summaryrefslogtreecommitdiffstats
path: root/drivers/ide
Commit message (Collapse)AuthorAgeFilesLines
* pata_pcmcia/ide-cs: add IDs for transcend and kingston cardsKristoffer Ericson2010-04-221-0/+4
| | | | | | | This patch adds idstrings for Kingston 1GB/4GB and Transcend 4GB/8GB. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds2010-04-084-6/+5
|\ | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Fix IDE taskfile with cfq scheduler ide: Must hold queue lock when requeueing ide: Requeue request after DMA timeout
| * ide: Fix IDE taskfile with cfq schedulerMikulas Patocka2010-04-061-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ide taskfile access is being used (for example with hdparm --security commands) and cfq scheduler is selected, the scheduler crashes on BUG in cfq_put_request. The reason is that the cfq scheduler is tracking counts of read and write requests separately; the ide-taskfile subsystem allocates a read request and then flips the flag to make it a write request. The counters in cfq will mismatch. This patch changes ide-taskfile to allocate the READ or WRITE request as required and don't change the flag later. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ide: Must hold queue lock when requeueingHerbert Xu2010-04-011-1/+1
| | | | | | | | | | | | | | | | ide-atapi requeues requests without holding the queue lock. This patch fixes it by using ide_requeue_and_plug. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ide: Requeue request after DMA timeoutHerbert Xu2010-04-012-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that my KVM virtual machines were experiencing IDE issues resulting in processes stuck on waiting for buffers to complete. The root cause is of course race conditions in the ancient qemu backend that I'm using. However, the fact that the guest isn't recovering is a bug. I've tracked it down to the change made last year to dequeue requests at the start rather than at the end in the IDE layer. commit 8f6205cd572fece673da0255d74843680f67f879 Author: Tejun Heo <tj@kernel.org> Date: Fri May 8 11:53:59 2009 +0900 ide: dequeue in-flight request The problem is that the function ide_dma_timeout_retry does not requeue the current request, causing one request to be lost for each DMA timeout. This patch fixes this by requeueing the request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-3019-3/+16
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* Revert "ide: skip probe if there are no devices on the port (v2)"David S. Miller2010-03-281-9/+3
| | | | | | | | | | This reverts commit a20b2a44eca52818ef52a94959480b7e6ea2f528. As requested by David Fries. This makes CDROMs which are slave drives on a ribbon without a master disappear and causes other similar kinds of badness. Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "via82cxxx: workaround h/w bugs"David S. Miller2010-03-271-57/+0
| | | | | | | | This reverts commit f931a5d5785d7b7c44871bd7ad2762e29dfddf29. It causes regressions for some users. Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6Linus Torvalds2010-03-0450-638/+611
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6: (49 commits) drivers/ide: Fix continuation line formats ide: fixed section mismatch warning in cmd640.c ide: ide_timing_compute() fixup ide: make ide_get_best_pio_mode() static via82cxxx: use ->pio_mode value to determine pair device speed tx493xide: use ->pio_mode value to determine pair device speed siimage: use ->pio_mode value to determine pair device speed palm_bk3710: use ->pio_mode value to determine pair device speed it821x: use ->pio_mode value to determine pair device speed cs5536: use ->pio_mode value to determine pair device speed cs5535: use ->pio_mode value to determine pair device speed cmd64x: fix handling of address setup timings amd74xx: use ->pio_mode value to determine pair device speed alim15x3: fix handling of UDMA enable bit alim15x3: fix handling of DMA timings alim15x3: fix handling of command timings alim15x3: fix handling of address setup timings ide-timings: use ->pio_mode value to determine fastest PIO speed ide: change ->set_dma_mode method parameters ide: change ->set_pio_mode method parameters ...
