summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/hwmon-vid.c
Commit message (Collapse)AuthorAgeFilesLines
* hwmon-vid: Ignore 6th VID pin of AMD family 0Fh processorsJean Delvare2009-09-151-1/+9
| | | | | | | | | | | | | | | | | | | We had a report about a mainboard for AMD family 0Fh processors not routing the 6th VID pin from the CPU to the hardware monitoring chip. While the vendor should have wired the pin (or, failing that, should have hardwired it to level high rather than low), the fact is that none of these processors are currently known to operate at the lower voltage levels which require the 6th VID pin. So, as a practical workaround, I propose to ignore the 6th VID pin for these CPUs. If this decision ever causes problems, we'll reconsider. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Frank Myhr <fmyhr@fhmtech.com> Tested-by: Hleb Valoshka <375gnu@gmail.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
* hwmon-vid: Add support for AMD family 10h CPUsJean Delvare2008-10-261-0/+1
| | | | | | | | The AMD family 10h CPUs use the same VID decoding table as the family 0Fh CPUs. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rudolf Marek <r.marek@assembler.cz>
* hwmon-vid: Fix AMD K8 VID decodingJean Delvare2008-08-151-8/+28
| | | | | | | | | | | | | | | | Not all AMD K8 have 6 VID pins, contrary to what was assumed in commit 116d0486bdefc11f71e567cadf0c47f788b4dd06. This commit broke support of older CPU models which have only 5 VID pins: http://bugzilla.kernel.org/show_bug.cgi?id=11329 We need two entries in the hwmon-vid table, one for 5-bit VID models (K8 revision <= E) and one for 6-bit VID models (K8 revision >= F). This fixes bug #11329. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Frank Myhr <fmyhr@fhmtech.com> Tested-by: Jean-Luc Coulon <jean.luc.coulon@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: (hwmon-vid) Add 6-bit vid codes for AMD NPT 0Fh cpusFrank Myhr2008-08-061-10/+8
| | | | | | | | | | | | | | | AMD NPT 0Fh cpus use 6 bit VID codes. Successive codes with msb 0 describe 25mV decrements, while those with msb 1 describe 12.5mV decrements. Existing hwmon-vid.c is correct only for codes with msb 0; add support for the codes with msb 1. Ref: p 309, Table 71 AMD Publication 32559, BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf Signed-off-by: Frank Myhr <fmyhr@fhmtech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (hwmon-vid) Trivial format multi-line comments per CodingStyleFrank Myhr2008-08-061-69/+71
| | | | | Signed-off-by: Frank Myhr <fmyhr@fhmtech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* x86: convert cpuinfo_x86 array to a per_cpu arrayMike Travis2007-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | cpu_data is currently an array defined using NR_CPUS. This means that we overallocate since we will rarely really use maximum configured cpus. When NR_CPU count is raised to 4096 the size of cpu_data becomes 3,145,728 bytes. These changes were adopted from the sparc64 (and ia64) code. An additional field was added to cpuinfo_x86 to be a non-ambiguous cpu index. This corresponds to the index into a cpumask_t as well as the per_cpu index. It's used in various places like show_cpuinfo(). cpu_data is defined to be the boot_cpu_data structure for the NON-SMP case. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* hwmon-vid: Don't spam the logs when VRM version is missingJean Delvare2007-05-271-1/+3
| | | | | | | | | If we cannot guess which VRM version the CPU uses, we set it to 0 and log it. So we shouldn't spam the log each time vid_from_reg() is later called with vrm 0. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Rudolf Marek <r.marek@assembler.cz>
* hwmon-vid: Add support for VIA EstherRudolf Marek2007-05-081-3/+3
| | | | | | | | Update the VID type for certain VIA processors and remove the Itanium entries. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Fix the VRD 11 decodingJean Delvare2007-01-181-1/+1
| | | | | | I wonder how we came up with such a broken test in the first place. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Update Rudolf Marek's e-mail addressJean Delvare2006-12-121-2/+2
| | | | | | | The Silicon Hill club is not what it used to be. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] hwmon-vid: Add support for Intel Core and ConroeRudolf Marek2006-06-221-7/+28
| | | | | | | | | This patch adds support for two new VID codes, supporting Intel mobile Core processors and new Conroe based platforms. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] HWMON: Trim VID values to correct number of bitsRudolf Marek2006-06-221-1/+8
| | | | | | | | | Following patch trims the VID value to correct number of bits for each VRM. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Support the Pentium M VID codeJean Delvare2006-03-231-1/+8
| | | | | | | | Add support for the Intel Pentium M series to the hwmon-vid driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: add VRM/VID support for some VIA CPUsRudolf Marek2006-01-051-27/+42
| | | | | | | | | | | | This patch adds the VIA CENTAUR CPUs to detection table. Table was updated to treat future Intel x86 CPUs as VRD10. Stepping field was added, because some VIA CPUs have different VRM specs across stepping. I changed the vrm type to u8 because all drivers use u8 anyway. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: VID table updateR.Marek@sh.cvut.cz2005-09-051-1/+4
| | | | | | | | This patch updates the VID entries, so any future Intel CPU will be detected as unknown rather than 9.0 Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (10/11)Jean Delvare2005-09-051-0/+82
| | | | | | | | | | | | | | I see very little reason why vid_from_reg is inlined. It is not exactly short, its parameters are seldom known in advance, and it is never called in speed critical areas. Uninlining it should cause little performance loss if any, and saves a signficant space as well as compilation time. As suggested by Alexey Dobriyan, I am leaving vid_to_reg inline for now, as it is short and has a single user so far. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (08/11)Jean Delvare2005-09-051-10/+11
| | | | | | | | Cleanup hwmon-vid a bit, fixing typos, rewording some comments and reindenting properly at places. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (07/11)Jean Delvare2005-09-051-0/+103
The only part left in i2c-sensor is the VRM/VRD/VID handling code. This is in no way related to i2c, so it doesn't belong there. Move the code to hwmon, where it belongs. Note that not all hardware monitoring drivers do VRM/VRD/VID operations, so less drivers depend on hwmon-vid than there were depending on i2c-sensor. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud