summaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc
Commit message (Collapse)AuthorAgeFilesLines
* iio: adc: Add support for STM32 ADCFabrice Gasnier2016-11-193-0/+529
| | | | | | | | This patch adds support for STMicroelectronics STM32 MCU's analog to digital converter. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: adc: Add support for STM32 ADC coreFabrice Gasnier2016-11-194-0/+368
| | | | | | | | | | | Add core driver for STMicroelectronics STM32 ADC (Analog to Digital Converter). STM32 ADC can be composed of up to 3 ADCs with shared resources like clock prescaler, common interrupt line and analog reference voltage. This core driver basically manages shared resources. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: envelope-detector: ADC driver based on a DAC and a comparatorPeter Rosin2016-11-133-0/+433
| | | | | | | | | | | | | | | | | | | | | | | The DAC is used to find the peak level of an alternating voltage input signal by a binary search using the output of a comparator wired to an interrupt pin. Like so: _ | \ input +------>-------|+ \ | \ .-------. | }---. | | | / | | dac|-->--|- / | | | |_/ | | | | | | | | irq|------<-------' | | '-------' Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio:adc: ad7766: testing the wrong variable in probeDan Carpenter2016-11-121-2/+2
| | | | | | | | | We should be testing "ret" here. Fixes: aa16c6bd0e09 ("iio:adc: Add support for AD7766/AD7767") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge tag 'iio-for-4.10b' of ↵Greg Kroah-Hartman2016-11-072-3/+173
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle This includes two branch merges for elements that may also go via MFD. New device support * cros_ec - new driver to support these Chrome OS contiguous sensors which are behind the Chrome OS embedded controller. Requires a few minor MFD and chrome platform changes. One follow up fix deals with some dependency issues in Kconfig. * mpu-3050 - new driver and device tree bindings for this venerable device. * st_accel - support for the lng2dm an Driver features * ad7192 - Add DVdd regulator handling * ad9832 - Add DVDD regulator handling * at91 - Suspend and resume support * si7020 - Device tree bindings * ti-am335x - DMA support - uses dma to accelerate short bursts of read back rather than full blown DMA buffer support. Greatly improved performance. Includes an MFD addition to give access to the address needed for DMA. * tsl2583 - Device tree bindings Cleanups and minor fixes * ad7192 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) - Rename reg variable to reflect which regulator it is * ad5933 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * ad7746 - Fix a missing return value (fallout from previous patch set) * ad7780 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * ad9832 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) - Rename reg regulator to reflect which one it is * ad9834 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * hts221 - Remove a duplicated include * maxim thermocouple - Handle a wrong storage side in read function. Prevent any problems that might be introduced by additions to this driver in future. * tsl2583 - big set from Brian Masney to drive this towards a staging graduation. - Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps) - Improved error handling in various functions - Drop redundant power_state custom sysfs attribute. - Use IIO_*_ATTR* macros for remaining attributes. - Return an error code to userspace on invalid parameters being writen to sysfs files. - Add locking to various attribute accesses to remove possible races. - Add defines for various magic numbers. - Use smbus_read_byte_data instead of a write_byte followed by read_byte. - Query only relevant registers in probe. - Tidy up ordering of code comments. - Remove a pointless power off sequence in taos_chip_on. - Don't bother shutting down the chip when updating the lux table. The table is held entirely in the driver and doesn't effect the chip at all. - Drop a redundant i2c call in taos_als_calibrate where the same register is read twice in a row.
| * Merge branch 'ib-iio-mfd-ti335x_dma' into togregJonathan Cameron2016-11-051-3/+145
| |\ | | | | | | | | | | | | | | | A local branch created as Lee requested these two patches were applied in a fashion that would later let him merge the same branch into MFD if needed.
| | * drivers: iio: ti_am335x_adc: add dma supportMugunthan V N2016-11-051-3/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the required pieces to ti_am335x_adc driver for DMA support Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * | iio: adc: at91: add suspend and resume callbackWenyou Yang2016-11-051-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add suspend/resume callback, support the pinctrl sleep state when the system suspend as well. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | Merge 4.9-rc3 into staging-nextGreg Kroah-Hartman2016-10-301-0/+2
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | This resolves a merge issue with drivers/staging/iio/accel/sca3000_core.c and we want the fixes all in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errorsMika Westerberg2016-10-091-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 08e05d1fce5c ("ti-adc081c: Initial triggered buffer support") added triggered buffer support but that also requires CONFIG_IIO_TRIGGERED_BUFFER, otherwise we get errors from linker such as: drivers/built-in.o: In function `adc081c_remove': drivers/iio/adc/ti-adc081c.c:225: undefined reference to `iio_triggered_buffer_cleanup' Fix these by explicitly selecting both CONFIG_IIO_TRIGGERED_BUFFER and CONFIG_IIO_BUFFER in Kconfig for the driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: ti-adc0832: add triggered buffer supportAkinobu Mita2016-10-232-19/+89
| | | | | | | | | | | | | | | | | | | | | | | | This adds triggered buffer support for the ti-adc0832 driver. Tested with ADC0831 and ADC0832 by using SYSFS trigger. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc: ti-adc161s626: add regulator supportMatt Ranostay2016-09-271-11/+44
| | | | | | | | | | | | | | | | Allow IIO_CHAN_INFO_SCALE and IIO_CHAN_INFO_OFFSET attributes for processing by checking voltage from a regulator. Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio:adc: Add support for AD7766/AD7767Lars-Peter Clausen2016-09-273-0/+343
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1, AD7767-2 Analog to Digital converters. It's a family of single channel 24-bit SAR ADCs. They are all digital interface compatible and the main difference is the internal decimation rate and analog performance. For communication with the host processor a SPI interface is used. In addition the part has a data ready pin that is pulsed for one MCLK cycle when a conversion has completed and can be used as a IIO trigger. Datasheets: http://www.analog.com/media/en/technical-documentation/data-sheets/AD7766.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD7767.pdf Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio:max1027: Use iio_trigger_validate_own_device() helperLars-Peter Clausen2016-09-271-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use the new iio_trigger_validate_own_device() to verify that the trigger can only be attached to the matching IIO device rather than using a custom variant. While the implementation of iio_trigger_validate_own_device() and the custom variant and are not identical their behaviour is. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | drivers: iio: max1027: Fix sparse warning: "dubious: x | !y"Sandhya Bankar2016-09-241-1/+3
|/ | | | | | | | Fixing below warning: drivers/iio/adc/max1027.c:241:34: warning: dubious: x | !y . Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: adc: men_z188_adc: constify iio_info structuresJulia Lawall2016-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for iio_info structures that are only stored in the info field of a iio_dev structure. This field is declared const, so iio_info structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct iio_info i@p = { ... }; @ok@ identifier r.i; struct iio_dev e; position p; @@ e.info = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct iio_info e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct iio_info i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 1529 312 0 1841 731 drivers/iio/adc/men_z188_adc.o and after the change it is: text data bss dec hex filename 1689 168 0 1857 741 drivers/iio/adc/men_z188_adc.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge tag 'iio-for-4.9b' of ↵Greg Kroah-Hartman2016-09-1410-9/+1138