| * Merge branch 'master' of ↵David S. Miller2010-03-025-26/+79
| |\ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/ide-2.6
| | * ide: fixed section mismatch warning in cmd640.cChris Frey2010-01-281-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Chris Frey <cdfrey@foursquare.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * ide/ide-cs: fix order of releasing resourcesWolfram Sang2010-01-151-12/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ide_detach() called first ide_release() and then release_region(). This produced the following warnings: Trying to free nonexistent resource <000000000000c10e-000000000000c10e> Trying to free nonexistent resource <000000000000c100-000000000000c107> This is true, because the callchain inside ide_release() is: ide_release -> pcmcia_disable_device -> pcmcia_release_io So, the whole io-block is already gone for release_region(). To fix this, just swap the order of releasing (and remove the now obsolete shadowing). bzolnier: - release resources in ide_release() to fix ordering of events - remove stale FIXME note while at it Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * ide: Fix Promise UDMA33 IDE driver (pdc202xx_old)Russell King2010-01-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Sun, Jan 03, 2010 at 12:23:14AM +0000, Russell King wrote: > - with IDE > - locks the interrupt line, and makes the machine extremely painful - > about an hour to get to the point of being able to unload the > pdc202xx_old module. Having manually bisected kernel versions, I've narrowed it down to some change between 2.6.30 and 2.6.31. There's not much which has changed between the two kernels, but one change stands out like a sore thumb: +static int pdc202xx_test_irq(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long high_16 = pci_resource_start(dev, 4); + u8 sc1d = inb(high_16 + 0x1d); + + if (hwif->channel) { + /* + * bit 7: error, bit 6: interrupting, + * bit 5: FIFO full, bit 4: FIFO empty + */ + return ((sc1d & 0x50) == 0x40) ? 1 : 0; + } else { + /* + * bit 3: error, bit 2: interrupting, + * bit 1: FIFO full, bit 0: FIFO empty + */ + return ((sc1d & 0x05) == 0x04) ? 1 : 0; + } +} Reading the (documented as a 32-bit) system control register when the interface is idle gives: 0x01da110c So, the byte at 0x1d is 0x11, which is documented as meaning that the primary and secondary FIFOs are empty. The code above, which is trying to see whether an IRQ is pending, checks for the IRQ bit to be one, and the FIFO bit to be zero - or in English, to be non-empty. Since during a BM-DMA read, the FIFOs will naturally be drained to the PCI bus, the chance of us getting to the interface before this happens are extremely small - and if we don't, it means we decide not to service the interrupt. Hence, the screaming interrupt problem with drivers/ide. Fix this by only indicating an interrupt is ready if both the interrupt and FIFO empty bits are at '1'. This bug only affects PDC20246/PDC20247 (Promise Ultra33) based cards, and has been tested on 2.6.31 and 2.6.33-rc2. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * icside: bring back ->maskproc methodBartlomiej Zolnierkiewicz2010-01-121-4/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bring back ->maskproc method since it is still needed for proper operation, as noticed by Russell King: > This change is bogus. > > writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); > readb(base + ICS_ARCIN_V6_INTROFFSET_2); > > writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); > readb(base + ICS_ARCIN_V6_INTROFFSET_1); > > This sequence of code does: > > 1. enable interrupt 1 > 2. disable interrupt 2 > 3. enable interrupt 2 > 4. disable interrupt 1 > > which results in the interrupt for the second channel being enabled - > leaving channel 1 blocked. > > Firstly, icside shares its two IDE channels with one DMA engine - so it's > a simplex interface. IDE supports those (or did when the code was written) > serializing requests between the two interfaces. libata does not. > > Secondly, the interrupt lines on icside float when there's no drive connected > or when the drive has its NIEN bit set, which means that you get spurious > screaming interrupts which can kill off all expansion card interrupts on > the machine unless you disable the channel interrupt on the card. > > Since libata can not serialize the operation of the two channels like IDE > can, the libata version of the icside driver does not contain the interrupt > stearing logic. Instead, it looks at the status after reset, and if > nothing was found on that channel, it masks the interrupt from that > channel. This patch reverts changes done in commit dff8817 (I became confused due to non-standard & undocumented ->maskproc method, anyway sorry about that). Noticed-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * scc_pata: fix module unloadingBartlomiej Zolnierkiewicz2010-01-081-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | scc_pata host driver predated module unloading support for IDE host drivers so even though it supports PCI hot-unplug and implements PCI device ->remove method it doesn't allow module removal. Fix it. Add missing __init/__exit tags to module_init/module_exit functions while at it (from Peter Huewe). Noticed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | drivers/ide: Fix continuation line formatsJoe Perches2010-02-032-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | String constants that are continued on subsequent lines with \ are not good. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ide: ide_timing_compute() fixupBartlomiej Zolnierkiewicz2010-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | XFER_SW_DMA_0 mode should be excluded from the extended cycle timing computations. [ This is just a documentation fix -- code inside the affected 'if' block already makes sure to accept only PIO modes. ] Noticed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ide: make ide_get_best_pio_mode() staticBartlomiej Zolnierkiewicz2010-01-191-2/+1
| | | | | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | via82cxxx: use ->pio_mode value to determine pair device speedBartlomiej Zolnierkiewicz2010-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the current PIO mode value instead of the current transfer speed of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tx493xide: use ->pio_mode value to determine pair device speedBartlomiej Zolnierkiewicz2010-01-192-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the current PIO mode value instead of the physical maximum one of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | siimage: use ->pio_mode value to determine pair device speedBartlomiej Zolnierkiewicz2010-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the current PIO mode value instead of the physical maximum one of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | palm_bk3710: use ->pio_mode value to determine pair device speedBartlomiej Zolnierkiewicz2010-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the current PIO mode value instead of the physical maximum one of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | it821x: use ->pio_mode value to determine pair device speedBartlomiej Zolnierkiewicz2010-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the current PIO mode value instead of the physical maximum one of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cs5536: use ->pio_mode value to determine pair device speedBartlomiej Zolnierkiewicz2010-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the current PIO mode value instead of the physical maximum one of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cs5535: use ->pio_mode value to determine pair device speedBartlomiej Zolnierkiewicz2010-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the current PIO mode value instead of the physical maximum one of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cmd64x: fix handling of address setup timingsBartlomiej Zolnierkiewicz2010-01-191-7/+10
