summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-s3c2410.c
Commit message (Collapse)AuthorAgeFilesLines
* i2c: s3c2410: Add SMBus emulation for block readJaemin Yoo2013-04-091-0/+9
| | | | | | | | | | | | | | | | | | | | | | SMBus read and write are supported by the emulation layer of i2c framework if the controller doesn't have SMBus features. I2C_M_RECV_LEN flag is used to let i2c drivers know rx length is not yet determined but will be read to the first byte in rx buffer. s3c2410 doesn't handle this flag. So only one byte is read from slave. There fore following two features are added to the driver code. 1. skip rx length check if I2C_M_RECV_LEN is set and the length is 1. 2. add actual bytes to the rx length after reading first bytes if I2C_M_RECV_LEN. I2C_M_RECV_LEN is only set for SMBus command. So this code does not affect legacy codes which only use i2c command for s3c2410. Signed-off-by: Jaemin Yoo <jmin.yoo@samsung.com> Tested-by: Prasanna Kumar <prasanna.ps@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: s3c2410: fixup the styling of the newly moved register definitionsHeiko Stübner2013-03-241-27/+25
| | | | | | | | Make them conform more to established standards. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driverHeiko Stübner2013-03-241-1/+40
| | | | | | | | | | The register definitions are only used in the driver itself. This also removes the last dependency on plat/ includes from the i2c driver. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c/for-next' of ↵Linus Torvalds2013-02-261-39/+23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - new drivers for Intel ismt & Broadcom bcm2835 - a number of drivers got support for more variants and mostly got cleaned up on the way (sis630, i801, at91, tegra, designware) - i2c got rid of all *_set_drvdata(..., NULL) on remove/probe failure - removed the i2c_smbus_process_call from the core since there are no users - mxs can now switch between PIO and DMA depending on the message size and the bus speed can now be arbitrary In addition, there is the usual bunch of fixes, cleanups, devm_* conversions, etc" Fixed conflict (and buggy devm_* conversion) in i2c-s3c2410.c * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits) i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls i2c: pxa: remove incorrect __exit annotations i2c: ocores: Fix pointer to integer cast warning i2c: tegra: remove warning dump if timeout happen in transfer i2c: fix i2c-ismt.c printk format warning i2c: i801: Add Device IDs for Intel Wellsburg PCH i2c: add bcm2835 driver i2c: ismt: Add Seth and Myself as maintainers i2c: sis630: checkpatch cleanup i2c: sis630: display unsigned hex i2c: sis630: use hex to constants for SMBus commands i2c: sis630: fix behavior after collision i2c: sis630: clear sticky bits i2c: sis630: Add SIS964 support i2c: isch: Add module parameter for backbone clock rate if divider is unset i2c: at91: fix unsed variable warning when building with !CONFIG_OF i2c: Adding support for Intel iSMT SMBus 2.0 host controller i2c: sh_mobile: don't send a stop condition by default inside transfers i2c: sh_mobile: eliminate an open-coded "goto" loop i2c: sh_mobile: fix timeout error handling ...
| * i2c: s3c2410: Add quirk to exclude GPIO config for exynos5440Giridhar Maruthy2013-01-281-0/+2
| | | | | | | | | | | | Signed-off-by: Giridhar Maruthy <giridhar.m@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: Remove err_cpufreq labelTushar Behera2013-01-281-5/+2
| | | | | | | | | | | | | | | | err_cpufreq label is now used only once. It can be removed and related code can be moved to the caller location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: Move location of clk_prepare_enable() call in probe functionTushar Behera2013-01-281-17/+12
| | | | | | | | | | | | | | | | | | In i2c-s3c2410 driver probe, only s3c24xx_i2c_init() needs the I2C clock to be enabled. Moving clk_prepare_enable() and clk_disable_unprepare() calls to around this function simplifies the return path of probe call. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: Convert to use devm_* APIsTushar Behera2013-01-281-11/+5
| | | | | | | | | | | | | | | | | | i2c-s3c2410 driver is modified to use devm_clk_get() and devm_request_irq(). This also simplifies the return path in driver's probe. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: Remove unnecessary label err_noclkTushar Behera2013-01-281-6/+3
| | | | | | | | | | | | | | | | err_noclk label redirects to a simple return statement. Move the return statement to the caller location and remove the label. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* | i2c: Convert to devm_ioremap_resource()Thierry Reding2013-01-241-4/+3
|/ | | | | | | | | | | | | Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds2012-12-181-81/+130
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...