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of iio new device support, features and cleanups for the 4.9 cycle. New device support * ad8801 dac - new driver supporting ad8801 and ad8803 DACs. * adc12138 - new driver supporting TI adc12130/adc12132 and adc12138 ADCs. * ltc2485 adc - new driver * mxc6255 - add support for the mxc6225 part name and fixup the ID check so it works. * vz89x VOC sensor - add support for the vz89te part which drops the voc_short channel and adds CRCs compared to other supported parts. New features * core - immutable triggers. These effectively grant exclusive control over a trigger. The typical usecase is a device representing an analog part (perhaps a MUX) that needs to control the sampling of a downstream ADC. - resource managed trigger registration and triggered_buffer_init. - iio_push_event now protected against case of the event interface registration not having yet occured. Only matters if an interrupt can occur during this window - might happen on shared interrupt lines. - helper to let a driver query if the trigger it is using is provided by itself (using the convention of both device and trigger having the same parent). * tools - iio-utils. Used channel modifier scaling in preference to generic scaling when both exist. * at91-adc - Add support for touchscreen switches closure time needed by some newer parts. * stx104 - support the ADC channels on this ADC/DAC board. As these are the primary feature of the board also move the driver to the iio/adc directory. * sx9500 - device tree bindings. Cleanups / Fixes * ad5755 - fix an off-by-one on devnr limit check (introduced earlier this cycle) * ad7266 - drop NULL check on devm_regulator_get_optional as it can't return NULL. * ak8974 - avoid an unused functional warning due to rework in PM core code. - remove .owner field setting as done by i2c_core. * ina2xx - clear out a left over debug field from chip global data. * hid-sensors - avoid an unused functional warning due to rework in PM core code. * maxim-thermocouple - fix non static symbol warnings. * ms5611 - fetch and enable regulators unconditionally when they aren't optional. * sca3000 - whitespace cleanup. * st_sensors - fetch and enable regulators unconditionally rather than having them supported as optional regulators (missunderstanding on my part amongst others a while back) - followup to previous patch fixes error checking on the regulators. - mark symbols static where possible. - use the 'is it my trigger' help function. This prevents the odd case of another device triggering from the st-sensors trigger whilst the st-sensors trigger is itself not using it but rather using say an hrtimer. * ti-ads1015 - add missing of_node_put. * vz89x - rework to all support of new devices. - prevent reading of a corrupted buffer. - fixup a return value of 0/1 in a bool returning function. Address updates - Vlad Dogaru email address change.
| * iio: adc: at91: Add support for Touchscreen Switches Closure TimeNicolas Ferre2016-09-051-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | On newer components compatible with the at91sam9x5, the Touchscreen Switches Closure Time or TSSCTIM value of the Touchscreen Mode Register is not filled at all. On some hardware, having no time indicated for it may lead to incoherent values and jitter. We fix this time to 10us as it is usually difficult to retrieve impedance values from LCD manufacturers. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: devm_regulator_get_optional never returns NULLCrt Mori2016-09-052-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is inspired by a comment of Jonathan Cameron on patch of Linus Walleij commit aeb55fff3891834e07a3144159a7298a19696af8 ("iio: st_sensors: fetch and enable regulators unconditionally"). Because changes made in this patch are actually reference generators they should be using devm_regulator_get_optional, but if they do not explicitly set the reference to NULL they should not be using IS_ERR_OR_NULL, but simple IS_ERR check. Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: stx104: Add IIO support for the ADC channelsWilliam Breathitt Gray2016-09-033-0/+376
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Apex Embedded Systems STX104 features 16 channels of single-ended (8 channels of true differential) 16-bit analog input. Differential input configuration may be selected via a physical jumper on the device. Similarly, input polarity (unipolar/bipolar) is configured via a physical jumper on the device. Input gain selection is available to the user via software, thus allowing eight possible input ranges: +-10V, +-5V, +-2.5V, +-1.25V, 0 to 10V, 0 to 5V, 0 to 2.5V, and 0 to 1.25V. Four input gain configurations are supported: x1, x2, x4, and x8. This ADC resolution is 16-bits (1/65536 of full scale). Analog input samples are taken on software trigger; neither FIFO sampling nor interrupt triggering is supported by this driver. The Apex Embedded Systems STX104 is primarily an analog-to-digital converter device. The STX104 IIO driver was initially placed in the DAC directory because only the DAC portion of the STX104 was supported at the time. Now that ADC support has been added to the STX104 IIO driver, the driver should be moved to the more appropriate ADC directory. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: ina2xx: remove unused debug field from chip global dataAlison Schofield2016-09-031-5/+0
