summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
Commit message (Collapse)AuthorAgeFilesLines
* i2c: Fix Kontron PLD prescaler calculationMichael Brunner2013-08-051-2/+2
| | | | | | | | | | Add some necessary braces that have been removed during driver cleanup. This fixes the I2C prescaler calculation. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i2c-mxs: Use DMA mode even for small transfersFabio Estevam2013-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently we have been seing some reports about PIO mode not working properly. - http://www.spinics.net/lists/linux-i2c/msg11985.html - http://marc.info/?l=linux-i2c&m=137235593101385&w=2 - https://lkml.org/lkml/2013/6/24/430 Let's use DMA mode even for small transfers. Without this patch, i2c reads the incorrect sgtl5000 version on a mx28evk when touchscreen is enabled: [ 5.856270] sgtl5000 0-000a: Device with ID register 0 is not a sgtl5000 [ 9.877307] sgtl5000 0-000a: ASoC: failed to probe CODEC -19 [ 9.883528] mxs-sgtl5000 sound.12: ASoC: failed to instantiate card -19 [ 9.892955] mxs-sgtl5000 sound.12: snd_soc_register_card failed (-19) Cc: <stable@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Marek Vasut <marex@denx.de> [wsa: we have a proper solution for -next, so this non intrusive solution is OK for now] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-07-131-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
| * MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOCDavid Daney2013-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON. This allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC. Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can get the same configuration with CAVIUM_OCTEON_SOC. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-edac@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: netdev@vger.kernel.org Cc: spi-devel-general@lists.sourceforge.net Cc: devel@driverdev.osuosl.org Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/5295/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Merge branch 'i2c/for-next' of ↵Linus Torvalds2013-07-0422-1387/+1212
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new drivers: Kontron PLD, Wondermedia VT - mv64xxx driver gained sun4i support and a bigger cleanup - duplicate driver 'intel-mid' removed - added generic device tree binding for sda holding time (and designware driver already uses it) - we tried to allow driver probing with only device tree and no i2c ids, but I had to revert it because of side effects. Needs some rethinking. - driver bugfixes, cleanups... * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c-designware: use div_u64 to fix link i2c: Kontron PLD i2c bus driver i2c: iop3xxx: fix build failure after waitqueue changes i2c-designware: make SDA hold time configurable i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided i2c: imx: allow autoloading on dt ids i2c: mv64xxx: Fix transfer error code i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs i2c: omap: correct usage of the interrupt enable register i2c-pxa: prepare clock before use Revert "i2c: core: make it possible to match a pure device tree driver" i2c: nomadik: allocate adapter number dynamically i2c: nomadik: support elder Nomadiks i2c: mv64xxx: Add Allwinner sun4i compatible i2c: mv64xxx: make the registers offset configurable i2c: mv64xxx: Add macros to access parts of registers i2c: vt8500: Add support for I2C bus on Wondermedia SoCs i2c: designware: fix race between subsequent xfers i2c: bfin-twi: Read and write the FIFO in loop i2c: core: make it possible to match a pure device tree driver ...
| * | i2c-designware: use div_u64 to fix linkVincent Stehlé2013-07-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following link error: drivers/built-in.o: In function `dw_i2c_probe': of_iommu.c:(.text+0x18c8f0): undefined reference to `__aeabi_uldivmod' make: *** [vmlinux] Error 1 Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Tested-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Christian Ruppert <christian.ruppert@abilis.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: Kontron PLD i2c bus driverKevin Strasser2013-07-013-0/+421
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i2c support for the on-board PLD found on some Kontron embedded modules. Originally-From: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: iop3xxx: fix build failure after waitqueue changesKevin Hilman2013-07-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There has long been a syntax problem in iop3xx_i2c_wait_event() which has been somehow hidden by the macros in <linux/wait.h>. After some recent cleanup/rework of the wait_event_* helpers, the bug has come out from hiding and now results in build failure: /work/kernel/next/drivers/i2c/busses/i2c-iop3xx.c: In function 'iop3xx_i2c_wait_event': /work/kernel/next/drivers/i2c/busses/i2c-iop3xx.c:176:143: error: expected ')' before ';' token /work/kernel/next/drivers/i2c/busses/i2c-iop3xx.c:176:157: error: expected ')' before ';' token /work/kernel/next/drivers/i2c/busses/i2c-iop3xx.c:176:213: error: expected ')' before ';' token /work/kernel/next/drivers/i2c/busses/i2c-iop3xx.c:176:291: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] /work/kernel/next/drivers/i2c/busses/i2c-iop3xx.c:176:551: error: expected ')' before ';' token /work/kernel/next/drivers/i2c/busses/i2c-iop3xx.c:176:565: error: expected ')' before ';' token /work/kernel/next/drivers/i2c/busses/i2c-iop3xx.c:176:764: error: expected ')' before ';' token /work/kernel/next/drivers/i2c/busses/i2c-iop3xx.c:176:778: error: expected ')' b Fix by removing stray ';' Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c-designware: make SDA hold time configurableChristian Ruppert2013-06-263-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes the SDA hold time configurable through device tree. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> for arch/arc bits Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not providedGregory CLEMENT2013-06-251-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds checking whether clock-frequency property acquisition has succeeded. If not, the frequency is set to 100kHz by default. The Device Tree binding documentation is updated accordingly. Based on the intials patches from Zbigniew Bodek Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Zbigniew Bodek <zbb@semihalf.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: imx: allow autoloading on dt idsArnaud Patard \(Rtp\)2013-06-251-0/+1
| | | | | | | | | | | | | | | | | | | | | Allow udev to autoload the module when booting with device-tree Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: mv64xxx: Fix transfer error codeGuenter Roeck2013-06-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The driver returns -ENODEV as error code if it did not get an ACK from the device. Per Documentation/i2c/fault-codes, it should return -ENXIO. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDsSeth Heasley2013-06-202-0/+4
| | | | | | | | | | | | | | | | | | | | | This patch adds the i801 SMBus Controller DeviceIDs for the Intel Coleto Creek PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: omap: correct usage of the interrupt enable registerOleksandr Dmytryshyn2013-06-191-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've been lucky not to have any interrupts fire during the suspend path, otherwise we would have unpredictable behaviour in the kernel. Based on the logic of the kernel code interrupts from i2c should be prohibited during suspend. Kernel writes 0 to the I2C_IE register in the omap_i2c_runtime_suspend() function. In the other side kernel writes saved interrupt flags to the I2C_IE register in omap_i2c_runtime_resume() function. I.e. interrupts should be disabled during suspend. This works for chips with version1 registers scheme. Interrupts are disabled during suspend. For chips with version2 scheme registers writting 0 to the I2C_IE register does nothing (because now the I2C_IRQENABLE_SET register is located at this address). This register is used to enable interrupts. For disabling interrupts I2C_IRQENABLE_CLR register should be used. Because the registers I2C_IRQENABLE_SET and I2C_IE have the same addresses, the interrupt enabling procedure is unchanged. I've checked that interrupts in the i2c controller are still enabled after writting 0 to the I2C_IRQENABLE_SET register. With this patch interrupts are disabled in the omap_i2c_runtime_suspend() function. Patch is based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git tag: v3.10-rc2 Verified on OMAP4430. Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c-pxa: prepare clock before useDaniel Drake2013-06-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On OLPC XO-1.75 (MMP2), a WARN_ON() was occurring during boot since the clock being enabled by i2c-pxa had not been prepared. Use clk_prepare_enable() to ensure that the prepare operation has taken place, and use clk_disable_unprepare() in the matching shutdown paths. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | Revert "i2c: core: make it possible to match a pure device tree driver"Wolfram Sang2013-06-181-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit c80f52847c50109ca248c22efbf71ff10553dca4. Regressions have been found and also run time based instantiation would fail. We need more thoughts on this. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: nomadik: allocate adapter number dynamicallyLinus Walleij2013-06-151-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Nomadik I2C was using a local atomic counter to number the I2C adapters. This does not work on configurations where you also add, say a GPIO bit-banged adapter to the system. They will start to conflict about being adapter 0. There is no reason to use the numbered adapter function, and the semantic effect on systems with only Nomadik I2C blocks will be none - instead of increasing the number atomically in the driver itself, it is done in the I2C core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: nomadik: support elder NomadiksLinus Walleij2013-06-151-2/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Nomadik I2C block was introduced with the Nomadik STn8815 SoC (the STn8810 incidentally is identical to the one named i2c-stu300.c). However as developments have only been tested on the DB8500 family, it was not properly working with the STn8815 anymore. Rectify this by adding some vendor variant data in the same manner as other PrimeCells, and switch code path depending on version. Tested on the S8815 Nomadik dongle. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: mv64xxx: Add Allwinner sun4i compatibleMaxime Ripard2013-06-152-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the compatible string for the Allwinner A10 i2c controller and the associated register layout. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: mv64xxx: make the registers offset configurableMaxime Ripard2013-06-151-39/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Allwinner i2c controller uses the same logic as the Marvell one, but with slightly different register offsets. Introduce a structure that will be passed by either the pdata or associated to the compatible strings, and that holds the various registers that might be needed. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: mv64xxx: Add macros to access parts of registersMaxime Ripard2013-06-151-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These macros make it more comprehensive to access to useful masked and shifted area of the various registers used. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: vt8500: Add support for I2C bus on Wondermedia SoCsTony Prisk2013-06-153-0/+490
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the I2C bus controllers found on Wondermedia 8xxx-series SoCs. Only master-mode is supported. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> [wsa: fixed one macro to shift 8 instead of 16] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: designware: fix race between subsequent xfersChristian Ruppert2013-06-151-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The designware block is not always properly disabled in the case of transfer errors. Interrupts from aborted transfers might be handled after the data structures for the following transfer are initialised but before the hardware is set up. This can corrupt the data structures to the point that the system is stuck in an infinite interrupt loop (where FIFOs are never emptied because dev->msg_read_idx == dev->msgs_num). This patch cleanly disables the designware-i2c hardware at the end of every transfer, be it successful or not. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> [wsa: extended the comment] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: bfin-twi: Read and write the FIFO in loopSonic Zhang2013-06-121-20/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TWI transfer interrupts may be lost when system is heavily handling other interrupts, while current transfer handler depends on each accurate interrupt and misses some data in this case. Because there are 2 2-byte FIFOs in blackfin TWI controller, the occurrence of the data loss can be reduced by reading till the RX FIFO is empty and writing till the TX FIFO is full. Reported-by: Bob Maris <mail@maris-ee.eu> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: core: make it possible to match a pure device tree driverLinus Walleij2013-06-121-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This tries to address an issue found when writing an MFD driver for the Nomadik STw481x PMICs: as the platform is using device tree exclusively I want to specify the driver matching like this: static const struct of_device_id stw481x_match[] = { { .compatible = "st,stw4810", }, { .compatible = "st,stw4811", }, {}, }; static struct i2c_driver stw481x_driver = { .driver = { .name = "stw481x", .of_match_table = stw481x_match, }, .probe = stw481x_probe, .remove = stw481x_remove, }; However that turns out not to be possible: the I2C probe code is written so that the probe() call is always passed a match from i2c_match_id() using non-devicetree matches. This is probably why most devices using device tree for I2C clients currently will pass no .of_match_table *at all* but instead just use .id_table from struct i2c_driver to match the device. As you realize that means that the whole idea with compatible strings is discarded, and that is why we find strange device tree I2C device compatible strings like "product" instead of "vendor,product" as you could expect. Let's figure out how to fix this before the mess spreads. This patch will allow probeing devices with only an of_match_table as per above, and will pass NULL as the second argument to the probe() function. If the driver wants to deduce secondary info from the struct of_device_id .data field, it has to call of_match_device() on its own match table in the probe function device tree probe path. If drivers define both an .of_match_table *AND* a i2c_driver .id_table, the .of_match_table will take precedence, just as is done in the i2c_device_match() function in i2c-core.c. I2C devices probed from device tree should subsequently be fixed to handle the case where of_match_table() is used (I think none of them do that today), and platforms should fix their device trees to use compatible strings for I2C devices instead of setting the name to Linux device driver names as is done in multiple cases today. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: use platform_{get,set}_drvdata()Jingoo Han2013-06-123-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | drivers/i2c/busses: don't check resource with devm_ioremap_resourceWolfram Sang2013-06-125-32/+5
| | | | | | | | | | | | | | | | | | | | | devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: designware: prevent signals from aborting I2C transfersMika Westerberg2013-06-121-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a process receives signal while it is waiting for I2C transfer to complete, an error is returned to the caller and the transfer is aborted. This can cause the driver to fail subsequent transfers. Also according to commit d295a86eab2 (i2c: mv64xxx: work around signals causing I2C transactions to be aborted) I2C drivers aren't supposed to abort transactions on signals. To prevent this switch to use wait_for_completion_timeout() instead of wait_for_completion_interruptible_timeout() in the designware I2C driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: mxs: Let device core handle pinctrlFabio Estevam2013-06-121-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for handling pinctrl. So remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: imx: Let device core handle pinctrlFabio Estevam2013-06-121-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for handling pinctrl. So remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | I2C: mv64xxx: fix race between FSM/interrupt and process contextRussell King2013-06-051-20/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Asking for a multi-part message to be handled by this driver is racy; it has been observed that the following sequence is possible with this driver: - send start - send address + write - send data - send (repeated) start - send address + write - send (repeated) start - send address + read - unrecoverable bus hang (except by system reset) The problem is that the interrupt handling sees the next event after the first repeated start is sent - the IFLG bit is set in the register even though INTEN is disabled. Let's fix this by moving all of the message processing into interrupt context, rather than having it partly in IRQ and partly in process context. This allows us to move immediately to the next message in the interrupt handler and get on with the transfer, rather than incuring a couple of scheduling switches to get the next message. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | I2C: mv64xxx: move mv64xxx_i2c_prepare_for_io()Russell King2013-06-051-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move mv64xxx_i2c_prepare_for_io() higher up in the driver to avoid a future forward declaration for this function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | I2C: mv64xxx: remove I2C_M_NOSTART codeRussell King2013-06-051-21/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As this driver does not advertise protocol mangling support (I2C_FUNC_PROTOCOL_MANGLING is not set), having code to act on I2C_M_NOSTART is illogical, and in any case isn't supportable on anything but the first message - which makes no sense. Remove the I2C_M_NOSTART code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | I2C: mv64xxx: fix error handling for request_irq()Russell King2013-06-051-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Propagate the error code from request_irq() rather than ignoring it entirely. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | I2C: mv64xxx: use devm_kzalloc()Russell King2013-06-051-14/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | As we're changing to using devm_* APIs to fix various problems in this driver, lets also do devm_kzalloc() while we're here too. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | I2C: mv64xxx: use devm_clk_get() to avoid missing clk_put()Russell King2013-06-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver forgets to use clk_put(). Rather than adding clk_put(), lets instead use devm_clk_get() to obtain this clock so that it's automatically handled on cleanup. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | I2C: mv64xxx: use devm_ioremap_resource()Russell King2013-06-051-40/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eliminate reg_base_p and reg_size, mv64xxx_i2c_unmap_regs() and an unchecked ioremap() return from this driver by using the devm_* API for requesting and ioremapping resources. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | I2C: mv64xxx: use return value from mv64xxx_i2c_map_regs()Russell King2013-06-051-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | mv64xxx_i2c_map_regs() already returns an error code, so lets propagate that to mv64xxx_i2c_probe()'s caller. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: intel-mid: remove obsolete driverAndy Shevchenko2013-06-053-1132/+0
| |/ | | | | | | | | | | | | | | | | Moorestown support is removed from kernel and Medfield is supported by i2c-designware-pci. But i2c-intel-mid is still in upstream and community resources are wasted to maintain it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | Merge branch 'next' of ↵Linus Torvalds2013-07-041-0/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc changes for the 3.11 merge window. In addition to the usual bug fixes and small updates, the main highlights are: - Support for transparent huge pages by Aneesh Kumar for 64-bit server processors. This allows the use of 16M pages as transparent huge pages on kernels compiled with a 64K base page size. - Base VFIO support for KVM on power by Alexey Kardashevskiy - Wiring up of our nvram to the pstore infrastructure, including putting compressed oopses in there by Aruna Balakrishnaiah - Move, rework and improve our "EEH" (basically PCI error handling and recovery) infrastructure. It is no longer specific to pseries but is now usable by the new "powernv" platform as well (no hypervisor) by Gavin Shan. - I fixed some bugs in our math-emu instruction decoding and made it usable to emulate some optional FP instructions on processors with hard FP that lack them (such as fsqrt on Freescale embedded processors). - Support for Power8 "Event Based Branch" facility by Michael Ellerman. This facility allows what is basically "userspace interrupts" for performance monitor events. - A bunch of Transactional Memory vs. Signals bug fixes and HW breakpoint/watchpoint fixes by Michael Neuling. And more ... I appologize in advance if I've failed to highlight something that somebody deemed worth it." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits) pstore: Add hsize argument in write_buf call of pstore_ftrace_call powerpc/fsl: add MPIC timer wakeup support powerpc/mpic: create mpic subsystem object powerpc/mpic: add global timer support powerpc/mpic: add irq_set_wake support powerpc/85xx: enable coreint for all the 64bit boards powerpc/8xx: Erroneous double irq_eoi() on CPM IRQ in MPC8xx powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig powerpc/mpic: Add get_version API both for internal and external use powerpc: Handle both new style and old style reserve maps powerpc/hw_brk: Fix off by one error when validating DAWR region end powerpc/pseries: Support compression of oops text via pstore powerpc/pseries: Re-organise the oops compression code pstore: Pass header size in the pstore write callback powerpc/powernv: Fix iommu initialization again powerpc/pseries: Inform the hypervisor we are using EBB regs powerpc/perf: Add power8 EBB support powerpc/perf: Core EBB support for 64-bit book3s powerpc/perf: Drop MMCRA from thread_struct powerpc/perf: Don't enable if we have zero events ...
| * | i2c-cpm: Fix to takeback i2c bus master-ship after a collisionSachin Surendran2013-06-251-0/+8
| |/ | | | | | | | | | | | | | | | | | | | | | | In case of collision on i2c bus the controller which lost bus mastership stays as a slave for all subsequent transfers. This results in the i2c controller never writing to the bus for future transactions, resulting in i2c transfer timeouts. This fix checks for a collision on last I2C transaction and sets the I2COM_MASTER bit for the new transaction. Signed-off-by: Sachin Surendran <sachin.surendran@alliedtelesis.co.nz> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | Merge tag 'pci-v3.11-changes' of ↵Linus Torvalds2013-07-032-1/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "PCI device hotplug - Add pci_alloc_dev() interface (Gu Zheng) - Add pci_bus_get()/put() for reference counting (Jiang Liu) - Fix SR-IOV reference count issues (Jiang Liu) - Remove unused acpi_pci_roots list (Jiang Liu) MSI - Conserve interrupt resources on x86 (Alexander Gordeev) AER - Force fatal severity when component has been reset (Betty Dall) - Reset link below Root Port as well as Downstream Port (Betty Dall) - Fix "Firmware first" flag setting (Bjorn Helgaas) - Don't parse HEST for non-PCIe devices (Bjorn Helgaas) ASPM - Warn when we can't disable ASPM as driver requests (Bjorn Helgaas) Miscellaneous - Add CircuitCo PCI IDs (Darren Hart) - Add AMD CZ SATA and SMBus PCI IDs (Shane Huang) - Work around Ivytown NTB BAR size issue (Jon Mason) - Detect invalid initial BAR values (Kevin Hao) - Add pcibios_release_device() (Sebastian Ott) - Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)" * tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci PCI: Add CircuitCo vendor ID and subsystem ID PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) PCI: Return early on allocation failures to unindent mainline code PCI: Simplify IOV implementation and fix reference count races PCI: Drop redundant setting of bus->is_added in virtfn_add_bus() unicore32/PCI: Remove redundant call of pci_bus_add_devices() m68k/PCI: Remove redundant call of pci_bus_add_devices() PCI / ACPI / PM: Use correct power state strings in messages PCI: Fix comment typo for pcie_pme_remove() PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev() PCI: Fix refcount issue in pci_create_root_bus() error recovery path ia64/PCI: Clean up pci_scan_root_bus() usage PCI/AER: Reset link for devices below Root Port or Downstream Port ACPI / APEI: Force fatal AER severity when component has been reset PCI/AER: Remove "extern" from function declarations PCI/AER: Move AER severity defines to aer.h PCI/AER: Set dev->__aer_firmware_first only for matching devices PCI/AER: Factor out HEST device type matching PCI/AER: Don't parse HEST table for non-PCIe devices ...
| * | i2c-piix4: Add AMD CZ SMBus device IDShane Huang2013-06-032-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To add AMD CZ SMBus controller device ID. [bhelgaas: drop pci_ids.h update] Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org
* | | Merge tag 'pm+acpi-3.11-rc1' of ↵Linus Torvalds2013-07-031-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
| * | | PM / Runtime: Rework the "runtime idle" helper routineRafael J. Wysocki2013-06-031-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "runtime idle" helper routine, rpm_idle(), currently ignores return values from .runtime_idle() callbacks executed by it. However, it turns out that many subsystems use pm_generic_runtime_idle() which checks the return value of the driver's callback and executes pm_runtime_suspend() for the device unless that value is not 0. If that logic is moved to rpm_idle() instead, pm_generic_runtime_idle() can be dropped and its users will not need any .runtime_idle() callbacks any more. Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle() routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and ata_port_runtime_idle(), respectively, as well as a few drivers' ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has been returned by the .runtime_idle() callback executed by it. To reduce overall code bloat, make the changes described above. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu>
* | | Merge tag 'pinctrl-for-v3.11-1' of ↵Linus Torvalds2013-07-031-80/+10
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile
| * | | i2c: nomadik: use pinctrl PM helpersLinus Walleij2013-06-161-80/+10
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This utilize the new pinctrl core PM helpers to transition the driver to "sleep" and "idle" states, cutting away some boilerplate code. Cc: Hebbar Gururaja <gururaja.hebbar@ti.com> Cc: Mark Brown <broonie@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | Merge tag 'soc-for-linus' of ↵Linus Torvalds2013-07-021-3/+13
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
| * \ \ Merge tag 'u300-multiplatform' of ↵Arnd Bergmann2013-06-201-3/+13
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc From Linus Walleij: Device Tree and Multiplatform support for U300: - Add devicetree support to timer, pinctrl (probe), I2C block, watchdog, DMA controller and clocks. - Piecewise add a device tree containing all peripherals. - Delete the ATAG boot path. - Delete redundant platform data and board files. - Convert to multiplatform. * tag 'u300-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (40 commits) ARM: u300: switch to using syscon regmap for board ARM: u300: Update MMC configs for u300 defconfig spi: pl022: use DMA by default when probing from DT pinctrl: get rid of all platform data for coh901 ARM: u300: convert MMC/SD clock to device tree ARM: u300: move the gated system controller clocks to DT i2c: stu300: do not request a specific clock name clk: move the U300 fixed and fixed-factor to DT ARM: u300: remove register definition file ARM: u300: add syscon node ARM: u300 use module_spi_driver to register driver ARM: u300: delete remnant machine headers ARM: u300: convert to multiplatform ARM: u300: localize <mach/u300-regs.h> ARM: u300: delete <mach/irqs.h> ARM: u300: delete <mach/hardware.h> ARM: u300: push down syscon registers ARM: u300: remove deps from debug macro ARM: u300: move debugmacro to debug includes ARM: u300: delete all static board data ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | i2c: stu300: do not request a specific clock nameLinus Walleij2013-06-171-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have used the default clock associated with the block for a long time, only heuristics in the clock system has made this work anyway. This needs to be done away with as we start probing this driver and its clocks exclusively from the device tree. Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
OpenPOWER on IntegriCloud