summaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc
Commit message (Collapse)AuthorAgeFilesLines
* iio:adc:berlin2-adc: use channel-array size directlyHartmut Knaack2015-08-021-2/+1
| | | | | | | | | Drop the otherwise unused definition of the channel-array size and use it directly in _probe - makes it a bit more obvious. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio:adc:berlin2-adc: use short operator formatHartmut Knaack2015-08-021-3/+2
| | | | | | | | | | | | Use augmented assignment to subtract the offset for negative temperature values. Specify the amount of private data to be allocated through devm_iio_device_alloc() with sizeof(*priv), as it is shorter and common practice in IIO. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio:adc:berlin2-adc: constify iio_chan_specHartmut Knaack2015-08-021-1/+1
| | | | | | | | Mark berlin2_adc_channels array as constant. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio:adc:berlin2-adc: pass up real error codeHartmut Knaack2015-08-021-2/+2
| | | | | | | | Pass up the real error code returned by platform_get_irq_byname(). Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: adc: vf610: Determine sampling frequencies by using minimum sample timeSanchayan Maity2015-07-201-4/+75
| | | | | | | | | | | | | | | | | | | | | The driver currently does not take into account the minimum sample time as per the Figure 6-8 Chapter 9.1.1 12-bit ADC electrical characteristics. We set a static amount of cycles instead of considering the sample time as a given value, which depends on hardware characteristics. Determine sampling frequencies by first reading the device tree property node and then calculating the required Long Sample Time Adder (LSTAdder) value, based on the ADC clock frequency and sample time value obtained from the device tree. This LSTAdder value is then used for calculating the sampling frequencies possible. In case the sample time property is not specified through the device tree, a safe default value of 1000ns is assumed. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: adc: mcp320x: Add support for mcp3301Andrea Galbusera2015-07-202-3/+17
| | | | | | | This adds support for Microchip's 13 bit 1 channel AD converter MCP3301 Signed-off-by: Andrea Galbusera <gizero@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: Drop owner assignment from i2c_driverKrzysztof Kozlowski2015-07-112-2/+0
| | | | | | | | i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio:adc:Kconfig: rework help descriptionsHartmut Knaack2015-06-281-10/+38
| | | | | | | | | | | Rework the help text of several ADCs to make sure that: - the module name is mentioned, if the driver can be built as a module - "If unsure, say N" messages are dropped - right indentation is maintained Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: adc: cc10001: Power-up the ADC at probe time when used remotelyNaidu Tellapati2015-06-141-5/+21
| | | | | | | | | | | | | | | | | The ADC is typically shared with remote CPUs not running Linux. However, there is only one register to power-up/power-down. Remote CPUs aren't able to power-up the ADC, and rely in Linux doing it instead. This commit uses the adc-reserved-channels devicetree property to distinguish shared usage. In this case, the ADC is powered up at probe time. If the ADC is used only by the CPU running Linux, power-up/down at runtime, only when neeeded. Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge tag 'iio-for-v4.2c' of ↵Greg Kroah-Hartman2015-06-102-47/+107
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle. Given Linus announced a 4.8rc coming up, hopefully time for one more lot of IIO patches this cycle. Some of these are actually improvements / fixes for patches earlier in the cycle. New device support * st_accel driver - support devices with 8 bit channels. Cleanup * A general cleanup of the iio tools under /tools/ from Hartmut. I'm more than a little embarassed by how bad some of these were! Are well, much more refined and less bug prone now. These cover lots of stuff like unhandled error returns, memory leaks as well as general refactoring to tidy the code up. * iio_simple_dummy - fix memory leaks in the init functions, drop some pointless error returns from functions that never generate errors and make the module parameter explicitly unsigned. * More buffer handling reworks from Lars-Peter, this time targetting hardware buffers (a little used corner that looks likely to get more use in the near future). Specifically: - Always compute the masklength as inkernel buffer users may need it. - Add a means of labeling which buffer modes a given buffer implementation supports. - In the case of hardware buffers, require strict scan matching rather than matching to a superset. Currently the demux is bypassed by these drivers (this may well not change for efficiency reasons) so allowing a superset of channels to be selected would otherwise lead to more data than requested confusing userspace. Driver funcationality improvments * mmc35240 - adds a compensation to the raw values as borrowed form Memsic's own input driver. * mma8452 - event support - event debouncing - high pass filter configuration - triggers * vf610 - allow conversion mode to be adjusted Fixlets * mmc35240 - Off by one error that by coincidence had no real effect. - i2c_device_name should be lowercase. - Lack of null terminator at end of attributes array. - Avoid computing the fractional part of the magnetic field by moving the scaling into userspace where floating point is available to simplify the maths. - Use a smaller sleep before assuming the measurement is done. This is safe and improves the possible polling rate. - Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd code and the value used in the code seems to be correct. * stk3310 - make a local variable signed to ensure error handling works. * twl4030 - fix calculation of the temperature sense current - bug unlikely to have ever been noticed as the difference is small. - Fix errors in descriptions.
