summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/alim15x3.c
Commit message (Collapse)AuthorAgeFilesLines
* ide: add "vlb|pci_clock=" parameterBartlomiej Zolnierkiewicz2008-04-271-1/+1
| | | | | | | | | | | | | | * Add "vlb_clock=" parameter for specifying VLB clock frequency (in MHz). * Add "pci_clock=" parameter for specifying PCI bus clock frequency (in MHz). While at it: * qd65xx.c: rename {active,recovery}_cycle variables to {act,rec}_cyc. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: constify struct ide_dma_opsBartlomiej Zolnierkiewicz2008-04-261-2/+9
| | | | | | | | | | | | | | | | | * Export ide_dma_exec_cmd() and __ide_dma_test_irq(). * Constify struct ide_dma_ops. * Always set hwif->dma_ops to &sff_dma_ops in ide_setup_dma() (it is later overriden by ide_init_port() if needed) and drop 'const struct ide_port_info *d' argument. While at it: * Rename __ide_dma_test_irq() to ide_dma_test_irq(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add struct ide_dma_ops (take 3)Bartlomiej Zolnierkiewicz2008-04-261-21/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add struct ide_dma_ops and convert core code + drivers to use it. While at it: * Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods. * Drop "ide_" "infixes" from DMA methods. * au1xxx-ide.c: - use auide_dma_{test_irq,end}() directly in auide_dma_timeout() * pdc202xx_old.c: - drop "old_" "infixes" from DMA methods * siimage.c: - add siimage_dma_test_irq() helper - print SATA warning in siimage_init_one() * Remove no longer needed ->init_hwif implementations. v2: * Changes based on review from Sergei: - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/ - s/drive->hwif/hwif/ in idefloppy_pc_intr(). - fix patch description w.r.t. au1xxx-ide changes - fix au1xxx-ide build - fix naming for cmd64*_dma_ops - drop "ide_" and "old_" infixes - s/hpt3xxx_dma_ops/hpt37x_dma_ops/ - s/hpt370x_dma_ops/hpt370_dma_ops/ - use correct DMA ops for HPT302/N, HPT371/N and HPT374 - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/ v3: * Two bugs slipped in v2 (noticed by Sergei): - use correct DMA ops for HPT374 (for real this time) - handle HPT370/HPT370A properly Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: do complete DMA setup in ->init_dma method (take 2)Bartlomiej Zolnierkiewicz2008-04-261-6/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Make ide_hwif_setup_dma() return an error value. * Pass 'const struct ide_port_info *d' instead of 'unsigned long dmabase' to ->init_dma method and make it return an error value. * Rename ide_get_or_set_dma_base() to ide_pci_dma_base(), change ordering of its arguments and then export it. * Export ide_pci_set_master(). * Do complete DMA setup inside ->init_dma method and update ->init_dma users accordingly. * Sanitize code for DMA setup in ide_init_port(). v2: * Fix for CONFIG_BLK_DEV_IDEDMA_PCI=n configs (from Jiri Slaby <jirislaby@gmail.com>): Fix following compiler warning by returning EINVAL: In file included from ANYTHING-INCLUDING-IDE.H:45: include/linux/ide.h: In function ‘ide_hwif_setup_dma’: include/linux/ide.h:1022: warning: no return statement in function returning non-void Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: move ide_setup_dma() call out from ->init_dma methodBartlomiej Zolnierkiewicz2008-04-261-1/+0
| | | | | | | There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: skip DMA initialization completely on revs < 0x20Bartlomiej Zolnierkiewicz2008-04-261-2/+4
| | | | | | | | | Skip DMA initialization completely on revs < 0x20 by setting IDE_HFLAG_NO_DMA host flag and resetting DMA host masks in alim15x3_init_one() (currently ide_hwif_setup_dma() will try to obtain DMA base and setup PCI bus-mastering but init_dma_ali15x3() will fail). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add struct ide_port_ops (take 2)Bartlomiej Zolnierkiewicz2008-04-261-8/+10
| | | | | | | | | | | | | | | | | | | | | * Move hooks for port/host specific methods from ide_hwif_t to 'struct ide_port_ops'. * Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info' and ide_hwif_t. * Update host drivers and core code accordingly. While at it: * Rename ata66_*() cable detect functions to *_cable_detect() to match the standard naming. (Suggested by Sergei Shtylyov) v2: * Fix build for bast-ide. (Noticed by Andrew Morton) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: IDE_HFLAG_BOOTABLE -> IDE_HFLAG_NON_BOOTABLEBartlomiej Zolnierkiewicz2008-04-261-1/+0