| | | | | | | | | | | | | | | | | | | | | | commit 1961bce76452 "iio: ina2xx: Remove trace_printk debug statements" removed the code that used the chip->prev_ns field. This patch cleans it up further by removing the unused field and assignments. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: add ADC12130/ADC12132/ADC12138 ADC driverAkinobu Mita2016-08-313-0/+565
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds Texas Instruments' ADC12130/ADC12132/ADC12138 12-bit plus sign ADC driver. I have tested with the ADC12138. The ADC12130 and ADC12132 are not tested but these are similar to ADC12138 except that the mode programming instruction is a bit different. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: ti-ads1015: add missing of_node_put() in ↵Wei Yongjun2016-08-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | ads1015_get_channels_config_of() When terminating for_each_child_of_node() iteration with break or return, of_node_put() should be used to prevent stale device node references from being left behind. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: ltc2485: add support for Linear Technology LTC2485 ADCAlison Schofield2016-08-293-0/+158
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds basic support for the LTC2485 ADC - a delta-sigma analog-to-digital converter with an I2C interface that operates in single shot conversion mode. The driver supports an on board 5V reference and the power-on default configuration which rejects both 50hz & 60hz line frequencies and operates in 1x speed mode. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge 4.8-rc5 into staging-nextGreg Kroah-Hartman2016-09-056-7/+48
|\ \ | |/ |/| | | | | | | We want the staging fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: rockchip_saradc: reset saradc controller before programming itCaesar Wang2016-08-232-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SARADC controller needs to be reset before programming it, otherwise it will not function properly. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-iio@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sampleVignesh R2016-08-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that open delay and sample delay for each channel is configurable via DT, the default IDLE_TIMEOUT value is not enough as this is calculated based on hardcoded macros. This results in driver returning EBUSY sometimes. Fix this by increasing the timeout value based on maximum value possible to open delay and sample delays for each channel. Fixes: 5dc11e810676e ("iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters") Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent accessVignesh R2016-08-211-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is possible that two or more ADC channels can be simultaneously requested for raw samples, in which case there can be race in access to FIFO data resulting in loss of samples. If am335x_tsc_se_set_once() is called again from tiadc_read_raw(), when ADC is still acquired to sample one of the channels, the second process might be put into uninterruptible sleep state. Fix these issues, by protecting FIFO access and channel configurations with a mutex. Since tiadc_read_raw() might take anywhere between few microseconds to few milliseconds to finish execution (depending on averaging and delay values supplied via DT), its better to use mutex instead of spinlock. Fixes: 7ca6740cd1cd4 ("mfd: input: iio: ti_amm335x: Rework TSC/ADC synchronization") Signed-off-by: Vignesh R <vigneshr@ti.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio:ti-ads1015: fix a wrong pointer definition.Giorgio Dal Molin2016-08-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | The call to i2c_get_clientdata(client) returns a struct iio_dev*, not the needed struct ads1015_data*. We need here an intermediate step as in the function: void ads1015_get_channels_config(struct i2c_client *client). Signed-off-by: Giorgio Dal Molin <giorgio.nicole@arcor.de> Fixes: ecc24e72f437 ("iio: adc: Add TI ADS1015 ADC driver support") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: at91: unbreak channel adc channel 3Anders Darander2016-08-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver always assumes that an input device has been created when reading channel 3. This causes a kernel panic when dereferencing st->ts_input. The change