| * iio: adc: vf610: implement configurable conversion modesStefan Agner2015-06-071-42/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support configurable conversion mode through sysfs. So far, the mode used was low-power, which is enabled by default now. Beside that, the modes normal and high-speed are selectable as well. Use the new device tree property which specifies the maximum ADC conversion clock frequencies. Depending on the mode used, the available resulting conversion frequency are calculated dynamically. Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: twl4030_madc: Fix description of twl4030_madc_set_current_generator()H. Nikolaus Schaller2015-06-071-4/+2
| | | | | | | | | | | | | | | | The @chan parameter can be 0 or 1 and not a bit mask. Fix wrong description. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: twl4030_madc: Fix calculation of the temperature sense currentH. Nikolaus Schaller2015-06-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | The bit mask to read the setting of the constant current source for measuring the NTC voltage was the wrong one. Since default value is initialized to the lowest level (000 = 10uA) the difference was probably never noticed in practice. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge 4.1-rc7 into staging-testingGreg Kroah-Hartman2015-06-081-1/+1
|\ \ | | | | | | | | | | | | | | | | | | We want the staging tree fixes in here too to help with testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | iio: adc: twl6030-gpadc: Fix modaliasAxel Lin2015-05-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Remove extra space between platform prefix and DRIVER_NAME in MODULE_ALIAS. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | Merge tag 'iio-for-v4.2b' of ↵Greg Kroah-Hartman2015-05-246-15/+461
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle. Core functionality * i and q modifiers from quadrature channels. * IIO_CHAN_INFO_OVERSAMPLING_RATIO added. * High pass filter attributes added to mirror the existing low pass filter ones. Core cleanups * Make IIO tools building more cross compiler friendly. * Substantial rework of the function __iio_update_buffers to greatly simplify a hideously evolved function. New drivers and support * ACPI0008 ambient light sensor driver. This one has been around a long time to will be good to finally get it into mainline. * Berlin SOC ADC support. * BMC150 magnetometer. The accelerometer in the same package has been supported for quite some time, so good to have this half as well. * m62332 DAC driver * MEMSIC MMC35420 magnetometer. * ROHM BH1710 and similar ambient light sensors. * Sensortek STK3310 light sensor. * Sensortek STK8312 accelerometer. * Sensortek STK8BA50 accelerometer. * ti-adc128s052 gains support form the adc122s021 2 channel ADC. Driver cleanups and functionality. * Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled. * bmc150 - decouple trigger from buffer to allow other triggers to be used. * bmg160 - decouple trigger from buffer to allow other triggers to be used. Fix a trivial unused field. * Constify a load of platform_device_id structures. * inv_mpu6050 - device tree bindings. * hid-sensors - fix a memory leak during probe if certain errors occur. * ltr501 - illuminance channel derived (in an non obvious fashion) from the intensity channels. * ltr501 - fix a boundary check on the proximity threshold. * mlx90614 - drop a pointless return. * mma8452 - Debugfs register access and fix a bug that had no effect (by coincidence) * ti_am335x_adc - add device tree bindings for sample-delay, open-delay and averaging. The ideal settings for these tend to be board design specific.
