summaryrefslogtreecommitdiffstats
path: root/drivers/hid/hid-ids.h
Commit message (Collapse)AuthorAgeFilesLines
* HID: usbhid: Add quirks for Mayflash/Dragonrise GameCube and PS3 adaptersMarcel Hasler2016-11-031-2/+4
| | | | | | | | | | | All known gamepad adapters by Mayflash (identified as Dragonrise) need HID_QUIRK_MULTI_INPUT to split them up into four input devices. Without this quirk those adapters are falsely recognized as tablets. Fixes bug 115841 (https://bugzilla.kernel.org/show_bug.cgi?id=115841). Signed-off-by: Marcel Hasler <mahasler@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: add quirk for Akai MIDImix.Steinar H. Gunderson2016-10-101-0/+3
| | | | | | | | | | | | | | | The Akai MIDImix (09e8:0031) is a MIDI fader controller that speaks regular MIDI and works well with Linux. However, initialization gets delayed due to reports timeout: [3643645.631124] hid-generic 0003:09E8:0031.0020: timeout initializing reports [3643645.632416] hid-generic 0003:09E8:0031.0020: hiddev0: USB HID v1.11 Device [AKAI MIDI Mix] on usb-0000:00:14.0-2/input0 Adding "usbhid.quirks=0x09e8:0x0031:0x20000000" on the kernel command line makes the issues go away. Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*---. Merge branches 'for-4.8/upstream-fixes', 'for-4.9/alps', ↵Jiri Kosina2016-10-071-1/+9
|\ \ \ | | | | | | | | | | | | 'for-4.9/hid-input', 'for-4.9/intel-ish', 'for-4.9/kye-uclogic-waltop-fixes', 'for-4.9/logitech', 'for-4.9/sony', 'for-4.9/upstream' and 'for-4.9/wacom' into for-linus
| | | * HID: support for keyboard - Corsair STRAFEMarian Krivoš2016-09-191-0/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | Add quirk for Corsair STRAFE keyboard, similarly to what we've been doing for other CORSAIR devices already, in order to avoid long delays during boot. [jkosina@suse.cz: reword changelog a little bit] Signed-off-by: Marian Krivos <marian.krivos@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: uclogic: Support UGTizer GP0610 partiallyNikolai Kondrashov2016-09-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add partial support for the UGTizer GP0610 tablet (aka iBall PF1064U, aka UGTizer GT1060) to the hid-uclogic.c driver. The pen input is supported fully, but frame buttons and wheel don't work yet. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: uclogic: Add support for several more tabletsNikolai Kondrashov2016-09-191-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add more product IDs to hid-uclogic.c driver to support several more tablet models, including: UC-Logic DrawImage G3 aka Ugee G3 UC-Logic SP1001 aka Ugee SP1001 aka Yiynova UC-Logic SP-1001 Ugee 1000L Ugee M708 Yiynova DP10U aka Yiynova DP10U+ Yiynova MSP19U Yiynova MSP19U+ Yiynova MVP10U aka Yiynova MVP10U IPS Yiynova MVP10UHD+IPS Yiynova MVP22U+ Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: kye: Rename MousePen i608X v2 macroNikolai Kondrashov2016-09-191-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the device ID macro for the second version of KYE MousePen i608x graphics tablet to have "V" in its name to signify that "2" is a version. I.e. USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2 -> USB_DEVICE_ID_KYE_MOUSEPEN_I608X_V2 This also makes applying additional fixes from DIGImend easier. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: microsoft: Add Surface 4 type cover pro 4 (JP)Yuta Kobayashi2016-08-171-0/+1
| | | | | | | | | | | | | | Adding support for the Microsoft Surface 4 Type Cover Pro (JP). Signed-off-by: Yuta Kobayashi <alu.ula@outlook.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: Add a new Saitek mouse device ID (RAT 9)Mayeul Cantan2016-08-021-0/+1
|/ | | | | | | | | | | | The new device has 06a3:0cfa as identifiers, and the same quirks as the other RAT models. It needs this fix in order not to confuse the xorg server with its tristate button, which is reported as three different buttons, one of which is always on. [jkosina@suse.cz: drop unrelated whitespace hunk] Signed-off-by: Mayeul Cantan <mayeul.cantan@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'for-4.8/hid-led' into for-linusJiri Kosina2016-07-281-0/+6
