morgenstein2014-05-291-12/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds the infrastructure for enabling selected VFs to operate SMI (QP0) MADs without restriction. Additionally, for these enabled VFs, their QP0 proxy and tunnel QPs are MLX QPs. As such, they operate over VL15. Therefore, they are not affected by "credit" problems or changes in the VLArb table (which may shut down VL0). Non-enabled VFs may only create UD proxy QP0 qps (which are forced by the hypervisor to send packets using the q-key it assigns and places in the qp-context). Thus, non-enabled VFs will not pose a security risk. The hypervisor discards any privileged MADs it receives from these non-enabled VFs. By default, all VFs are NOT enabled, and must explicitly be enabled by the administrator. The sysfs interface which operates the VF enablement infrastructure is provided in the next commit. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | * IB/mlx4: Preparation for VFs to issue/receive SMI (QP0) requests/responsesJack Morgenstein2014-05-291-8/+8
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, VFs in SRIOV VFs are denied QP0 access. The main reason for this decision is security, since Subnet Management Datagrams (SMPs) are not restricted by network partitioning and may affect the physical network topology. Moreover, even the SM may be denied access from portions of the network by setting management keys unknown to the SM. However, it is desirable to grant SMI access to certain privileged VFs, so that certain network management activities may be conducted within virtual machines instead of the hypervisor. This commit does the following: 1. Create QP0 tunnel QPs for all VFs. 2. Discard SMI mads sent-from/received-for non-privileged VFs in the hypervisor MAD multiplex/demultiplex logic. SMI mads from/for privileged VFs are allowed to pass. 3. MAD_IFC wrapper changes/fixes. For non-privileged VFs, only host-view MAD_IFC commands are allowed, and only for SMI LID-Routed GET mads. For privileged VFs, there are no restrictions. This commit does not allow privileged VFs as yet. To determine if a VF is privileged, it calls function mlx4_vf_smi_enabled(). This function returns 0 unconditionally for now. The next two commits allow defining and activating privileged VFs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changesMatan Barak2014-05-161-0/+8
|/ | | | | | | | | | | | | | | | | | | | | | | | When we receive a netdev event indicating a netdev change and/or a netdev address change, we must change the MAC index used by the proxy QP1 (in the QP context), otherwise RoCE CM packets sent by the VF will not carry the same source MAC address as the non-CM packets. We use the UPDATE_QP command to perform this change. In order to avoid modifying a QP context based on netdev event, while the driver attempts to destroy this QP (e.g either the mlx4_ib or ib_mad modules are unloaded), we use mutex locking in both flows. Since the relevant mlx4 proxy GSI QP is created indirectly by the mad module when they create their GSI QP, the mlx4 didn't need to keep track on that QP prior to this change. Now, when QP modifications are needed to this QP from within the driver, we added refernece to it. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'rdma-for-linus' of ↵Linus Torvalds2014-04-031-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.15: - The biggest change is core API extensions and mlx5 low-level driver support for handling DIF/DIX-style protection information, and the addition of PI support to the iSER initiator. Target support will be arriving shortly through the SCSI target tree. - A nice simplification to the "umem" memory pinning library now that we have chained sg lists. Kudos to Yishai Hadas for realizing our code didn't have to be so crazy. - Another nice simplification to the sg wrappers used by qib, ipath and ehca to handle their mapping of memory to adapter. - The usual batch of fixes to bugs found by static checkers etc. from intrepid people like Dan Carpenter and Yann Droneaud. - A large batch of cxgb4, ocrdma, qib driver updates" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (102 commits) RDMA/ocrdma: Unregister inet notifier when unloading ocrdma RDMA/ocrdma: Fix warnings about pointer <-> integer casts RDMA/ocrdma: Code clean-up RDMA/ocrdma: Display FW version RDMA/ocrdma: Query controller information RDMA/ocrdma: Support non-embedded mailbox commands RDMA/ocrdma: Handle CQ overrun error RDMA/ocrdma: Display proper value for max_mw RDMA/ocrdma: Use non-zero tag in SRQ posting RDMA/ocrdma: Memory leak fix in ocrdma_dereg_mr() RDMA/ocrdma: Increment abi version count RDMA/ocrdma: Update version string be2net: Add abi version between be2net and ocrdma RDMA/ocrdma: ABI versioning between ocrdma and be2net RDMA/ocrdma: Allow DPP QP creation RDMA/ocrdma: Read ASIC_ID register to select asic_gen RDMA/ocrdma: SQ and RQ doorbell offset clean up RDMA/ocrdma: EQ full catastrophe avoidance RDMA/cxgb4: Disable DSGL use by default RDMA/cxgb4: rx_data() needs to hold the ep mutex ...