| * | iio:adc128s052: add support for adc122s021Urs Fässler2015-05-232-8/+26
| | | | | | | | | | | | | | | Signed-off-by: Urs Fässler <urs.fassler@bytesatwork.ch> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * | iio: adc: add support for BerlinAntoine Tenart2015-05-233-0/+386
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the support of the Berlin ADC, available on Berlin SoCs. This ADC has 8 channels available, with one connected to a temperature sensor. The particularity here, is that the temperature sensor connected to the ADC has its own registers, and both the ADC and the temperature sensor must be configured when using it. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * | iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parametersVignesh R2015-05-131-6/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add optional DT properties to set open delay, sample delay and number of averages per sample for each adc step. Open delay, sample delay and averaging are some of the parameters that affect the sampling rate and accuracy of the sample. Making these parameters configurable via DT will help in balancing speed vs accuracy. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * | iio: adc: axp288: Constify platform_device_idKrzysztof Kozlowski2015-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | Merge 4.1-rc4 into staging-nextGreg Kroah-Hartman2015-05-186-43/+53
|\ \ \ | |/ / |/| / | |/ | | | | We want the fixes in here for testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'iio-fixes-for-4.1a-take2' of ↵Greg Kroah-Hartman2015-05-136-43/+53
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: The usual mixed bag of fixes for IIO in the 4.1 cycle. Second version of this pull request as a small fix to a fix turned up before Greg pulled it for a cc10001 patch near the top of the tree. One core fix * Set updated for a iio kfifo was incorrectly set to false during a failed update, resulting in atttempts to repeat the failed operation appearing to succeed. This time I've decided to list the driver fixes in alphabetical order rather than 'randomly'. * axp288_adc - a recent change added a check for valid info masks when reading channels from consumer drivers. * bmp280 - temperature compensation was failing to read the tfine value, hence causing a temperature of 0 to always be returned and incorrect presure measurements. * cc10001 - Fix channel number mapping when some channels are reserved for remote CPUs. Fix an issue with the use of the power-up/power-down register (basically wrong polarity). Fix an issue due to the missinterpretting the return value from regulator_get_voltage. Add a delay before the start bit as recommended for the hardware to avoid data corruption. * hid pressure - fix channel spec of modfiied, but no modifier (which makes no sense!) * hid proximity - fix channel spec of modified, but no modifier (which makes no sense!). Fix a memory leak in the probe function. * mcp320x - occasional incorrect readings on dma using spi busses due to cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers. * mma9551 - buffer overrun fix (miss specified maximum length of buffers) * mma9553 - endian fix on status message. Add an enable element for activity channel. Input checking for activity period to avoid rather unpredictable results. * spmi-vadc - fix an overflow in the output value normalization seen on some boards. * st-snesors - oops due to use of a mutex that is not yet initialized during probe. * xilinx adc - Some wrong register addresses, a wrong address for vccaux channel, incorrect scale on VREFP and incorrect sign on VREFN.
| | * iio: adc: cc10001: Add delay before setting START bitNaidu Tellapati2015-05-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to hardware team there should be some delay after setting channel number, start mode and before setting START. Add a one microsecond delay for this purpose. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: cc10001: Fix regulator_get_voltage() return value checkNaidu Tellapati2015-05-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | regulator_get_voltage() returns a non-negative value in case of success, and a negative error in case of error. Let's fix this. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: cc10001: Fix incorrect use of power-up/power-down registerNaidu Tellapati2015-05-121-14/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present we are incorrectly setting the register to 0x1 to power up the ADC. Since it is an active high power down register, we need to set the register to 0x0 to actually power up. Conversely, writing 0x1 to the register powers it down. This commit adds a couple of helpers to make the code clearer and then use them to do the power-up/power-down properly. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: cc10001: Fix the channel number mappingNaidu Tellapati2015-05-081-11/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When some of the ADC channels are reserved for remote CPUs, the scan index and the corresponding channel number doesn't match. This leads to convesion on the incorrect channel during triggered capture. Fix this by using a scan index to channel mapping encoded in the iio_chan_spec for this purpose while starting conversion on a particular ADC channel in trigger handler. Also, the channel_map is not really used anywhere but in probe(), so no need to keep track of it. Remove it from device structure. While here, add 1 to number of channels to register timestamp channel with the IIO core. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: mcp320x: Fix occasional incorrect readingsMichael Welling2015-05-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Without the cacheline alignment, the readings will occasionally incorrectly return 0. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: xilinx: Fix VREFN signThomas Betker2015-04-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The VREFN channel is bipolar, not unipolar. Small negative values do occur (e.g., -1mV), and unsigned conversion maps them incorrectly to large positive values (about +1V), so fix this. Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: xilinx: Fix VREFP scaleThomas Betker2015-04-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The scaling factor for VREFP is 3.0/4096, not 1.0/4096; fix this to get correct readings. Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: xilinx: Fix "vccaux" channel .addressThomas Betker2015-04-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | For the "vccaux" channel, read the VCCAUX register, not VCCINT. Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: xilinx: Fix register addressesThomas Betker2015-04-191-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Define the register addresses for MIN_VCCPINT, MIN_VCCPAUX, MIN_VCCO_DDR correctly. Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: spmi-vadc: Fix overflow in output value normalizationIvan T. Ivanov2015-04-181-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | With 'dx' equal to 0.625V and 15 bit ADC, calculations overflow when difference against GND is ~20% of the ADC range. Fix this. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio/axp288_adc: add missing channel info maskJacob Pan2015-04-091-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 65de7654d39c70c2b ("iio: iio: Fix iio_channel_read return if channel havn't info") added a check for valid info masks. This patch adds missing channel info masks for all ADC channels. Otherwise, iio_read_channel_raw() would return -EINVAL when called by consumer drivers. Note that the change of _processed to _raw actually fixes an ABI abuse in the original driver where it was used to avoid some special handling rather than because it was correct. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | Merge tag 'iio-for-v4.2a' of ↵Greg Kroah-Hartman2015-05-091-10/+19
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new drivers, functionality and cleanups for the 4.2 cycle New drivers / device support * st sensors driver, lsm303dlh magnetometer support. * ltr501 - support ltr301 and ltr559 chips. New functionality * IIO_CHAN_INFO_CALIBEMISSIVITY for thermopile sensors. * kxcjk1013 - make driver operational with external trigger. * Add iio targets to the tools Makefile. Cleanups * st sensors - more helpful error message if device id wrong or irq request fails, explicitly make the Block Data Update optional rather than relying on writes to address 0 not doing anything, make interrupt support optional (Not always wired, and not all devices actually have an interrupt line.) * kxcjk-1013 white space additions for readability, add the KXCJ9000 ACPI id as seen in the wild. * sx9500 - GPIO reset support, refactor the GPIO interrupt code, add power management, optimize power usage by powering down when possible, rename the gpio interrupt pin to be more useful, trivial return path simplification, trivial formatting fixes. * isl29018 - move towards ABI compliance with a view to moving this driver out of staging, add some brackets to ensure code works as expected. Note there is no actual bug as the condition being tested is always true (with current devices). * ltr501 - add regmap support to get caching etc for later patches, fix a parameter sanity check that always fails (bug introduced earlier in this series), ACPI enumeration support, interrupt rate control support, interrupt support in general and integration time control support, code alignment cleanups. * mma9553 - a number of little cleanups following a review from Hartmut after I'd already applied the original driver patch. * tmp006 - prefix some defines with TMP006 for consistency. * tsl4531 - cleanup some wrong prefixes, presumably from copy and paste. * mlx90614 - check for errors in read values, add power management, add emissivity setting, add device tree binding documentation, fix a duplicate const warning. * ti_am335x_adc - refactor the DT parsing into a separate function.
| * | iio: adc: ti_am335x_adc: refactor DT parsing into a functionVignesh R2015-04-091-10/+19
| |/ | | | | | | | | | | | | | | | | | | Refactor DT parsing into a separate function from probe() to help addition of more DT parameters later. No functional changes. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2015-04-141-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
| * | treewide: Fix typo in printk messagesMasanari Iida2015-03-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch fix spelling typo in printk messages. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge tag 'staging-4.1-rc1' of ↵Linus Torvalds2015-04-133-7/+5
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big staging driver patchset for 4.1-rc1. There's a lot of patches here, the Outreachy application period happened during this development cycle, so that means that there was a lot of cleanup patches accepted. Other than the normal coding style and sparse fixes here, there are some driver updates and work toward making some of the drivers into "mergable" shape (like the Unisys drivers.) All of these have been in linux-next for a while" * tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits) staging: lustre: orthography & coding style staging: lustre: lnet: lnet: fix error return code staging: lustre: fix sparse warning Revert "Staging: sm750fb: Fix C99 Comments" Staging: rtl8192u: use correct array for debug output staging: rtl8192e: Remove dead code staging: rtl8192e: Comment cleanup (style/format) staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp() staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp() staging: rtl8192e: Divide rtllib_rx_auth() staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning staging: rtl8192e: Fix BRACES warning staging: rtl8192e: Fix LINE_CONTINUATIONS warning staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro staging: rtl8192e: Fix RETURN_VOID warnings staging: rtl8192e: Fix UNNECESSARY_ELSE warning staging: rtl8723au: Remove unneeded comments staging: rtl8723au: Use __func__ in trace logs ...