was introduced in commit 84882b060301 ("iio: adc: at91_adc: Add support for touchscreens without TSMR"). Earlier versions only entered that part of the if-else statement if only the following flags are set: AT91_ADC_IER_XRDY | AT91_ADC_IER_YRDY | AT91_ADC_IER_PRDY Signed-off-by: Anders Darander <anders@chargestorm.se> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: ad799x: Fix buffered capture for ad7991/ad7995/ad7999Lars-Peter Clausen2016-08-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The data buffer for captured mode for the ad799x driver is allocated in the update_scan_mode() callback. This callback is not set in the iio_info struct for the ad7791/ad7995/ad7999, which means that the data buffer is not allocated when a captured transfer is started. As a result the driver crashes when the first sample is received. To fix this properly set the update_scan_mode() callback. Fixes: d8dca33027c1 ("staging:iio:ad799x: Preallocate sample buffer") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge tag 'iio-for-4.9a' of ↵Greg Kroah-Hartman2016-08-237-17/+581
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-testing Jonathan writes: First round of new features, device support and cleanups for IIO in the 4.9 cycle. Device support * ak8974 - New driver and bindings for this 2009 vintage magnetometer (it was very popular back then!) * atlas-ph-sensor - ORP sensor support(I had to look up what one of these was) * cio-dac - New driver for Measurement Computing DAC boards * dmard06 - New driver for Domintech DMARDO6 accelerometer. Also vendor prefix. * dmard09 - New driver for Domintech DMARD09 accelerometer. * maxim-thermocouple - max6675 and max31855 new driver * mt6577 auxdac - new driver for this Mediatek chip mt2701, mt6577 and mt8173 have this hardware. * ti-adc161s626 - new driver for this TI single channel differential ADC. * vcnl4000 - support vcnl4010 and vcnl4020 which are compatible for all features currently supported by this driver. New features * Core - Allow retrieving of underlying iio_dev from a callback buffer handle. This is needed to allow client drivers to perform operations such as configuring the trigger used. * hid-sensors - asynchronous resume support to avoid really long resume times. * kxcjk-1013 - add the mysterious KIOX000A ACPI id seen in the wild. * Tools - lsiio now enumerates processed as well as raw channels. Cleanup * ad7298 - use iio_device_claim_direct_mode and friends to simplify locking around mode switching and drop some boilerplate. * ad7793 - use iio_device_claim_direct_mode and friends to simplify locking around mode switching and drop some boilerplate. * ade7854 - checkpatch fixups (alignment of parameters) * atlas-ph-sensor - use iio_device_claim_direct_mode and friends to simplify locking around mode switching and drop some boilerplate. - Switch to REGCACHE_NONE as there are no useful register to cache. * bma180 - use iio_device_claim_direct_mode and friends to simplify locking around mode switching and drop some boilerplate. * hdc100x - Add mention of the HDC1000 and HDC1008 to the Kconfig help text. * isl29018 - Add driver specific prefixes to defines and function names. - Remove excessive logging. - Drop newlines which add nothing to readability. - General tidying up of comments. - Drop I2C_CLASS_HWMON as irrelevant to driver. * isl29028 - Add driver specific prefixes to defines, enums and function names. - Drop comma's from available attribute output as not ABI compliant. - Drop I2C_CLASS_HWMON as irrelevant to driver. * kxsd9 - devicetree bindings. * mag3110 - This one wasn't locking to protect against mode switches during raw_reads. Use the iio_claim_direct_mode function to fix this buglet. * maxim-theromcouple - Fix missing selects for triggered buffer support in Kconfig. * nau7802 - Use complete instead of complete_all as only one completion at a time. * sx9500 - Use complete instead of complete_all as only one completion at a time. * us5182d - Add a missing error code asignment instead of checking the result of an already checked statement. * vcnl4000 - Use BIT macro where appropriate. - Refactor return codes in read_raw callback. - Add some missing locking for concurrent accesses to the device.
| * iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.Zhiyong Tao2016-08-213-0/+305
| | | | | | | | | | | | | | | | | | | | | | | | Add Mediatek auxadc driver based on iio. It will register a device in iio and support iio. So thermal can read auxadc channel to sample data by iio device. It is tested successfully on mt2701 platform. Mt8173 and mt6577 platforms are not tested. But the expectation is compatible. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: ti-adc161s626: add support for TI 1-channel differential ADCsMatt Ranostay2016-08-213-0/+261
