summaryrefslogtreecommitdiffstats
path: root/drivers/hid
Commit message (Collapse)AuthorAgeFilesLines
*-. Merge branches 'roccat', 'upstream' and 'wiimote' into for-linusJiri Kosina2011-07-2219-51/+1289
|\ \
| | * HID: wiimote: Add sysfs support to wiimote driverDavid Herrmann2011-07-111-0/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add sysfs files for each led of the wiimote. Writing 1 to the file enables the led and 0 disables the led. We do not need memory barriers when checking wdata->ready since we use a spinlock directly after it. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Cache wiimote led stateDavid Herrmann2011-07-111-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Save the current state of the leds in the wiimote data structure. This allows us to discard new led requests that wouldn't change anything. Protect the whole state structure by a spinlock. Every wiiproto_* function expects this spinlock to be held when called. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Add wiimote led requestDavid Herrmann2011-07-111-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | Add new request that sets the leds on the target device. Also, per default, set led1 after initializing a device. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Add wiimote input button parserDavid Herrmann2011-07-111-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Parse input report 0x30 from the wiimote as button input. We need to send events for all buttons on every input report because the wiimote does not send events for single buttons but always for all buttons to us. The input layer, however, filters redundant events. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Add wiimote event handlerDavid Herrmann2011-07-111-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | Create array of all event handlers and call each handler when we receive the related event. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Add output queue for wiimote driverDavid Herrmann2011-07-111-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The raw hid output function that is supported by bluetooth low-level hid driver does not provide an output queue and also may sleep. The wiimote driver, though, may need to send data in atomic context so this patch adds a buffered output queue for the wiimote driver. We use the shared workqueue to send our buffer to the hid device. There is always only one active worker which flushes the whole output queue to the device. If our queue is full, every further output is discarded. Special care is needed in the deinitialization routine. When wiimote_hid_remove is called, HID input is already disabled, but HID output may still be used from our worker and is then discarded by the lower HID layers. Therefore, we can safely disable the input layer since it is the only layer that still sends input events. Future sysfs attributes must be freed before unregistering input to avoid the sysfs handlers to send input events to a non-existing input layer. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Add wiimote send functionDavid Herrmann2011-07-111-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The wiimote driver needs to send raw output reports to the wiimote device. Otherwise we could not manage the peripherals of the wiimote or perform memory operations on the wiimote. We cannot use hidinput_input_event of the lowlevel hid driver, since this does not accept raw input. Therefore, we need to use the same function that hidraw uses to send output. Side effect is, the raw output function is not buffered and can sleep. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Synchronize wiimote input and hid event handlingDavid Herrmann2011-07-111-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | The wiimote first starts HID hardware and then registers the input device. We need to synchronize the startup so no event handler will start parsing events when the wiimote device is not ready, yet. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Register input device in wiimote hid driverDavid Herrmann2011-07-111-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Register input device so the wiimote can report input events on it. We do not use HIDINPUT because the wiimote does not provide any descriptor table which might be used by HIDINPUT. So we avoid having HIDINPUT parse the wiimote descriptor and create unrelated or unknown event flags. Instead we register our own input device that we have full control of. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Add wiimote device structureDavid Herrmann2011-07-111-2/+39