| * | Merge 4.0-rc7 into staging-nextGreg Kroah-Hartman2015-04-074-36/+66
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | We want those fixes (iio primarily) into the -next branch to help with merge and testing issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * \ \ Merge tag 'iio-for-4.1a' of ↵Greg Kroah-Hartman2015-03-243-7/+5
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new drivers, cleanups and functionality for IIO in the 4.1 cycle. New drivers * CM3323 color sensor. * MS5611 pressure and temperature sensor. New functionality * mup6050 - create mux clients for devices described via ACPI. The reasoning and approach taken in this patch are complex. Basically there is no otherway of finding out what is there than by some esoteric look ups in the ACPI data. * cm3232 - PM support * itg3200 - suspend/resume support * mcp320x - add more ADCs to the kconfig to reflect what the driver supports (this patch and the bindings got left behind when the support was added a while back). Docs / utils * ti-adc128s052 - DT bindings. * mcp3422 - DT bindings. * mcp320x - DT bindings * ABI docs for event threshold scale attributes, in_magn_offset, proximity scan_element and thresh falling/rising values for accelerometers. All elements long in use that have slipped by being explicitly documented. * Tidy up the tools previously in drivers/staging/iio/Documentation and move them out to /tools/iio. Yet another move that should have happened long ago. This time Roberta Dobrescu did the leg work. Thanks! Core Cleanups * Export userspace IIO headers. We should have done the appropriate header splitting a long time ago. Thanks to Daniel for sorting this out. * Refactor the registring of attributes for buffers to move all non-custom ones to a vector allowing easier additions to the current set in the future. Driver Cleanups * gpiod related cleanups. Make use of the additional parameter to specify initial direciton to avoid extra code. * bmc150 - Various refactorings to reduce code repitition and prepare for hardware buffer support. Some of these cleanups are good even without the new functionality. * kmx61 - direct use of index to an array avoiding a structure element which was always the index to an element in an array of that structure. * vf610 - avoid incorrect type for return from wait_for_completion_timeout. * gp2ap020a00f - use put_unaligned_le32 for slight code simplification. * ade7754 - improve error handling including suppressing some build warnings. * ade7759 - improve error handling including suppressing some build warnings. * hmc5843 - Long line and indentation fixes. Also some constifying of various constant data. * ade7854 - 80+ character line splitting. * ad2s1210 - fix wrong printf format string. * mxs-lradc - fix wrong printf format string. * ade7954-i2c - code alignment fixes and other trivial but worthwhile bits. * periodic rtc trigger - make the frequency type an unsigned int as it is always treated as such. * jsa1212 - constify struct regmap_config as it is constant. * ad7793 - typo in the MODULE_DESCRIPTION * mma9551 - check gpiod_to_irq errors. Note that this doesn't actually cause any trouble but is worth tidying up as obviously incorrect. * mlx90614 - refactor the register symbols to make it clear which reads are to RAM not PROM.