| | | | | | | | | | | | | | Add support for Texas Instruments ADC141S626, and ADC161S626 chips. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: Use complete() instead of complete_all()Daniel Wagner2016-08-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: waiter context waker context nau7802_read_irq() reinit_completion() nau7802_read_conversion() wait_for_completion_interruptible_timeout() nau7802_eoc_trigger() complete() Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: ad7298: use iio helper function to guarantee direct modeAlison Schofield2016-07-241-10/+10
| | | | | | | | | | | | | | | | | | Replace the code that guarantees the device stays in direct mode with iio_device_claim_direct_mode() which does same. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: ad7793: use iio helper function to guarantee direct modeAlison Schofield2016-07-241-6/+4
| | | | | | | | | | | | | | | | | | Replace the code that guarantees the device stays in direct mode with iio_device_claim_direct_mode() which does same. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge tag 'iio-for-4.8c' of ↵Greg Kroah-Hartman2016-07-1427-20/+761
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of IIO new device support, features and cleanups for the 4.8 cycle. New core features - Selection of the clock source for IIO timestamps. This is done per device as it makes little sense to have events in one timebase and data timestamped on another. Biggest reason for this is that we currently use a clock source which is non monotonic which can result in 'interesting' data sets. (Includes export for get_monotonic_corse64 which Thomas Gleixner didn't mind in an earlier version.) - MAINTAINERS add the git tree to the list for IIO. New device support + a kind of indirect staging graduation. * Broadcom iproc-static-adc - new driver * mcp4531 - support for MCP454x, MCP456x, MCP464x and MCP466x potentiometers * mpu6050 - support the IC20608 6 axis motion tracking device * st-sensors - support the lis3l02dq + drop the lis3l02dq driver from staging. The general purpose driver is missing event support, but good to get rid of this driver which was rather long in the tooth. New driver features * ak8975 - Add vid regulator support and refactor handling in general. - Allow a delay after enabling regulators. - Runtime and system PM. * bmg160 - filter frequency control support. * bmp280 - SPI device support. - EOC interrupt support for the BMP085 - power management support. - supply regulator support. - reset gpio support - dt bindings for reset gpio and regulators. - of table to support device tree registration * max1363 - Device tree bindings. * mcp4531 - Device tree bindings. * st-pressure - temperature channels as part of triggered buffer (previously not due probably to alignment issues - see below). - lps22hb open drain interrupt support. - lps22hb temperature channel support Cleanups and reworkings. * numerous ADC drivers - ensure the iio_dev->dev.of_node is set to the parent dev.of_node so as to allow client bindings to find the device. * ak8975 - Fix incorrect handling of missing regulator - make sure power is down and remove. * bmp280 - read the calibration data only once as it doesn't change. * isl29125 - Use a few macros to make code a touch more readable. * mma8452 - fix a memory leak on error. - drop an unecessary bit of return value handling. * potentiometer kconfig - typo fix. * st-pressure - drop some uninformative default assignments of elements of the channel array structure (aids readability). * st-sensors - Harden interrupt handling considerably. These are actually all using level interrupts, but at least two known boards have them wired to edge only interrupt chips. Hence a slightly interesting bit of handling is needed in which we first allow for the easy option (level triggered) and secondly check the status registers before reenabling edge interrupts and fall back to a tight loop in the thread until we successfully clear the interrupt. No harm is done if we never succeed in doing so. It's an odd patch that has been through a lot of revisions to reach a consensus on how to handle what is basically broken hardware (which the previous defaults allowed to kind of work). - Fix alignment to defined storagebytes boundaries. - Ensure alignment of power of 2 byte boundaries. This has always in theory been part of the ABI of IIO, but we missed a few that snuck in that need fixing. The effect was minor as they were only followed by timestamp channels which were correctly aligned, - Add some docs to explain the gain calculations.