|\ | | | | | | | | Conflicts: drivers/hid/hid-thingm.c
| * HID: hid-led: add support for Greynut LuxaforHeiner Kallweit2016-07-071-0/+1
| | | | | | | | | | | | | | | | | | | | Add support for Greynut Luxafor. This device has two groups of three independent LED's each. Successfully tested with such a device. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: hid-led: add support for Delcom Visual Signal Indicator G2Heiner Kallweit2016-07-071-0/+3
| | | | | | | | | | | | | | | | | | | | Add support for the HID-compliant Delcom Visual Signal Indicator generation 2 devices. Successfully tested with part no 904000 from the family of these devices. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: migrate USB LED driver from usb misc to hidHeiner Kallweit2016-06-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch migrates the USB LED driver to the HID subsystem. Supported are Dream Cheeky Webmail Notifier / Friends Alert and Riso Kagaku Webmail Notifier. Benefits: - Avoid using USB low-level calls and use the HID subsystem instead (as this device provides a USB HID interface) - Use standard LED subsystem instead of proprietary sysfs entries, this allows e.g. to use the device with features like triggers Successfully tested with a Dream Cheeky Webmail Notifier and a Riso Kagaku Webmail Notifier compatible device. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| |
| \
*-. \ Merge branches 'for-4.8/alps', 'for-4.8/apple', 'for-4.8/i2c-hid', ↵Jiri Kosina2016-07-281-0/+1
|\ \ \ | | |/ | | | | | | 'for-4.8/uhid-offload-hid-device-add' and 'for-4.8/upstream' into for-linus
| * | HID: add usb device id for Apple Magic KeyboardJean-Gabriel Gill-Couture2016-07-111-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | USB device Vendor 05ac (Apple) Device 0267 (Magic Keyboard) This keyboard supports both Bluetooth and USB connections, this patch only covers USB. Thanks to Maxime Poulin <maxpoulin64@gmail.com> Signed-off-by: Jean-Gabriel Gill-Couture <jeangab@jeangab.fr.nf> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: alps: a few cleanupsMasaki Ota2016-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Remove an unnecessary codes. Change input_ivent() function to appropriate function. Add the device ID of "HID_DEVICE_ID_ALPS_U1_DUAL". [jkosina@suse.cz: removed unnecessary bitshifts of values passed input_report_key() as spotted by Dmitry] Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: add Alps I2C HID Touchpad-Stick supportMasaki Ota2016-06-171-0/+2
|/ | | | | | | Add support Alps I2C HID Touchpad and Stick device. Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'for-4.7/upstream' into for-linusJiri Kosina2016-05-171-0/+7
|\ | | | | | | | | Conflicts: drivers/hid/usbhid/hid-quirks.c
| * HID: usbhid: quirks for Corsair RGB keyboard & mice (K70R, K95RGB, M65RGB, ↵Trent Lloyd2016-04-271-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | K70RGB, K65RGB) These devices feature multiple interfaces/endpoints: a legacy BIOS/boot interface (endpoint 0x81), as well as 2 corsair-specific keyboard interfaces (endpoint 0x82, 0x83 IN/0x03 OUT) and an RGB LED control interface (endpoint 0x84 IN/0x04 OUT) Because the extra 3 interfaces are not of subclass USB_INTERFACE_SUBCLASS_BOOT, HID_QUIRK_NOGET is not automatically set on them and a 10s timeout per-endpoint (30s per device) occurs initialising reports on boot. We configure HID_QUIRK_NO_INIT_REPORTS for these devices. Additionally the left-side G1-G18 macro keys on the K95RGB generate output on the un-opened 0x82/0x83 endpoints which causes the keyboard to stop responding waiting for this event to be collected. We enable HID_QUIRK_ALWAYS_POLL to prevent this situation from occurring. Signed-off-by: Trent Lloyd <trent@lloyd.id.au> Tested-by: SUGNIAUX Wilfried <wsu@ppharm2k20.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| |
| \
| \
| \
*---. \ Merge branches 'for-4.6/upstream-fixes', 'for-4.7/asus', 'for-4.7/hidraw' ↵Jiri Kosina2016-05-171-0/+1
|\ \ \ \ | | | |/ | | |/| | | | | and 'for-4.7/thingm' into for-linus