| | * | | iio: adc: Kconfig mcp320x change description Add more ADCsSøren Andersen2015-03-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bring the Kconfig entry up to date with parts supported by the driver. Signed-off-by: Soeren Andersen <san@rosetechnology.dk> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * | | iio:adc: Fix typo in MODULE_DESCRIPTION in ad7793.cMasanari Iida2015-03-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fix spelling typo in MODULE_DESCRIPTION Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * | | iio: vf610_adc: cleanup wait_for_completion return handlingNicholas Mc Guire2015-02-041-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | return type of wait_for_completion_timeout is unsigned long not int, this patch only fixes up the return handling. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | | | Merge tag 'for-v4.1' of git://git.infradead.org/battery-2.6Linus Torvalds2015-04-133-0/+417
|\ \ \ \ \ | |_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull power supply and reset changes from Sebastian Reichel: - new API for safe access of power supply function attrs - devres support for power supply (un)registration - new drivers / chips: - generic syscon based poweroff driver - iio & charger driver for da9150 - fuel gauge driver for axp288 - bq27x00: add support for bq27510 - bq2415x: add support for bq24157s - twl4030-madc-battery: convert to iio consumer - misc fixes * tag 'for-v4.1' of git://git.infradead.org/battery-2.6: (66 commits) power: twl4030_madc_battery: Add missing MODULE_ALIAS power: twl4030-madc-battery: Convert to iio consumer. dt: power: Add docs for generic SYSCON poweroff driver. power: reset: Add generic SYSCON register mapped poweroff. power: max17042_battery: add missed blank power: max17042_battery: Use reg type instead of chip type power/reset: at91: big endian fixes for atsama5d3x power_supply: charger-manager: Fix dereferencing of ERR_PTR HID: input: Fix NULL pointer dereference when power_supply_register fails power: constify of_device_id array power/reset/rmobile-reset.c: Fix !HAS_IOMEM build power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable arm: mach-pxa: Decrement the power supply's device reference counter mfd: ab8500: Decrement the power supply's device reference counter power_supply: bq2415x_charger: Decrement the power supply's device reference counter power_supply: 88pm860x_charger: Decrement the power supply's device reference counter x86/olpc/xo15/sci: Use newly added power_supply_put API x86/olpc/xo1/sci: Use newly added power_supply_put API power_supply: charger-manager: Decrement the power supply's device reference counter power_supply: Increment power supply use counter when obtaining references ...
| * | | | iio: Add support for DA9150 GPADCAdam Thomson2015-02-253-0/+417
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for DA9150 Charger & Fuel-Gauge IC GPADC. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* | | | | iio: adc: vf610: use ADC clock within specificationStefan Agner2015-03-281-30/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Depending on conversion mode used, the ADC clock (ADCK) needs to be below a maximum frequency. According to Vybrid's data sheet this is 20MHz for the low power conversion mode. The ADC clock is depending on input clock, which is the bus clock by default. Vybrid SoC are typically clocked at at 400MHz or 500MHz, which leads to 66MHz or 83MHz bus clock respectively. Hence, a divider of 8 is required to stay below the specified maximum clock of 20MHz. Due to the different bus clock speeds, the resulting sampling frequency is not static. Hence use the ADC clock and calculate the actual available sampling frequency dynamically. This fixes bogous values observed on some 500MHz clocked Vybrid SoC. The resulting value usually showed Bit 9 being stuck at 1, or 0, which lead to a value of +/-512. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Fugang Duan <B38611@freescale.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | | | iio/adc/cc10001_adc.c: Fix !HAS_IOMEM buildRichard Weinberger2015-03-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: drivers/built-in.o: In function `cc10001_adc_probe': cc10001_adc.c:(.text+0x412e92): undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | | | iio: fix drivers that check buffer->scan_maskOctavian Purdila2015-03-072-5/+3
| |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the in-kernel push interface is used we may have a different masks on the device buffer and the kernel buffer and in this case the device should generate data for the reunion of the buffers, which is available at indio_dev->active_scan_mask. Compiled tested only except for bmc150-accel which was tested at runtime with the hardware. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | | Merge tag 'iio-fixes-for-4.0a' of ↵Greg Kroah-Hartman2015-02-282-14/+6
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of fixes for IIO in the 4.0 cycle. Note a followup set dependent on patches in the recent merge windows will follow shortly. * dht11 - fix a read off the end of an array, add some locking to prevent the read function being interrupted and make sure gpio/irq lines are not enabled for irqs during output. * iadc - timeout should be in jiffies not msecs * mpu6050 - avoid a null id from ACPI emumeration being dereferenced. * mxs-lradc - fix up some interaction issues between the touchscreen driver and iio driver. Mostly about making sure that the adc driver only affects channels that are not being used for the touchscreen. * ad2s1200 - sign extension fix for a result of c type promotion. * adis16400 - sign extension fix for a result of c type promotion. * mcp3422 - scale table was transposed. * ad5686 - use _optional regulator get to avoid a dummy reg being allocate which would cause the driver to fail to initialize. * gp2ap020a00f - select REGMAP_I2C * si7020 - revert an incorrect cleanup up and then fix the issue that made that cleanup seem like a good idea.
| * | | iio:adc:mcp3422 Fix incorrect scales tableAngelo Compagnucci2015-02-041-13/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes uncorrect order of mcp3422_scales table, the values was erroneously transposed. It removes also an unused array and a wrong comment. Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
OpenPOWER on IntegriCloud