| * iio: adc: add missing of_node references to iio_devMatt Ranostay2016-07-0320-0/+20
| | | | | | | | | | | | | | | | Adding missing indio_dev->dev.of_node references to allow iio consumers to access the device channels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: ti-ads1015: add indio_dev->dev.of_node referenceMatt Ranostay2016-07-031-0/+1
| | | | | | | | | | | | | | | | | | Add the pointer to the device tree node of the ADC so that iio consumers can reference the respective channels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: max1363: Add device tree bindingFlorian Vaussard2016-07-031-1/+60
| | | | | | | | | | | | | | | | This patch adds the necessary device tree binding to allow DT probing of currently supported parts. Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: Add driver for Broadcom iproc-static-adcRaveendra Padasalagi2016-07-033-0/+657
| | | | | | | | | | | | | | | | | | | | This patch adds basic driver implementation for Broadcom's static adc controller used in iProc SoC's family. Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio:core: timestamping clock selection supportGregor Boirie2016-06-3014-19/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a new per-device sysfs attribute "current_timestamp_clock" to allow userspace to select a particular POSIX clock for buffered samples and events timestamping. Following clocks, as listed in clock_gettime(2), are supported: CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW, CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and CLOCK_TAI. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Acked-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge 4.7-rc6 into staging-nextGreg Kroah-Hartman2016-07-041-2/+5
|\ \ | |/ |/| | | | | | | We want the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio:ad7266: Fix probe deferral for vrefMark Brown2016-06-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Currently the ad7266 driver treats any failure to get vref as though the regulator were not present but this means that if probe deferral is triggered the driver will act as though the regulator were not present. Instead only use the internal reference if we explicitly got -ENODEV which is what is returned for absent regulators. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio:ad7266: Fix support for optional regulatorsMark Brown2016-06-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ad7266 driver attempts to support deciding between the use of internal and external power supplies by checking to see if an error is returned when requesting the regulator. This doesn't work with the current code since the driver uses a normal regulator_get() which is for non-optional supplies and so assumes that if a regulator is not provided by the platform then this is a bug in the platform integration and so substitutes a dummy regulator. Use regulator_get_optional() instead which indicates to the framework that the regulator may be absent and provides a dummy regulator instead. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio:ad7266: Fix broken regulator error handlingMark Brown2016-06-261-1/+1
| | | | | | | | | | | | | | | | | | | | All regulator_get() variants return either a pointer to a regulator or an ERR_PTR() so testing for NULL makes no sense and may lead to bugs if we use NULL as a valid regulator. Fix this by using IS_ERR() as expected. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge tag 'iio-for-4.8b' of ↵Greg Kroah-Hartman2016-06-291-1/+25
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second round of new iio device support, features and cleanups in the 4.8 cycle Firstly some contact detail updates: * NXP took over freescale. Update the mma8452 header to reflect this. * Martin Kepplinger email address change in mma8452 header. * Adriana Reus has changed email address. Update .mailmap. * Matt Ranostay has changed email address. Update .mailmap. New Device Support * max1363 - add the missing i2c_device_ids for a couple of parts so they can actually be used. * ms5867 - add device ids for ms5805 and ms5837 parts. New Features * ad5755 - DT support. This one was a bit controversial and under review for a long time. Still no one could come up with a better solution. * stx104 - add gpio support * ti-adc081c - Add ACPI device ID matching. Core changes * Refuse to register triggers with duplicate names. There is no way to distinguish between them so this makes no sense. A few drivers do not generate unique names for each instance of the device present. We can't fix this without changing ABI so leave them and wait for someone to actually take the rare step of two identical accelerometers on the same board. * buffer-dma - use ARRAY_SIZE in a few appropriate locations. Tools * Fix the fact that the --trigger-num option in generic_buffer didn't allow 0 which is perfectly valid in the ABI. Cleanups * as3935 - improve error reporting. - remove redundant zeroing of a field in iio_priv. * gp2ap020a00f - use the iio_device_claim_*_mode helpers rather than open coding locking around mode changes. * isl29125 - use the iio_device_claim_*_mode helpers rather than open coding locking. * lidar - use the iio_device_claim_*_mode helpers rather than open coding locking. * mma8452 - more detail in devices supported description in comments (addresses and similar) * sca3000 - add a missing error check. * tcs3414 - use the iio_device_claim_*_mode helpers rather than open coding locking. * tcs3472 - use the iio_device_claim_*_mode helpers rather than open coding locking.
| * | iio: adc: max1363: Fix missing i2c_device_id for MAX1164x partsFlorian Vaussard2016-06-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | The driver supports MAX11644, MAX11645, MAX11646 and MAX11647 parts. But the corresponding i2c_device_id are missing. Add them! Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * | iio: adc: ti-adc081c: add ACPI device ID matchingDan O'Donovan2016-06-271-1/+25
| | | | | | | | | | | | | | | | | | | | | Add ACPI device ID matching for TI ADC081C/ADC101C/ADC121C ADCs. Signed-off-by: Dan O'Donovan <dan@emutex.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
OpenPOWER on IntegriCloud