| * | | HID: asus: add support for VivoBook E200HAYusuke Fujimaki2016-04-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Asus X205TA and E200HA built-in keyboard contain wrong logical maximum value in report descriptor. This patch correct wrong logical maximum in report descriptor. Signed-off-by: Yusuke Fujimaki <usk.fujimaki@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | HID: Asus X205TA keyboard driverYusuke Fujimaki2016-04-011-0/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Asus X205TA built-in keyboard contains wrong logical maximum value in report descriptor. 0x05, 0x01, // Usage Page (Generic Desktop) 0x09, 0x06, // Usage (Keyboard) 0xa1, 0x01, // Collection (Application) 0x85, 0x01, // Report ID (1) 0x05, 0x07, // Usage Page (Keyboard/Keypad) 0x19, 0xe0, // Usage Minimum (224) 0x29, 0xe7, // Usage Maximum (231) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x01, // Logical Maximum (1) 0x75, 0x01, // Report Size (1) 0x95, 0x08, // Report Count (8) 0x81, 0x02, // Input (Data,Array,Abs) 0x95, 0x01, // Report Count (1) 0x75, 0x08, // Report Size (8) 0x81, 0x03, // Input (Const,Var,Abs) 0x95, 0x05, // Report Count (5) 0x75, 0x01, // Report Size (1) 0x05, 0x08, // Usage (LED) 0x19, 0x01, // Usage Minimum (1) 0x29, 0x05, // Usage Maximum (5) 0x91, 0x02, // Output (Data,Var,Abs) 0x95, 0x01, // Report Count (1) 0x75, 0x03, // Report Size (3) 0x91, 0x03, // Output (Const,Var,Abs) 0x95, 0x06, // Report Count (6) 0x75, 0x08, // Report Size (8) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x65, // Logical Maximum (101) * too small * 0x05, 0x07, // Usage Page (Keyboard/Keypad) 0x19, 0x00, // Usage Minimum (0) 0x29, 0xdd, // Usage Maximum (221) 0x81, 0x00, // Input(Data,Array,Abs) In Asus X205TA japanese keyboard model,there are language specific keys over usage id 101. This patch correct wrong logical maximum in report descriptor. Signed-off-by: Yusuke Fujimaki <usk.fujimaki@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | HID: Fix boot delay for Creative SB Omni Surround 5.1 with quirkNazar Mokrynskyi2016-04-251-0/+1
| |/ |/| | | | | | | | | | | | | | | Needed for v2 of the device firmware, otherwise kernel will stuck for few seconds and throw "usb_submit_urb(ctrl) failed: -1" early on system boot. Signed-off-by: Nazar Mokrynskyi <nazar@mokrynskyi.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: microsoft: add support for 3 more devicesAlistair Leslie-Hughes2016-04-041-0/+3
|/ | | | | | | | | | | Adds support for the Micrsift Digital 4K, Media 600 and Media 3000 V1 Keyboards, which have the same quirks as the already existing hardware MS_NE4K. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=52841 [jkosina@suse.cz: rephrase changelog] Signed-off-by: Alistair Leslie-Hughes <leslie_alistair@hotmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*-----. Merge branches 'for-4.5/upstream-fixes', 'for-4.6/cmedia', ↵Jiri Kosina2016-03-171-1/+6
|\ \ \ \ | | | | | | | | | | | | | | | 'for-4.6/i2c-hid', 'for-4.6/logitech', 'for-4.6/multitouch', 'for-4.6/penmount', 'for-4.6/sony', 'for-4.6/thingm', 'for-4.6/upstream' and 'for-4.6/wacom' into for-linus
| | | | * HID: microsoft: Add ID for MS Wireless Comfort KeyboardSlava Bacherikov2016-03-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Microsoft Wireless Comfort Keyboard has vendor specific My Favorites 1-5 keys. Linux already supports this buttons on other MS keyboards by MS_ERGONOMY quirk. So apply MS_ERGONOMY quirk to USB PID 0x00e3 (Microsoft Wireless Optical Desktop Receiver 3.0A). After this My Favorites 1..5 keys will be reported as KEY_F14..KEY_F15 events. Signed-off-by: Slava Bacherikov <slava@bacher09.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | * HID: usbhid: Fix incorrect product id of old 4nes4snesRaphael Assenat2016-01-251-1/+1
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | The correct product ID for the old version of the raphnet 4nes4snes device was 0x0a9d, not 0x0a8d. Signed-off-by: Raphael Assenat <raph@raphnet.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * HID: sony: Add nyko core controller supportScott Moreau2016-01-181-0/+3
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds rumble and LED support for nyko core controllers using the sino lite chip vendor:1345 product:3008, for PS3. Setting operational mode and output reports are the same as sixaxis but the input report has a different format since the PS3 accepts HID usb devices. For it to work, an exception is needed to skip overriding the report descriptor and use the original one. Signed-off-by: Scott Moreau <oreaus@gmail.com> Acked-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: Support for CMedia CM6533 HID audio jack controlsBen Chen2016-03-021-0/+1
| |/ | | | | | | | | | | | | | | | | | | The C-Media CM6533 is a USB audio chip featuring it's jack detection capability.The device originates an interrupt transfer via HID interface each time when a jack event occurs. The purpose of this patch is to handle hid raw events to keep the operating system informed of user interactions. Signed-off-by: Ben Chen <ben_chen@bizlinktech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard2Daniel Bristot de Oliveira2016-03-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID 1a2c:0027 does not seem to be handling the reports initialization very well. This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel when connected, and a delay before its initialization. It can also cause the hang the system. This patch adds the quirk for this device, which causes the delay to disappear. It is named as "USB Keykoard2" because the "USB Keykoard" already exists. Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: quirks: Add no_init_reports for AKAI midi controllerStafford Horne2016-01-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | The midi controller times-out while initializing reports, this causes boot to take an extra 10 seconds. The device descriptor advertises that it has an internal HID device but seems to not actually do anything useful. Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: add HID_QUIRK_NOGET to Quanta 3003 tooBenjamin Tissoires2016-01-211-0/+1
|/ | | | | | | | | | | | | dmesg shows a lot of: [ 1374.890348] hid-multitouch 0003:0408:3003.0007: usb_submit_urb(ctrl) failed: -1 [ 1384.916388] hid-multitouch 0003:0408:3003.0007: usb_submit_urb(ctrl) failed: -1 [ 1384.916432] hid-multitouch 0003:0408:3003.0007: timeout initializing reports Add the quirk and make the touchscreen happy. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Jim lovell <jimlovell777@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'for-linus' of ↵Linus Torvalds2016-01-141-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - appoint Benjamin Tissoires as co-maintainer / designated reviewer - sysfs report_descriptor visibility fix for unclaimed devices, from Andy Lutomirski - suspend/resume fixes for Sony driver from Frank Praznik - IRQ deadlock fix from Ioan-Adrian Ratiu - hid-i2c fixes affecting (at least) Yoga 900 from Mika Westerberg and Srinivas Pandruvada - a lot of new device support (especially, but not limited to, Wacom) and assorted small misc fixes - almost complete G920 support; the only bit that is missing is switching the device to HID mode automatically; Simon Wood and Michal Maly are working on it. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (46 commits) Revert "INPUT: xpad: switch Logitech G920 Wheel into HID mode" HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE Chips HID: Add new PID for Microchip Pick16F1454 HID: wacom: Use correct report to query pen ID from INTUOSHT2 devices HID: i2c-hid: Prevent sending reports from racing with device reset HID: use kobj_to_dev() HID: wiimote: use dev_to_wii() HID: add a new helper to_hid_driver() HID: use to_hid_device() HID: move to_hid_device() to hid.h HID: usbhid: use to_usb_device HID: corsair: Convert to use module_hid_driver HID: input: ignore the battery in OKLICK Laser BTmouse HID: wacom: Fix pad button range for CINTIQ_COMPANION_2 HID: wacom: Fix touchring value reporting HID: wacom: Report 'strip2' values in ABS_RY HID: wacom: Limit touchstrip data to 13 bits HID: wacom: bitwise vs logical ORs HID: wacom: Apply lowres quirk to BAMBOO_TOUCH devices HID: enable hid device to suspend/resume asynchronously ...
| *---. Merge branches 'for-4.4/upstream-fixes', 'for-4.5/async-suspend', ↵Jiri Kosina2016-01-141-0/+1
| |\ \ \ | | | | | | | | | | | | | | | 'for-4.5/container-of-cleanups', 'for-4.5/core', 'for-4.5/i2c-hid', 'for-4.5/logitech', 'for-4.5/multitouch', 'for-4.5/sony', 'for-4.5/upstream' and 'for-4.5/wacom' into for-linus
| | | * | HID: hid-logitech-hidpp: Add basic support for Logitech G920Simon Wood2015-11-201-0/+1
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic support for the Logitech G920 wheel when in HID mode. This wheel 'speaks' the HID++ protocol, and therefor is driven with hid-logitech-hidpp. At this stage the driver only shows that it can communicate with the wheel by outputting the name discovered over HID++. The normal HID functions work to give input functionality using joystick/event interface. Note: in 'hidpp_probe()' we have to start the hardware to get packets flowing, the same might apply in future for other devices which don't use the unifying protocol. Signed-off-by: Simon Wood <simon@mungewell.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE ChipsSrinivas Pandruvada2016-01-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This needs same quirk as applied to other YOGA sensor hubs. Refer to commit 21589ebda681 ("HID: sensor-hub: Add in quirk for Lenovo Yogas with ITE") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | HID: Add new PID for Microchip Pick16F1454Kristian Evensen2016-01-081-0/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | There seems to be a new version of the Microchip Pick16F1454 with a different PID (0xf2f7). This device should also be ignored by the HID driver. The PID was observed with the second version of the Yepkit Ykush USB hub. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge tag 'usb-4.4-rc5' of ↵Linus Torvalds2015-12-131-5/+0
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are a number of small USB fixes for 4.4-rc5. All of them have been in linux-next. The majority are gadget and phy issues, with a few new quirks and device ids added as well" * tag 'usb-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (32 commits) USB: add quirk for devices with broken LPM xhci: fix usb2 resume timing and races. usb: musb: fail with error when no DMA controller set usb: gadget: uvc: fix permissions of configfs attributes usb: musb: core: Fix pm runtime for deferred probe usb: phy: msm: fix a possible NULL dereference USB: host: ohci-at91: fix a crash in ohci_hcd_at91_overcurrent_irq usb: Quiet down false peer failure messages usb: xhci: fix config fail of FS hub behind a HS hub with MTT xhci: Fix memory leak in xhci_pme_acpi_rtd3_enable() usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message USB: whci-hcd: add check for dma mapping error usb: core : hub: Fix BOS 'NULL pointer' kernel panic USB: quirks: Apply ALWAYS_POLL to all ELAN devices usb-storage: Fix scsi-sd failure "Invalid field in cdb" for USB adapter JMicron USB: quirks: Fix another ELAN touchscreen usb: dwc3: gadget: don't prestart interrupt endpoints USB: serial: Another Infineon flash loader USB ID USB: cdc_acm: Ignore Infineon Flash Loader utility USB: cp210x: Remove CP2110 ID from compatibility list ...
| * | USB: quirks: Apply ALWAYS_POLL to all ELAN devicesAdrien Vergé2015-12-011-5/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | All ELAN hid devices seem to require the ALWAYS_POLL quirk. Let's use this quirk for all devices from this vendor, rather than maintaining a list of all its known product IDs. Tested-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Adrien Vergé <adrienverge@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | HID: usbhid: add Logitech G710+ keyboard quirk NOGETJimmy Berry2015-11-201-0/+1
|/ | | | | | | | Without quirk keyboard repeats '6' until volume control is used since it indicates the key is pressed without ever releasing. Signed-off-by: Jimmy Berry <jimmy@boombatower.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*-----. Merge branches 'for-4.3/upstream-fixes', 'for-4.4/corsair', ↵Jiri Kosina2015-11-061-0/+5
|\ \ \ \ | | | | | | | | | | | | | | | 'for-4.4/dragonrise', 'for-4.4/i2c-hid', 'for-4.4/logitech', 'for-4.4/microsoft', 'for-4.4/multitouch', 'for-4.4/roccat-sysfs-deprecation', 'for-4.4/upstream' and 'for-4.4/wacom' into for-linus
| | | | * HID: Add new Microsoft Type Cover 3 product IDDonavan Lance2015-09-231-0/+1