| | | | | | | | | | | | | | | | | | | | | | | | Allocate wiimote device structure with all wiimote related data when registering new wiimote devices. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Register wiimote hid driver stubDavid Herrmann2011-07-113-1/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The wiimote uses a fake HID protocol. Hence, we need to prevent HIDINPUT and HIDDEV from parsing wiimote data and instead parse raw hid events. Add VID/PID to hid-core so the special driver is loaded on new wiimotes. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: Add Nintendo Wii Remote driver stubDavid Herrmann2011-07-113-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add stub driver for the Nintendo Wii Remote. The wii remote uses the HID protocol to communicate with the host over bluetooth. Hence, add dependency for HIDP and place driver in hid subsystem. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: hid-multitouch: add support for a new Lumio dual-touch panelBenjamin Tissoires2011-06-243-0/+5
| | | | | | | | | | | | | | | Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: hid-multitouch: correct VID for Stantum panelsBenjamin Tissoires2011-06-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | while merging hid-stantum into hid-multitouch, I did not correctly copy/paste the VIDs for those devices. This patch fixes it. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: hid-multitouch: ensure slots are initializedBenjamin Tissoires2011-06-241-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case a device does not provide the feature "Maximum Contact Count", or set it at 0, the maxcontacts field may be at 0 while calling input_mt_init_slots. This patch ensures that hid-multitouch will allways report ABS_MT_SLOT and ABS_MT_TRACKING_ID to the user space. This corrects a bug found with some Ilitek devices that has been integrated in 3.0-rc0. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * Revert "HID: magicmouse: ignore 'ivalid report id' while switching modes"Jiri Kosina2011-06-161-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 23746a66d7d9e73402c68ef00d708796b97ebd72. It turned out that the actual reason for failure is not the device firmware, but bug in Bluetooth stack, which will be fixed by patch by Ville Tervo which corrects the mask handling for CSR 1.1 Dongles. Reported-and-tested-by: Ed Tomlinson <edt@aei.ca> Reported-and-tested-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: hid-multitouch: fix broken eGalaxBenjamin Tissoires2011-06-121-18/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the inclusion of eGalax devices in 2.6.39, I've got some bug reports for 480d and other devices. The problem lies in the reports descriptors: eGalax supports both pen and fingers, and so the reports descriptors contained both. But hid-multitouch relies on them to detect the last item in each field to send the multitouch events. In 480d, the last item is not Y as it should but Pressure. That means that the fields are not aligned and X,Y are at 0,0 (the other touch coordinates of the report). With this patch, the detection is made only when the field ContactID has been detected inside the collection. There is still a problem with the detections of the range as stylus and fingers may not have the same min/max, but it's a start. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: hid-multitouch: add support for Chunghwa multi-touch panelAustin Zhang2011-06-074-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Added Chunghwa hid multitouch panel support into hid-multitouch. Signed-off-by: Austin Zhang <zhang.austin@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: hiddev: fix use after free in hiddev_releaseDan Carpenter2011-05-261-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | There are a couple use after free bugs here. Signed-off-by: Dan Carpenter <error27@gmail.com> [jkosina@suse.cz: removed already fixed hunk] Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: add quirk for HyperPen 10000UJimmy Hon2011-05-242-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add 5543:0064 UC-Logic Technology Corp. Aiptek HyperPen 10000U to quirks with HID_QUIRK_MULTI_INPUT. Originally the device is reporting the x,y coordinates on Z and RX. By adding this quirk, there will be two kernel devices. The first one is muted and the second device will report coordinates on X and Y. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: hiddev: fix potential use-after-freeJiri Kosina2011-05-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6cb4b040795 ("HID: hiddev: fix race between hiddev_disconnect and hiddev_release") made it possible to access hiddev (for unlocking the existance mutex) once hiddev has been kfreed. Change the order so that this can not happen (always unlock the mutex first, it is needed only to protect access to ->exist and ->open). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: fix support for Microsoft comfort mouse 4500Jiri Kosina2011-07-221-0/+1