| | | | | | | | | "bootable" should be the default behavior so replace IDE_HFLAG_BOOTABLE host flag with IDE_HFLAG_NON_BOOTABLE. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove needless includes from PCI host driversBartlomiej Zolnierkiewicz2008-02-021-1/+0
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ->cable_detect method to ide_hwif_tBartlomiej Zolnierkiewicz2008-02-021-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add ->cable_detect method to ide_hwif_t. * Call the new method in ide_init_port() if: - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78') - DMA initialization was successful (if hwif->dma_base is not set ide_init_port() sets hwif->ultra_mask to zero) - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT') * Convert PCI host drivers to use ->cable_detect method. While at it: * Factor out cable detection to separate functions (if not already done). * hpt366.c/it8213.c/slc90e66.c: - don't check cable type if "idex=ata66" is used * pdc202xx_new.c: - add __devinit tag to pdcnew_cable_detect() * pdc202xx_old.c: - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect() - add __devinit tag to pdc2026x_old_cable_detect() Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: delete filenames/versions from commentsBartlomiej Zolnierkiewicz2008-02-011-2/+0
| | | | | | | | | | | | | | | Delete filenames/versions from comments. I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s to maintainers of the respective drivers. While at it: * Remove unused VERSION define from ide.c. * Remove unused/stale DRV_VERSION define from au1xxx-ide.c. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_tBartlomiej Zolnierkiewicz2008-02-011-4/+5
| | | | | | | | | | | Keep pointer to struct device instead of struct pci_dev in ide_hwif_t. While on it: * Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_CLEAR_SIMPLEX host flagBartlomiej Zolnierkiewicz2008-02-011-2/+5
| | | | | | | | | | | | | | | | | | * Rename 'simplex_stat' variable to 'dma_stat' in ide_get_or_set_dma_base(). * Factor out code for forcing host out of "simplex" mode from ide_get_or_set_dma_base() to ide_pci_clear_simplex() helper. * Add IDE_HFLAG_CLEAR_SIMPLEX host flag and set it in alim15x3 (for M5229), amd74xx (for AMD 7409), cmd64x (for CMD643), generic (for Netcell) and serverworks (for CSB5) host drivers. * Make ide_get_or_set_dma_base() test for IDE_HFLAG_CLEAR_SIMPLEX host flag instead of checking dev->device (BTW the code was buggy because it didn't check for dev->vendor, luckily none of these PCI Device IDs was used by some other vendor for PCI IDE controller). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: ide_setup_dma() assumes 8 portsSergei Shtylyov2008-02-011-1/+1
| | | | | | | | | According to http://marc.info/?l=linux-ide&m=114346138611631, the drivers must always register 8 DMA ports with ide_setup_dma(), so its last argument is not needed. While at it, kill some useless parens in that function... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flagBartlomiej Zolnierkiewicz2008-01-251-3/+0
| | | | | | | | | | | | | | | | | | | | | | * Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide what to do with transfer modes < XFER_PIO_0 in ide_set_xfer_rate(). * Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old, serverworks, tc86c001 and via82cxxx) and cleanup ->set_dma_mode methods in host drivers that don't (IDE core code guarantees that ->set_dma_mode will be called only for modes which are present in SWDMA/MWDMA/UDMA masks). While at it: * Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in hpt34x/hpt366/pdc202xx_old/serverworks host driver. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: add Mitac 8317 and derivatives to ali_cable_override()Bartlomiej Zolnierkiewicz2007-11-271-0/+5
| | | | | | | | Port of Alan's patch for pata_ali.c. Cc: Alan Cox <alan@redhat.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: constify struct ide_port_infoBartlomiej Zolnierkiewicz2007-10-201-1/+1
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: replace ide_pci_device_t by struct ide_port_infoBartlomiej Zolnierkiewicz2007-10-201-2/+2