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | Adds support for Microsoft Type Cover 3 with 0x07e2 product ID. Signed-off-by: Donavan Lance <shvr@fedoraproject.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * HID: saitek: mode button quirk for Mad Catz R.A.T.5Harald Brinkmann2015-09-041-0/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the Saitek HID quirk for the mode button of the Mad Catz R.A.T.5 gaming mouse by adding the same quirk that's been neeeded for preivous versions. [jikos@kernel.org: update changelog a little bit] Signed-off-by: Harald Brinkmann <hbrinkmann@braincalibration.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: corsair: Add Corsair Vengeance K90 driverClément Vuchener2015-09-301-0/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | This patch implements a HID driver for the Corsair Vengeance K90 keyboard. It fixes the behaviour of the keys using incorrect HID usage codes and exposes the macro playback mode and current profile to the user space through sysfs attributes. It also adds two LED class devices controlling the "record" LED and the backlight. Signed-off-by: Clément Vuchener <clement.vuchener@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: sensor-hub: Add quirk for Lenovo Yoga 2 with ITE ChipsRitesh Raj Sarraf2015-10-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a follow-up to 47eeca8a48 (" HID: sensor-hub: Add in quirk for Lenovo Yogas with ITE") The Lenovo Yoga 2 13 seems to be sold in multiple variants with minor difference3s. IN my case, the USB ID for ITE chip is different than the Yoga 2 11 and Yoga 3 14. Without the quirk, no data is received from the accelerometer. I have verified the patch, testing this on 4.3-rc4 (and 4.2 stable). With this patch, proper orientation data is received. rrs@learner:~/Community/UpstreamSources/linux-upstream_GIT (stable-42)$ monitor-sensor ** Message: Accelerometer orientation changed: bottom-up ** Message: Light changed: 0.000000 (lux) ±** Message: Accelerometer orientation changed: left-up ** Message: Accelerometer orientation changed: bottom-up ** Message: Accelerometer orientation changed: left-up ** Message: Accelerometer orientation changed: normal ** Message: Light changed: 29.999999 (lux) monitor-sensor can be found in the iio-sensor-proxy tool. Signed-off-by: Ritesh Raj Sarraf <rrs@debian.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: usbhid: Fix for the WiiU adapter from MayflashOliver Schmitt2015-10-041-0/+1
|/ | | | | | | | | | | | | | | | | | The WiiU adapter from Mayflash (see http://www.mayflash.com/Products/NINTENDOWiiU/W009.html) is not working correctly. The "XInput" mode works fine, the controller is recognized as a xbox controller. But it is only possible to connect one controller with this method. In "DInput" mode the device is recognized as some kind of mouse input but no joystick is created. This commit will change this behavior with HID_QUIRK_MULTI_INPUT to split the device into 4 input devices so that it will also create joysticks in /dev/input/js*. Signed-off-by: Oliver Schmitt <voltumna@gmx.net> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'for-4.3/microsoft' into for-linusJiri Kosina2015-09-011-2/+3
|\ | | | | | | | | Conflicts: drivers/hid/usbhid/hid-quirks.c
| * HID: microsoft: Add Surface 3 type coverStephen Just2015-07-241-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Adding support for the Microsoft Surface 3 (non-pro) Type Cover. The existing definitions and quirks are actually for the Surface Pro 3 type covers. I've renamed the old constants to reflect that they belong to the Surface Pro 3, and added a new constant and matching code for the Surface 3. Signed-off-by: Stephen Just <stephenjust@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
| |
| \
| \
| \
| \
| \
| \
| \
| \
| \
*---------. \ Merge branches 'for-4.3/chicony', 'for-4.3/cp2112', 'for-4.3/i2c-hid', ↵Jiri Kosina2015-09-011-0/+9
|\ \ \ \ \ \ \ | | | |_|_|_|/ | | |/| | | | | | | | | | | 'for-4.3/lenovo', 'for-4.3/logitech', 'for-4.3/multitouch', 'for-4.3/picolcd', 'for-4.3/rmi', 'for-4.3/sensor-hub', 'for-4.3/sony' and 'for-4.3/wacom' into for-linus
| | | | | | * HID: sensor-hub: Add in quirk for Lenovo Yogas with ITEGuilhem Lettron2015-07-081-0/+3
| | | |_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Like yogas with TEXAS_INSTRUMENTS, yogas with ITE chips needs to be initialized with enumeration quirks. Signed-off-by: Jiri Kosina <jkosina@suse.com>
OpenPOWER on IntegriCloud