| | | | | | | | | | | | | | | | | | Add forgotten entry into the global blacklist. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: hid-multitouch: add one new multitouch device's VID/PIDice chien2011-07-214-0/+9
| | | | | | | | | | | | | | | | | | | | | This patch adds support for the CSR panel built by XAT. Signed-off-by: Ice Chien <ice.chien@accupoint.com.tw> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: prodikeys: remove a redundant forward declaration of struct pcmidi_sndAxel Lin2011-07-211-2/+0
| | | | | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: prodikeys: make needlessly global symbols staticAxel Lin2011-07-211-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following symbols are not referenced outside this file so there's no need for it to be in the global name space. pcmidi_sustained_note_release init_sustain_timers stop_sustain_timers pcmidi_handle_report pcmidi_setup_extra_keys pcmidi_snd_initialise pcmidi_snd_terminate Make them static. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: emsff: properly handle emsff_init failureAxel Lin2011-07-201-1/+6
| | | | | | | | | | | | | | | | | | | | | emsff_init() may fail, let's properly handle the failure. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: ACRUX - add missing hid_hw_stop() in ax_probe() error pathAxel Lin2011-07-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | hid_hw_stop() must be called in ax_probe() error path if hid_hw_start() was successful. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: fix horizontal wheel for ms comfort mouse 4500Ari Savolainen2011-07-122-5/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Microsoft comfort mouse 4500 report descriptor contains duplicate usages for horizontal wheel. This patch fixes the wrong mapping caused by that. Signed-off-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: uclogic: Add support for UC-Logic WP1062Nikolai Kondrashov2011-07-113-0/+197
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for UC-Logic Tablet WP1062 by fixing its report descriptor. This tablet is sold as Monoprice 10X6.25 Inches Graphic Drawing Tablet. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: add FF support for Holtek On Line Grip based gamepadsAnssi Hannula2011-06-275-0/+259
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add force feedback support for Holtek On Line Grip based HID devices. The protocol is more complex than that of most other rumblepads, but the device still needs to be handled as a memoryless one. Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Cleber de Mattos Casali <clebercasali@yahoo.com.br> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: add support for MS Digital Media 3000Jiri Kosina2011-06-143-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Digital Media 3000 keyboard (USB id: 0x0730) features the same 1-5 Application Launch keys that the Natural Ergonomic 4000 has. Add its usb id to the list of quirks. Reported-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: hid-sony: fix endiannes of Sixaxis accel/gyro valuesSimon Wood2011-06-131-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The accelerometers/gyro on the Sixaxis are reported in the wrong endianness (ie. not compatible with HID), so this patch intercepts the report and swaps the appropriate bytes over. Accelerometers are scaled with a nominal value of +/-4000 = 1G, maximum value would be around +/-32768 = 8G. Gyro on my device always reports -32768, might need some calibration set within the controller. Fix extracted from previous patch submission: https://patchwork.kernel.org/patch/95212/ Signed-off-by: Marcin Tolysz <tolysz@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: hid-sony: amend Sixaxis descriptor to enable accelerometersSimon Wood2011-06-131-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the HID descriptor of the Sixaxis controller to allow the reporting of the accelerometers and gyro via a joystick axis. Rewrite section from offset 83: -- 0x75, 0x08, /* Report Size (8), */ /* all the other data lumped together */ 0x95, 0x27, /* Report Count (39), */ 0x09, 0x01, /* Usage (Pointer), */ 0x81, 0x02, /* Input (Variable), */ 0x75, 0x08, /* Report Size (8), */ 0x95, 0x30, /* Report Count (48), */ 0x09, 0x01, /* Usage (Pointer), */ /* Note Output */ 0x91, 0x02, /* Output (Variable), */ 0x75, 0x08, /* Report Size (8), */ 0x95, 0x30, /* Report Count (48), */ 0x09, 0x01, /* Usage (Pointer), */ /* Note Feature */ 0xB1, 0x02, /* Feature (Variable), */ -- with -- /* last 2 not used... */ 0x95, 0x13, /* Report Count (19), */ 0x09, 0x01, /* Usage (Pointer), */ 0x81, 0x02, /* Input (Variable), */ /* Padding */ 0x95, 0x0C, /* Report Count (12), */ 0x81, 0x01, /* Input (Constant), */ 0x75, 0x10, /* Report Size (16), */ 0x95, 0x04, /* Report Count (4), */ 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ 0x46, 0xFF, 0x03, /* Physical Maximum (1023), */ 0x09, 0x01, /* Usage (Pointer), */ 0x81, 0x02, /* Input (Variable), */ -- Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: Add driver to fix Speedlink VAD Cezanne supportStefan Kriwanek2011-06-085-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one place to another every now and then. The issue are relative motion events erroneously reported by the device, each having a distance value of +256. This 256 can in fact never occur due to real motion, therefore those events can safely be ignored. The driver also drops useless EV_REL events with a value of 0, that the device sends every time it sends an "real" EV_REL or EV_KEY event. Signed-off-by: Stefan Kriwanek <mail@stefankriwanek.