| | | | | | | | | | | | | | | | | | | | | Account for the requirements of the DMA mode currently used. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | amd74xx: use ->pio_mode value to determine pair device speedBartlomiej Zolnierkiewicz2010-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the current PIO mode value instead of the current transfer speed of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | alim15x3: fix handling of UDMA enable bitBartlomiej Zolnierkiewicz2010-01-191-25/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Clear UDMA enable bit also for PIO modes. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | alim15x3: fix handling of DMA timingsBartlomiej Zolnierkiewicz2010-01-191-16/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | Stop depending on the BIOS setup. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | alim15x3: fix handling of command timingsBartlomiej Zolnierkiewicz2010-01-191-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Stop depending on the BIOS setup. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | alim15x3: fix handling of address setup timingsBartlomiej Zolnierkiewicz2010-01-191-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Account for the requirements of the other device on the port. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ide-timings: use ->pio_mode value to determine fastest PIO speedBartlomiej Zolnierkiewicz2010-01-191-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the current PIO mode value instead of the physical maximum one to determine the fastest allowed PIO for shared PIO/DMA timings. Affected host drivers: amd74xx and via82cxxx. [ Update comment to match -DaveM ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ide: change ->set_dma_mode method parametersBartlomiej Zolnierkiewicz2010-01-1935-86/+100
| | | | | | | | | | | | | | | | | | | | | Change ->set_dma_mode method parameters to match ->set_dmamode method used in struct ata_port_operations. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: change ->set_pio_mode method parametersBartlomiej Zolnierkiewicz2010-01-1943-120/+128
| | | | | | | | | | | | | | | | | | | | | | | | Change ->set_pio_mode method parameters to match ->set_piomode method used in struct ata_port_operations. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ide: add drive->dma_mode fieldBartlomiej Zolnierkiewicz2010-01-192-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add dma_mode field to ide_drive_t matching dma_mode field used in struct ata_device. The validity of the field is restricted to ->dma_pio_mode method only currently in IDE subsystem. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ide: add drive->pio_mode fieldBartlomiej Zolnierkiewicz2010-01-193-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pio_mode field to ide_drive_t matching pio_mode field used in struct ata_device. The validity of the field is restricted to ->set_pio_mode method only currently in IDE subsystem. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | via82cxxx: fix UDMA settings programmingBartlomiej Zolnierkiewicz2010-01-191-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | * preserve 80-wire cable detection bit * don't clear UDMA settings when programming PIO/MWDMA modes Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | via82cxxx: add support for VT6415 PCIE PATA IDE Host ControllerBartlomiej Zolnierkiewicz2010-01-191-0/+2
| | | | | | | | | | | | | | | | | | | | | Based on commits 5955c7a and 7d948b1 for pata_via host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | via82cxxx: add support for vt8261 and future chipsBartlomiej Zolnierkiewicz2010-01-191-6/+4
| | | | | | | | | | | | | | | | | | | | | Based on commit e4d866c for pata_via host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | via82cxxx: workaround h/w bugsBartlomiej Zolnierkiewicz2010-01-191-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add custom struct ide_tp_ops instance to fix the internal bug of some VIA chipsets which will reset the device register after changing the nIEN bit in the device control register. Based on commit bfce5e0 for pata_via host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | via82cxxx: fix SATA cable detectionBartlomiej Zolnierkiewicz2010-01-191-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add VIA_SATA_PATA flag for cx700, vx800 and vx855 chipsets (the first port is SATA). Based on commits 7585eb1, bfce5e0 and e4d866c for pata_via host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ide: add SATA cable detection supportBartlomiej Zolnierkiewicz2010-01-191-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | via82cxxx: vx855 is a single channel controllerBartlomiej Zolnierkiewicz2010-01-191-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on commit e4d866c for pata_via host driver (PCI ID was later changed by commit 5993856). Update my credits while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | serverworks: add missing pci_dev_put() callBartlomiej Zolnierkiewicz2010-01-191-0/+1
| | | | | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | serverworks: cleanup svwks_udma_filter()Bartlomiej Zolnierkiewicz2010-01-191-29/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | * remove dead OSB4 UDMA support * remove unreachable code * make isa_dev local to ->init_chipset Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | pdc202xx_old: add ->init_hwif methodBartlomiej Zolnierkiewicz2010-01-191-10/+8
| | | | | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | opti621: remove stale driver historyBartlomiej Zolnierkiewicz2010-01-191-71/+0
| | | | | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cy82c693: remove stale driver historyBartlomiej Zolnierkiewicz2010-01-191-33/+0
| | | | | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cy82c693: fix PIO timings calculationsBartlomiej Zolnierkiewicz2010-01-191-86/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just use the standard ide_timing_compute() helper to calculate PIO timings. This fixes many issues with the open-coded version like using 16-bit timings when 8-bit ones should be used or not accounting for the enhanced cycle time specified by the device. Based on libata pata_cypress host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cmd64x: remove superfluous checks from cmd64x_set_dma_mode()Bartlomiej Zolnierkiewicz2010-01-191-6/+3
| | | | | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud