summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_uc.h
Commit message (Collapse)AuthorAgeFilesLines
* drm/i915/guc: Extract guc_init from guc_init_hwMichał Winiarski2017-12-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | After GPU reset, GuC HW needs to be reinitialized (with FW reload). Unfortunately, we're doing some extra work there (mostly allocating stuff), work that can be moved to guc_init and called once at driver load time. As a side effect we're no longer hitting an assert in i915_ggtt_enable_guc on suspend/resume. v2: Do not duplicate disable_communication / reset_guc_interrupts v3: Add proper teardown after rebase References: 04f7b24eccdf ("drm/i915/guc: Assert that we switch between known ggtt->invalidate functions") Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-3-michal.winiarski@intel.com
* drm/i915/guc: Move GuC workqueue allocations outside of the mutexMichał Winiarski2017-12-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This gets rid of the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 4.15.0-rc2-CI-Patchwork_7428+ #1 Not tainted ------------------------------------------------------ debugfs_test/1351 is trying to acquire lock: (&dev->struct_mutex){+.+.}, at: [<000000009d90d1a3>] i915_mutex_lock_interruptible+0x47/0x130 [i915] but task is already holding lock: (&mm->mmap_sem){++++}, at: [<000000005df01c1e>] __do_page_fault+0x106/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&mm->mmap_sem){++++}: __might_fault+0x63/0x90 _copy_to_user+0x1e/0x70 filldir+0x8c/0xf0 dcache_readdir+0xeb/0x160 iterate_dir+0xe6/0x150 SyS_getdents+0xa0/0x130 entry_SYSCALL_64_fastpath+0x1c/0x89 -> #5 (&sb->s_type->i_mutex_key#5){++++}: lockref_get+0x9/0x20 -> #4 ((completion)&req.done){+.+.}: wait_for_common+0x54/0x210 devtmpfs_create_node+0x130/0x150 device_add+0x5ad/0x5e0 device_create_groups_vargs+0xd4/0xe0 device_create+0x35/0x40 msr_device_create+0x22/0x40 cpuhp_invoke_callback+0xc5/0xbf0 cpuhp_thread_fun+0x167/0x210 smpboot_thread_fn+0x17f/0x270 kthread+0x173/0x1b0 ret_from_fork+0x24/0x30 -> #3 (cpuhp_state-up){+.+.}: cpuhp_issue_call+0x132/0x1c0 __cpuhp_setup_state_cpuslocked+0x12f/0x2a0 __cpuhp_setup_state+0x3a/0x50 page_writeback_init+0x3a/0x5c start_kernel+0x393/0x3e2 secondary_startup_64+0xa5/0xb0 -> #2 (cpuhp_state_mutex){+.+.}: __mutex_lock+0x81/0x9b0 __cpuhp_setup_state_cpuslocked+0x4b/0x2a0 __cpuhp_setup_state+0x3a/0x50 page_alloc_init+0x1f/0x26 start_kernel+0x139/0x3e2 secondary_startup_64+0xa5/0xb0 -> #1 (cpu_hotplug_lock.rw_sem){++++}: cpus_read_lock+0x34/0xa0 apply_workqueue_attrs+0xd/0x40 __alloc_workqueue_key+0x2c7/0x4e1 intel_guc_submission_init+0x10c/0x650 [i915] intel_uc_init_hw+0x29e/0x460 [i915] i915_gem_init_hw+0xca/0x290 [i915] i915_gem_init+0x115/0x3a0 [i915] i915_driver_load+0x9a8/0x16c0 [i915] i915_pci_probe+0x2e/0x90 [i915] pci_device_probe+0x9c/0x120 driver_probe_device+0x2a3/0x480 __driver_attach+0xd9/0xe0 bus_for_each_dev+0x57/0x90 bus_add_driver+0x168/0x260 driver_register+0x52/0xc0 do_one_initcall+0x39/0x150 do_init_module+0x56/0x1ef load_module+0x231c/0x2d70 SyS_finit_module+0xa5/0xe0 entry_SYSCALL_64_fastpath+0x1c/0x89 -> #0 (&dev->struct_mutex){+.+.}: lock_acquire+0xaf/0x200 __mutex_lock+0x81/0x9b0 i915_mutex_lock_interruptible+0x47/0x130 [i915] i915_gem_fault+0x201/0x760 [i915] __do_fault+0x15/0x70 __handle_mm_fault+0x85b/0xe40 handle_mm_fault+0x14f/0x2f0 __do_page_fault+0x2d1/0x560 page_fault+0x22/0x30 other info that might help us debug this: Chain exists of: &dev->struct_mutex --> &sb->s_type->i_mutex_key#5 --> &mm->mmap_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mm->mmap_sem); lock(&sb->s_type->i_mutex_key#5); lock(&mm->mmap_sem); lock(&dev->struct_mutex); *** DEADLOCK *** 1 lock held by debugfs_test/1351: #0: (&mm->mmap_sem){++++}, at: [<000000005df01c1e>] __do_page_fault+0x106/0x560 stack backtrace: CPU: 2 PID: 1351 Comm: debugfs_test Not tainted 4.15.0-rc2-CI-Patchwork_7428+ #1 Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0057.2017.0119.1758 01/19/2017 Call Trace: dump_stack+0x5f/0x86 print_circular_bug+0x230/0x3b0 check_prev_add+0x439/0x7b0 ? lockdep_init_map_crosslock+0x20/0x20 ? unwind_get_return_address+0x16/0x30 ? __lock_acquire+0x1385/0x15a0 __lock_acquire+0x1385/0x15a0 lock_acquire+0xaf/0x200 ? i915_mutex_lock_interruptible+0x47/0x130 [i915] __mutex_lock+0x81/0x9b0 ? i915_mutex_lock_interruptible+0x47/0x130 [i915] ? i915_mutex_lock_interruptible+0x47/0x130 [i915] ? i915_mutex_lock_interruptible+0x47/0x130 [i915] i915_mutex_lock_interruptible+0x47/0x130 [i915] ? __pm_runtime_resume+0x4f/0x80 i915_gem_fault+0x201/0x760 [i915] __do_fault+0x15/0x70 __handle_mm_fault+0x85b/0xe40 handle_mm_fault+0x14f/0x2f0 __do_page_fault+0x2d1/0x560 page_fault+0x22/0x30 RIP: 0033:0x7f98d6f49116 RSP: 002b:00007ffd6ffc3278 EFLAGS: 00010283 RAX: 00007f98d39a2bc0 RBX: 0000000000000000 RCX: 0000000000001680 RDX: 0000000000001680 RSI: 00007ffd6ffc3400 RDI: 00007f98d39a2bc0 RBP: 00007ffd6ffc33a0 R08: 0000000000000000 R09: 00000000000005a0 R10: 000055e847c2a830 R11: 0000000000000002 R12: 0000000000000001 R13: 000055e847c1d040 R14: 00007ffd6ffc3400 R15: 00007f98d6752ba0 v2: Init preempt_work unconditionally (Chris) v3: Mention that we need the enable_guc=1 for lockdep splat (Chris) Testcase: igt/debugfs_test/read_all_entries # with i915.enable_guc=1 Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-2-michal.winiarski@intel.com
* drm/i915/guc: Combine enable_guc_loading|submission modparamsMichal Wajdeczko2017-12-061-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently have two module parameters that control GuC: "enable_guc_loading" and "enable_guc_submission". Whenever we need submission=1, we also need loading=1. We also need loading=1 when we want to want to load and verify the HuC. Lets combine above module parameters into one "enable_guc" modparam. New supported bit values are: 0=disable GuC (no GuC submission, no HuC) 1=enable GuC submission 2=enable HuC load Special value "-1" can be used to let driver decide what option should be enabled for given platform based on hardware/firmware availability or preference. Explicit enabling any of the GuC features makes GuC load a required step, fallback to non-GuC mode will not be supported. v2: Don't use -EIO v3: define modparam bits (Chris) v4: rely on implicit cast (Chris) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-6-michal.wajdeczko@intel.com
* drm/i915/guc: Move GuC core definitions into dedicated filesMichal Wajdeczko2017-10-061-77/+1
| | | | | | | | | | | | | | | | | | | Move GuC core definitions into dedicated files as we want to keep GuC specific code in separated files. v2: move all functions in single patch (Joonas) fix old checkpatch issues (Sagar) v3: rebased Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> #1 Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-4-michal.wajdeczko@intel.com
* drm/i915/guc: Move GuC submission declarations into dedicated headerMichal Wajdeczko2017-10-061-45/+0
| | | | | | | | | | | | | | | | | Move GuC submission declarations into dedicated header as we want to keep uC specific code in separate files. v2: fix include (Chris) update commit message (Joonas) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: MichaĹ Winiarski <michal.winiarski@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-3-michal.wajdeczko@intel.com
* drm/i915/guc: Move GuC log declarations into dedicated headerMichal Wajdeczko2017-10-061-25/+1
| | | | | | | | | | | | | | | | | Move GuC log declarations into dedicated header as we want to keep component specific code in separate files. v2: fix includes (Chris) update commit message (Joonas) Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-2-michal.wajdeczko@intel.com
* drm/i915/huc: Move HuC declarations into dedicated headerMichal Wajdeczko2017-10-041-12/+1
| | | | | | | | | | | | | We want to keep each uC specific code in separate files. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-6-michal.wajdeczko@intel.com
* drm/i915/uc: Move uC fw helper code into dedicated filesMichal Wajdeczko2017-10-041-66/+1
| | | | | | | | | | | | | | | | | This is a prerequisite to unblock next steps. v2: correct include order (Joonas) v3: use common function prefix (Joonas) add kerneldoc (Michal) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-5-michal.wajdeczko@intel.com
* drm/i915/uc: Create intel_uc_init_mmioSagar Arun Kamble2017-10-041-0/+1
| | | | | | | | | | | | | | | | | | | This patch adds new function intel_uc_init_mmio which will initialize MMIO access related variables prior to uc load/init. v2: Removed unnecessary export of guc_send_init_regs. Created intel_uc_init_mmio that currently wraps guc_init_send_regs. (Michal) v3 (Michal): add kerneldoc (Joonas) Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-4-michal.wajdeczko@intel.com
* drm/i915/uc: Drop unnecessary forward declarationMichal Wajdeczko2017-10-041-2/+0
| | | | | | | | | | | We don't need it here. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-3-michal.wajdeczko@intel.com
* drm/i915/huc: Reorganize HuC authenticationSagar Arun Kamble2017-09-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepared intel_auth_huc to separate HuC specific functionality from GuC send action. Created new header intel_huc.h to group HuC specific declarations. v2: Changed argument preparation for AUTHENTICATE_HUC. s/intel_auth_huc/intel_huc_auth. Deferred creation of intel_huc.h to later patch. v3: Rebase as intel_guc.h is removed. Added param description to intel_huc_auth. (Michal) v4: Rebase as intel_guc.h is added again. :) v5: Rebase w.r.t removal of GuC code restructuring. v6-v7: Rebase. v8: Tagged subject as drm/i915/huc. (Michal Wajdeczko) Added kernel-doc description to intel_huc_auth and intel_guc_auth_huc. s/dev_priv/i915 and removed unnecessary variable offset. (Joonas) v9: Rebase. Had conflict with i915_modparams change. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1506410236-17926-1-git-send-email-sagar.a.kamble@intel.com
* drm/i915/guc: Cleanup adding GuC work itemsMichał Winiarski2017-09-181-4/+0
| | | | | | | | | | | | | | | | | | | | | | We can just operate on the wq_tail directly (in the process descriptor). This allows us to remove the duplicated tail from the client. While I'm here let's also remove the constants kept in the client and document our locking requirements. This causes a small change in one of GuC debugfs files. We're no longer reporting constant values (which I don't think is a problem), but we're also no longer reporting the tail (does anyone care?). v2: Update tail after wqi contents. (Chris) v3: Really update tail after wqi contents. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170918092536.12287-1-michal.winiarski@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* drm/i915/guc: Simplify GuC doorbell logicMichał Winiarski2017-09-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | All we're really doing is incrementing a simple counter in a doorbell_info struct. We can do without extra variables and a separate counter kept in guc_client. Since it's gone, we're also removing its debugfs. The only functional change here, is that we're no longer treating 0 as a special value. GuC doesn't seem to care, why should we? v2: Restore desc->tail update. v3: Drop the retry loop, assert that doorbell cookie doesn't change behind our back. v4: WARN rather than BUG, use xchg. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170914105125.3031-1-michal.winiarski@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* drm/i915/guc: Submit GuC workitems containing coalesced requestsMichał Winiarski2017-09-181-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | To create an upper bound on number of GuC workitems, we need to change the way that requests are being submitted. Rather than submitting each request as an individual workitem, we can do coalescing in a similar way we're handlig execlist submission ports. We also need to stop pretending that we're doing "lite-restore" in GuC submission (we would create a workitem each time we hit this condition). This allows us to completely remove the reservation, replacing it with a compile time check. v2: Also coalesce when replaying on reset (Daniele) v3: Consistent wq_resv - per-request (Daniele) v4: Squash removing wq_resv v5: Reflect i915_guc_submit argument changes in doc v6: Rebase on top of execlists reset/restart fix (Chris,Michał) References: https://bugs.freedesktop.org/show_bug.cgi?id=101873 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-2-michal.winiarski@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* drm/i915/guc: Remove obsolete comments and remove unused variableMichał Winiarski2017-09-181-4/+0
| | | | | | | | | | | | | | | | | | Originally removed in: c1adab970348 ("drm/i915/guc: Remove failed doorbell stat from debugfs") f1448a62a103 ("drm/i915/guc: Remove last submission result from debugfs") Were accidentally restored in: 925344ccc91d ("BackMerge tag 'v4.12-rc5' into drm-next") We can also remove unused variable and replace it with a WARN. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-1-michal.winiarski@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* BackMerge tag 'v4.12-rc5' into drm-nextDave Airlie2017-06-161-0/+4
|\ | | | | | | Linux 4.12-rc5 for nouveau fixes
| * drm/i915/guc: Remove stale comment for q_failMichal Wajdeczko2017-06-071-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This member was dropped long time ago. Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 4afc67be8e203ee8f5e95e829c0777eae7a14702) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* | drm/i915/guc: capture GuC logs if FW fails to loadDaniele Ceraolo Spurio2017-05-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We're currently deleting the GuC logs if the FW fails to load, but those are still useful to understand why the loading failed. Keeping the object around allows us to access them after driver load is completed. v2: keep the object around instead of using kernel memory (chris) don't store the logs in the gpu_error struct (Chris) add a check on guc_log_level to avoid snapshotting empty logs v3: use separate debugfs for error log (Chris) v4: rebased v5: clean up obj selection, move err_load inside guc_log, move err_load cleanup, rename functions (Michal) v6: move obj back to intel_guc, move functions to intel_uc.c, don't clear obj on new GuC load, free object only if enable_guc_loading is set (Michal) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495475428-19295-1-git-send-email-daniele.ceraolospurio@intel.com Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | drm/i915/guc: Introduce buffer based cmd transportMichal Wajdeczko2017-05-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffer based command transport can replace MMIO based mechanism. It may be used to perform host-2-guc and guc-to-host communication. Portions of this patch are based on work by: Michel Thierry <michel.thierry@intel.com> Robert Beckett <robert.beckett@intel.com> Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> v2: use gem_object_pin_map (Chris) don't use DEBUG_RATELIMITED (Chris) don't track action stats (Chris) simplify next fence (Chris) use READ_ONCE (Chris) move blob allocation to new function (Chris) v3: use static owner id (Daniele) v4: but keep channel initialization generic (Daniele) and introduce owner_sub_id (Daniele) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170526111326.87280-3-michal.wajdeczko@intel.com
* | drm/i915/guc: Remove action status and statistics from debugfsMichal Wajdeczko2017-05-191-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usefulness of these stats was over-advertised. v2: remove duplicated engine stats (Chris) Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170515170610.35528-1-michal.wajdeczko@intel.com Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | drm/i915/guc: Remove last submission result from debugfsMichal Wajdeczko2017-05-191-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Debugfs does not seems to be a right place to display transient data. If we want to capture errors, we should log them. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-3-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | drm/i915/guc: Remove failed doorbell stat from debugfsMichal Wajdeczko2017-05-191-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This stat is almost always zero unless fatal error occurs, which should be reported by other means anyway. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-2-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | drm/i915/guc: Remove stale comment for q_failMichal Wajdeczko2017-05-191-2/+0
| | | | | | | | | | | | | | | | | | | | | | This member was dropped long time ago. Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | drm/i915/guc: Make scratch register base and count flexibleMichal Wajdeczko2017-05-111-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are using some scratch registers in MMIO based send function. Make their base and count flexible in preparation of upcoming GuC firmware/hardware changes. While around, change cmd len parameter verification from WARN_ON to GEM_BUG_ON as we don't need this all the time. v2: call out WARN/GEM_BUG change in the commit msg (Daniele) v3: don't overqualify the ints (Chris) v4: rebase and use proper enum Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* | drm/i915/guc: Move notification code into virtual functionMichal Wajdeczko2017-05-111-0/+9
| | | | | | | | | | | | | | | | | | | | | | Prepare for alternate GuC notification mechanism. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> [Joonas: Added newlines] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* | drm/i915/guc: Enable send function only after successful initMichal Wajdeczko2017-05-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It is safer to setup valid send function after successful GuC hardware initialization. In addition we prepare placeholder where we can setup any alternate GuC communication mechanism. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170502103243.54940-1-michal.wajdeczko@intel.com [ickle: Fixup ENODEV for an impossible error path] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | drm/i915/huc: Simplify intel_huc_init_hw()Michal Wajdeczko2017-04-041-1/+1
|/ | | | | | | | | | | | | | On last guc/huc cleanup series we've simplified guc init hw function but missed the one for the huc. While here, change its signature as we don't care about huc loading status. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170331115709.181940-1-michal.wajdeczko@intel.com
* drm/i915/uc: Drop use of MISSING_CASE on trivial enumsMichal Wajdeczko2017-03-311-6/+2
| | | | | | | | | | | | | We can rely on compiler to notify us if we miss any case. This approach may also reduce driver size (reported ~4K). Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170331102652.177664-1-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* drm/i915/huc: Remove unused intel_huc_fini()Michal Wajdeczko2017-03-311-1/+0
| | | | | | | | | | | This function is no longer used. Its functionality is covered by intel_uc_fini_fw(). Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/uc: Add intel_uc_fw_type_repr()Michal Wajdeczko2017-03-311-0/+14
| | | | | | | | | | | | | Some of the DRM_NOTE messages are just using "uC" without specifying which uc they are related to. We can be more user friendly. v2: moved to the header (Joonas) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/uc: Move intel_uc_fw_status_repr() to intel_uc.hMichal Wajdeczko2017-03-311-1/+19
| | | | | | | | | | | | The file fits better. Also use "<invalid>" for invalid case. v2: move directly to .h (Joonas) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/uc: Make intel_uc_prepare_fw() staticMichal Wajdeczko2017-03-271-2/+0
| | | | | | | | | | | | | | There is no need to expose this function as it is called from one function only. Also move it up to avoid forward declaration. v2: drop intel_ prefix (Oscar) and rename to fetch_uc_fw (Michal) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170327094510.167400-1-michal.wajdeczko@intel.com Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* drm/i915/guc: Refactor the concept "GuC context descriptor" into "GuC stage ↵Oscar Mateo2017-03-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | descriptor" A GuC context and a HW context are in no way related, so the name "GuC context descriptor" is very unfortunate, because a new reader of the code gets overwhelmed very quickly with a lot of things called "context" that refer to different things. We can improve legibility a lot by simply renaming a few objects in the GuC code. v2: - Rebased - s/ctx_desc_pool/stage_desc_pool - Move some explanations to the definition of the guc_stage_desc struct (Chris) v3: - Calculate gemsize with less intermediate steps (Joonas) - Use BIT() macro (Joonas) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/guc: Improve the GuC documentation & comments about proxy submissionsOscar Mateo2017-03-231-2/+4
| | | | | | | | | | | | | | | | While at it, fix a typo (s/ring_lcra/ring_lrca) and improve the naming of one firware interface field (s/ring_tail/submit_element_info, since it can contain more than just the ring tail). No change in functionality. v2: - Remove reference to "unique user" of the GuC (Daniele) - Keep mention to renaming from "GuC context" to "client" (Daniele) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/guc: Make intel_guc_send a function pointerOscar Mateo2017-03-231-1/+8
| | | | | | | | | | | | | | | Prepare for an alternate GuC communication interface. v2: Make a few functions static and name them correctly while we are at it (Oscar), but leave an intel_guc_send_mmio interface for users that require old-style communication. v3: Send intel_uc_init_early back to the top (Michal). Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/guc: Break out the GuC log extras into their own "runtime" structOscar Mateo2017-03-231-5/+7
| | | | | | | | | | | | | | | | | | When initializing the GuC log struct, there is an object we need to allocate always, since the GuC needs its address at fw load time. The rest is only needed during runtime, in the sense that we only create if we actually enable GuC logging. Make that distinction explicit by subdividing further the intel_guc_log struct. v2: Call the new struct "runtime", instead of "extras" (Joonas) v3: Check indent (Joonas) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/guc: Add onion teardown to the GuC setupOscar Mateo2017-03-231-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with intel_guc_loader, down to intel_guc_submission and finally to intel_guc_log. v2: - Null execbuf client outside guc_client_free (Daniele) - Assert if things try to get allocated twice (Daniele/Joonas) - Null guc->log.buf_addr when destroyed (Daniele) - Newline between returning success and error labels (Joonas) - Remove some unnecessary comments (Joonas) - Keep guc_log_create_extras naming convention (Joonas) - Helper function guc_log_has_extras (Joonas) - No need for separate relay_channel create/destroy. It's just another extra. - No need to nullify guc->log.flush_wq when destroyed (Joonas) - Hoist the check for has_extras out of guc_log_create_extras (Joonas) - Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele) - Make sure initel_guc_fini is not called before init is ever called (Daniele) v3: - Remove unnecessary parenthesis (Joonas) - Check for logs enabled on debugfs registration - Rebase on top of Tvrtko's "Fix request re-submission after reset" v4: - Rebased - Comment around enabling/disabling interrupts inside GuC logging (Joonas) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/guc: Keep the ctx_pool_vaddr mapped, for easy accessOscar Mateo2017-03-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | The GuC descriptor is big in size. If we use a local definition of guc_desc we have a chance to overflow stack, so avoid it. Also, Chris abhors scatterlists :) v2: Rebased, helper function to retrieve the context descriptor, s/ctx_pool_vma/ctx_pool/ v3: Zero out guc_context_desc before initialization v4: Do not do arithmetic on void pointers (Daniele) v5: Nicer than arithmetic on pointers (Chris, Joonas) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/guc: Sanitize GuC client initializationJoonas Lahtinen2017-03-231-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Started adding proper teardown to guc_client_alloc, ended up removing quite a few dead ends where errors communicating with the GuC were silently ignored. There also seemed to be quite a few erronous teardown actions performed in case of an error (ordering wrong). v2: - Increase function symmetry/proximity (Michal/Daniele) - Fix __reserve_doorbell accounting for high priority (Daniele) - Call __update_doorbell_desc! (Daniele) - Isolate __guc_{,de}allocate_doorbell (Michal/Daniele) v3: - "Select" a cacheline is a more accurate verb than "reserve" (Daniele). - We cannot update & create the doorbell without reserving it first, so move the whole doorbell creation for execbuf_client to the submission enable (Oscar).i - Add a fixme for ignoring possible doorbell destroy errors. v4: - Remove comment about is_high_priority (Daniele) - Debug message typo (Daniele) - Reuse __get_doorbell in more places (Daniele) - Do not do arithmetic on void pointers (Daniele) - Add comment to __reset_doorbell (Daniele) v5: - gccisms like arithmetic on void pointers are not frowned upon (Oscar) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
* drm/i915/uc: Rename intel_uc_fw.fw to .typeArkadiusz Hiler2017-03-161-1/+1
| | | | | | | | | | | | | | This field is used to determine which kind of firmware the struct describes (GuC/HuC) - the name does not reflect. The enum used here have "type" in the name, so let's go with that. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315133415.15343-1-arkadiusz.hiler@intel.com
* drm/i915/uc: Separate firmware selection and preparationArkadiusz Hiler2017-03-151-2/+2
| | | | | | | | | | | | | | | | | intel_{h,g}uc_init_fw selects correct firmware and then triggers it's preparation (fetch + initial parsing). This change separates out select steps, so those can be called by the sanitize_options(). Then, during the init_fw(), we prepare the firmware if the firmware was selected. Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/guc: Simplify intel_guc_init_hw()Arkadiusz Hiler2017-03-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Current version of intel_guc_init_hw() does a lot: - cares about submission - loads huc - implement WA This change offloads some of the logic to intel_uc_init_hw(), which now cares about the above. v2: rename guc_hw_reset and fix typo in define name (M. Wajdeczko) v3: rename once again v4: remove spurious comments and add some style (J. Lahtinen) v5: flow changes, got rid of dead checks (M. Wajdeczko) v6: rebase v7: rebase & onion teardown (J. Lahtinen) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/guc: Extract param logic form guc_init_fw()Arkadiusz Hiler2017-03-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Let intel_guc_init_fw() focus on determining and fetching the correct firmware. This patch introduces intel_uc_sanitize_options() that is called from intel_sanitize_options(). Then, if we have GuC, we can call intel_guc_init_fw() conditionally and we do not have to do the internal checks. v2: fix comment, notify when nuking GuC explicitly enabled (M. Wajdeczko) v3: fix comment again, change the nuke message (M. Wajdeczko) v4: update title to reflect new function name + rebase v5: text && remove 2 uneccessary checks (M. Wajdeczko) Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/uc: Introduce intel_uc_init_fw()Arkadiusz Hiler2017-03-151-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of calling intel_guc_init() and intel_huc_init() one by one this patch introduces intel_uc_init_fw() function that calls them both. Called functions are renamed accordingly. Trying to have subject_verb_object ordering and more descriptive names, the intel_huc_init() and intel_guc_init() functions are renamed. For guc_init(): * `intel_guc` is the subject, so those functions now take intel_guc structure, instead of the dev_priv * init is the verb * fw is the object which better describes the function's role huc_init() change follows the same reasoning. v2: settle on intel_uc_fetch_fw name (M. Wajdeczko) v3: yet another rename - intel_uc_init_fw (J. Lahtinen) v4: non-trivial rebase Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/uc: Move intel_uc_fw_fetch() to intel_uc.cArkadiusz Hiler2017-03-151-2/+2
| | | | | | | | | | | | | | | | | | | | | The file fits better. Additionally rename it to intel_uc_prepare_fw(), as the function does more than simple fetch. `obj` cleanup in the function is also fixed (i.e. removed). In the fail scenario it was always 'put' but there's no possible flow that initializes the obj properly and then goes to the fail label. v2: remove second declaration, reorder (M. Wajdeczko) v3: non-trivial rebase v4: remove obj cleanup in the fail scenario (C. Wilson) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/uc: Rename intel_?uc_{setup, load}() to _init_hw()Arkadiusz Hiler2017-03-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | GuC historically has two "startup" functions called _init() and _setup() Then HuC came with it's _init() and _load(). This commit renames intel_guc_setup() and intel_huc_load() to *uc_init_hw() as they called from the i915_gem_init_hw(). The aim is to be consistent in that entry points called during particular driver init phases (e.g. init_hw) are all suffixed by that phase. When reading the leaf functions, it should be clear at what stage during the driver load it is called and therefore what operations are legal at that point. Also, since the functions start with intel_guc and intel_huc they take appropiate structure. v2: commit message update (Chris Wilson) v3: change taken parameters to be more "semantic" (M. Wajdeczko) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/uc: Drop superfluous externs in intel_uc.hArkadiusz Hiler2017-03-151-6/+6
| | | | | | | | | Externs are implicit and we generally try to avoid them. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* drm/i915/huc: Support HuC authenticationAnusha Srivatsa2017-01-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HuC authentication is done by host2guc call. The HuC RSA keys are sent to GuC for authentication. v2: rebased on top of drm-tip. Changed name format and upped version 1.7. v3: changed wait_for_atomic to wait_for v4: rebased. Rename intel_huc_auh() to intel_guc_auth_huc() and place the prototype in intel_guc.h,correct the comments. v5: rebased. Moved intel_guc_auth_huc from i915_guc_submission.c to intel_uc.c.Update dev to dev_priv in intel_guc_auth_huc(). Renamed HOST2GUC_ACTION_AUTHENTICATE_HUC TO INTEL_GUC_ACTION_ AUTHENTICATE_HUC v6: rebased. Add newline on DRM_ERRORs that already dont have one. v7: rebased. Replace wait_for with intel_wait_for_register() since the latter employs sleep optimisations for quick responses- as pointed out by Chris Wilson. v8: rebased. Cleanup the intel_guc_auth_huc() by removing checks already performed in earlier functions. Make comments more descriptive. v9: rebased. Changed the bias for pinning the HuC object. Move intel_guc_auth_huc() to intel_huc.c. Change DRM_DEBUGs to DRM_ERRORs in intel_guc_auth_huc(). Add return status to DRM_ERRORs. v10: Remove message not required for the user.. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Xiang Haihao <haihao.xiang@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-5-git-send-email-anusha.srivatsa@intel.com
* drm/i915/huc: Add HuC fw loading supportAnusha Srivatsa2017-01-191-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases. HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them. v2: rebased on-top of drm-intel-nightly. removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format. v3: rebased to drm-intel-nightly, changed the file name format to match the one in the huc package. Changed dev->dev_private to to_i915() v4: moved function back to where it was. change wait_for_atomic to wait_for. v5: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern. v6: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in- https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin> v7: Change dev to dev_priv in macro definition. Corrected comments. v8: rebased on top of drm-tip. Updated functions intel_huc_load(), intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents of intel_huc.h to intel_uc.h. v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size(). Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to simply fw to avoid redundency. v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv instead of dev like intel_huc_init() and intel_huc_load().Move definition to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable WARNs to give extra info. v11: rebased. Add proper bias for HuC and make sure there are asserts on failure by using guc_ggtt_offset_vma(). Introduce intel_huc.c and remove intel_huc_loader.c since it has functions that do more than just loading.Correct year in copyright. v12: remove invalidates that are not required anymore. Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Xiang Haihao <haihao.xiang@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-1-git-send-email-anusha.srivatsa@intel.com
* drm/i915/huc: Unified css_header struct for GuC and HuCAnusha Srivatsa2017-01-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | HuC firmware css header has almost exactly same definition as GuC firmware except for the sw_version. Also, add a new member fw_type into intel_uc_fw to indicate what kind of fw it is. So, the loader will pull right sw_version from header. v2: rebased on-top of drm-intel-nightly v3: rebased. Rename device_id to guc_branch_client_version, make guc_sw_version a union. <Jeff Mcgee>. Put UC_FW_TYPE_GUC and UC_FW_TYPE_HUC into an enum. v4: rebased on top of drm-tip.Update dev to dev_priv in intel_uc_fw_fetch. v5: rebased. Add INTEL_ prefix to an enum. Add fw_type declaration from patch 1.Combine two different unions for huc and guc version, reserved etc into one union with two structs. v6: rebased. Change fw_type to enum. v7: rebased. Rename the enum fw_type to intel_uc_fw_type. Cc: Michal Wajdeczko <michal.wajdeczko.@intel.com> Tested-by: Xiang Haihao <haihao.xiang@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-3-git-send-email-anusha.srivatsa@intel.com
OpenPOWER on IntegriCloud