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: Fix Logitech Driving Force Pro wheelMichael Bauer2011-06-071-1/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add the quirk "NOGET" to make the wheel work at all in native mode. - Replace the somehow broken report descriptor with a custom one to have separate throttle and brake axes. As there are significant differences in the descriptor (original descriptor "hides" the separate axes in a 24 bit FF00 usagepage, new descripter replaces that with two individual 8 bit desktop.y and desktop.rz usages) I provided a complete replacement descriptor instead trying to patch the original one. Patching the descriptor seems not feasible as the new one is much larger. Note: To actually test this you have to use the tool "ltwheelconf" to put the DFP into it's native mode - See below for more info. Background: Most Logitech wheels are initially reporting themselves with a "fallback" deviceID (USB_DEVICE_ID_LOGITECH_WHEEL - 0xc294), in order to make sure they are working even without having the proper driver installed. If the Logitech driver is installed it sends a special command to the wheel which sets the wheel to "native mode", enabling enhance features like: - Clutch pedal - extended wheel rotation range (up to 900 degrees) - H-gate shifter - separate axis for throttle / brake - all buttons When the wheel is set to native mode it basically disconnects and reconnects with a different deviceID (USB_DEVICE_ID_LOGITECH_DFP_WHEEL - 0xc298 in this case). I am working on a userspace tool [1] which does the switching from fallback to native mode. During development I found out that the Driving Force Pro wheel is not supported in native mode - quierk NOGET is missing and the throttle and brake axes are reported in a combined way only. Signed-off-by: Michael Bauer <michael@m-bauer.org> Signed-off-by: Simon Wood <simon@mungewell.org> [1] https://github.com/TripleSpeeder/LTWheelConf Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: yurex: recognize GeneralKeys wireless presenter as generic HIDTomoki Sekiyama2011-06-072-1/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unfortunately, the device seems to have the same Vendor ID and Product ID as YUREX leg-shakes sensors, and the commit 6bc235a2e2 ("USB: add driver for Meywa-Denki & Kayac YUREX") added the ID to hid_ignore_list. I believe that we can distinguish YUREX and the Wireless Presenter by device type. The patch below makes the driver ignore only YUREX (bInterfaceProtocol==0), and recognize Wireless Presenter (bInterfaceProtocol is keyboard or mouse) as generic HID. (I don't have the Wireless Presenter, so not yet ested.) ** YUREX lsusb information: Bus 002 Device 007: ID 0c45:1010 Microdia Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0c45 Microdia idProduct 0x1010 bcdDevice 0.03 iManufacturer 1 JESS iProduct 2 YUREX iSerial 3 10000269 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 31 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26922 Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Greg KH <gregkh@suse.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Maciej Rutecki <maciej.rutecki@gmail.com> Reported-by: Thomas B?chler <thomas@archlinux.org> Tested-by: Thomas B?chler <thomas@archlinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: roccat: fix NULL pointer dereference, add range checksStefan Achatz2011-06-135-3/+21
| | | | | | | | | | | | | | | | | | | | | | On rare occassions raw events can be triggered before drvdata gets set up which leads to NULL pointer dereferences. This was only observed with pyra on 2.6.39, but is fixed for all devices now to play it save. kovaplus returned wrong actual values when profile change was initiated from host. Added range checks for setting actual profile on all devices. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: roccat: correction and cleanup of HID feature reportsStefan Achatz2011-06-1312-107/+107
| | | | | | | | | | | | | | | | | | Removed analog feature report enums and modified code in roccat_common to reflect this. Non standard conform Kone got its own copy of the old code. That helps extracting more generalizations for newer devices. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: roccat: chang Kconfig menu to submenu for roccat devicesStefan Achatz2011-06-131-10/+7
