summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/chips
Commit message (Collapse)AuthorAgeFilesLines
...
* ARM: OMAP: I2C: tps65010 driver converts to gpiolibDavid Brownell2008-04-142-1/+101
| | | | | | | | | | | | | | | | Make the tps65010 driver use gpiolib to expose its GPIOs. Note: This patch will get merged via omap tree instead of I2C as it will cause some board updates. This has been discussed at on the I2C list: http://lists.lm-sensors.org/pipermail/i2c/2008-March/003031.html Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: i2c@lm-sensors.org Signed-off-by: Tony Lindgren <tony@atomide.com>
* i2c: chips subdirectory is deprecatedJean Delvare2008-03-121-0/+7
| | | | | | | Let driver authors know that drivers/i2c/chips is usually the wrong place for new drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Discard useless I2C driver IDsJean Delvare2008-02-073-3/+0
| | | | | | | | | Many I2C hwmon drivers define a driver ID but no other code references these, meaning that they are useless. Discard them, along with a few IDs which are defined but never used at all. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* deprecate obsolete pca9539 drivereric miao2008-02-051-2/+5
| | | | | | | | | | | | | | | Use drivers/gpio/pca9539.c instead. Signed-off-by: eric miao <eric.miao@marvell.com> Acked-by: Ben Gardner <bgardner@wabtec.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* i2c/tps65010: move header to <linux/i2c/...>David Brownell2008-01-273-6/+2
| | | | | | | | | Move the tps65010 header file from the OMAP arch directory to the more generic <linux/i2c/...> directory, and remove the spurious dependency of this driver on OMAP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: normal_i2c can be made const (remaining drivers)Jean Delvare2008-01-275-7/+9
| | | | Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: the scheduled I2C RTC driver removalAdrian Bunk2008-01-275-1131/+0
| | | | | | | | This patch contains the scheduled removal of legacy I2C RTC drivers with replacement drivers. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/tsl2550: Add power management addedRodolfo Giometti2008-01-271-0/+21
| | | | | Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Add support for the PCF8575 chipBart Van Assche2008-01-273-1/+230
| | | | | Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* driver core: Make the dev_*() family of macros in device.h completeEmil Medve2008-01-241-6/+0
| | | | | | | | Removed duplicates defined elsewhere Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* i2c/isp1301_omap: Build fixDavid Brownell2007-12-121-1/+1
| | | | | | | | | Build fix to the isp1301_omap driver ... this driver gets built more often in the OMAP tree than in mainline, partly because the defconfig for H2 (plus probably H3 and H4) needs updating. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/eeprom: Recognize VGN as a valid Sony Vaio name prefixJean Delvare2007-11-151-5/+9
| | | | | | | | Recent (i.e. 2005 and later) Sony Vaio laptops have names beginning with VGN rather than PCG. Update the eeprom driver so that it recognizes these. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/eeprom: Hide Sony Vaio serial numbersJean Delvare2007-11-151-8/+15
| | | | | | | | | | | The sysfs interface to DMI data takes care to not make the system serial number and UUID world-readable, presumably due to privacy concerns. For consistency, we should not let the eeprom driver export these same strings to the world on Sony Vaio laptops. Instead, only make them readable by root, as we already do for BIOS passwords. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Add missing newlines to some uses of dev_<level> messagesJoe Perches2007-10-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Make the pr_*() family of macros in kernel.h completeEmil Medve2007-10-171-6/+4
| | | | | | | | | | | | | | | Other/Some pr_*() macros are already defined in kernel.h, but pr_err() was defined multiple times in several other places Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Tony Lindgren <tony@atomide.com> Reviewed-by: Satyam Sharma <satyam@infradead.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* i2c/pcf8574: No arbitrary initializationJean Delvare2007-10-131-7/+7
| | | | | | | | Do not initialize the PCF8574 with an arbitrary value. Users will have to write the initial value to sysfs themselves. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Aurelien Jarno <aurelien@aurel32.net>
* i2c/tps65010: New-style driver updates, part 2David Brownell2007-10-131-146/+38
| | | | | | | | | | | | | Switch the tps65010 driver into a "new-style" I2C driver, and convert all of its in-tree users (board support for OSK, H2, H3) accordingly. That accounts for most of the board-specific code in this driver; the rest of that code is now moved into board-specific initcalls. Also remove some of the many now-superfluous #includes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/tps65010: New-style driver updates, part 1David Brownell2007-10-131-66/+69
| | | | | | | | | Prepare to convert tps65010 driver to "new style" driver by changing how it references the i2c_client. This lets the eventual patch with driver and platform updates be smaller. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/menelaus: Build fixDavid Brownell2007-08-141-2/+1
| | | | | | | Fix Menelaus build error, and remove needless "#define DEBUG". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/isp1301_omap: Build fixes, whitespaceDavid Brownell2007-08-141-21/+21
| | | | | | | | | | | | | | | Build fixes for isp1301_omap driver. I think an earlier version of this must have gotten lost somewhere, or maybe it only went into the Linux-OMAP tree. Also, some whitespace fixes to bring this more into sync with the version of this found in the Linux-OMAP tree. (That version has updates for the OTG controller on the OMAP 1710 which break that functionality on OMAP 161x boards like the H2, so merging all of it is not currently an option.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATIONRafael J. Wysocki2007-07-291-1/+1
| | | | | | | | | Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid confusion (among other things, with CONFIG_SUSPEND introduced in the next patch). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* i2c: ds1682 warning fixAndrew Morton2007-07-261-1/+2
| | | | | | | | | | | | ia64: drivers/i2c/chips/ds1682.c: In function `ds1682_show': drivers/i2c/chips/ds1682.c:78: warning: long long unsigned int format, long unsigned int arg (arg 3) drivers/i2c/chips/ds1682.c:78: warning: long long unsigned int format, long unsigned int arg (arg 3) Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* OMAP: add TI TWL92330/Menelaus Power Management chip driverTony Lindgren2007-07-173-0/+1292
| | | | | | | | | | | | | | | | | | | | | | Add Texas Instruments TWL92330/Menelaus Power Management chip driver. This includes voltage regulators, Dual slot memory card tranceivers and real-time clock(RTC). The support for RTC is integrated with this driver only; it is not separate module. Passes 'rtctest' on OMAP H4 EVM, other than lack of "periodic" (1/N second) IRQs. System wakeup alarms (from suspend-to-RAM) work too. The battery keeps the RTC active over power off, so once you set clock (rdate/ntpdate/etc, then "hwclock -w") then RTC_HCTOSYS at boot time will behave as expected. Cc: "Jean Delvare" <khali@linux-fr.org> Cc: "Tony Lindgren" <tony@atomide.com> Cc: "David Brownell" <david-b@pacbell.net> Signed-off-by: Trilok Soni <soni.trilok@gmail.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* missing argument in bin_attribute ->read()/->write()Al Viro2007-07-151-4/+4
| | | | | | | | Fallout from commit 91a6902958f052358899f58683d44e36228d85c2 ('sysfs: add parameter "struct bin_attribute *" ...') Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2007-07-122-5/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits) sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes sysfs: make directory dentries and inodes reclaimable sysfs: implement sysfs_get_dentry() sysfs: move sysfs_drop_dentry() to dir.c and make it static sysfs: restructure add/remove paths and fix inode update sysfs: use sysfs_mutex to protect the sysfs_dirent tree sysfs: consolidate sysfs spinlocks sysfs: make kobj point to sysfs_dirent instead of dentry sysfs: implement sysfs_find_dirent() and sysfs_get_dirent() sysfs: implement SYSFS_FLAG_REMOVED flag sysfs: rename sysfs_dirent->s_type to s_flags and make room for flags sysfs: make sysfs_drop_dentry() access inodes using ilookup() sysfs: Fix oops in sysfs_drop_dentry on x86_64 sysfs: use singly-linked list for sysfs_dirent tree sysfs: slim down sysfs_dirent->s_active sysfs: move s_active functions to fs/sysfs/dir.c sysfs: fix root sysfs_dirent -> root dentry association sysfs: use iget_locked() instead of new_inode() sysfs: reorganize sysfs_new_indoe() and sysfs_create() sysfs: fix parent refcounting during rename and move ...
| * sysfs: add parameter "struct bin_attribute *" in .read/.write methods for ↵Zhang Rui2007-07-112-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * sysfs: kill unnecessary attribute->ownerTejun Heo2007-07-112-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | i2c/tsl2550: Speed up initializationJean Delvare2007-07-121-20/+26
| | | | | | | | | | | | | | | | | | | | There's some redundancy in the tsl2550 initialization sequence. It is powering up the device twice, and setting the operating mode twice too. Setting things just once saves SMBus transactions, which aren't always cheap, speeding up the device initialization. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rodolfo Giometti <giometti@linux.it>
* | i2c: Add support for the TSL2550Rodolfo Giometti2007-07-123-0/+465
| | | | | | | | | | | | | | | | Add support for Taos TSL2550 ambient light sensors. (http://www.taosinc.com/product_detail.asp?cateid=4&proid=18). Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | i2c: New DS1682 chip driverGrant Likely2007-07-123-0/+270
| | | | | | | | | | | | | | | | | | A driver for the Dallas DS1682 elapsed time recorder chip. Tested on a MPC5200 based board using the integrated i2c adapter. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | i2c: Fix the i2c_smbus_read_i2c_block_data() prototypeJean Delvare2007-07-122-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let the drivers specify how many bytes they want to read with i2c_smbus_read_i2c_block_data(). So far, the block count was hard-coded to I2C_SMBUS_BLOCK_MAX (32), which did not make much sense. Many driver authors complained about this before, and I believe it's about time to fix it. Right now, authors have to do technically stupid things, such as individual byte reads or full-fledged I2C messaging, to work around the problem. We do not want to encourage that. I even found that some bus drivers (e.g. i2c-amd8111) already implemented I2C block read the "right" way, that is, they didn't follow the old, broken standard. The fact that it was never noticed before just shows how little i2c_smbus_read_i2c_block_data() was used, which isn't that surprising given how broken its prototype was so far. There are some obvious compatiblity considerations: * This changes the i2c_smbus_read_i2c_block_data() prototype. Users outside the kernel tree will notice at compilation time, and will have to update their code. * User-space has access to i2c_smbus_xfer() directly using i2c-dev, so the changed expectations would affect tools such as i2cdump. In order to preserve binary compatibility, we give I2C_SMBUS_I2C_BLOCK_DATA a new numeric value, and define I2C_SMBUS_I2C_BLOCK_BROKEN with the old numeric value. When i2c-dev receives a transaction with the old value, it can convert it to the new format on the fly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | i2c: Deprecate legacy RTC driversJean Delvare2007-07-121-3/+12
|/ | | | | | | | | | | | | | | | | | | We have a new RTC subsystem with better drivers. Legacy driver status: * ds1337: The DS1337 and DS1339 are now supported by the rtc-ds1307 driver, so it looks to me like we could even delete the ds1337 driver right away. * ds1374: Will soon be replaced with Scott Wood's rtc-ds1374 driver. * m41t00: The M41T00 is supported by the rtc-ds1307 driver. For the M41T81 and M41T85, the rtc-m41t80 driver written by Atsushi Nemoto should work. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Mark A. Greer <mgreer@mvista.com> Acked-by: James Chapman <jchapman@katalix.com> Cc: Randy Vinson <rvinson@mvista.com>
* PM: Separate hibernation code from suspend codeRafael J. Wysocki2007-05-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | [ With Johannes Berg <johannes@sipsolutions.net> ] Separate the hibernation (aka suspend to disk code) from the other suspend code. In particular: * Remove the definitions related to hibernation from include/linux/pm.h * Introduce struct hibernation_ops and a new hibernate() function to hibernate the system, defined in include/linux/suspend.h * Separate suspend code in kernel/power/main.c from hibernation-related code in kernel/power/disk.c and kernel/power/user.c (with the help of hibernation_ops) * Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_ops Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* remove software_suspend()Johannes Berg2007-05-071-1/+3
| | | | | | | | | | | | | | | | Remove software_suspend() and all its users since pm_suspend(PM_SUSPEND_DISK) should be equivalent and there's no point in having two interfaces for the same thing. The patch also changes the valid_state function to return 0 (false) for PM_SUSPEND_DISK when SOFTWARE_SUSPEND is not configured instead of accepting it and having the whole thing fail later. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Use menuconfig objects - I2CJan Engelhardt2007-05-011-11/+10
| | | | | | | | Allow the whole I2C menu to be disabled at once without diving into the submenus for deselecting all options (should the user desire so). Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/ds1374: Check workqueue creation statusCyrill V. Gorcunov2007-03-221-0/+4
| | | | | | | | | Check if workqueue creation failed. Further usage of NULL pointed workqueue is not good I guess ;) Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] mark struct file_operations const 3Arjan van de Ven2007-02-121-1/+1
| | | | | | | | | | | Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: <linux/usb_ch9.h> becomes <linux/usb/ch9.h>David Brownell2007-02-071-1/+1
| | | | | | | | | This moves <linux/usb_ch9.h> to <linux/usb/ch9.h> to reduce some of the clutter of usb header files. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* i2c/m41t00: Do not forget to write yearPhilippe De Muyter2007-01-051-0/+1
| | | | | | | | | m41t00.c forgets to set the year field in set_rtc_time; fix that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] fix more workqueue build breakage (tps65010)David Brownell2006-12-131-9/+12
| | | | | | | | | | | | | | | | | | More fixes to build breakage from the work_struct changes ... this updates the tps65010 driver. Plus, fix some dependencies related to the way it's used on the OMAP OSK: force static linking there, since the resulting kernel can't link. NOTE that until the i2c core gets fixed to work without SMBUS_QUICK, kernels needing this driver must still use "tps65010.force=0,0x48" on the command line. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* i2c: fix broken ds1337 initializationDirk Eibach2006-12-101-1/+7
| | | | | | | | | | | | | | | | | | | | | On a custom board with ds1337 RTC I found that upgrade from 2.6.15 to 2.6.18 broke RTC support. The main problem are changes to ds1337_init_client(). When a ds1337 recognizes a problem (e.g. power or clock failure) bit 7 in status register is set. This has to be reset by writing 0 to status register. But since there are only 16 byte written to the chip and the first byte is interpreted as an address, the status register (which is the 16th) is never written. The other problem is, that initializing all registers to zero is not valid for day, date and month register. Funny enough this is checked by ds1337_detect(), which depends on this values not being zero. So then treated by ds1337_init_client() the ds1337 is not detected anymore, whereas the failure bit in the status register is still set. Signed-off-by: Dirk Stieler <stieler@gdsys.de> Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] ... and more work_struct-induced breakage (mips)Al Viro2006-12-061-1/+8
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* WorkStruct: make allyesconfigDavid Howells2006-11-221-6/+6
| | | | | | Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-052-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* USB: move <linux/usb_otg.h> to <linux/usb/otg.h>David Brownell2006-09-271-1/+1
| | | | | | | | Move <linux/usb_otg.h> to <linux/usb/otg.h>. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] inode_diet: Replace inode.u.generic_ip with inode.i_privateTheodore Ts'o2006-09-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The following patches reduce the size of the VFS inode structure by 28 bytes on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction in the inode size on a UP kernel that is configured in a production mode (i.e., with no spinlock or other debugging functions enabled; if you want to save memory taken up by in-core inodes, the first thing you should do is disable the debugging options; they are responsible for a huge amount of bloat in the VFS inode structure). This patch: The filesystem or device-specific pointer in the inode is inside a union, which is pretty pointless given that all 30+ users of this field have been using the void pointer. Get rid of the union and rename it to i_private, with a comment to explain who is allowed to use the void pointer. This is just a cleanup, but it allows us to reuse the union 'u' for something something where the union will actually be used. [judith@osdl.org: powerpc build fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Judith Lebzelter <judith@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* i2c: __must_check fixes (chip drivers)Jean Delvare2006-09-265-27/+97
| | | | | | | | | | | | | | | | i2c: __must_check fixes (chip drivers) Check for error on sysfs file creation. Delete sysfs files on device removal. The approach taken for the most complex case (pcf8591) is similar to what Mark M. Hoffman proposed for hardware monitoring chip drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Gardner <bgardner@wabtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: tps65010 build fixesDavid Brownell2006-08-261-6/+6
| | | | | | | | | | | | | | | | The tps65010.c driver in the main tree never got updated with build fixes since the last batch of I2C driver changes; and the genirq trigger flags were updated wierdly too. This also includes a minor tweak to reduce the frequency used to poll for unplug-the-AC-power on the TPS chips that don't provide relevant IRQs. It _would_ be nice to sense whether there's even a battery, but that'd normally be an HDQ/1-wire interface to a smart battery, and such APIs aren't standardized. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pca9539: Honor the force parameterBen Gardner2006-07-121-5/+7
| | | | | | | | | The pca9539 driver doesn't honor the force parameter; it always does detection. This patch will skip detection if forced. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud