summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon/radeon_combios.c
Commit message (Collapse)AuthorAgeFilesLines
* drm/radeon/kms: fix hardcoded EDID handlingAlex Deucher2011-03-241-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | On some servers there is a hardcoded EDID provided in the vbios so that the driver will always see a display connected even if something like a KVM prevents traditional means like DDC or load detection from working properly. Also most server boards with DVI are not actually DVI, but DVO connected to a virtual KVM service processor. If we fail to detect a monitor via DDC or load detection and a hardcoded EDID is available, use it. Additionally, when using the hardcoded EDID, use a copy of it rather than the actual one stored in the driver as the detect() and get_modes() functions may free it if DDC is successful. This fixes the virtual KVM on several internal servers. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: add connector table for mac g5 9600Alex Deucher2011-02-141-0/+47
| | | | | | | | | | | | PPC Mac cards do not provide connector tables in their vbios. Their connector/encoder configurations must be hardcoded in the driver. verified by nyef on #radeon Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: dynamically allocate power state spaceAlex Deucher2011-02-041-0/+11
| | | | | | | | | | | | | We previously used a static array, but some new systems had more states then we had array space, so dynamically allocate space based on the number of states in the vbios. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33851 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge remote branch 'intel/drm-intel-next' of /ssd/git/drm-next into ↵Dave Airlie2010-12-221-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drm-core-next * 'intel/drm-intel-next' of /ssd/git/drm-next: (771 commits) drm/i915: Undo "Uncouple render/power ctx before suspending" drm/i915: Allow the application to choose the constant addressing mode drm/i915: dynamic render p-state support for Sandy Bridge drm/i915: Enable EI mode for RCx decision making on Sandybridge drm/i915/sdvo: Border and stall select became test bits in gen5 drm/i915: Add Guess-o-matic for pageflip timestamping. drm/i915: Add support for precise vblank timestamping (v2) drm/i915: Add frame buffer compression on Sandybridge drm/i915: Add self-refresh support on Sandybridge drm/i915: Wait for vblank before unpinning old fb Revert "drm/i915: Avoid using PIPE_CONTROL on Ironlake" drm/i915: Pass clock limits down to PLL matcher drm/i915: Poll for seqno completion if IRQ is disabled drm/i915/ringbuffer: Make IRQ refcnting atomic agp/intel: Fix missed cached memory flags setting in i965_write_entry() drm/i915/sdvo: Only use the SDVO pin if it is in the valid range drm/i915: Enable RC6 autodownclocking on Sandybridge drm/i915: Terminate the FORCE WAKE after we have finished reading drm/i915/gtt: Clear the cachelines upon resume drm/i915: Restore GTT mapping first upon resume ...
| * drm/radeon/kms: fix regression in rs4xx i2c setupAlex Deucher2010-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | typo in my last i2c rework. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=23222 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon/kms: parse the extended LCD info blockAlex Deucher2010-12-211-1/+2
|/ | | | | | | | This block may contain various additional LCD info such as physical size and a stored EDID. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: fix i2c pad masks on rs4xxAlex Deucher2010-11-191-0/+13
| | | | | | | | | These got lost in the last i2c cleanup. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=23222 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: make TV/DFP table info less verboseAlex Deucher2010-10-121-13/+13
| | | | | | | Make TV standard and DFP table revisions debug only. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: add connector table for Mac x800Alex Deucher2010-09-131-0/+47
| | | | | | | | Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28671 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: rework encoder handlingAlex Deucher2010-08-201-52/+52
| | | | | | | | | | On most newer asics, digital encoders have two links each and they can be used independantly. As such, treat them as separate encoders otherwise the individual links will not get programmed properly at modeset time. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: rework combios i2c handlingAlex Deucher2010-08-101-247/+168
| | | | | | | | | | Handle asic specific table to hw mappings in combios_setup_i2c_bus() directly. This allows us to remove most of the combios quirks and clean up the i2c bus setup. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: unify i2c handlingAlex Deucher2010-08-101-8/+69
| | | | | | | | | | | | Previously we added i2c buses as needed when enumerating connectors power management, etc. This only exposed the actual buses used and could have lead to the same buse getting created more than once if one buses was used for more than one purpose. This patch sets up all i2c buses on the card in one place and users of the buses just point back to the one instance. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms/igp: sideport is AMD onlyAlex Deucher2010-08-041-0/+4
| | | | | | | | Intel variants don't support it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: move a bunch of modesetting debug to correct debug usage.Dave Airlie2010-08-021-18/+18
| | | | | | | | This migrates a bunch of DRM_DEBUG->DRM_DEBUG_KMS so we can get more modesetting related info without all the other ioctl handling easily. Also the PM code moves to DRM_DEBUG_DRIVER mostly. Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge tag 'v2.6.35-rc6' into drm-radeon-nextDave Airlie2010-08-021-0/+8
|\ | | | | | | Need this to avoid conflicts with future radeon fixes
| * drm/radeon/kms: add quirk to make HP DV5000 laptop resumeAlex Deucher2010-07-221-0/+8
| | | | | | | | | | | | | | | | | | Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29062 Reported-by: Andres Cimmarusti <acimmarusti@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon/kms: minor driver cleanupsAlex Deucher2010-08-021-7/+4
|/ | | | | | | | | | - Make the logic in r100_pll_errata_after_index() match the other errata functions - Use rdev->family rather than rdev->flags & RADEON_FAMILY_MASK for kms - replace rn50 check using ids with ASIC_IS_RN50 convenience macro Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: remove rv100 bios connector quirkAlex Deucher2010-07-011-9/+0
| | | | | | | | | | | | Some RV100 cards with 2 VGA ports show up with DVI+VGA, however some boards with DVI+VGA have the same subsystem ids. Better to have a VGA port show up as DVI than having a non-useable DVI port. reported by DHR in irc. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: add quirk to make HP nx6125 laptop resume.Dave Airlie2010-07-011-0/+8
| | | | | | For some reason on resume, executing the BIOS scripts locks up the whole chipset, by avoiding the dynclk table the machine resumes properly and seems to function okay. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: add fake RN50 table for powerpcDave Airlie2010-07-011-0/+32
| | | | | | | This works well enough on a js21, but it would be nice if IBM could supply more tables for the later Power6/7 machines. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon: reset i2c valid to avoid incorrect tv-out polling.Dave Airlie2010-06-081-0/+2
| | | | | | | | | | | | We really don't want to be polling tv-out but since we weren't forcing the i2c lines to invalid (tv-out has no DDC), we were adding tv connectors to the polling setup and this was causing blinking on secondary displays. This fixes the regression Torsten reported. Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms/combios: fix typo in voltage fixAlex Deucher2010-06-081-1/+1
| | | | | | | Noticed by Rafał Miłecki. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms/pm: voltage fixesAlex Deucher2010-06-031-1/+6
| | | | | | | | - Enable GPIO voltage for non pm modes as well so resetting the default voltage works. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: hpd cleanupAlex Deucher2010-05-191-2/+2
| | | | | | | | - Use radeon hpd enum consistently (in both hotplug and dp) - Legacy r100 with DVI should be HPD_1 not NONE Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms/pm: add support for no display power statesAlex Deucher2010-05-181-1/+1
| | | | | | | | The lowest power states often cause display problems, so only enable them when all displays are off. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: minor pm cleanupsAlex Deucher2010-05-181-11/+4
| | | | | | | | - remove non_clock_info struct - track power state misc flags Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)Alex Deucher2010-05-181-5/+6
| | | | | | | | | | | | | | This also simplifies the code and enables reclocking with multiple heads active by tracking whether the power states are single or multi-head capable. Eventually, we will want to select a power state based on external factors (AC/DC state, user selection, etc.). (v2) Update for evergreen Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms/combios: match lvds panel info parsing to ddxAlex Deucher2010-05-181-12/+14
| | | | | | | Should work better on some panels. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge branch 'drm-edid-fixes' into drm-core-nextDave Airlie2010-04-201-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * drm-edid-fixes: drm/edid: When checking duplicate standard modes, walked the probed list drm/edid: Fix sync polarity for secondary GTF curve drm/modes: Fix interlaced mode names drm/edid: Add secondary GTF curve support drm/edid: Strengthen the algorithm for standard mode codes drm/edid: Fix the HDTV hack. drm/edid: Extend range-based mode addition for EDID 1.4 drm/edid: Add test for monitor reduced blanking support. drm/edid: Fix preferred mode parse for EDID 1.4 drm/edid: Remove some silly comments drm/edid: Remove arbitrary EDID extension limit drm/edid: Add modes for Established Timings III section drm/edid: Reshuffle mode list construction to closer match the spec drm/edid: Remove a redundant check drm/edid: Remove some misleading comments drm/edid: Fix secondary block fetch.
| * drm/edid: Remove arbitrary EDID extension limitAdam Jackson2010-04-061-4/+4
| | | | | | | | | | Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon/kms/combios: verify dac_adj values are validAlex Deucher2010-04-071-5/+15
|/ | | | | | | | | | | Some vbios dac_adj tables are all zeros. Check for that case and use the default table if so. Should fix fdo bug 27478. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge branch 'v2.6.34-rc2' into drm-linusDave Airlie2010-03-311-22/+22
|\
| * Merge branch 'drm-linus' of ↵Linus Torvalds2010-03-041-59/+231
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (151 commits) vga_switcheroo: disable default y by new rules. drm/nouveau: fix *staging* driver build with switcheroo off. drm/radeon: fix typo in Makefile vga_switcheroo: fix build on platforms with no ACPI drm/radeon: Fix printf type warning in 64bit system. drm/radeon/kms: bump the KMS version number for square tiling support. vga_switcheroo: initial implementation (v15) drm/radeon/kms: do not disable audio engine twice Revert "drm/radeon/kms: disable HDMI audio for now on rv710/rv730" drm/radeon/kms: do not preset audio stuff and start timer when not using audio drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond drm/ttm: fix function prototype to match implementation drm/radeon: use ALIGN instead of open coding it drm/radeon/kms: initialize set_surface_reg reg for rs600 asic drm/i915: Use a dmi quirk to skip a broken SDVO TV output. drm/i915: enable/disable LVDS port at DPMS time drm/i915: check for multiple write domains in pin_and_relocate drm/i915: clean-up i915_gem_flush_gpu_write_domain drm/i915: reuse i915_gpu_idle helper drm/i915: ensure lru ordering of fence_list ... Fixed trivial conflicts in drivers/gpu/vga/Kconfig
| * \ Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-02-251-22/+22
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits) of: remove undefined request_OF_resource & release_OF_resource of/sparc: Remove sparc-local declaration of allnodes and devtree_lock of: move definition of of_chosen into common code. of: remove unused extern reference to devtree_lock of: put default string compare and #a/s-cell values into common header of/flattree: Don't assume HAVE_LMB of: protect linux/of.h with CONFIG_OF proc_devtree: fix THIS_MODULE without module.h of: Remove old and misplaced function declarations of/flattree: Make the kernel accept ePAPR style phandle information of/flattree: endian-convert members of boot_param_header of: assume big-endian properties, adding conversions where necessary of: use __be32 for cell value accessors of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing of/flattree: use callback to setup initrd from /chosen proc_devtree: include linux/of.h of: make set_node_proc_entry private to proc_devtree.c of: include linux/proc_fs.h of/flattree: merge early_init_dt_scan_memory() common code of: add 'of_' prefix to machine_is_compatible() ...
| | * | of: add 'of_' prefix to machine_is_compatible()Grant Likely2010-02-091-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | machine is compatible is an OF-specific call. It should have the of_ prefix to protect the global namespace. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Michal Simek <monstr@monstr.eu>
* | | | drm/radeon/kms/r1xx: enable hw i2cAlex Deucher2010-03-151-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fixing the i2c prescale in the last patch gets it working on r1xx. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | | drm/radeon/kms: use lcd pll limits when availableAlex Deucher2010-03-151-0/+2
| |_|/ |/| | | | | | | | | | | | | | | | | | | | The bios has alternate pll output limits for LCD panels. If available, use these for pll divider calculations. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | drm/radeon/kms: simplify storing current and requested PM modeRafał Miłecki2010-02-231-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | We kept pointers to requested and current clock modes in every power state. That was useless, more /global/ pointers in power struct are enough. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | drm/radeon/kms: accept slightly overclocked power modesRafał Miłecki2010-02-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fixes fdo bug #26329 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Tobias Jakobi <liquid.acid@gmx.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | drm/radeon/kms: Test rdev->bios centrally in combios_get_table_offset().Michel Dänzer2010-02-111-36/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's happened time and time again (most recently with the support for EDID hardcoded in the BIOS ROM) that new code didn't check for rdev->bios being non-NULL before triggering dereferences of it. This would result in an oops/panic on setups with no BIOS ROM. Hopefully this central test will be more robust. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | drm/radeon/kms: add initial Evergreen support (Radeon HD 5xxx)Alex Deucher2010-02-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds initial Evergreen KMS support, it doesn't include any acceleration features or interrupt handling yet. Major changes are DCE4 handling for PLLs for the > 2 crtcs. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | drm/radeon/kms: add a power state type based on power state flagsAlex Deucher2010-02-091-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The idea is to flag a power state with a certain type and use that type to decide on what state to select. On r6xx+, we select a state and then transition between clock modes in that state. On pre-r6xx, we transition between states directly. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | drm/radeon/kms: pull power mode info from bios tables (v3)Alex Deucher2010-02-091-0/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The general idea is to validate the current hw state against the set of power states and select a power state based on that. This patch just pulls the power states from the bios and prints the information. It is not currently hooked up in the actual power management code. Hooking it up will require reworking the the current power state selection code and will be handled in a future patch. Additionally, we'd need to decide on some default lower power states for cards without power tables. v2 - increment state_index after checking for default state v3 - fix typo in pm init on pre-atom cards, handle pre-atom cards without x86 bioses Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | drm/radeon/kms: add support for hardcoded edids in rom (v2)Alex Deucher2010-02-091-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some servers hardcode an edid in rom so that they will work properly with KVMs. This is a port of the relevant code from the ddx. [airlied: reworked to validate edid at boot stage - and remove special quirk, if there is a valid EDID in the BIOS rom we'll just try and use it.] Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | drm/radeon/kms: add support for hw i2c on r1xx-r5xxAlex Deucher2010-02-091-4/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wire hw i2c support into radeon i2c algo. fixes merged: - handle bus probing correctly - use meaningful error numbers - abort if transaction fails - The line mapping is different depending on the asic. - protect hw i2c engine with a mutex - rs300 doesn't have a pin select bit - r200 has a different pin select setup Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | drm/radeon/kms: add radeon i2c algoAlex Deucher2010-02-051-23/+17
|/ / | | | | | | | | | | | | Currently just a wrapper around bit algo Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drivers/gpu/drm/radeon/radeon_combios.c: fix warningAndrew Morton2010-02-051-2/+1
|/ | | | | | | | | drivers/gpu/drm/radeon/radeon_combios.c: In function 'radeon_combios_get_lvds_info': drivers/gpu/drm/radeon/radeon_combios.c:893: warning: comparison is always false due to limited range of data type Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: Fix crash getting TV info with no BIOS.Michel Dänzer2010-01-131-0/+3
| | | | | Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: detect sideport memory on IGP chipsAlex Deucher2010-01-081-0/+14
| | | | | | | | | | This detects if the sideport memory is enabled and if it is VRAM is evicted on suspend/resume. This should fix s/r issues on some IGPs. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/radeon/kms: add primary dac adj values tableAlex Deucher2010-01-061-9/+41
| | | | | | | | | | | | | Look up primary dac adj values from the table if there is no bios or bios dac table to reference. The lookup table may need to be adjusted for certain families. Should fix kernel bug 14945. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
OpenPOWER on IntegriCloud