| | | | | | | | | | | | | | | | As module roccat is needed by all devices, it's the toplevel menu entry with all devices dependent. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: roccat: Add "Roccat Talk" support for koneplusStefan Achatz2011-06-132-0/+22
|/ | | | | | | | Added binary sysfs attribute to support new functionality the manufacturer added to koneplus. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'usb-next' of ↵Linus Torvalds2011-05-232-2/+39
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits) USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h USB: UHCI: Support big endian GRUSBHC HC sparc: add {read,write}*_be routines USB: UHCI: Add support for big endian descriptors USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier USB: UHCI: Add support for big endian mmio usb-storage: Correct adjust_quirks to include latest flags usb/isp1760: Fix possible unlink problems usb/isp1760: Move function isp1760_endpoint_disable() within file. USB: remove remaining usages of hcd->state from usbcore and fix regression usb: musb: ux500: add configuration and build options for ux500 dma usb: musb: ux500: add dma glue layer for ux500 usb: musb: ux500: add dma name for ux500 usb: musb: ux500: add ux500 specific code for gadget side usb: musb: fix compile error usb-storage: fix up the unusual_realtek device list USB: gadget: f_audio: Fix invalid dereference of initdata EHCI: don't rescan interrupt QHs needlessly OHCI: fix regression caused by nVidia shutdown workaround USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage ...
| * USB: ldusb: add several new devicesMichael Hund2011-05-032-2/+39
| | | | | | | | | | | | | | Added several new devices to ldusb and excluded them from the HID driver. Signed-off-by: Michael Hund <mhund@ld-didactic.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| |
| \
| \
| \
*---. \ Merge branches 'doc', 'multitouch', 'upstream' and 'upstream-fixes' into ↵Jiri Kosina2011-05-2325-1352/+485
|\ \ \ \ | | | | | | | | | | | | | | | for-linus
| | | * | HID: magicmouse: ignore 'ivalid report id' while switching modesJiri Kosina2011-05-201-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device reponds with 'invalid report id' when feature report switching it into multitouch mode is sent to it. This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK on Sent Reports"), but since this commit, it propagates -EIO from the _raw callback . So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's how the device reacts in normal mode. Sad, but following reality. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022 Tested-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * | HID: fix a crash in hid_report_raw_event() function.Armando Visconti2011-05-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm using a Data Modul EasyTouch USB multitouch controller, which is issuing a hid report with a size equals to 0. The rsize value gets set to 536870912 and Linux is crashing in the memset because the value is too big. Signed-off-by: Armando Visconti <armando.visconti@st.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * | HID: add support for Logitech G27 wheelPeter Gundermann2011-05-034-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Gere's a small patch to add support for the Logitech G27 wheel, since the prior patch only added FF support for the Driving Force Pro and G25. The patch contains the changes from the G25 and DFP, too. I tested the changes with wine/LFS and got full support for all axes and buttons. Signed-off: Peter Gundermann <slim-one@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * | HID: hiddev: fix error path in hiddev_read when interruptedPeter Waechtler2011-04-291-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hiddev_read: in case mutex_lock_interruptible will be interrupted remove the task from the wait queue. Signed-off-by: Peter Waechtler <pwaechtler@mac.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * | HID: add support for Sony Navigation ControllerJiri Kosina2011-04-283-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sony Navigation Controller needs a special report to be sent to it before it is able to operate, the same way as other Sony controllers do. Tested-by: Jacek Lukas Wotka <jlw@team-fatal.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * | HID: add support for barcode scanners from Symbol TechnologiesJiri Kosina2011-04-262-0/+6
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | Barcode handheld scanners produced by Symbol Technologies (0x05e0/0x0800 and 0x05e0/0x1300) need HID_QUIRK_NOGET, otherwise their firmware exposes trouble during enumeration/initialization. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
OpenPOWER on IntegriCloud