| * i2c: s3c2410: Remove recently introduced performance overheadsMark Brown2012-11-221-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The changes in "i2c-s3c2410: use exponential back off while polling for bus idle" remove the initial busy wait for I2C transfers to complete and replace it with usleep_range() calls which will schedule. Since for older SoCs I2C transfers would usually complete within an extremely small number of CPU cycles there is a win from not having to schedule. This happens because on the older SoCs the cores run at a smaller multiple of the speeds that the I2C bus is operating at; on more modern SoCs the busy wait is less likely to be effective. Fix the issue by restoring the busy wait, reducing the number of spins from 20 to 3 which covers the overwhelming majority of I2C transfers on the SoCs where the busy wait is effective. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Olof Johansson <olof@lixom.net> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: Add fix for i2c suspend/resumeAbhilash Kesavan2012-11-191-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The I2C driver makes a gpio_request during initialization. This request happens again on resume and fails due to the earlier successful request. Re-factor the code to only initialize the gpios during probe. Errors on resume without this: [ 16.020000] s3c-i2c s3c2440-i2c.0: gpio [42] request failed [ 16.020000] s3c-i2c s3c2440-i2c.1: gpio [44] request failed [ 16.020000] s3c-i2c s3c2440-i2c.2: gpio [6] request failed Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: Fix code to free gpiosAbhilash Kesavan2012-11-191-0/+1
| | | | | | | | | | | | | | Store the requested gpios so that they can be freed on error/removal. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: do not special case HDMIPHY stuck bus detectionDaniel Kurtz2012-11-161-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "i2c-s3c2410: Add HDMIPHY quirk for S3C2440" added support for HDMIPHY with some special handling in s3c24xx_i2c_set_master: "due to unknown reason (probably HW bug in HDMIPHY and/or the controller) a transfer fails to finish. The controller hangs after sending the last byte, the workaround for this bug is resetting the controller after each transfer" The "unknown reason" was that the proper sequence for generating a STOP condition wasn't being followed as per the datasheet. Since this is fixed by "PATCH: i2c-s3c2410: do not generate STOP for QUIRK_HDMIPHY buses", remove the special handling. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: use exponential back off while polling for bus idleDaniel Kurtz2012-11-161-20/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usually, the i2c controller has finished emitting the i2c STOP before the driver reaches the bus idle polling loop. Optimize for this most common case by reading IICSTAT first and potentially skipping the loop. If the cpu is faster than the hardware, we wait for bus idle in a polling loop. However, since the duration of one iteration of the loop is dependent on cpu freq, and this i2c IP is used on many different systems, use a time based loop timeout (5 ms). We would like very low latencies to detect bus idle for the normal 'fast' case. However, if a device is slow to release the bus for some reason, it could hold off the STOP generation for up to several milliseconds. Rapidly polling for bus idle would seriously load the CPU while waiting for it to release the bus. So, use a partial exponential backoff as a compromise between idle detection latency and cpu load. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHYDaniel Kurtz2012-11-161-2/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The datasheet says that the STOP sequence should be: 1) I2CSTAT.5 = 0 - Clear BUSY (or 'generate STOP') 2) I2CCON.4 = 0 - Clear IRQPEND 3) Wait until the stop condition takes effect. 4*) I2CSTAT.4 = 0 - Clear TXRXEN Where, step "4*" is only for buses with the "HDMIPHY" quirk. However, after much experimentation, it appears that: a) normal buses automatically clear BUSY and transition from Master->Slave when they complete generating a STOP condition. Therefore, step (3) can be done in doxfer() by polling I2CCON.4 after starting the STOP generation here. b) HDMIPHY bus does neither, so there is no way to do step 3. There is no indication when this bus has finished generating STOP. In fact, we have found that as soon as the IRQPEND bit is cleared in step 2, the HDMIPHY bus generates the STOP condition, and then immediately starts transferring another data byte, even though the bus is supposedly stopped. This is presumably because the bus is still in "Master" mode, and its BUSY bit is still set. To avoid these extra post-STOP transactions on HDMI phy devices, we just disable Serial Output on the bus (I2CSTAT.4 = 0) directly, instead of first generating a proper STOP condition. This should float SDA & SCK terminating the transfer. Subsequent transfers start with a proper START condition, and proceed normally. The HDMIPHY bus is an internal bus that always has exactly two devices, the host as Master and the HDMIPHY device as the slave. Skipping the STOP condition has been tested on this bus and works. Also, since we disable the bus directly from the isr, we can skip the bus idle polling loop at the end of doxfer(). Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: grab adapter lock while changing i2c clockDaniel Kurtz2012-11-161-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We probably don't want to change I2C frequency while a transfer is in progress. The current implementation grabs a spinlock, but that only protected the writes to IICCON when starting a message, it didn't protect against clock changes in the middle of a transaction. Note: The i2c-core already grabs the adapter lock before calling s3c24xx_i2c_doxfer(), which ensures that only one caller is issuing a xfer at a time. This means it is not necessary to disable interrupts (spin_lock_irqsave) when changing frequencies, since there won't be any i2c interrupts if there is no on-going xfer. Lastly, i2c_lock_adapter() may cause the cpufreq_transition to sleep if if a xfer is in progress, but this is ok since cpufreq notifiers are called in a kernel thread, and there are already cases where it could sleep, such as when using i2c to update the output of a voltage regulator. Note: the cpufreq part of this change has no functional affect on exynos, where the i2c clock is independent of the cpufreq. But, there is a slight perfomance boost since we no longer need to lock/unlock an additional spinlock. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: Add support for pinctrlTomasz Figa2012-11-161-4/+8
| | | | | | | | | | | | | | | | | | This patch adds support for pin configuration using pinctrl subsystem to the i2c-s3c2410 driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: Convert to devm_request_and_ioremap()Mark Brown2012-11-161-28/+7
| | | | | | | | | | | | | | A small code saving and less error handling to worry about. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: s3c2410: Refactor ifdefs for PM_SLEEPMark Brown2012-11-161-1/+5
| | | | | | | | | | | | | | | | | | | | Use the PM_SLEEP ifdef for system suspend and resume. This is partly in preparation for adding runtime operations and partly because a user may in theory choose to enable runtime suspend but not system suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* | Merge branch 'for-linus' of ↵Linus Torvalds2012-12-131-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
| * | Fix misspellings of "whether" in comments.Adam Buchbinder2012-11-191-2/+2
| |/ | | | | | | | | | | | | | | "Whether" is misspelled in various comments across the tree; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | i2c: s3c2410: Fix code to free gpiosAbhilash Kesavan2012-11-191-0/+1
|/ | | | | | | Store the requested gpios so that they can be freed on error/removal. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds2012-10-111-9/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull i2c-embedded changes from Wolfram Sang: "The changes for i2c-embedded include: - massive rework of the omap driver - massive rework of the at91 driver. In fact, the old driver gets removed; I am okay with this approach since the old driver was depending on BROKEN and its limitations made it practically unusable, so people used bitbanging instead. But even if there are users, there is no platform_data or module parameter which would need to be converted. It is just another driver doing I2C transfers, just way better. Modifications of arch/arm/at91 related files have proper acks from the maintainer. - new driver for R-Car I2C - devicetree and generic_clock conversions and fixes - usual driver fixes and changes. The rework patches have come a long way and lots of people have been involved in creating/testing them. Most patches have been in linux-next at least since 3.6-rc5. A few have been added in the last week, I have to admit. An unexpected (but welcome :)) peak in private life is the cause for that. The "late" patches shouldn't cause any merge conflicts and I will have a special eye on them during the stabilization phase. This is an exception and I want to have the patches in place properly in time again for the next kernels." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits) MXS: Implement DMA support into mxs-i2c i2c: add Renesas R-Car I2C driver i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints i2c: nomadik: Add Device Tree support to the Nomadik I2C driver i2c: algo: pca: Fix chip reset function for PCA9665 i2c: mpc: Wait for STOP to hit the bus i2c: davinci: preparation for switch to common clock framework omap-i2c: fix incorrect log message when using a device tree i2c: omap: sanitize exit path i2c: omap: switch over to autosuspend API i2c: omap: remove unnecessary pm_runtime_suspended check i2c: omap: switch to threaded IRQ support i2c: omap: remove redundant status read i2c: omap: get rid of the "complete" label i2c: omap: resize fifos before each message i2c: omap: simplify IRQ exit path i2c: omap: always return IRQ_HANDLED i2c: omap: simplify errata check i2c: omap: bus: add a receiver flag ...
