summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/muxes
Commit message (Collapse)AuthorAgeFilesLines
* i2c: pca954x: Fix compilation without CONFIG_GPIOLIBLaurent Pinchart2014-06-051-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pca954x driver recently switched to the GPIO descriptor API without including the correct <linux/gpio/consumer.h> header. This breaks compilation without CONFIG_GPIOLIB. drivers/i2c/muxes/i2c-mux-pca954x.c: In function ‘pca954x_probe’: drivers/i2c/muxes/i2c-mux-pca954x.c:204:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration] gpio = devm_gpiod_get(&client->dev, "reset"); ^ drivers/i2c/muxes/i2c-mux-pca954x.c:204:7: warning: assignment makes pointer from integer without a cast [enabled by default] gpio = devm_gpiod_get(&client->dev, "reset"); ^ drivers/i2c/muxes/i2c-mux-pca954x.c:206:3: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration] gpiod_direction_output(gpio, 0); ^ cc1: some warnings being treated as errors make[3]: *** [drivers/i2c/muxes/i2c-mux-pca954x.o] Error 1 Fix it by including the right header. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: mux: pca954x: Use the descriptor-based GPIO APILaurent Pinchart2014-06-031-16/+5
| | | | | | | | | | | | | The ID-based GPIO API pushes handling of GPIO polarity to drivers. Simplify the driver by switching to the descriptor-based GPIO API. This also fixes a mismatch between the pca954x DT bindings that document a "reset-gpios" property and the driver that requests a "reset-gpio" property. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c/for-current' of ↵Linus Torvalds2014-01-295-5/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Mostly bugfixes, small but wanted cleanups, and Paul's init.h removal applied" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rcar: fix NACK error code i2c: update i2c_algorithm documentation i2c: rcar: use devm_clk_get to ensure clock is properly ref-counted i2c: rcar: do not print error if device nacks transfer i2c: rely on driver core when sanitizing devices i2c: delete non-required instances of include <linux/init.h> i2c: acorn: is tristate and should use module.h i2c: piix4: Standardize log messages i2c: piix4: Use different message for AMD Auxiliary SMBus Controller i2c: piix4: Add support for AMD ML and CZ SMBus changes
| * i2c: delete non-required instances of include <linux/init.h>Paul Gortmaker2014-01-245-5/+0
| | | | | | | | | | | | | | | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2014-01-291-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon updates from Jean Delvare: "This include it87 driver improvements, and a tree-wide change of my e-mail address" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: Update Jean Delvare's e-mail address hwmon: (it87) Print proper names for the IT8771E and IT8772E hwmon: (it87) Add support for the ITE IT8603E
| * Update Jean Delvare's e-mail addressJean Delvare2014-01-291-1/+1
| | | | | | | | Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | i2c: pca954x: Add reset GPIO supportLaurent Pinchart2014-01-031-0/+19
| | | | | | | | | | | | | | | | If a reset GPIO support is specified, request the GPIO and get the chip out of reset at probe time. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: pca954x: Use devm_kzalloc managed allocatorLaurent Pinchart2014-01-031-12/+6
| | | | | | | | | | | | | | This simplifies error and removal paths. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: pca954x: Sort headers alphabeticallyLaurent Pinchart2014-01-031-4/+3
|/ | | | | | | This helps avoiding duplicate includes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c/for-next' of ↵Linus Torvalds2013-11-183-6/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ...
| * i2c: mux: gpio: use reg value for i2c_add_mux_adapterIonut Nicu2013-10-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c-mux driver requires that the chan_id parameter passed to the i2c_add_mux_adapter() function is equal to the reg value for that adapter: for_each_child_of_node(mux_dev->of_node, child) { ret = of_property_read_u32(child, "reg", &reg); if (ret) continue; if (chan_id == reg) { priv->adap.dev.of_node = child; break; } } The i2c-mux-gpio driver uses an internal logical index for chan_id when calling i2c_add_mux_adapter() instead of using the reg value. Because of this, there will problems in selecting the right adapter when the i2c-mux-gpio's index into mux->data.values doesn't match the reg value. An example of such a case: mux->data.values = { 1, 0 } For chan_id = 0, i2c-mux will bind the adapter to the of_node with reg = <0>, but when it will call the select() callback with chan_id set to 0, the i2c-mux-gpio will use it as an index into mux->data.values and it will actually select the bus with reg = <1>. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
| * i2c: mux: gpio: use gpio_set_value_cansleep()Ionut Nicu2013-10-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some gpio chips may have get/set operations that can sleep. gpio_set_value() only works for chips which do not sleep, for the others we will get a kernel warning. Using gpio_set_value_cansleep() will work for both chips that do sleep and those who don't. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
| * i2c: Include linux/of.h headerSachin Kamat2013-10-301-0/+1
| | | | | | | | | | | | | | | | 'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: remove redundant of_match_ptrSachin Kamat2013-10-032-2/+2
| | | | | | | | | | | | | | | | The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: i2c-mux-pinctrl: use deferred probe when adapter not foundWolfram Sang2013-10-101-2/+2
| | | | | | | | | | | | If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not foundWolfram Sang2013-10-101-1/+1
| | | | | | | | | | | | If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: i2c-mux-gpio: use deferred probingIonut Nicu2013-10-101-2/+2
| | | | | | | | | | | | | | | | | | | | If the i2c-parent bus driver is not loaded, returning -ENODEV will force people to unload and then reload the module again to get it working. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errorsIonut Nicu2013-10-101-3/+7
|/ | | | | | | | | | of_get_named_gpio could return -E_PROBE_DEFER or another error code. This error should be passed further instead of being ignored. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: move OF helpers into the coreWolfram Sang2013-08-233-3/+0
| | | | | | | | | | I2C of helpers used to live in of_i2c.c but experience (from SPI) shows that it is much cleaner to have this in the core. This also removes a circular dependency between the helpers and the core, and so we can finally register child nodes in the core instead of doing this manually in each driver. So, fix the drivers and documentation, too. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: use dev_get_platdata()Jingoo Han2013-08-195-7/+9
| | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2013-05-091-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
| * Convert selectors of GENERIC_GPIO to GPIOLIBAlexandre Courbot2013-04-161-1/+1
| | | | | | | | | | | | | | | | | | GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* | i2c: mux: Add i2c-arb-gpio-challenge 'mux' driverDoug Anderson2013-04-173-0/+265
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c-arb-gpio-challenge driver implements an I2C arbitration scheme where masters need to claim the bus with a GPIO before they can start a transaction. This should generally only be used when standard I2C multimaster isn't appropriate for some reason (errata/bugs). This driver is based on code that Simon Glass added to the i2c-s3c2410 driver in the Chrome OS kernel 3.4 tree. The current incarnation as a mux driver is as suggested by Grant Likely. See <https://patchwork.kernel.org/patch/1877311/> for some history. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: Ignore the return value of i2c_del_mux_adapter()Lars-Peter Clausen2013-04-021-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | i2c_del_mux_adapter() always returns 0. So all checks testing whether it will be non zero will always evaluate to false and the conditional code is dead code. This patch updates all callers of i2c_del_mux_adapter() to ignore its return value and assume that it will always succeed (which it will). A subsequent patch will make the return type of i2c_del_mux_adapter() void. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: mux: gpio: Check gpio_direction_output return valueJean Delvare2013-03-271-3/+14
| | | | | | | | | | | | | | | | | | gpio_direction_output() may fail, check for that and deal with it appropriately. Also log an error message if gpio_request() fails. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: Fix my e-mail address in drivers and documentationGuenter Roeck2013-03-221-1/+1
|/ | | | | | | My old e-mail address is no longer working. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c/for-next' of ↵Linus Torvalds2013-02-261-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - new drivers for Intel ismt & Broadcom bcm2835 - a number of drivers got support for more variants and mostly got cleaned up on the way (sis630, i801, at91, tegra, designware) - i2c got rid of all *_set_drvdata(..., NULL) on remove/probe failure - removed the i2c_smbus_process_call from the core since there are no users - mxs can now switch between PIO and DMA depending on the message size and the bus speed can now be arbitrary In addition, there is the usual bunch of fixes, cleanups, devm_* conversions, etc" Fixed conflict (and buggy devm_* conversion) in i2c-s3c2410.c * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits) i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls i2c: pxa: remove incorrect __exit annotations i2c: ocores: Fix pointer to integer cast warning i2c: tegra: remove warning dump if timeout happen in transfer i2c: fix i2c-ismt.c printk format warning i2c: i801: Add Device IDs for Intel Wellsburg PCH i2c: add bcm2835 driver i2c: ismt: Add Seth and Myself as maintainers i2c: sis630: checkpatch cleanup i2c: sis630: display unsigned hex i2c: sis630: use hex to constants for SMBus commands i2c: sis630: fix behavior after collision i2c: sis630: clear sticky bits i2c: sis630: Add SIS964 support i2c: isch: Add module parameter for backbone clock rate if divider is unset i2c: at91: fix unsed variable warning when building with !CONFIG_OF i2c: Adding support for Intel iSMT SMBus 2.0 host controller i2c: sh_mobile: don't send a stop condition by default inside transfers i2c: sh_mobile: eliminate an open-coded "goto" loop i2c: sh_mobile: fix timeout error handling ...
| * i2c: Remove unneeded xxx_set_drvdata(..., NULL) callsDoug Anderson2013-02-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is simply no reason to be manually setting the private driver data to NULL in the remove/fail to probe cases. This is just extra cruft code that can be removed. A few notes: * Nothing relies on drvdata being set to NULL. * The __device_release_driver() function eventually calls dev_set_drvdata(dev, NULL) anyway, so there's no need to do it twice. * I verified that there were no cases where xxx_get_drvdata() was being called in these drivers and checking for / relying on the NULL return value. This could be cleaned up kernel-wide but for now just take the baby step and remove from the i2c subsystem. Reported-by: Wolfram Sang <wsa@the-dreams.de> Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Jean Delvare <khali@linux-fr.org> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
* | Merge 3.8-rc5 into driver-core-nextGreg Kroah-Hartman2013-01-251-1/+1
|\ \ | |/ | | | | | | | | This resolves a gpio driver merge issue pointed out in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * i2c: muxes: fix wrong use of sizeof(ptr)Laurent Navet2013-01-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sizeof when applied to a pointer typed expression gives the size of the pointer The semantic patch that makes this output is available in scripts/coccinelle/misc/noderef.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* | drivers/i2c/muxes: remove depends on CONFIG_EXPERIMENTALKees Cook2013-01-111-2/+0
|/ | | | | | | | | | | The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Stephen Warren <swarren@nvidia.com> CC: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
* i2c: remove __dev* attributes from subsystemBill Pemberton2012-12-222-11/+11
| | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio) Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3) Acked-by: Barry Song <baohua.song@csr.com> (for sirf) Reviewed-by: Jean Delvare <khali@linux-fr.org> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds2012-12-181-31/+114
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...
| * i2c: mux: Add dt support to i2c-mux-gpio driverMaxime Ripard2012-11-161-31/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | Allow the i2c-mux-gpio to be used by a device tree enabled device. The bindings are inspired by the one found in the i2c-mux-pinctrl driver. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> [wsa: fixed some whitespace] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* | i2c-mux-pinctrl: Fix probe error pathGuenter Roeck2012-11-131-1/+1
|/ | | | | | | | | When allocating the memory for i2c busses, the code checked the wrong variable and thus never detected if there was a memory error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-mux-gpio: Add support for dynamically allocated GPIO pinsJean Delvare2012-10-051-6/+32
| | | | | | | | | | | | | | | | | | | | | | | | | The code instantiating an i2c-mux-gpio platform device doesn't necessarily know in advance the GPIO pin numbers it wants to use. If pins are on a GPIO device which gets its base GPIO number assigned dynamically at run-time, the values can't be hard-coded. In that case, let the caller tell i2c-mux-gpio the name of the GPIO chip and the (relative) GPIO pin numbers to use. At probe time, the i2c-mux-gpio driver will look for the chip and apply the proper offset to turn relative GPIO pin numbers to absolute GPIO pin numbers. The same could be (and was so far) done on the caller's end, however doing it in i2c-mux-gpio has two benefits: * It avoids duplicating the code on every caller's side (about 30 lines of code.) * It allows for deferred probing for the muxed part of the I2C bus only. If finding the GPIO chip is the caller's responsibility, then deferred probing (if the GPIO chip isn't there yet) will not only affect the mux and the I2C bus segments behind it, but also the I2C bus trunk. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Korsgaard <peter.korsgaard@barco.com>
* i2c-mux-gpio: Use devm_kzalloc instead of kzallocMaxime Ripard2012-10-051-9/+5
| | | | | | | | | Use the devm_kzalloc managed function to stripdown the error and remove code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-mux: Add support for device auto-detectionJean Delvare2012-10-054-7/+11
| | | | | | | | | | | | | | | | | Let I2C bus segments behind multiplexers have a class. This allows for device auto-detection on these segments. As long as parent segments don't share the same class, it should be fine. I implemented support in drivers i2c-mux-gpio and i2c-mux-pca954x. I left i2c-mux-pca9541 and i2c-mux-pinctrl alone for the moment as I don't know if this feature makes sense for the use cases of these drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: David Daney <david.daney@cavium.com> Cc: Michael Lawnick <ml.lawnick@gmx.de> Cc: Rodolfo Giometti <giometti@linux.it>
* i2c: Update Guenter Roeck's e-mail addressGuenter Roeck2012-07-241-1/+1
| | | | | | | My old e-mail address won't be valid for much longer. Time to update it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Add generic I2C multiplexer using pinctrl APIStephen Warren2012-06-043-0/+292
| | | | | | | | | | | | | | | | | | | | | | | | This is useful for SoCs whose I2C module's signals can be routed to different sets of pins at run-time, using the pinctrl API. +-----+ +-----+ | dev | | dev | +------------------------+ +-----+ +-----+ | SoC | | | | /----|------+--------+ | +---+ +------+ | child bus A, on first set of pins | |I2C|---|Pinmux| | | +---+ +------+ | child bus B, on second set of pins | \----|------+--------+--------+ | | | | | +------------------------+ +-----+ +-----+ +-----+ | dev | | dev | | dev | +-----+ +-----+ +-----+ Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c: Rename last mux driver to standard patternJean Delvare2012-05-123-24/+23
| | | | | | | | | | | | | Update the MAINTAINERS entry and all other references accordingly. Based on an original patch by Wolfram Sang. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> [wsa: fixed merge conflict due to rework in i2c_add_mux_adapter()] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c: muxes: rename first set of drivers to a standard patternWolfram Sang2012-05-124-4/+4
| | | | | | | | | | | Apply a naming pattern like in the rest of the subsystem to a first set of mux drivers. Those drivers are the low-hanging fruit; we want to pick them to motivate upcoming drivers to follow the new pattern. The missing GPIO driver will be converted in a later patch. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> (pca9541) Acked-by: Jean Delvare <khali@linux-fr.org>
* i2c: Add a struct device * parameter to i2c_add_mux_adapter()David Daney2012-05-123-3/+5
| | | | | | | | | | | And adjust all callers. The new device parameter is used in the next patch to initialize the mux's of_node so that its children may be automatically populated. Signed-off-by: David Daney <david.daney@cavium.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c: Convert drivers/i2c/muxes/* to use module_i2c_driver()Axel Lin2012-03-262-24/+2
| | | | | | | | | | | | This patch converts the drivers in drivers/i2c/muxes/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Michael Lawnick <ml.lawnick@gmx.de> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/gpio-i2cmux: Convert to use module_platform_driver()Axel Lin2012-01-121-12/+1
| | | | | | | | | Convert gpio-i2cmux to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/pca954x: Initialize the mux to disconnected statePetri Gynther2011-06-291-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | pca954x power-on default is channel 0 connected. If multiple pca954x muxes are connected to the same physical I2C bus, the parent bus will see channel 0 devices behind both muxes by default. This is bad. Scenario: -- pca954x @ 0x70 -- ch 0 (I2C-bus-101) -- EEPROM @ 0x50 | I2C-bus-1 --- | -- pca954x @ 0x71 -- ch 0 (I2C-bus-111) -- EEPROM @ 0x50 1. Load I2C bus driver: creates I2C-bus-1 2. Load pca954x driver: creates virtual I2C-bus-101 and I2C-bus-111 3. Load eeprom driver 4. Try to read EEPROM @ 0x50 on I2C-bus-101. The transaction will also bleed onto I2C-bus-111 because pca954x @ 0x71 channel 0 is connected by default. Fix: Initialize pca954x to disconnected state in pca954x_probe() Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
* i2c: Add generic I2C multiplexer using GPIO APIPeter Korsgaard2011-01-103-0/+197
| | | | | | | | | | | | | | | | | | | | | | | Add an i2c mux driver providing access to i2c bus segments using a hardware MUX sitting on a master bus and controlled through gpio pins. E.G. something like: ---------- ---------- Bus segment 1 - - - - - | | SCL/SDA | |-------------- | | | |------------| | | | | | Bus segment 2 | | | Linux | GPIO 1..N | MUX |--------------- Devices | |------------| | | | | | | | Bus segment M | | | |---------------| | ---------- ---------- - - - - - SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M according to the settings of the GPIO pins 1..N. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/pca954x: Remove __devinit and __devexit from probe and remove functionsGuenter Roeck2010-10-241-4/+4
| | | | | | | | | The underlying I2C adapter may or may not be present when this driver gets initialized, and may disappear later, so there is no safe time at which the probe and remove functions can be discarded. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/mux: Driver for PCA9541 I2C Master SelectorGuenter Roeck2010-10-243-0/+422
| | | | | | | | | | This patch adds support for PCA9541, an I2C Bus Master Selector. The driver is modeled as single channel I2C Multiplexer to be able to utilize the I2C multiplexer framework. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
* i2c: Change to new flag variablematt mooney2010-10-241-3/+1
| | | | | | | Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
OpenPOWER on IntegriCloud