| | | | | | | | | | | | | | | | * Rename struct ide_pci_device_s to struct ide_port_info. * Remove ide_pci_device_t typedef. While at it: * Fix __ide_pci_register_driver() comment. * Fix aec62xx_init_one() comment. * Remove unused 'cds' field from ide_hwgroup_t. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: use ->host_flags and ->udma_mask fields from ide_pci_device_tBartlomiej Zolnierkiewicz2007-10-201-26/+23
| | | | | | | | | | | * Make a local copy of ali15x3_chipset in alim15x3_init_one() and set ->host_flags / ->udma_mask according to the controller capabilities. * Cleanup init_hwif_common_ali15x3(). * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: fix CD_ROM DMA and PIO FIFO settings setupBartlomiej Zolnierkiewicz2007-10-201-29/+31
| | | | | | | | | | | | | | | | * Setup CD_ROM DMA and PIO FIFO settings in init_chipset_ali15x3() instead of ata66_ali15x3(). The latter is called from init_hwif_common_ali15x3() only if DMA base exists (which insists m5529_revision > 0x20). This changes makes CD_ROM DMA / PIO FIFO bits being set only once and also when "idex=ata66" kernel parameter is used. * While at it move also chip_is_1543c_e setup from ata66_ali15x3() to init_chipset_ali15x3() and check if isa_dev exists before accessing it. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: set drive->autotune in ide_pci_setup_ports()Bartlomiej Zolnierkiewicz2007-10-191-3/+0
| | | | | | | | | | | | | | | | | | | | | | | Majority of host drivers using IDE PCI layer set drive->autotune, the only exceptions are: generic.c ns87415.c rz1000.c trm290.c * no ->set_pio_mode method it821x.c: * if memory allocation fails drive->autotune won't be set (but there also won't be ->set_pio_mode method in such case) piix.c: * MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method) However if there is no ->set_pio_mode method there are no changes in behavior w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: always tune PIOBartlomiej Zolnierkiewicz2007-10-191-5/+5
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t (take 2)Bartlomiej Zolnierkiewicz2007-10-191-7/+6
| | | | | | | | | | | | | | | | | | | | | | | * Add ->mwdma_mask and ->swdma_mask to ide_pci_device_t. * Set ide_hwif_t DMA masks using DMA masks from ide_pci_device_t in setup-pci.c::ide_pci_setup_ports() (iff DMA base is valid and ->init_hwif method may still override them). * Convert IDE PCI host drivers to use ide_pci_device_t DMA masks. While at it: * Use ATA_{UDMA,MWDMA,SWDMA}* defines. * hpt34x.c: add separate ide_pci_device_t instances for HPT343 and HPT345. * serverworks.c: fix DMA masks being set before checking DMA base. v2: * Add missing masks to DECLARE_GENERIC_PCI_DEV() macro. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flagsBartlomiej Zolnierkiewicz2007-10-191-1/+2
| | | | | | | | | Add IDE_HFLAG_NO_LBA48[_DMA] host flags, use it instead of hwif->no_lba48[_dma] and then remove no longer needed hwif->no_lba48[_dma]. As a side-effect this change fixes hwif->no_lba48_dma not being restored by ide_hwif_restore(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_NO_{DMA,AUTODMA} host flagsBartlomiej Zolnierkiewicz2007-10-191-1/+0
| | | | | | | | Add IDE_HFLAG_NO_{DMA,AUTODMA} host flags. Convert all host drivers using ide_pci_device_t to use these flags instead of d->autodma and then remove no longer needed d->autodma. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_BOOTABLE host flagBartlomiej Zolnierkiewicz2007-10-191-1/+1
| | | | | | | | Add IDE_HFLAG_BOOTABLE host flag and IDE_HFLAG_OFF_BOARD define. Convert all host drivers using ide_pci_device_t to use IDE_HFLAG_{BOOTABLE,OFF_BOARD} instead of d->bootable and then remove no longer needed d->bootable. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_NO_ATAPI_DMA host flagBartlomiej Zolnierkiewicz2007-10-191-2/+2
| | | | | | | Add IDE_HFLAG_NO_ATAPI_DMA host flag and set it in host drivers which don't support ATAPI DMA. Then remove no longer needed hwif->atapi_dma. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove hwif->autodma and drive->autodmaBartlomiej Zolnierkiewicz2007-10-161-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | * hpt34x.c: disable DMA masks for HPT345 (hwif->autodma is zero so DMA won't be enabled anyway). * trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag (hwif->autodma is zero so DMA won't be enabled anyway). * Check noautodma global variable instead of drive->autodma in ide_tune_dma(). This fixes handling of "ide=nodma" kernel parameter for icside, ide-cris, au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers. * Remove hwif->autodma (it was not checked by IDE core code anyway) and drive->autodma (was set by all host drivers - except HPT345/TRM290 special cases - unless "ide=nodma" was used). While at it: - remove needless printk() from icside.c - remove stale FIXME/comment from ide-probe.c - don't force DMA off if PCI bus-mastering had to be enabled in setup-pci.c (this setting was always later over-ridden by host drivers anyway) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use PCI_VDEVICE() macroBartlomiej Zolnierkiewicz2007-10-161-3/+3
| | | | | | | | | While at it: - make struct pci_device_id tables const - use PCI_DEVICE_ID_ITE_8213 define in it8213.c - fix comment in generic.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ->ide_dma_check (take 2)Bartlomiej Zolnierkiewicz2007-10-161-19/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend on BIOS for programming device/controller for DMA. Set it in cy82c693, generic, ns87415, opti621 and trm290 host drivers. * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520 host driver. * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag. * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check implementations. Fix all places checking for presence of ->ide_dma_check hook to check for ->ide_dma_on instead. * Remove no longer needed code from config_drive_for_dma(). * Make ide_tune_dma() static. v2: * Fix config_drive_for_dma() return values. * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding dummy config_drive_for_dma() inline. * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check(). * Fix init_hwif_it8213() comment. There should be no functionality changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove drive->init_speed zeroingBartlomiej Zolnierkiewicz2007-10-161-2/+0
| | | | | | | | Several host drivers used to reset drive->init_speed in their ->ide_dma_check implementations which resulted in incorrect init speed being reported to the user, fix it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: remove redundant m5229_revision checkBartlomiej Zolnierkiewicz2007-10-131-12/+13
| | | | | | | | | | init_dma_ali15x3() guarantees that hwif->dma_base will never be set for m5229_revision < 0x20 so remove redundant m5229_revision >= 0x20 check from init_hwif_common_ali15x3(). While at it remove incorrect comment. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: move ide_config_drive_speed() calls to upper layers (take 2)Bartlomiej Zolnierkiewicz2007-10-131-25/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16. * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program the host for the transfer mode after programming the device. Set it in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac and via82cxxx host drivers. * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely skip programming of host/device for the transfer mode ("smart" hosts). Set it in it821x host driver and check it in ide_tune_dma(). * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all direct ->set_pio_mode/->speedproc users to use these helpers. * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc methods to callers. * Rename ->speedproc method to ->set_dma_mode, make it void and update all implementations accordingly. * Update ide_set_xfer_rate() comments. * Unexport ide_config_drive_speed(). v2: * Fix issues noticed by Sergei: - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt to setting DMA modes from sc1200_set_pio_mode() to do_special() - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma() - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode() - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode() - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL - don't set ->set_{pio,dma}_mode on it821x in "smart" mode - fix build problem in pmac.c - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c - improve patch description Changes in behavior caused by this patch: - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change PIO mode if it821x controller is in "smart" mode - removal of two debugging printk-s (from cs5530.c and sc1200.c) - transfer modes 0x00-0x07 passed from user space may be programmed twice on the device (not really an issue since 0x00 is not supported correctly by any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2007-10-111-25/+22
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (24 commits) ide: use only ->set_pio_mode method for programming PIO modes (take 2) sis5513: don't change UDMA settings when programming PIO it8213/piix/slc90e66: don't change DMA settings when programming PIO alim15x3: PIO mode setup fixes siimage: fix ->set_pio_mode method to select PIO data transfer cs5520: don't enable VDMA in ->speedproc sc1200: remove redundant warning message from sc1200_tune_chipset() ide-pmac: PIO mode setup fixes (take 3) icside: fix ->speedproc to return on unsupported modes (take 5) sgiioc4: use ide_tune_dma() amd74xx/via82cxxx: use ide_tune_dma() ide: add ide_set{_max}_pio() (take 4) ide: Kconfig face-lift ide: move ide_rate_filter() calls to the upper layer (take 2) sis5513: add ->udma_filter method for chipset_family >= ATA_133 ide: mode limiting fixes for user requested speed changes ide: add missing ide_rate_filter() calls to ->speedproc()-s ide: call udma_filter() before resorting to the UltraDMA mask ide: make jmicron match vendor and device class pdc202xx_new: switch to using pci_get_slot() (take 2) ...
| * ide: use only ->set_pio_mode method for programming PIO modes (take 2)Bartlomiej Zolnierkiewicz2007-10-111-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Use ->set_pio_mode method to program PIO modes in ide_set_xfer_rate() (the only place which used ->speedproc to program PIO modes) and remove handling of PIO modes from all ->speedproc implementations. v2: * Fix pmac_ide_tune_chipset() comment. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * alim15x3: PIO mode setup fixesBartlomiej Zolnierkiewicz2007-10-111-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Return failure in ->speedproc method for unsupported/invalid transfer modes passed from user-space (fixes theoretical OOPS in ali_tune_pio() and/or setting random PIO timings on host controller + disabling UDMA bit + setting unsupported/invalid transfer mode on the device). * Don't disable UDMA bit when programming PIO modes. * Add FIXME about DMA timings never being set. * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide: add ide_set{_max}_pio() (take 4)Bartlomiej Zolnierkiewicz2007-10-111-19/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags and set them in ht6560, cmd640, cmd64x and sc1200 host drivers. * Add set_pio_mode_abuse() for checking if host driver has a non-standard ->tuneproc() implementation and use it in do_special(). * Add ide_set_pio() for setting PIO mode (it uses hwif->pio_mask to find the maximum PIO mode supported by the host), also add ide_set_max_pio() wrapper for ide_set_pio() to use for auto-tuning. Convert users of ->tuneproc to use ide_set{_max}_pio() where possible. This leaves only do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as a direct users of ->tuneproc. * Remove no longer needed ide_get_best_pio_mode() calls and printk-s reporting PIO mode selected from ->tuneproc implementations. * Rename ->tuneproc hook to ->set_pio_mode and make 'pio' argument const. * Remove stale comment from ide_config_drive_speed(). v2: * Fix "ata_" prefix (Noticed by Jeff). v3: * Minor cleanups/fixups per Sergei's suggestions. v4: * Fix compile problem in drivers/ide/pci/cmd640.c (Noticed by Andrew Morton). * Improve some ->set_pio_mode comments. Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide: move ide_rate_filter() calls to the upper layer (take 2)Bartlomiej Zolnierkiewicz2007-10-111-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Move ide_rate_filter() calls from host drivers to IDE core. * Make ide_rate_filter() static. * Make 'speed' argument of ->speedproc const. v2: * Fix it8213_tune_chipset() comment. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | drivers/firmware: const-ify DMI API and internalsJeff Garzik2007-10-091-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_ali/alim15x3: override 80-wire cable detection for Toshiba S1800-814Daniel Exner2007-09-111-0/+7
| | | | | | | | | | Add Toshiba S1800-814 to whitelist for both pata_ali and alim15x3, as it is correctly detected as 40-wire connected but this cable is short enough to still use transfer modes higher than UDMA33. Signed-off-by: Daniel Exner <dex@dragonslave.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: Correct HP detectBartlomiej Zolnierkiewicz2007-08-011-1/+1
| | | | | | | Direct port of Alan's fix for pata_ali. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add PIO masksBartlomiej Zolnierkiewicz2007-07-201-0/+1
| | | | | | | | | | | | | * Add ATA_PIO[0-6] defines to <linux/ata.h>. * Add ->pio_mask field to ide_pci_device_t and ide_hwif_t. * Add PIO masks to host drivers. <linux/ata.h> change ACK-ed by Jeff Garzik <jeff@garzik.org>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: drop "PIO data" argument from ide_get_best_pio_mode()Bartlomiej Zolnierkiewicz2007-07-201-2/+1
| | | | | | | | | | * Drop no longer needed "PIO data" argument from ide_get_best_pio_mode() and convert all users accordingly. * Remove no longer needed ide_pio_data_t. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_pci_device_t.host_flags (take 2)Bartlomiej Zolnierkiewicz2007-07-201-1/+0
| | | | | | | | | | | | | | | | | | * Rename ide_pci_device_t.flags to ide_pci_device_t.host_flags and IDEPCI_FLAG_ISA_PORTS flag to IDE_HFLAG_ISA_PORTS. * Add IDE_HFLAG_SINGLE flag for single channel devices. * Convert core code and all IDE PCI drivers to use IDE_HFLAG_SINGLE and remove no longer needed ide_pci_device_t.channels field. v2: * Fix issues noticed by Sergei: - correct code alignment in scc_pata.c - s/IDE_HFLAG_SINGLE/~IDE_HFLAG_SINGLE/ in serverworks.c Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* PCI: Change all drivers to use pci_device->revisionAuke Kok2007-07-111-1/+1
| | | | | | | | | | | | | | | | | | | | Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* alim15x3: backport short cables support from pata_ali.cBartlomiej Zolnierkiewicz2007-07-091-23/+48
| | | | | | | | | | Backport short cables support from pata_ali.c and while at it cleanup existing cable detection code. This patch should allow UDMA > 2 modes on HP Pavilion N5430 and Fujitsu P2000. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
* ide: add short cables supportBartlomiej Zolnierkiewicz2007-07-091-4/+5
| | | | | | | | | | | | | | | | | | | | | | This patch allows users to override both host and device side cable detection with "ideX=ata66" kernel parameter. Thanks to this it should be now possible to use UDMA > 2 modes on systems (laptops mainly) which use short 40-pin cable instead of 80-pin one. Next patches add automatic detection of some systems using short cables. Changes: * Rename hwif->udma_four to hwif->cbl and make it u8. * Convert all existing users accordingly (use ATA_CBL_* defines while at it). * Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three(). * Use ATA_CBL_PATA40_SHORT for "ideX=ata66" kernel parameter. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
* alim15x3: use ide_tune_dma()Bartlomiej Zolnierkiewicz2007-05-161-62/+7
| | | | | | | | | | | | | Use ide_tune_dma() in ali15x3_config_drive_for_dma() and remove all the open coded DMA tuning code and also config_chipset_for_dma(). Set ->atapi_dma flag correctly in init_hwif_common_ali15x3() so ide_tune_dma() can take care of checking if ATAPI DMA is allowed and remove open coded ATAPI DMA check from ali15x3_config_drive_for_dma(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: make /proc/ide/ optionalBartlomiej Zolnierkiewicz2007-05-101-4/+4
| | | | | | | | | | | | | All important information/features should be already available through sysfs and ioctl interfaces. Add CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option, disabling it makes IDE driver ~5 kB smaller (on x86-32). While at it add CONFIG_PROC_FS=n versions of proc_ide_{create,destroy}() and remove no longer needed #ifdefs. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: rework the code for selecting the best DMA transfer mode (v3)Bartlomiej Zolnierkiewicz2007-05-101-59/+17
| | | | | | | | | | | | | | | | | | | | | | | | | Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
OpenPOWER on IntegriCloud