| * i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepareThomas Abraham2012-10-061-9/+9
| | | | | | | | | | | | | | | | Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* | ARM: samsung: move platform_data definitionsArnd Bergmann2012-09-191-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
* i2c-s3c2410: Use plain pm_runtime_put()Mark Brown2012-07-131-2/+2
| | | | | | | | | There's no point in using _sync() as we don't really care if the suspend has completed immediately. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c: s3c2410: Fix pointer type passed to of_match_node()Karol Lewandowski2012-07-131-1/+1
| | | | | | | | | | | | | This commit fixes warning introduced in 27452498a ("i2c-s3c2410: Rework device type handling"): drivers/i2c/busses/i2c-s3c2410.c: In function 's3c24xx_get_device_quirks': drivers/i2c/busses/i2c-s3c2410.c:125: warning: passing argument 1 of 'of_match_node' from incompatible pointer type include/linux/of.h:245: note: expected 'const struct of_device_id *' but argument is of type 'const struct of_device_id (*)[4]' Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLINGMark Brown2012-05-301-1/+2
| | | | | | | | | | | | | | | | | | Since there are uses for I2C_M_NOSTART which are much more sensible and standard than most of the protocol mangling functionality (the main one being gather writes to devices where something like a register address needs to be inserted before a block of data) create a new I2C_FUNC_NOSTART for this feature and update all the users to use it. Also strengthen the disrecommendation of the protocol mangling while we're at it. In the case of regmap-i2c we remove the requirement for mangling as I2C_M_NOSTART is the only mangling feature which is being used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-s3c2410: Add HDMIPHY quirk for S3C2440Karol Lewandowski2012-05-121-0/+30
| | | | | | | | | | | | | | | | | This patch adds support for s3c2440 I2C bus controller dedicated HDMIPHY device on Exynos4 platform. Some quirks are introduced due to differences between HDMIPHY and other I2C controllers on Exynos4. These differences are: - no GPIOs, HDMIPHY is inside the SoC and the controller is connected internally - due to unknown reason (probably HW bug in HDMIPHY and/or the controller) a transfer fails to finish. The controller hangs after sending the last byte, the workaround for this bug is resetting the controller after each transfer Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Tested-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c-s3c2410: Rework device type handlingKarol Lewandowski2012-05-121-41/+34
| | | | | | | | | | | | | | Reorganize driver a bit to better handle device tree-based systems: - move machine type to driver's private structure instead of quering platform device variants in runtime - replace s3c24xx_i2c_type enum with unsigned int that holds bitmask with revision-specific quirks Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c-s3c2410: Drop unused defineKarol Lewandowski2012-05-121-3/+1
| | | | | | | | | | Use standard of_match_ptr() to avoid defining variable unused in non device tree builds. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c-s3c2410: Add stub runtime power managementMark Brown2012-03-071-0/+10
| | | | | | | | | | | | | Add stub runtime_pm calls which go through the flow of enabling and disabling but don't actually do anything with the device itself as there's nothing useful we can do. This provides the core PM framework with information about when the device is idle, enabling chip wide power savings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c-s3c2410: Convert to devm_kzalloc()Mark Brown2012-03-071-3/+1
| | | | | | | | | | Saves remembering to call kfree(). There's some kfree()s used by the resource still, these will be removed in 3.3 using the newly added devm_request_and_ioremap(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpioTushar Behera2011-12-181-1/+1
| | | | | | | | | | | | s3c24xx_i2c_parse_dt_gpio is called when cfg_gpio is not defined in the platform data of the i2c device. When DT is not enabled, the above function always returns -EINVAL. Since there can be some i2c devices which don't need to configure any gpio lines, the probe of such devices would fail here. Changing the default return value to success would fix this issue. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idleMark Brown2011-12-181-0/+1
| | | | | | | Be a bit more friendly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
*-. Merge branches 'for-32/i2c/nomadik', 'for-32/i2c/s3c2410-dt' and ↵Ben Dooks2011-11-011-8/+120
|\ \ | | | | | | | | | 'for-32/i2c/tegra-iomem' into for-linus/i2c-3.2
| | * i2c-s3c2410: Add device tree supportThomas Abraham2011-10-291-4/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add device tree probe support for Samsung's s3c2410 i2c driver. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * i2c-s3c2410: Keep a copy of platform data and use itThomas Abraham2011-10-291-4/+14
| |/ | | | | | | | | | | | | | | | | | | | | The platform data is copied into driver's private data and the copy is used for all access to the platform data. This simpifies the addition of device tree support for the i2c-s3c2410 driver. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* | i2c: irq: Remove IRQF_DISABLEDYong Zhang2011-10-291-1/+1
|/ | | | | | | | | | | | | | | | Since commit [c58543c8: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* i2c-s3c2410: Remove useless break codeJonghwan Choi2011-06-271-1/+0
| | | | | | Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* i2c-s3c2410: Fix typo 'i2s' -> 'i2c'Huisung Kang2011-06-271-3/+3
| | | | | | Signed-off-by: Huisung Kang <hs1218.kang@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* Merge branch 'for-2637/i2c/samsung' into next-i2cBen Dooks2010-10-281-1/+9
|\
| * i2c-s3c2410: Enable i2c clock only when doing some transfertArnaud Patard (Rtp)2010-10-211-1/+9
| | | | | | | | | | | | | | | | | | | | | | This patch modify the s3c2410 i2c driver behaviour to enable the i2c clock only when needed. I'm not sure if this has a big impact on power usage but at least it's fixing a bug with the uda1380 codec which needs to be hard reset'ed if the i2c clock is enabled before it's powered on (at least on h1940). Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* | i2c: Remove unneeded inclusions of <linux/i2c-id.h>Jean Delvare2010-10-241-1/+0
|/ | | | | | | | | | | These drivers don't use anything which is defined in <linux/i2c-id.h>. This header file was never meant to be included directly anyway, and will be deleted soon. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Dave Airlie <airlied@linux.ie> Cc: Hans Verkuil <hverkuil@xs4all.nl>
* i2c-s3c2410: fix calculation of SDA line delayMyungJoo Ham2010-10-011-2/+2
| | | | | | | | | | | | S3C2440 style I2C controller uses PCLK to calculate the SDA line delay. The driver wrongly assumed that this delay is calculated from the frequency that the controller is operating on. This patch fixes this issue. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* i2c: Use <linux/io.h> instead of <asm/io.h>H Hartley Sweeten2010-05-211-1/+1
| | | | | | | | As warned by checkpatch.pl, <linux/io.h> should be used instead of <asm/io.h>. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-s3c2410: Remove unconditional 1ms delay on each transferMark Brown2010-05-201-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | The S3C I2C controller indicates completion of I2C transfers before the bus has a stop condition on it. In order to ensure that we do not attempt to start a new transfer before the bus is idle the driver currently inserts a 1ms delay. This is vastly larger than is generally required and has a visible effect on performance under load, such as when bringing up audio CODECs or reading back status information with non-bulk I2C reads. Replace the sleep with a spin on the IIC status register for up to 1ms. This will busy wait but testing on my SMDK6410 system indicates that the overwhelming majority of transactions complete on the first spin, with maximum latencies of less than 10 spins so the absolute overhead of busy waiting should be at worst comprable to msleep(), and the overall system performance is dramatically improved. The main risk is poor interaction with multimaster systems where we may miss the bus going idle before the next transaction. Defend against this by falling back to the original 1ms delay after 20 spins. The overall effect in my testing is an approximately 20% improvement in kernel startup time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
OpenPOWER on IntegriCloud