| * IB/mlx4: Fix a sparse endianness warningBart Van Assche2014-03-171-1/+1
| | | | | | | | | | | | | | | | | | | | Fix the following warning for the mlx4 driver: $ make M=drivers/infiniband C=2 CF=-D__CHECK_ENDIAN__ drivers/infiniband/hw/mlx4/qp.c:1885:31: warning: restricted __be16 degrades to integer Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | mlx4: Implement IP based gids support for RoCE/SRIOVJack Morgenstein2014-03-121-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since there is no connection between the MAC/VLAN and the GID when using IP-based addressing, the proxy QP1 (running on the slave) must pass the source-mac, destination-mac, and vlan_id information separately from the GID. Additionally, the Host must pass the remote source-mac and vlan_id back to the slave, This is achieved as follows: Outgoing MADs: 1. Source MAC: obtained from the CQ completion structure (struct ib_wc, smac field). 2. Destination MAC: obtained from the tunnel header 3. vlan_id: obtained from the tunnel header. Incoming MADs 1. The source (i.e., remote) MAC and vlan_id are passed in the tunnel header to the proxy QP1. VST mode support: For outgoing MADs, the vlan_id obtained from the header is discarded, and the vlan_id specified by the Hypervisor is used instead. For incoming MADs, the incoming vlan_id (in the wc) is discarded, and the "invalid" vlan (0xffff) is substituted when forwarding to the slave. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlx4: Add ref counting to port MAC table for RoCEJack Morgenstein2014-03-121-42/+243
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IB side of RoCE requires the MAC table index of the MAC address used by its QPs. To obtain the real MAC index, the IB side registers the MAC (increasing its ref count, and also returning the real MAC index) during the modify-qp sequence. This protects against the ETH side deleting or modifying that MAC table entry while the QP is active. Note that until the modify-qp command returns success, the MAC and VLAN information only has "candidate" status. If the modify-qp succeeds, the "candidate" info is promoted to the operational MAC/VLAN info for the qp. If the modify fails, the candidate MAC/VLAN is unregistered, and the old qp info is preserved. The patch is a bit complex, because there are multiple qp transitions where the primary-path information may be modified: INIT-to-RTR, and SQD-to-SQD. Similarly for the alternate path information. Therefore the code must handle cases where path information has already been entered into the QP context by previous qp transitions. For the MAC address, the success logic is as follows: 1. If there was no previous MAC, simply move the candidate MAC information to the operational information, and reset the candidate MAC info. 2. If there was a previous MAC, unregister it. Then move the MAC information from candidate to operational, and reset the candidate info (as in 1. above). The MAC address failure logic is the same for all cases: - Unregister the candidate MAC, and reset the candidate MAC info. For Vlan registration, the logic is similar. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlx4: Adjust QP1 multiplexing for RoCE/SRIOVJack Morgenstein2014-03-121-12/+17
|/ | | | | | | | | | | | | | This requires the following modifications: 1. Fix build_mlx4_header to properly fill in the ETH fields 2. Adjust mux and demux QP1 flow to support RoCE. This commit still assumes only one GID per slave for RoCE. The commit enabling multiple GIDs is a subsequent commit, and is done separately because of its complexity. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'ip-roce' into for-nextRoland Dreier2014-01-221-21/+83
|\ | | | | | | | | Conflicts: drivers/infiniband/hw/mlx4/main.c
| * IB/mlx4: Handle Ethernet L2 parameters for IP based GID addressingMoni Shoua2014-01-181-24/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IP based RoCE gids don't store Ethernet L2 parameters, MAC and VLAN. Therefore, we need to extract them from the CQE and place them in struct ib_wc (to be used for cases were they were taken from the gid). Also, when modifying a QP or building address handle, instead of parsing the dgid to get the MAC and VLAN, take them from the address handle attributes. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| * IB/core: Ethernet L2 attributes in verbs/cm structuresMatan Barak2014-01-141-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | IB/mlx4: Add support for steerable IB UD QPsMatan Barak2014-01-141-6/+47
|/ | | | | | | | | | | | | | | This patch adds support for steerable (NETIF) QP creation. When we create the device, we allocate a range of steerable QPs. Afterward when a QP is created with the NETIF flag, it's allocated from this range. Allocation is managed by bitmap allocator. Internal steering rules for those QPs is automatically generated on their creation. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx4: Set link type for RAW PACKET QPs in the QP contextEli Cohen2013-04-241-0/+4
| | | | | | | | | | | When the link type is Ethernet, setting the link type in the QP context will enable TCP/IP stateless offloads (checksum, LSO, RSS) for RAW PACKET Ethernet QPs. For IB UD QPs this worked OK since the value assumed by the firmware for IB link layer is zero. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx4: Disable VLAN stripping for RAW PACKET QPsDotan Barak2013-04-241-0/+2
| | | | | | | | | Fix the asymmetric behavior w.r.t VLAN insertion/stripping for RAW PACKET QPs -- we don't insert on send and need not strip on receive. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx4: Support memory window bindingShani Michaeli2013-02-251-3/+32
| | | | | | | | | | | | | | | * Implement memory windows binding in mlx4_ib_post_send. * Implement mlx4_ib_bind_mw by deferring to mlx4_ib_post_send. * Rename MLX4_WQE_FMR_PERM_* flags to MLX4_WQE_FMR_AND_BIND_PERM_*, indicating that they are used both for fast registration work requests, and for memory window bind work requests. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx4: Fix compiler warning about uninitialized 'vlan' variablePaul Bolle2013-02-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | Building qp.o triggers this gcc warning: drivers/infiniband/hw/mlx4/qp.c: In function ‘mlx4_ib_post_send’: drivers/infiniband/hw/mlx4/qp.c:1862:62: warning: ‘vlan’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/infiniband/hw/mlx4/qp.c:1752:6: note: ‘vlan’ was declared here Looking at the code it is clear 'vlan' is only set and used if 'is_eth' is non-zero. But by initializing 'vlan' to 0xffff, on gcc (Ubuntu 4.7.2-22ubuntu1) 4.7.2 on x86-64 at least, we fix the warning, and the compiler was already setting 'vlan' to 0 in the generated code, so there's no real downside. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> [ Get rid of unnecessary move of 'is_vlan' initialization. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx4: Convert is_xxx variables in build_mlx_header() to boolRoland Dreier2013-02-251-4/+4
| | | | | | | | | | | Matches the way they're used, and actually lets at least x86-64 generate better code: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-38 (-38) function old new delta mlx4_ib_post_send 4416 4378 -38 Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx4_ib: Remove local invalidate segment unused fieldsShani Michaeli2013-02-211-4/+2
| | | | | | | | | Remove unused fields from the local invalidate WQE segment structure. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
*-. Merge branches 'cma', 'cxgb4', 'ipoib', 'mlx4', 'mlx4-sriov', 'nes', 'qib' ↵Roland Dreier2012-10-021-76/+584
|\ \ | | | | | | | | | and 'srp' into for-linus
| | * mlx4: Modify proxy/tunnel QP mechanism so that guests do no calculationsJack Morgenstein2012-09-301-35/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, the structure of a guest's proxy QPs followed the structure of the PPF special qps (qp0 port 1, qp0 port 2, qp1 port 1, qp1 port 2, ...). The guest then did offset calculations on the sqp_base qp number that the PPF passed to it in QUERY_FUNC_CAP(). This is now changed so that the guest does no offset calculations regarding proxy or tunnel QPs to use. This change frees the PPF from needing to adhere to a specific order in allocating proxy and tunnel QPs. Now QUERY_FUNC_CAP provides each port individually with its proxy qp0, proxy qp1, tunnel qp0, and tunnel qp1 QP numbers, and these are used directly where required (with no offset calculations). To accomplish this change, several fields were added to the phys_caps structure for use by the PPF and by non-SR-IOV mode: base_sqpn -- in non-sriov mode, this was formerly sqp_start. base_proxy_sqpn -- the first physical proxy qp number -- used by PPF base_tunnel_sqpn -- the first physical tunnel qp number -- used by PPF. The current code in the PPF still adheres to the previous layout of sqps, proxy-sqps and tunnel-sqps. However, the PPF can change this layout without affecting VF or (paravirtualized) PF code. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | * IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP supportJack Morgenstein2012-09-301-73/+543
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Introduce the basic SR-IOV parvirtualization context objects for multiplexing and demultiplexing MADs. 2. Introduce support for the new proxy and tunnel QP types. This patch introduces the objects required by the master for managing QP paravirtualization for guests. struct mlx4_ib_sriov is created by the master only. It is a container for the following: 1. All the info required by the PPF to multiplex and de-multiplex MADs (including those from the PF). (struct mlx4_ib_demux_ctx demux) 2. All the info required to manage alias GUIDs (i.e., the GUID at index 0 that each guest perceives. In fact, this is not the GUID which is actually at index 0, but is, in fact, the GUID which is at index[<VF number>] in the physical table. 3. structures which are used to manage CM paravirtualization 4. structures for managing the real special QPs when running in SR-IOV mode. The real SQPs are controlled by the PPF in this case. All SQPs created and controlled by the ib core layer are proxy SQP. struct mlx4_ib_demux_ctx contains the information per port needed to manage paravirtualization: 1. All multicast paravirt info 2. All tunnel-qp paravirt info for the port. 3. GUID-table and GUID-prefix for the port 4. work queues. struct mlx4_ib_demux_pv_ctx contains all the info for managing the paravirtualized QPs for one slave/port. struct mlx4_ib_demux_pv_qp contains the info need to run an individual QP (either tunnel qp or real SQP). Note: We made use of the 2 most significant bits in enum mlx4_ib_qp_flags (based on enum ib_qp_create_flags in ib_verbs.h). We need these bits in the low-level driver for internal purposes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
| * IB/mlx4: Fill in sq_sig_type in query QPDotan Barak2012-09-301-0/+4
|/ | | | | | Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/mlx4: Check iboe netdev pointer before dereferencing itKleber Sacilotto de Souza2012-08-161-1/+5
| | | | | | | | | | | | | Unlike other parts of the mlx4_ib code, the function build_mlx_header() doesn't check if the iboe netdev of the given port is valid before dereferencing it, which can cause a crash if the ethernet interface has already been taken down. Fix this by checking for a valid netdev pointer before using it to get the port MAC address. Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* Merge tag 'rdma-for-3.6' of ↵Linus Torvalds2012-07-241-2/+25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA changes from Roland Dreier: - Updates to the qib low-level driver - First chunk of changes for SR-IOV support for mlx4 IB - RDMA CM support for IPv6-only binding - Other misc cleanups and fixes Fix up some add-add conflicts in include/linux/mlx4/device.h and drivers/net/ethernet/mellanox/mlx4/main.c * tag 'rdma-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (30 commits) IB/qib: checkpatch fixes IB/qib: Add congestion control agent implementation IB/qib: Reduce sdma_lock contention IB/qib: Fix an incorrect log message IB/qib: Fix QP RCU sparse warnings mlx4: Put physical GID and P_Key table sizes in mlx4_phys_caps struct and paravirtualize them mlx4_core: Allow guests to have IB ports mlx4_core: Implement mechanism for reserved Q_Keys net/mlx4_core: Free ICM table in case of error IB/cm: Destroy idr as part of the module init error flow mlx4_core: Remove double function declarations IB/mlx4: Fill the masked_atomic_cap attribute in query device IB/mthca: Fill in sq_sig_type in query QP IB/mthca: Warning about event for non-existent QPs should show event type IB/qib: Fix sparse RCU warnings in qib_keys.c net/mlx4_core: Initialize IB port capabilities for all slaves mlx4: Use port management change event instead of smp_snoop IB/qib: RCU locking for MR validation IB/qib: Avoid returning EBUSY from MR deregister IB/qib: Fix UC MR refs for immediate operations ...
| * IB/mlx4: Add debug printsJack Morgenstein2012-07-081-2/+25
| | | | | | | | | | | | | | Define pr_fmt and add some pr_debug prints. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | {NET, IB}/mlx4: Add device managed flow steering firmware APIHadar Hen Zion2012-07-071-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver is modified to support three operation modes. If supported by firmware use the device managed flow steering API, that which we call device managed steering mode. Else, if the firmware supports the B0 steering mode use it, and finally, if none of the above, use the A0 steering mode. When the steering mode is device managed, the code is modified such that L2 based rules set by the mlx4_en driver for Ethernet unicast and multicast, and the IB stack multicast attach calls done through the mlx4_ib driver are all routed to use the device managed API. When attaching rule using device managed flow steering API, the firmware returns a 64 bit registration id, which is to be provided during detach. Currently the firmware is always programmed during HCA initialization to use standard L2 hashing. Future work should be done to allow configuring the flow-steering hash function with common, non proprietary means. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IB/mlx4: Fix max_wqe capacity reported from query deviceSagi Grimberg2012-06-061-6/+15
| | | | | | | | | | | | | | | | | | 1. Limit the max number of WQEs per QP reported when querying the device, so that ib_create_qp() will not fail for a QP size that the device claimed to support due to additional headroom WQEs being allocated. 2. Limit qp resources accepted for ib_create_qp() to the limits reported in ib_query_device(). In kernel space, make sure that the limits returned to the caller following qp creation also lie within the reported device limits. For userspace, report as before, and do adjustment in libmlx4 (so as not to break ABI). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Sagi Grimberg <sagig@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
OpenPOWER on IntegriCloud